this allows compiling on a host that has xterm installed --- debian/control | 1 - 1 file changed, 1 deletion(-) diff --git a/debian/control b/debian/control index 5be8802..bafef22 100644 --- a/debian/control +++ b/debian/control @@ -22,7 +22,6 @@ Build-Conflicts: x11proto-randr-dev, x11proto-record-dev, x11proto-xinerama-dev, - xbitmaps, Standards-Version: 3.9.3 Homepage: http://code.x2go.org/gitweb?p=nx-libs.git;a=summary Vcs-Git: git://code.x2go.org/nx-libs.git -- 1.7.10.4

According to lintian, this is a severe error. Demote to recommends to ensure that it still gets installed by default. --- debian/control | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/debian/control b/debian/control index bafef22..be83f79 100644 --- a/debian/control +++ b/debian/control @@ -76,9 +76,10 @@ Package: nxagent Architecture: any Depends: libnx-x11 (>= ${source:Version}), libnx-x11 (<< ${source:Version}.1~), - xfonts-base, ${shlibs:Depends}, ${misc:Depends}, +Recommends: + xfonts-base, Description: NX agent NX is a software suite which implements very efficient compression of the X11 protocol. This increases performance when -- 1.7.10.4

If stricter dependencies are really required, they should absolutely be specified in the slibs file instead --- debian/control | 21 ++++++++------------- 1 file changed, 8 insertions(+), 13 deletions(-) diff --git a/debian/control b/debian/control index be83f79..78cc0b4 100644 --- a/debian/control +++ b/debian/control @@ -32,7 +32,7 @@ Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, -Breaks: nxlibs (<=3.5.1) +Breaks: nxlibs (<= 3.5.1) Replaces: nxlibs Description: nx-X11 NX is a software suite which implements very efficient @@ -48,7 +48,7 @@ Architecture: any Breaks: nxlibs-dev (<=3.5.1) Replaces: nxlibs-dev Depends: - libnx-x11 (>= ${source:Version}), libnx-x11 (<< ${source:Version}.1~), + libnx-x11 (= ${binary:Version}), ${misc:Depends}, Description: Library headers for nx-X11 NX is a software suite which implements very efficient @@ -62,7 +62,7 @@ Package: libnx-mesa-extras-dev Section: libdevel Architecture: any Depends: - libnx-x11-dev (>= ${source:Version}), libnx-x11-dev (<< ${source:Version}.1~), + libnx-x11-dev (= ${binary:Version}), ${misc:Depends}, Description: Library headers for nx-X11 (extra headers) NX is a software suite which implements very efficient @@ -75,7 +75,6 @@ Description: Library headers for nx-X11 (extra headers) Package: nxagent Architecture: any Depends: - libnx-x11 (>= ${source:Version}), libnx-x11 (<< ${source:Version}.1~), ${shlibs:Depends}, ${misc:Depends}, Recommends: @@ -102,7 +101,7 @@ Description: NX agent Package: x2goagent Architecture: all Depends: - nxagent (>= ${source:Version}), nxagent (<< ${source:Version}.1~), + nxagent (>= ${source:Version}) ${misc:Depends}, Suggests: x2goserver @@ -124,7 +123,6 @@ Description: X2Go agent Package: nxproxy Architecture: any Depends: - libxcomp3 (>= ${source:Version}), libxcomp3 (<< ${source:Version}.1~), ${shlibs:Depends}, ${misc:Depends}, Description: NX proxy @@ -137,7 +135,6 @@ Description: NX proxy Package: nxauth Architecture: any Depends: - libnx-x11 (>= ${source:Version}), libnx-x11 (<< ${source:Version}.1~), ${shlibs:Depends}, ${misc:Depends}, Description: NX xauth @@ -152,7 +149,7 @@ Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, -Breaks: nxcomp (<=3.5.1) +Breaks: nxcomp (<= 3.5.1) Replaces: nxcomp Description: NX X compression library NX is a software suite which implements very efficient @@ -179,7 +176,6 @@ Description: NX X compression library headers Package: libxcompext3 Architecture: any Depends: - libnx-x11 (>= ${source:Version}), libnx-x11 (<< ${source:Version}.1~), ${shlibs:Depends}, ${misc:Depends}, Breaks: nxcompext (<=3.5.1) @@ -195,7 +191,7 @@ Package: libxcompext-dev Architecture: any Section: libdevel Depends: - libxcompext3 (=${binary:Version}), + libxcompext3 (= ${binary:Version}), ${misc:Depends}, libxcomp-dev, Breaks: nxcompext-dev (<=3.5.1) @@ -212,7 +208,6 @@ Package: libxcompshad3 Section: x11 Architecture: any Depends: - libnx-x11 (>= ${source:Version}), libnx-x11 (<< ${source:Version}.1~), ${shlibs:Depends}, ${misc:Depends}, Breaks: nxcompshad (<=3.5.1) @@ -228,9 +223,9 @@ Package: libxcompshad-dev Section: libdevel Architecture: any Depends: - libxcompshad3 (=${binary:Version}), + libxcompshad3 (= ${binary:Version}), ${misc:Depends}, -Breaks: nxcompshad-dev (<=3.5.1) +Breaks: nxcompshad-dev (<= 3.5.1) Replaces: nxcompshad-dev Description: NX shadowing library headers NX is a software suite which implements very efficient -- 1.7.10.4

this makes debian/rules a bit easier to read --- debian/pre-build-nx.sh | 12 ------------ debian/rules | 9 ++++++++- 2 files changed, 8 insertions(+), 13 deletions(-) delete mode 100755 debian/pre-build-nx.sh diff --git a/debian/pre-build-nx.sh b/debian/pre-build-nx.sh deleted file mode 100755 index 59a8a47..0000000 --- a/debian/pre-build-nx.sh +++ /dev/null @@ -1,12 +0,0 @@ -#!/bin/sh - -# create copies of upstream changelogs so that names apply to Debian policy... -cp -a nx-X11/CHANGELOG nx-X11/changelog -cp -a nxcomp/CHANGELOG nxcomp/changelog -cp -a nxcompext/CHANGELOG nxcompext/changelog -cp -a nxcompshad/CHANGELOG nxcompshad/changelog -cp -a nx-X11/programs/Xserver/hw/nxagent/CHANGELOG nx-X11/programs/Xserver/hw/nxagent/changelog -cp -a nx-X11/programs/nxauth/CHANGELOG nx-X11/programs/nxauth/changelog -cp -a nxproxy/CHANGELOG nxproxy/changelog - -exit 0 diff --git a/debian/rules b/debian/rules index cbd600a..79ca44f 100755 --- a/debian/rules +++ b/debian/rules @@ -26,7 +26,14 @@ override_dh_clean: dh_clean override_dh_auto_build: - debian/pre-build-nx.sh + # create copies of upstream changelogs so that names apply to Debian policy... + cp -a nx-X11/CHANGELOG nx-X11/changelog + cp -a nxcomp/CHANGELOG nxcomp/changelog + cp -a nxcompext/CHANGELOG nxcompext/changelog + cp -a nxcompshad/CHANGELOG nxcompshad/changelog + cp -a nx-X11/programs/Xserver/hw/nxagent/CHANGELOG nx-X11/programs/Xserver/hw/nxagent/changelog + cp -a nx-X11/programs/nxauth/CHANGELOG nx-X11/programs/nxauth/changelog + cp -a nxproxy/CHANGELOG nxproxy/changelog LD_LIBRARY_PATH=`pwd`/debian/libnx-x11/usr/lib/nx/X11:$$LD_LIBRARY_PATH dh_auto_build --with quilt debian/post-build-nx.sh -- 1.7.10.4

Instead, place the makefile into debian/Makefile.nx-libs. This makes the makefile easier to edit. --- debian/Makefile.nx-libs | 51 +++++++++++ .../patches/001_add-main-makefile.full+lite.patch | 93 -------------------- debian/patches/series | 1 - debian/rules | 2 + 4 files changed, 53 insertions(+), 94 deletions(-) create mode 100644 debian/Makefile.nx-libs delete mode 100644 debian/patches/001_add-main-makefile.full+lite.patch diff --git a/debian/Makefile.nx-libs b/debian/Makefile.nx-libs new file mode 100644 index 0000000..3151be2 --- /dev/null +++ b/debian/Makefile.nx-libs @@ -0,0 +1,51 @@ +#!/usr/bin/make -f + +PREFIX ?= /usr/local +CONFIGURE=./configure + +%: + if test -f bin/Makefile; then ${MAKE} -C bin $@; fi + if test -f nxcomp/Makefile; then ${MAKE} -C nxcomp $@; fi + if test -f nxproxy/Makefile; then ${MAKE} -C nxproxy $@; fi + if test -d nx-X11; then \ + if test -f nxcompext/Makefile; then ${MAKE} -C nxcompext $@; fi; \ + if test -f nxcompshad/Makefile; then ${MAKE} -C nxcompshad $@; fi; \ + if test -f nx-X11/Makefile; then ${MAKE} -C nx-X11 $@; fi; \ + fi + +all: build + +test: + echo "No testing for NX (redistributed)" + +build-lite: + cd nxcomp && autoconf && (${CONFIGURE}) && ${MAKE} + cd nxproxy && autoconf && (${CONFIGURE}) && ${MAKE} + +build-full: +# in the full case, we rely on "magic" in the nx-X11 imake-based makefiles... + cd nxcomp && autoconf + cd nxcompext && autoconf + cd nxcompshad && autoconf + cd nx-X11 && ${MAKE} World + cd nxproxy && autoconf && (${CONFIGURE}) && ${MAKE} + +build: + if ! test -d nx-X11; then \ + ${MAKE} build-lite; \ + else \ + ${MAKE} build-full; \ + fi + +uninstall: + if test -f bin/Makefile; then ${MAKE} -C bin $@; fi + if test -f nxcomp/Makefile; then ${MAKE} -C nxcomp $@; fi + if test -f nxproxy/Makefile; then ${MAKE} -C nxproxy $@; fi + if test -d nx-X11; then \ + if test -f nxcompext/Makefile; then ${MAKE} -C nxcompext $@; fi; \ + if test -f nxcompshad/Makefile; then ${MAKE} -C nxcompshad $@; fi; \ + if test -f nx-X11/Makefile; then \ + if test -d $(PREFIX)/lib/nx; then rm -rf $(PREFIX)/lib/nx; fi; \ + if test -d $(PREFIX)/include/nx; then rm -rf $(PREFIX)/include/nx; fi; \ + fi; \ + fi diff --git a/debian/patches/001_add-main-makefile.full+lite.patch b/debian/patches/001_add-main-makefile.full+lite.patch deleted file mode 100644 index 6bbf70b..0000000 --- a/debian/patches/001_add-main-makefile.full+lite.patch +++ /dev/null @@ -1,93 +0,0 @@ -Description: Provide main Makefile for whole source tree - By design this patch is not needed to be sent upstream. -Forwarded: not-needed -Author: Mike Gabriel <mike.gabriel@das-netzwerkteam.de> -Last-Update: 2011-12-31 ---- /dev/null -+++ b/Makefile -@@ -0,0 +1,51 @@ -+#!/usr/bin/make -f -+ -+PREFIX ?= /usr/local -+CONFIGURE=./configure -+ -+%: -+ if test -f bin/Makefile; then ${MAKE} -C bin $@; fi -+ if test -f nxcomp/Makefile; then ${MAKE} -C nxcomp $@; fi -+ if test -f nxproxy/Makefile; then ${MAKE} -C nxproxy $@; fi -+ if test -d nx-X11; then \ -+ if test -f nxcompext/Makefile; then ${MAKE} -C nxcompext $@; fi; \ -+ if test -f nxcompshad/Makefile; then ${MAKE} -C nxcompshad $@; fi; \ -+ if test -f nx-X11/Makefile; then ${MAKE} -C nx-X11 $@; fi; \ -+ fi -+ -+all: build -+ -+test: -+ echo "No testing for NX (redistributed)" -+ -+build-lite: -+ cd nxcomp && autoconf && (${CONFIGURE}) && ${MAKE} -+ cd nxproxy && autoconf && (${CONFIGURE}) && ${MAKE} -+ -+build-full: -+# in the full case, we rely on "magic" in the nx-X11 imake-based makefiles... -+ cd nxcomp && autoconf -+ cd nxcompext && autoconf -+ cd nxcompshad && autoconf -+ cd nx-X11 && ${MAKE} World -+ cd nxproxy && autoconf && (${CONFIGURE}) && ${MAKE} -+ -+build: -+ if ! test -d nx-X11; then \ -+ ${MAKE} build-lite; \ -+ else \ -+ ${MAKE} build-full; \ -+ fi -+ -+uninstall: -+ if test -f bin/Makefile; then ${MAKE} -C bin $@; fi -+ if test -f nxcomp/Makefile; then ${MAKE} -C nxcomp $@; fi -+ if test -f nxproxy/Makefile; then ${MAKE} -C nxproxy $@; fi -+ if test -d nx-X11; then \ -+ if test -f nxcompext/Makefile; then ${MAKE} -C nxcompext $@; fi; \ -+ if test -f nxcompshad/Makefile; then ${MAKE} -C nxcompshad $@; fi; \ -+ if test -f nx-X11/Makefile; then \ -+ if test -d $(PREFIX)/lib/nx; then rm -rf $(PREFIX)/lib/nx; fi; \ -+ if test -d $(PREFIX)/include/nx; then rm -rf $(PREFIX)/include/nx; fi; \ -+ fi; \ -+ fi ---- /dev/null -+++ b/bin/Makefile -@@ -0,0 +1,31 @@ -+#!/usr/bin/make -f -+ -+INSTALL_DIR=install -d -o root -g root -m 755 -+INSTALL_FILE=install -o root -g root -m 644 -+INSTALL_PROGRAM=install -o root -g root -m 755 -+ -+RM_FILE=rm -f -+RM_DIR=rmdir -p --ignore-fail-on-non-empty -+ -+DESTDIR= -+PREFIX ?= /usr/local -+BINDIR=$(PREFIX)/bin -+NXLIBDIR=$(PREFIX)/lib/nx -+X2GOLIBDIR=$(PREFIX)/lib/x2go -+ -+%: -+ echo "Nothing to do for $@..." -+ -+install: -+ mkdir -p $(DESTDIR)$(X2GOLIBDIR)/bin -+ $(INSTALL_DIR) $(DESTDIR)$(X2GOLIBDIR)/bin/ -+ ln -sf $(NXLIBDIR)/bin/nxagent $(DESTDIR)$(X2GOLIBDIR)/bin/x2goagent -+ mkdir -p $(DESTDIR)$(BINDIR) -+ find nx* | while read file; do $(INSTALL_PROGRAM) $$file $(DESTDIR)$(BINDIR)/; done -+ find x2go* | while read file; do $(INSTALL_PROGRAM) $$file $(DESTDIR)$(BINDIR)/; done -+ -+uninstall: -+ find nx* | while read file; do rm -f $(DESTDIR)$(BINDIR)/$$file; done -+ find x2go* | while read file; do rm -f $(DESTDIR)$(BINDIR)/$$file; done -+ $(RM_FILE) $(DESTDIR)$(X2GOLIBDIR)/bin/x2goagent -+ $(RM_DIR) $(DESTDIR)$(X2GOLIBDIR)/bin/ diff --git a/debian/patches/series b/debian/patches/series index fb63124..573312b 100644 --- a/debian/patches/series +++ b/debian/patches/series @@ -1,5 +1,4 @@ 000_add-NX-redistribution-README.full+lite.patch -001_add-main-makefile.full+lite.patch 002_nxcompshad_build-against-nx-x11-only.full.patch 003_nxcompshad_gcc43.full.patch 004_nx-X11_fix-nxcompshad-build.full.patch diff --git a/debian/rules b/debian/rules index 79ca44f..7114b24 100755 --- a/debian/rules +++ b/debian/rules @@ -23,6 +23,7 @@ override_dh_clean: rm -f nx-X11/programs/Xserver/hw/nxagent/changelog rm -f nx-X11/programs/nxauth/changelog rm -f nxproxy/changelog + rm -f Makefile dh_clean override_dh_auto_build: @@ -34,6 +35,7 @@ override_dh_auto_build: cp -a nx-X11/programs/Xserver/hw/nxagent/CHANGELOG nx-X11/programs/Xserver/hw/nxagent/changelog cp -a nx-X11/programs/nxauth/CHANGELOG nx-X11/programs/nxauth/changelog cp -a nxproxy/CHANGELOG nxproxy/changelog + ln -s debian/Makefile.nx-libs Makefile LD_LIBRARY_PATH=`pwd`/debian/libnx-x11/usr/lib/nx/X11:$$LD_LIBRARY_PATH dh_auto_build --with quilt debian/post-build-nx.sh -- 1.7.10.4

it is automatically generated and clean during the package build --- nxproxy/configure | 5634 ----------------------------------------------------- 1 file changed, 5634 deletions(-) delete mode 100755 nxproxy/configure diff --git a/nxproxy/configure b/nxproxy/configure deleted file mode 100755 index 9d9f08c..0000000 --- a/nxproxy/configure +++ /dev/null @@ -1,5634 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.59. -# -# Copyright (C) 2003 Free Software Foundation, Inc. -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi -DUALCASE=1; export DUALCASE # for MKS sh - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - - -# Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -exec 6>&1 - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_config_libobj_dir=. -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} - -# Maximum number of lines to put in a shell here document. -# This variable seems obsolete. It should probably be removed, and -# only ac_max_sed_lines should be used. -: ${ac_max_here_lines=38} - -# Identity of this package. -PACKAGE_NAME= -PACKAGE_TARNAME= -PACKAGE_VERSION= -PACKAGE_STRING= -PACKAGE_BUGREPORT= - -ac_unique_file="Main.c" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS armcxx armcc CXX CXXFLAGS LDFLAGS CPPFLAGS ac_ct_CXX EXEEXT OBJEXT CC CFLAGS ac_ct_CC INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CXXCPP X_CFLAGS X_PRE_LIBS X_LIBS X_EXTRA_LIBS LIBVERSION VERSION MAKEDEPEND LIBOBJS LTLIBOBJS' -ac_subst_files='' - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -ac_prev= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_option in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval "enable_$ac_feature=no" ;; - - -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "enable_$ac_feature='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package| sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "with_$ac_package='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/-/_/g'` - eval "with_$ac_package=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) { echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` - eval "$ac_envvar='$ac_optarg'" - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } -fi - -# Be sure to have absolute paths. -for ac_var in exec_prefix prefix -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* | NONE | '' ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# Be sure to have absolute paths. -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_confdir=`(dirname "$0") 2>/dev/null || -$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 - { (exit 1); exit 1; }; } - else - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } - fi -fi -(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 - { (exit 1); exit 1; }; } -srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` -ac_env_build_alias_set=${build_alias+set} -ac_env_build_alias_value=$build_alias -ac_cv_env_build_alias_set=${build_alias+set} -ac_cv_env_build_alias_value=$build_alias -ac_env_host_alias_set=${host_alias+set} -ac_env_host_alias_value=$host_alias -ac_cv_env_host_alias_set=${host_alias+set} -ac_cv_env_host_alias_value=$host_alias -ac_env_target_alias_set=${target_alias+set} -ac_env_target_alias_value=$target_alias -ac_cv_env_target_alias_set=${target_alias+set} -ac_cv_env_target_alias_value=$target_alias -ac_env_CXX_set=${CXX+set} -ac_env_CXX_value=$CXX -ac_cv_env_CXX_set=${CXX+set} -ac_cv_env_CXX_value=$CXX -ac_env_CXXFLAGS_set=${CXXFLAGS+set} -ac_env_CXXFLAGS_value=$CXXFLAGS -ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} -ac_cv_env_CXXFLAGS_value=$CXXFLAGS -ac_env_LDFLAGS_set=${LDFLAGS+set} -ac_env_LDFLAGS_value=$LDFLAGS -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -ac_cv_env_LDFLAGS_value=$LDFLAGS -ac_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_env_CPPFLAGS_value=$CPPFLAGS -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_cv_env_CPPFLAGS_value=$CPPFLAGS -ac_env_CC_set=${CC+set} -ac_env_CC_value=$CC -ac_cv_env_CC_set=${CC+set} -ac_cv_env_CC_value=$CC -ac_env_CFLAGS_set=${CFLAGS+set} -ac_env_CFLAGS_value=$CFLAGS -ac_cv_env_CFLAGS_set=${CFLAGS+set} -ac_cv_env_CFLAGS_value=$CFLAGS -ac_env_CXXCPP_set=${CXXCPP+set} -ac_env_CXXCPP_value=$CXXCPP -ac_cv_env_CXXCPP_set=${CXXCPP+set} -ac_cv_env_CXXCPP_value=$CXXCPP - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures this package to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -_ACEOF - - cat <<_ACEOF -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data [PREFIX/share] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --infodir=DIR info documentation [PREFIX/info] - --mandir=DIR man documentation [PREFIX/man] -_ACEOF - - cat <<\_ACEOF - -X features: - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR -_ACEOF -fi - -if test -n "$ac_init_help"; then - - cat <<\_ACEOF - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-x use the X Window System - -Some influential environment variables: - CXX C++ compiler command - CXXFLAGS C++ compiler flags - LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a - nonstandard directory <lib dir> - CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have - headers in a nonstandard directory <include dir> - CC C compiler command - CFLAGS C compiler flags - CXXCPP C++ preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -_ACEOF -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - ac_popdir=`pwd` - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d $ac_dir || continue - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac - - cd $ac_dir - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_srcdir/configure.gnu; then - echo - $SHELL $ac_srcdir/configure.gnu --help=recursive - elif test -f $ac_srcdir/configure; then - echo - $SHELL $ac_srcdir/configure --help=recursive - elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then - echo - $ac_configure --help - else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi - cd $ac_popdir - done -fi - -test -n "$ac_init_help" && exit 0 -if $ac_init_version; then - cat <<\_ACEOF - -Copyright (C) 2003 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit 0 -fi -exec 5>config.log -cat >&5 <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by $as_me, which was -generated by GNU Autoconf 2.59. Invocation command line was - - $ $0 $@ - -_ACEOF -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" -done - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_sep= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; - 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - # Get rid of the leading space. - ac_sep=" " - ;; - esac - done -done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Be sure not to use single quotes in there, as some shells, -# such as our DU 5.0 friend, will then `close' the trap. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - cat <<\_ASBOX -## ---------------- ## -## Cache variables. ## -## ---------------- ## -_ASBOX - echo - # The following way of writing the cache mishandles newlines in values, -{ - (set) 2>&1 | - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in - *ac_space=\ *) - sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" - ;; - *) - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} - echo - - cat <<\_ASBOX -## ----------------- ## -## Output variables. ## -## ----------------- ## -_ASBOX - echo - for ac_var in $ac_subst_vars - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------- ## -## Output files. ## -## ------------- ## -_ASBOX - echo - for ac_var in $ac_subst_files - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - fi - - if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## -## confdefs.h. ## -## ----------- ## -_ASBOX - echo - sed "/^$/d" confdefs.h | sort - echo - fi - test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core && - rm -rf conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status - ' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo >confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; - esac - fi -else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val="\$ac_cv_env_${ac_var}_value" - eval ac_new_val="\$ac_env_${ac_var}_value" - case $ac_old_set,$ac_new_set in - set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - - - - - - - - - - - - - - - - - - -CXXFLAGS="-O3" -CPPFLAGS="-O3" - - -if test -d "../nx-X11/exports/include" ; then - CXXFLAGS="$CXXFLAGS -I../nx-X11/exports/include" - LIBS="$LIBS -L../nx-X11/exports/lib" -fi - - -if test "${with_ipaq}" = yes; then - echo -e "enabling ipaq configuration" - CXX="arm-linux-c++" - CC="arm-linux-gcc" - unset ac_cv_prog_armcxx - unset ac_cv_prog_armcc - unset ac_cv_prog_CXXCPP - # Extract the first word of ""$CXX"", so it can be a program name with args. -set dummy "$CXX"; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_armcxx+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$armcxx"; then - ac_cv_prog_armcxx="$armcxx" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_armcxx="yes" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_armcxx" && ac_cv_prog_armcxx="no" -fi -fi -armcxx=$ac_cv_prog_armcxx -if test -n "$armcxx"; then - echo "$as_me:$LINENO: result: $armcxx" >&5 -echo "${ECHO_T}$armcxx" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - # Extract the first word of ""$CC"", so it can be a program name with args. -set dummy "$CC"; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_armcc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$armcc"; then - ac_cv_prog_armcc="$armcc" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_armcc="yes" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_armcc" && ac_cv_prog_armcc="no" -fi -fi -armcc=$ac_cv_prog_armcc -if test -n "$armcc"; then - echo "$as_me:$LINENO: result: $armcc" >&5 -echo "${ECHO_T}$armcc" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - if test $armcxx = "yes" && test $armcc = "yes" ; then - ac_cv_prog_CXX="$CXX" - ac_cv_prog_CC="$CC" - else - { { echo "$as_me:$LINENO: error: installation or configuration problem: I cannot find compiler for arm-linux" >&5 -echo "$as_me: error: installation or configuration problem: I cannot find compiler for arm-linux" >&2;} - { (exit 1); exit 1; }; } - fi -else - unset ac_cv_prog_CXX - unset ac_cv_prog_CC - unset ac_cv_prog_CXXCPP -fi - - -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -if test -n "$ac_tool_prefix"; then - for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CXX+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CXX"; then - ac_cv_prog_CXX="$CXX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CXX=$ac_cv_prog_CXX -if test -n "$CXX"; then - echo "$as_me:$LINENO: result: $CXX" >&5 -echo "${ECHO_T}$CXX" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$CXX" && break - done -fi -if test -z "$CXX"; then - ac_ct_CXX=$CXX - for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CXX"; then - ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CXX="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CXX=$ac_cv_prog_ac_ct_CXX -if test -n "$ac_ct_CXX"; then - echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 -echo "${ECHO_T}$ac_ct_CXX" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$ac_ct_CXX" && break -done -test -n "$ac_ct_CXX" || ac_ct_CXX="g++" - - CXX=$ac_ct_CXX -fi - - -# Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C++ compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 - (eval $ac_compiler --version </dev/null >&5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 - (eval $ac_compiler -v </dev/null >&5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 - (eval $ac_compiler -V </dev/null >&5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -echo "$as_me:$LINENO: checking for C++ compiler default output file name" >&5 -echo $ECHO_N "checking for C++ compiler default output file name... $ECHO_C" >&6 -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 - (eval $ac_link_default) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Find the output, starting from the most likely. This scheme is -# not robust to junk in `.', hence go to wildcards (a.*) only as a last -# resort. - -# Be careful to initialize this variable, since it used to be cached. -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. -ac_cv_exeext= -# b.out is created by i960 compilers. -for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) - ;; - conftest.$ac_ext ) - # This is the source file. - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool, - # but it would be cool to find out if it's true. Does anybody - # maintain Libtool? --akim. - export ac_cv_exeext - break;; - * ) - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: C++ compiler cannot create executables -See \`config.log' for more details." >&5 -echo "$as_me: error: C++ compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; } -fi - -ac_exeext=$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6 - -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether the C++ compiler works" >&5 -echo $ECHO_N "checking whether the C++ compiler works... $ECHO_C" >&6 -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { echo "$as_me:$LINENO: error: cannot run C++ compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run C++ compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - -rm -f a.out a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6 - -echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext - break;; - * ) break;; - esac -done -else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6 - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 -if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6 -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6 -if test "${ac_cv_cxx_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_compiler_gnu=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_cxx_compiler_gnu=$ac_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6 -GXX=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CXXFLAGS=${CXXFLAGS+set} -ac_save_CXXFLAGS=$CXXFLAGS -CXXFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 -echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cxx_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cxx_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_prog_cxx_g=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6 -if test "$ac_test_CXXFLAGS" = set; then - CXXFLAGS=$ac_save_CXXFLAGS -elif test $ac_cv_prog_cxx_g = yes; then - if test "$GXX" = yes; then - CXXFLAGS="-g -O2" - else - CXXFLAGS="-g" - fi -else - if test "$GXX" = yes; then - CXXFLAGS="-O2" - else - CXXFLAGS= - fi -fi -for ac_declaration in \ - '' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -#include <stdlib.h> -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -continue -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$ac_ct_CC" && break -done - - CC=$ac_ct_CC -fi - -fi - - -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - -# Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 - (eval $ac_compiler --version </dev/null >&5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 - (eval $ac_compiler -v </dev/null >&5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 - (eval $ac_compiler -V </dev/null >&5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_compiler_gnu=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -GCC=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_prog_cc_g=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_prog_cc_stdc=no -ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <stdarg.h> -#include <stdio.h> -#include <sys/types.h> -#include <sys/stat.h> -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std1 is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std1. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX 10.20 and later -Ae -# HP-UX older versions -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg -break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext -done -rm -f conftest.$ac_ext conftest.$ac_objext -CC=$ac_save_CC - -fi - -case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6 ;; - *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; -esac - -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. -cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - '' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -#include <stdlib.h> -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -continue -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h -fi - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - - -ac_aux_dir= -for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f $ac_dir/shtool; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 -echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} - { (exit 1); exit 1; }; } -fi -ac_config_guess="$SHELL $ac_aux_dir/config.guess" -ac_config_sub="$SHELL $ac_aux_dir/config.sub" -ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 -if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - done - done - ;; -esac -done - - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL=$ac_install_sh - fi -fi -echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6 - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - - - - -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 -echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 -if test -z "$CXXCPP"; then - if test "${ac_cv_prog_CXXCPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CXXCPP needs to be expanded - for CXXCPP in "$CXX -E" "/lib/cpp" - do - ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CXXCPP=$CXXCPP - -fi - CXXCPP=$ac_cv_prog_CXXCPP -else - ac_cv_prog_CXXCPP=$CXXCPP -fi -echo "$as_me:$LINENO: result: $CXXCPP" >&5 -echo "${ECHO_T}$CXXCPP" >&6 -ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - -echo "$as_me:$LINENO: checking for X" >&5 -echo $ECHO_N "checking for X... $ECHO_C" >&6 - - -# Check whether --with-x or --without-x was given. -if test "${with_x+set}" = set; then - withval="$with_x" - -fi; -# $have_x is `yes', `no', `disabled', or empty when we do not yet know. -if test "x$with_x" = xno; then - # The user explicitly disabled X. - have_x=disabled -else - if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then - # Both variables are already set. - have_x=yes - else - if test "${ac_cv_have_x+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # One or both of the vars are not set, and there is no cached value. -ac_x_includes=no ac_x_libraries=no -rm -fr conftest.dir -if mkdir conftest.dir; then - cd conftest.dir - # Make sure to not put "make" in the Imakefile rules, since we grep it out. - cat >Imakefile <<'_ACEOF' -acfindx: - @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' -_ACEOF - if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then - # GNU make sometimes prints "make[1]: Entering...", which would confuse us. - eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` - # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. - for ac_extension in a so sl; do - if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && - test -f $ac_im_libdir/libX11.$ac_extension; then - ac_im_usrlibdir=$ac_im_libdir; break - fi - done - # Screen out bogus values from the imake configuration. They are - # bogus both because they are the default anyway, and because - # using them would break gcc on systems where it needs fixed includes. - case $ac_im_incroot in - /usr/include) ;; - *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; - esac - case $ac_im_usrlibdir in - /usr/lib | /lib) ;; - *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; - esac - fi - cd .. - rm -fr conftest.dir -fi - -# Standard set of common directories for X headers. -# Check X11 before X11Rn because it is often a symlink to the current release. -ac_x_header_dirs=' -/usr/X11/include -/usr/X11R6/include -/usr/X11R5/include -/usr/X11R4/include - -/usr/include/X11 -/usr/include/X11R6 -/usr/include/X11R5 -/usr/include/X11R4 - -/usr/local/X11/include -/usr/local/X11R6/include -/usr/local/X11R5/include -/usr/local/X11R4/include - -/usr/local/include/X11 -/usr/local/include/X11R6 -/usr/local/include/X11R5 -/usr/local/include/X11R4 - -/usr/X386/include -/usr/x386/include -/usr/XFree86/include/X11 - -/usr/include -/usr/local/include -/usr/unsupported/include -/usr/athena/include -/usr/local/x11r5/include -/usr/lpp/Xamples/include - -/usr/openwin/include -/usr/openwin/share/include' - -if test "$ac_x_includes" = no; then - # Guess where to find include files, by looking for Intrinsic.h. - # First, try using that file with no special directory specified. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <X11/Intrinsic.h> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # We can compile using X headers with no special include directory. -ac_x_includes= -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - for ac_dir in $ac_x_header_dirs; do - if test -r "$ac_dir/X11/Intrinsic.h"; then - ac_x_includes=$ac_dir - break - fi -done -fi -rm -f conftest.err conftest.$ac_ext -fi # $ac_x_includes = no - -if test "$ac_x_libraries" = no; then - # Check for the libraries. - # See if we find them without any special options. - # Don't add to $LIBS permanently. - ac_save_LIBS=$LIBS - LIBS="-lXt $LIBS" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <X11/Intrinsic.h> -int -main () -{ -XtMalloc (0) - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - LIBS=$ac_save_LIBS -# We can link X programs with no special library path. -ac_x_libraries= -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -LIBS=$ac_save_LIBS -for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` -do - # Don't even attempt the hair of trying to link an X program! - for ac_extension in a so sl; do - if test -r $ac_dir/libXt.$ac_extension; then - ac_x_libraries=$ac_dir - break 2 - fi - done -done -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi # $ac_x_libraries = no - -if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then - # Didn't find X anywhere. Cache the known absence of X. - ac_cv_have_x="have_x=no" -else - # Record where we found X for the cache. - ac_cv_have_x="have_x=yes \ - ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" -fi -fi - - fi - eval "$ac_cv_have_x" -fi # $with_x != no - -if test "$have_x" != yes; then - echo "$as_me:$LINENO: result: $have_x" >&5 -echo "${ECHO_T}$have_x" >&6 - no_x=yes -else - # If each of the values was on the command line, it overrides each guess. - test "x$x_includes" = xNONE && x_includes=$ac_x_includes - test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries - # Update the cache value to reflect the command line values. - ac_cv_have_x="have_x=yes \ - ac_x_includes=$x_includes ac_x_libraries=$x_libraries" - echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 -echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6 -fi - -if test "$no_x" = yes; then - # Not all programs may use this symbol, but it does not hurt to define it. - -cat >>confdefs.h <<\_ACEOF -#define X_DISPLAY_MISSING 1 -_ACEOF - - X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= -else - if test -n "$x_includes"; then - X_CFLAGS="$X_CFLAGS -I$x_includes" - fi - - # It would also be nice to do this for all -L options, not just this one. - if test -n "$x_libraries"; then - X_LIBS="$X_LIBS -L$x_libraries" - # For Solaris; some versions of Sun CC require a space after -R and - # others require no space. Words are not sufficient . . . . - case `(uname -sr) 2>/dev/null` in - "SunOS 5"*) - echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 -echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6 - ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_R_nospace=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_R_nospace=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test $ac_R_nospace = yes; then - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - X_LIBS="$X_LIBS -R$x_libraries" - else - LIBS="$ac_xsave_LIBS -R $x_libraries" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_R_space=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_R_space=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test $ac_R_space = yes; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - X_LIBS="$X_LIBS -R $x_libraries" - else - echo "$as_me:$LINENO: result: neither works" >&5 -echo "${ECHO_T}neither works" >&6 - fi - fi - LIBS=$ac_xsave_LIBS - esac - fi - - # Check for system-dependent libraries X programs must link with. - # Do this before checking for the system-independent R6 libraries - # (-lICE), since we may need -lsocket or whatever for X linking. - - if test "$ISC" = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" - else - # Martyn Johnson says this is needed for Ultrix, if the X - # libraries were built with DECnet support. And Karl Berry says - # the Alpha needs dnet_stub (dnet does not exist). - ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char XOpenDisplay (); -int -main () -{ -XOpenDisplay (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 -echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6 -if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldnet $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dnet_ntoa (); -int -main () -{ -dnet_ntoa (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dnet_dnet_ntoa=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dnet_dnet_ntoa=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 -echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6 -if test $ac_cv_lib_dnet_dnet_ntoa = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" -fi - - if test $ac_cv_lib_dnet_dnet_ntoa = no; then - echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 -echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6 -if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldnet_stub $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dnet_ntoa (); -int -main () -{ -dnet_ntoa (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dnet_stub_dnet_ntoa=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dnet_stub_dnet_ntoa=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 -echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6 -if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" -fi - - fi -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$ac_xsave_LIBS" - - # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, - # to get the SysV transport functions. - # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4) - # needs -lnsl. - # The nsl library prevents programs from opening the X display - # on Irix 5.2, according to T.E. Dickey. - # The functions gethostbyname, getservbyname, and inet_addr are - # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. - echo "$as_me:$LINENO: checking for gethostbyname" >&5 -echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6 -if test "${ac_cv_func_gethostbyname+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define gethostbyname to an innocuous variant, in case <limits.h> declares gethostbyname. - For example, HP-UX 11i <limits.h> declares gettimeofday. */ -#define gethostbyname innocuous_gethostbyname - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char gethostbyname (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - -#undef gethostbyname - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char gethostbyname (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) -choke me -#else -char (*f) () = gethostbyname; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != gethostbyname; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_gethostbyname=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_gethostbyname=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 -echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6 - - if test $ac_cv_func_gethostbyname = no; then - echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 -echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6 -if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lnsl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char gethostbyname (); -int -main () -{ -gethostbyname (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_nsl_gethostbyname=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_nsl_gethostbyname=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 -echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6 -if test $ac_cv_lib_nsl_gethostbyname = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" -fi - - if test $ac_cv_lib_nsl_gethostbyname = no; then - echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 -echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6 -if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lbsd $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char gethostbyname (); -int -main () -{ -gethostbyname (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_bsd_gethostbyname=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_bsd_gethostbyname=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 -echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6 -if test $ac_cv_lib_bsd_gethostbyname = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" -fi - - fi - fi - - # lieder@skyler.mavd.honeywell.com says without -lsocket, - # socket/setsockopt and other routines are undefined under SCO ODT - # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary - # on later versions), says Simon Leinen: it contains gethostby* - # variants that don't use the name server (or something). -lsocket - # must be given before -lnsl if both are needed. We assume that - # if connect needs -lnsl, so does gethostbyname. - echo "$as_me:$LINENO: checking for connect" >&5 -echo $ECHO_N "checking for connect... $ECHO_C" >&6 -if test "${ac_cv_func_connect+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define connect to an innocuous variant, in case <limits.h> declares connect. - For example, HP-UX 11i <limits.h> declares gettimeofday. */ -#define connect innocuous_connect - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char connect (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - -#undef connect - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char connect (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_connect) || defined (__stub___connect) -choke me -#else -char (*f) () = connect; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != connect; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_connect=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_connect=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 -echo "${ECHO_T}$ac_cv_func_connect" >&6 - - if test $ac_cv_func_connect = no; then - echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 -echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6 -if test "${ac_cv_lib_socket_connect+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsocket $X_EXTRA_LIBS $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char connect (); -int -main () -{ -connect (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_socket_connect=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_socket_connect=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 -echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6 -if test $ac_cv_lib_socket_connect = yes; then - X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" -fi - - fi - - # Guillermo Gomez says -lposix is necessary on A/UX. - echo "$as_me:$LINENO: checking for remove" >&5 -echo $ECHO_N "checking for remove... $ECHO_C" >&6 -if test "${ac_cv_func_remove+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define remove to an innocuous variant, in case <limits.h> declares remove. - For example, HP-UX 11i <limits.h> declares gettimeofday. */ -#define remove innocuous_remove - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char remove (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - -#undef remove - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char remove (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_remove) || defined (__stub___remove) -choke me -#else -char (*f) () = remove; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != remove; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_remove=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_remove=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 -echo "${ECHO_T}$ac_cv_func_remove" >&6 - - if test $ac_cv_func_remove = no; then - echo "$as_me:$LINENO: checking for remove in -lposix" >&5 -echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6 -if test "${ac_cv_lib_posix_remove+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lposix $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char remove (); -int -main () -{ -remove (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_posix_remove=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_posix_remove=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 -echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6 -if test $ac_cv_lib_posix_remove = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" -fi - - fi - - # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. - echo "$as_me:$LINENO: checking for shmat" >&5 -echo $ECHO_N "checking for shmat... $ECHO_C" >&6 -if test "${ac_cv_func_shmat+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define shmat to an innocuous variant, in case <limits.h> declares shmat. - For example, HP-UX 11i <limits.h> declares gettimeofday. */ -#define shmat innocuous_shmat - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shmat (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - -#undef shmat - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shmat (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shmat) || defined (__stub___shmat) -choke me -#else -char (*f) () = shmat; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != shmat; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_shmat=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_shmat=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 -echo "${ECHO_T}$ac_cv_func_shmat" >&6 - - if test $ac_cv_func_shmat = no; then - echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 -echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6 -if test "${ac_cv_lib_ipc_shmat+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lipc $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shmat (); -int -main () -{ -shmat (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_ipc_shmat=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_ipc_shmat=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 -echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6 -if test $ac_cv_lib_ipc_shmat = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" -fi - - fi - fi - - # Check for libraries that X11R6 Xt/Xaw programs need. - ac_save_LDFLAGS=$LDFLAGS - test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" - # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to - # check for ICE first), but we must link in the order -lSM -lICE or - # we get undefined symbols. So assume we have SM if we have ICE. - # These have to be linked with before -lX11, unlike the other - # libraries we check for below, so use a different variable. - # John Interrante, Karl Berry - echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 -echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6 -if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lICE $X_EXTRA_LIBS $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char IceConnectionNumber (); -int -main () -{ -IceConnectionNumber (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_ICE_IceConnectionNumber=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_ICE_IceConnectionNumber=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 -echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6 -if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then - X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" -fi - - LDFLAGS=$ac_save_LDFLAGS - -fi - - - -ac_help="$ac_help - --with-symbols give -g flag to compiler to produce debug symbols - --with-info define INFO at compile time to get basic log output - --with-valgrind clean up allocated buffers to avoid valgrind warnings - --with-version use this version for produced libraries" - - - - -echo "$as_me:$LINENO: checking for FreeBSD environment" >&5 -echo $ECHO_N "checking for FreeBSD environment... $ECHO_C" >&6 -if test "${nxconf_cv_freebsd+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -return __FreeBSD__; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - nxconf_cv_freebsd=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -nxconf_cv_freebsd=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -rm -f conftest* -fi -echo "$as_me:$LINENO: result: $nxconf_cv_freebsd" >&5 -echo "${ECHO_T}$nxconf_cv_freebsd" >&6 -FreeBSD= -test "$nxconf_cv_freebsd" = yes && FreeBSD=yes - - - -echo "$as_me:$LINENO: checking for Cygwin32 environment" >&5 -echo $ECHO_N "checking for Cygwin32 environment... $ECHO_C" >&6 -if test "${nxconf_cv_cygwin32+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -return __CYGWIN32__; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - nxconf_cv_cygwin32=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -nxconf_cv_cygwin32=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -rm -f conftest* -fi -echo "$as_me:$LINENO: result: $nxconf_cv_cygwin32" >&5 -echo "${ECHO_T}$nxconf_cv_cygwin32" >&6 -CYGWIN32= -test "$nxconf_cv_cygwin32" = yes && CYGWIN32=yes - - - -echo "$as_me:$LINENO: checking for Darwin environment" >&5 -echo $ECHO_N "checking for Darwin environment... $ECHO_C" >&6 -if test "${nxconf_cv_darwin+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -return __APPLE__; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - nxconf_cv_darwin=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -nxconf_cv_darwin=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -rm -f conftest* -fi -echo "$as_me:$LINENO: result: $nxconf_cv_darwin" >&5 -echo "${ECHO_T}$nxconf_cv_darwin" >&6 -DARWIN= -test "$nxconf_cv_darwin" = yes && DARWIN=yes - - - -echo "$as_me:$LINENO: checking for SunOS environment" >&5 -echo $ECHO_N "checking for SunOS environment... $ECHO_C" >&6 -if test "${nxconf_cv_sun+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -return __sun; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - nxconf_cv_sun=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -nxconf_cv_sun=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -rm -f conftest* -fi -echo "$as_me:$LINENO: result: $nxconf_cv_sun" >&5 -echo "${ECHO_T}$nxconf_cv_sun" >&6 -SUN= -test "$nxconf_cv_sun" = yes && SUN=yes - - - - -if test "${with_version}" = yes; then - VERSION=${ac_option} -else - VERSION=`cat VERSION` -fi -echo -e "compiling version ${VERSION}" - -LIBVERSION=`echo ${VERSION} | cut -d '.' -f 1` - -CXXFLAGS="$CXXFLAGS -DVERSION=\\\"${VERSION}\\\"" -CPPFLAGS="$CPPFLAGS -DVERSION=\\\"${VERSION}\\\"" - - -if test "${with_symbols}" = yes; then - echo -e "enabling production of debug symbols" - CXXFLAGS="-g $CXXFLAGS" - CPPFLAGS="-g $CPPFLAGS" -else - echo -e "disabling production of debug symbols" -fi - - -if test "${with_info}" = yes; then - echo -e "enabling info output in the log file" - CXXFLAGS="$CXXFLAGS -DINFO" - CPPFLAGS="$CPPFLAGS -DINFO" -else - echo -e "disabling info output in the log file" -fi - - -if test "${with_valgrind}" = yes; then - echo -e "enabling valgrind memory checker workarounds" - CXXFLAGS="$CXXFLAGS -DVALGRIND" - CPPFLAGS="$CPPFLAGS -DVALGRIND" -else - echo -e "disabling valgrind memory checker workarounds" -fi - - -if test "$CYGWIN32" = yes; then - LIBS="$LIBS -L../nxcomp -lXcomp -lstdc++ -Wl,-e,_mainCRTStartup -ljpeg -lpng -lz" -else - LIBS="$LIBS -L../nxcomp -lXcomp" -fi - - - - -if test -x "../nx-X11/config/makedepend/makedepend" ; then - MAKEDEPEND=../nx-X11/config/makedepend/makedepend -else - if test -x "/usr/X11R6/bin/makedepend" ; then - MAKEDEPEND=/usr/X11R6/bin/makedepend - else - if test -x "/usr/openwin/bin/makedepend" ; then - MAKEDEPEND=/usr/openwin/bin/makedepend - else - MAKEDEPEND=makedepend - fi - fi -fi - - ac_config_files="$ac_config_files Makefile" -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -{ - (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} | - sed ' - t clear - : clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" - cat confcache >$cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/; -s/:*\${srcdir}:*/:/; -s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; -s/:*$//; -s/^[^=]*=[ ]*$//; -}' -fi - -# Transform confdefs.h into DEFS. -# Protect against shell expansion while executing Makefile rules. -# Protect against Makefile macro expansion. -# -# If the first sed substitution is executed (which looks for macros that -# take arguments), then we branch to the quote section. Otherwise, -# look for a macro that doesn't take arguments. -cat >confdef2opt.sed <<\_ACEOF -t clear -: clear -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g -t quote -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g -t quote -d -: quote -s,[ `~#$^&*(){}\\|;'"<>?],\\&,g -s,\[,\\&,g -s,\],\\&,g -s,\$,$$,g -p -_ACEOF -# We use echo to avoid assuming a particular line-breaking character. -# The extra dot is to prevent the shell from consuming trailing -# line-breaks from the sub-command output. A line-break within -# single-quotes doesn't work because, if this script is created in a -# platform that uses two characters for line-breaks (e.g., DOS), tr -# would break. -ac_LF_and_DOT=`echo; echo .` -DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` -rm -f confdef2opt.sed - - -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_i=`echo "$ac_i" | - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - -: ${CONFIG_STATUS=./config.status} -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi -DUALCASE=1; export DUALCASE # for MKS sh - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - -exec 6>&1 - -# Open the log real soon, to keep \$[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. Logging --version etc. is OK. -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX -} >&5 -cat >&5 <<_CSEOF - -This file was extended by $as_me, which was -generated by GNU Autoconf 2.59. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -_CSEOF -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 -echo >&5 -_ACEOF - -# Files that config.status was made for. -if test -n "$ac_config_files"; then - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_headers"; then - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_links"; then - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_commands"; then - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS -fi - -cat >>$CONFIG_STATUS <<\_ACEOF - -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. - -Usage: $0 [OPTIONS] [FILE]... - - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - -Configuration files: -$config_files - -Report bugs to <bug-autoconf@gnu.org>." -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF -ac_cs_version="\\ -config.status -configured by $0, generated by GNU Autoconf 2.59, - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" - -Copyright (C) 2003 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." -srcdir=$srcdir -INSTALL="$INSTALL" -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "x$1" : 'x\([^=]*\)='` - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` - ac_shift=: - ;; - -*) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - *) # This is not an option, so the user has probably given explicit - # arguments. - ac_option=$1 - ac_need_defaults=false;; - esac - - case $ac_option in - # Handling of the options. -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --vers* | -V ) - echo "$ac_cs_version"; exit 0 ;; - --he | --h) - # Conflict between --help and --header - { { echo "$as_me:$LINENO: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" - ac_need_defaults=false;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; } ;; - - *) ac_config_targets="$ac_config_targets $1" ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -if \$ac_cs_recheck; then - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -fi - -_ACEOF - - - - - -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_config_target in $ac_config_targets -do - case "$ac_config_target" in - # Handling of arguments. - "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason to put it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Create a temporary directory, and hook for its removal unless debugging. -$debug || -{ - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} - -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./confstat$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} - -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF - -# -# CONFIG_FILES section. -# - -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "\$CONFIG_FILES"; then - # Protect against being on the right side of a sed subst in config.status. - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF -s,@SHELL@,$SHELL,;t t -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t -s,@exec_prefix@,$exec_prefix,;t t -s,@prefix@,$prefix,;t t -s,@program_transform_name@,$program_transform_name,;t t -s,@bindir@,$bindir,;t t -s,@sbindir@,$sbindir,;t t -s,@libexecdir@,$libexecdir,;t t -s,@datadir@,$datadir,;t t -s,@sysconfdir@,$sysconfdir,;t t -s,@sharedstatedir@,$sharedstatedir,;t t -s,@localstatedir@,$localstatedir,;t t -s,@libdir@,$libdir,;t t -s,@includedir@,$includedir,;t t -s,@oldincludedir@,$oldincludedir,;t t -s,@infodir@,$infodir,;t t -s,@mandir@,$mandir,;t t -s,@build_alias@,$build_alias,;t t -s,@host_alias@,$host_alias,;t t -s,@target_alias@,$target_alias,;t t -s,@DEFS@,$DEFS,;t t -s,@ECHO_C@,$ECHO_C,;t t -s,@ECHO_N@,$ECHO_N,;t t -s,@ECHO_T@,$ECHO_T,;t t -s,@LIBS@,$LIBS,;t t -s,@armcxx@,$armcxx,;t t -s,@armcc@,$armcc,;t t -s,@CXX@,$CXX,;t t -s,@CXXFLAGS@,$CXXFLAGS,;t t -s,@LDFLAGS@,$LDFLAGS,;t t -s,@CPPFLAGS@,$CPPFLAGS,;t t -s,@ac_ct_CXX@,$ac_ct_CXX,;t t -s,@EXEEXT@,$EXEEXT,;t t -s,@OBJEXT@,$OBJEXT,;t t -s,@CC@,$CC,;t t -s,@CFLAGS@,$CFLAGS,;t t -s,@ac_ct_CC@,$ac_ct_CC,;t t -s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t -s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t -s,@INSTALL_DATA@,$INSTALL_DATA,;t t -s,@CXXCPP@,$CXXCPP,;t t -s,@X_CFLAGS@,$X_CFLAGS,;t t -s,@X_PRE_LIBS@,$X_PRE_LIBS,;t t -s,@X_LIBS@,$X_LIBS,;t t -s,@X_EXTRA_LIBS@,$X_EXTRA_LIBS,;t t -s,@LIBVERSION@,$LIBVERSION,;t t -s,@VERSION@,$VERSION,;t t -s,@MAKEDEPEND@,$MAKEDEPEND,;t t -s,@LIBOBJS@,$LIBOBJS,;t t -s,@LTLIBOBJS@,$LTLIBOBJS,;t t -CEOF - -_ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF - # Split the substitutions into bite-sized pieces for seds with - # small command number limits, like on Digital OSF/1 and HP-UX. - ac_max_sed_lines=48 - ac_sed_frag=1 # Number of current file. - ac_beg=1 # First line for current file. - ac_end=$ac_max_sed_lines # Line after last line for current file. - ac_more_lines=: - ac_sed_cmds= - while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - else - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - fi - if test ! -s $tmp/subs.frag; then - ac_more_lines=false - else - # The purpose of the label and of the branching condition is to - # speed up the sed processing (if there are no `@' at all, there - # is no need to browse any of the substitutions). - # These are the two extra sed commands mentioned above. - (echo ':t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" - else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" - fi - ac_sed_frag=`expr $ac_sed_frag + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_lines` - fi - done - if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat - fi -fi # test -n "$CONFIG_FILES" - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac - - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. - ac_dir=`(dirname "$ac_file") 2>/dev/null || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac - - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_builddir$INSTALL ;; - esac - - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - configure_input= - else - configure_input="$ac_file. " - fi - configure_input=$configure_input"Generated from `echo $ac_file_in | - sed 's,.*/,,'` by configure." - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo "$f";; - *) # Relative - if test -f "$f"; then - # Build tree - echo "$f" - elif test -f "$srcdir/$f"; then - # Source tree - echo "$srcdir/$f" - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@configure_input@,$configure_input,;t t -s,@srcdir@,$ac_srcdir,;t t -s,@abs_srcdir@,$ac_abs_srcdir,;t t -s,@top_srcdir@,$ac_top_srcdir,;t t -s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t -s,@builddir@,$ac_builddir,;t t -s,@abs_builddir@,$ac_abs_builddir,;t t -s,@top_builddir@,$ac_top_builddir,;t t -s,@abs_top_builddir@,$ac_abs_top_builddir,;t t -s,@INSTALL@,$ac_INSTALL,;t t -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out - rm -f $tmp/stdin - if test x"$ac_file" != x-; then - mv $tmp/out $ac_file - else - cat $tmp/out - rm -f $tmp/out - fi - -done -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF - -{ (exit 0); exit 0; } -_ACEOF -chmod +x $CONFIG_STATUS -ac_clean_files=$ac_clean_files_save - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } -fi - -- 1.7.10.4