- x2go-dev - X2Go ListServ

Unshare local media
by John A. Sullivan III 05 Feb '10

05 Feb '10

Hello, all. We have local media sharing working very well. However, is there a way to unshare local files once shared? There does not appear to be a unshare option in the file sharing dialog. We have tried going to session preferences and deleting the share but that does not seem to take effect until the next session. Thanks - John

1 0

x2goprint and user rights
by jasper van der marel 05 Feb '10

05 Feb '10

Hi, I have just configured our first x2go server with thanks to the developers of x2go for solving some problems. I have just one issue with x2goprint. When printing as al local user everything works out of the box. When printing als a ldap-user the job prints but is not send to the client. The server is an Ubuntu server (9.0.4) and the user is member of x2gousers and fuse, just as mentioned in the docs. Can someone look into this (last) problem ? Many thanks in advance, Jasper van der Marel Stone-IT

2 5

X2go server and hostname
by jasper van der marel 05 Feb '10

05 Feb '10

Hi, When resuming or killing a session with the x2go client the client does this based on hostname of the server (eq x2goserver). When connecting through a vpn tunnel the hostname cannot be resolved. Can this be changed to a ip-based setup ? With kind regards, Jasper van der Marel Stone-IT

2 1

Reconnect to suspended session
by olivier.arnaud＠trialys.fr 05 Feb '10

05 Feb '10

Hello, I was previously using Freenx and was able to: 1. automatically reconnect to a suspended session (maximum one concurrent session per user) 2. automatically disconnect a session from a terminal when reconnecting from a new one. and having recently installed x2go on Ubuntu 9.10 I don't get the same results ( a new session is created each time). Is there some configuration to do (some equivalent of node.conf)? Thanks Olivier ARNAUD

2 1

smartcard without pin
by Falk Hanus 05 Feb '10

05 Feb '10

Hello, i'd like to configure my x2goclient to use it with smartcards but without to enter the pin for it. I know the option to put the pins for cards to the GnuPG-Home-Directory. Where is that and what information and format are used? thank you, Falk

2 1

bash settings missing
by John A. Sullivan III 04 Feb '10

04 Feb '10

Hello, all. Amidst our very successful testing of X2Go, we came across a permissions issue. Our environment sets a default umask of 007 rather than the standard 022. This was honored in our NoMachine environment. However, we recently started having access control issues where users could not edit each others' documents. Sure enough, the default rights were rw_r__r__ rather than rw_rw____. We checked our /etc/profile file in case something had changed and it is still a umask of 007. We did a direct ssh and touched a file and it gave correct rw_rw____ rights so it appears to be something specific to X2Go. From where does X2Go configure its bash environment? We are using Hardy on the X2Go server (in process of transitioning to Lenny) and Lenny on the X2Go Client. Thanks - John

3 6

Font mangling in X2Go
by John A. Sullivan III 03 Feb '10

03 Feb '10

Hello, all. We recently changed our set up from NoMachine to X2Go. Lots of good improvements, e.g., sound and device sharing. However, the system fonts are all minuscule - very hard to read. We did set system fonts to 96 dpi in the client. This made no difference. Looking at x2gostartagent, it appears this setting is not used. If anyone knows what calls x2gostartagent, I'll see if we can come up with a patch. A quick grepping around /usr/bin, /usr/sbin, and /usr/lib64/x2go didn't reveal it. We found https://lists.berlios.de/pipermail/x2go-dev/2009-August/000082.html most helpful and, if we do manually edit x2gostartagent, it does work but we were hoping to avoid that. However, we are not seeing the results we expect by trying other methods. I suspect part of the problem is that we are not directly connected to the monitor so DDC is not detecting the monitor's resolution. With no data upon which to make a decision, X appears to default to 75x75. Thus, we thought we would set it in xorg.conf so that we'd have some consistency between the wildly varying resolutions our clients might encounter as they move from desk to desk. However, the setting seem to have no effect. This is our standard device section: Section "Device" Identifier "Configured Video Device" Driver "dummy" Option "UseEDID" "FALSE" Option "USEdidDPI" "false" Option "DPI" "96 x 96" EndSection I would think we'd need only the DPI option with the dummy driver. We also tried editing /etc/X11/Xresources/x11-common by adding Xft.dpi: 96.0. This did not work. We then created a ~/.Xresources file with the same setting. That had an interesting effect. It did not affect the desktop icon labels in KDE but the font in Konsole was now correct. However, when we did xdpyinfo | grep resolution in Konsole, it still thought it was 75x75! Is there anyway to get consistent and usable font sizes without manually editing x2gostartagent? Thanks - John

1 0

how to config logging
by Fazzina, Angelo 02 Feb '10

02 Feb '10

Hello, I just installed on Debian Lenny and I am trying to get X2go client 3.01-2 in Win XP Pro To work and can't find any way to debug it. No logs on server or client seem to be configured ? Any advice would be great. Thanx -ALF Failure Is Not An Option (unless the power goes out)

1 0

Fwd: X2GO Black screen
by jasper van der marel 28 Jan '10

28 Jan '10

Dear Heinz, We are trying to setup a X2Go server in a kerberos/ldap environment. I have mailed earlier we did have some problems with homedirs on a samba/cifs share. Now we are testing with local homedirs for the time being. When I log in as a local user (local homedir,not in ldap and no kerberos ticket) I get a GNOME desktop When I log in as a ldap user (local homedir,user in ldap and kerberos ticket) I get a black X2GO Window . It looks like X2GO will not forward X sessions to the client. Could you (or anybody else) please help me to get the environment working ? Many thanks in advance, Jasper van der Marel Stone-IT

2 1

Re: [X2go-dev] x2go en homedirs on samba share
by Heinz-M. Graesing 27 Jan '10

27 Jan '10

> -----Ursprüngliche Nachricht----- > Von: "jasper van der marel" <jaspervandermarel(a)gmail.com> > Gesendet: 26.01.10 16:08:40 > An: x2go-dev(a)lists.berlios.de > Betreff: [X2go-dev] x2go en homedirs on samba share Hello Jasper, > We want to integrate a x2go server with homedirs on a samba server. > We have a working pam-script which mounts the homedir on login. > X2GO starts and a .x2go is being created. However only a black screen appears > and nothing happens. When looking in the logging file sometimes an > error appears saying > "no screens found". Please try to start something other than a whole desktop environment - for example xclock. This may help to find the problem. > > Has someone in this forum experiences with homedirs on samba shares and x2go ? > I never have had a smb/cifs share as linux /home tree. best regards, Heinz ______________________________________________________ GRATIS für alle WEB.DE-Nutzer: Die maxdome Movie-FLAT! Jetzt freischalten unter http://movieflat.web.de

3 2

x2go en homedirs on samba share
by jasper van der marel 26 Jan '10

26 Jan '10

Hi, We want to integrate a x2go server with homedirs on a samba server. We have a working pam-script which mounts the homedir on login. X2GO starts and a .x2go is being created. However only a black screen appears and nothing happens. When looking in the logging file sometimes an error appears saying "no screens found". Has someone in this forum experiences with homedirs on samba shares and x2go ? Thanks in advance, Jasper van der Marel

1 0

Clean up sessions
by jasper van der marel 25 Jan '10

25 Jan '10

Hi, How can I clean up sessions in x2go-home (sqlite backend) : I misconfigured my terminalserver and now I have some sessions like : tail: kan `/x2goadmin/.x2go/C-x2goadmin-50-1264426896_stDGNOME_dp32/session.log' niet openen om te lezen: Bestand of map bestaat niet 7578|x2goadmin-50-1264426896_stDGNOME_dp32|50|azn-svap212|R|25.01.10 14:41:36|9c7be4a6f1955a0801b628e886b50665|10.181.0.6|30001|30002|25.01.10 14:41:36|x2goadmin|1073|30003 In english it says : cannot open session.log. File does not exists. How can I remove these sessions so they don't show anymore in x2golistsessions and the client ? Must I remove those in sqlite ? With kind regards, Jasper van der Marel Stone-IT

1 0

X2GO is faster...
by cougarmaster 25 Jan '10

25 Jan '10

after I installed freenx on top of it. The downside is it killed the printing for windows and not for ubuntu client. It is way more responsive now than it was before installing freenx. This is on windows xp. Using Ubuntu as the client has no problems except if you open system monitor it bogs down the speed tremendously like it was under heavy load, but there is no cpu usage. In windows it didnt have this problem. So maybe the library from freenx can be used here? The speed difference is definitely big and less lag. All this I am using over internet not local lan. Basically the clients are in China and the server is in Hong Kong and from another location in Hong Kong using USB 3G 3.6Mbps download with 2Mbps upload. Please look into it asap as the windows printing is quite important for us and most of them at this point are not interested in changing to ubuntu yet. Tks in advance, Eric

2 3

x2go client seg fault
by --[ UxBoD ]-- 22 Jan '10

22 Jan '10

Hi, Received latest Ubuntu Karmic patches and X2Go no longer launches : x2goclient Can't load translator (:/x2goclient_en_gb) ! Can't load translator (:/qt_en_GB) ! Segmentation fault My laptop kernel is : uname -a Linux cyborg 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 17:01:44 UTC 2009 x86_64 GNU/Linux and installed X2Go binaries : dpkg -l | grep x2go ii nxcompshad 3.4.0-1-1 nx based library needed by the x2go system ii pinentry-x2go 0.7.5-2 Qt4-based PIN or pass-phrase entry dialog fo ii x2goagent 3.4.0-3-1 Special NX-ized client, was developed by NoM ii x2goclient 3.01-5 x2goclient qt4 client ii x2goprint 3.0.0-1 x2goprint command ii x2goserver 3.0.1-5 x2goserver (daemon and tools) Anyway to capture a backtrace ? Thanks, Phil

1 2

Re: [X2go-dev] Speed of X2go slower than of NXclient
by Heinz-M. Graesing 18 Jan '10

18 Jan '10

> -----Ursprüngliche Nachricht----- > Von: "cougarmaster" <voipster3(a)gmail.com> > Gesendet: 16.01.10 19:55:22 > An: x2go-dev(a)lists.berlios.de > Betreff: Re: [X2go-dev] Speed of X2go slower than of NXclient Hello, > Hi Paul, > The problem is that I find x2go whether it is local or internel takes a bit > more time for it to authenticate than nxclient which is more instantaneous. I have a gotten a lot of feedback, that normally a session can be faster started and resumed - but x2go has an completly different handshake. A used compinent can be responsible for the delay. What you really should check, is that the name resolution is working. You should be able to connect to the server over SSH without delay. > There is also a windows 2003 running there where rdp is running extremely > smooth with about 3 people accessing it at any one time. The bandwitdh on it is > always whether login in or using is below 200k. X2go or nxclient always spikes > up above 500-800K when just login in. When using it jumps up and down between > 200k - 2Mbps. I get this also not only in windows also when the client is Ubuntu. RDP an NX are working completly diffferent. NX needs to fill up the bitmap cache whenever you are using a screenobject for the first time. This will increase the CPU usage on the server, because the bitmaps are cached and it will increase the bandwith consumption, because those pictures need to be delivered to the client. But the whole user feedback of input devices and the x-server ressources are working local. So it is very typical for NX to have a changing bandwith usage. Please keep in mind, that x2go is not developed to be an NX replacement. There are various Open Source clients and even servers which are completly compatible to NX. The idea of x2go was to develop a complete open Terminal Server by using as much as possible already existing native linux projects. For a typical connection time to a x2go server using WLAN you can watch our youtube video: http://www.youtube.com/watch?v=WxEsngE6qjc If you can give us more information, we'll really try to help you. It would be interesting to have an look on the ssh connection (how long does it take to establish the connection) and what services you are using (printing, file sharing, sound - > which sound system). best regards, Heinz ____________________________________________________________________ WEB.DE MillionenKlick: Kostenlos tippen, täglich 1 Million gewinnen! http://produkte.web.de/go/07/

2 1

Speed
by cougarmaster 16 Jan '10

16 Jan '10

Hi, This seems better. Ok to ask a proper question is that for login and working in the remote desktop, nxclient seems to be much quicker and responsive than x2go client in windows. Is there a reason or still need to wait for newer versions? Tks, Eric

4 6

Re: [X2go-dev] cups-x2go fails on Ubuntu
by Heinz-M. Graesing 16 Jan '10

16 Jan '10

> -----Ursprüngliche Nachricht----- > Von: "John A. Sullivan III" <jsullivan(a)opensourcedevel.com> > Gesendet: 16.01.10 06:24:25 > An: x2go-mailing <x2go-dev(a)lists.berlios.de> > Betreff: [X2go-dev] cups-x2go fails on Ubuntu > It complained of > a missing dependency of cups-client. I believe the problem may be that > Ubuntu calls this package cupsys-client. Hello John, please tell me on which version of ubuntu you discovered this problem. On 9.10 I can install cups-x2go without any problems - I'll test it on 9.04 today too: ----8<------------------------------ root@tablet:~# uname -a Linux tablet 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686 GNU/Linux root@tablet:~# apt-get install cups-x2go Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut Lese Status-Informationen ein... Fertig Die folgenden NEUEN Pakete werden installiert: cups-x2go 0 aktualisiert, 1 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen noch 0B von 8.520B an Archiven heruntergeladen werden. Nach dieser Operation werden 111kB Plattenplatz zusätzlich benutzt. Wähle vormals abgewähltes Paket cups-x2go. (Lese Datenbank ... 206496 Dateien und Verzeichnisse sind derzeit installiert.) Entpacke cups-x2go (aus .../cups-x2go_3.0.0-2_all.deb) ... Richte cups-x2go ein (3.0.0-2) ... * Reloading Common Unix Printing System: cupsd [ OK ] root@tablet:~# ----8<------------------------------ best regards, Heinz ___________________________________________________________ Preisknaller: WEB.DE DSL Flatrate für nur 16,99 Euro/mtl.! http://produkte.web.de/go/02/

2 1

Re: [X2go-dev] x2go in cameroon
by Heinz-M. Graesing 16 Jan '10

16 Jan '10

> -----Ursprüngliche Nachricht----- > Von: <kamerun(a)immerda.ch>, <kamerun(a)immerda.ch> > Gesendet: 13.01.10 19:00:43 Hello Michel, > ich habe eine anfrage, ein schulzimmer mit 20 pc einzurichten. Do you wan't to use a PXE boot environment, or do you wan't to store a minimal OS on local storage devices? > x2go-home (also ubuntu machine) einzusetzen, Please keep in mind, that we only test 9.10 and 9.04 with x2go-home (at the moment -> so we'll need to make a reliable plan for ubuntu, if it is still not maintained by ubuntu itself after the next release). > 2x1 servers (im fall ein austeigt, haben wir trotzdem ein netz > mit allen clients) If you plan to use both severs at the same time, debian + x2go + ldapd + pxe boot + load balancing would be an attractive installation alternative. The load balancing feature is part of x2go. > aber ich mache sonst netz mit 5 machinen, mit 10 clients habe ich keine > erfharungen. I really don't have any experience with low power machines as servers. We are developing on a 1,5 GHZ Centrino 2GB device and we can say, that memory is more needed than cpu power. Maybe it is really a good idea to ask Paul about his servers. best regards, Heinz ___________________________________________________________ Preisknaller: WEB.DE DSL Flatrate für nur 16,99 Euro/mtl.! http://produkte.web.de/go/02/

1 0

x2go in cameroon
by kamerun＠immerda.ch 16 Jan '10

16 Jan '10

ich habe eine anfrage, ein schulzimmer mit 20 pc einzurichten. ich stelle mir vor, x2go-home (also ubuntu machine) einzusetzen, 2x1 servers (im fall ein austeigt, haben wir trotzdem ein netz mit allen clients) 2x10 pcengines 3x1 switches 1 für internet 2 intranet 20x1 ethernet kabeln 20X1 flach monitor 5X1 distributors warum 2 servers? nach meinen erfahrungen ist es besser 2 servers als ein, im fall der server steigt aus, so ist nicht die gesamte anlage weg. aber ich mache sonst netz mit 5 machinen, mit 10 clients habe ich keine erfharungen. dazu strebe ich low power computer, da ich sonnenenergie anpeile. als client benütze ich die alix board (www.pcengines.ch) jede anregung bin ich dankbar und es pressiert noch dazu michel in cameroon server: es gibt jetzt mini itx mit nano, aber atom 330 ist ok, ist es stark genug für 10 clients?

3 2

Re: [X2go-dev] Forum
by Heinz-M. Graesing 16 Jan '10

16 Jan '10

Hello Cougar, there was/(still is) a forum on berlios. We have decided that it would be better to store all messages regarding x2go in one place. To ease the access the mailing list is registered by gmane. Please read this post and visit : https://lists.berlios.de/pipermail/x2go-dev/2009-December/000221.html If you are using gmane , the mailinglist will just look like a forum and you'll be able to post messages. An overview of all functions can be found here: http://dir.gmane.org/gmane.linux.terminal-server.x2go.devel A very good feature -in my eyes - is the possibility to access the list by rss feed. Welcome on the list! best regards, Heinz > -----Ursprüngliche Nachricht----- > Von: "cougar" <voipster3(a)gmail.com> > Gesendet: 16.01.10 06:30:33 > An: x2go-dev(a)lists.berlios.de > Betreff: [X2go-dev] Forum > Hi all, > Just wondering is there a plan to start a forum? > > Tks Rgds, > Eric > > _______________________________________________ > X2go-dev mailing list > X2go-dev(a)lists.berlios.de > https://lists.berlios.de/mailman/listinfo/x2go-dev > --heinz-m. graesing-- ______________________________________________________ GRATIS für alle WEB.DE-Nutzer: Die maxdome Movie-FLAT! Jetzt freischalten unter http://movieflat.web.de

1 0

Forum
by cougar 16 Jan '10

16 Jan '10

Hi all, Just wondering is there a plan to start a forum? Tks Rgds, Eric

1 0

cups-x2go fails on Ubuntu
by John A. Sullivan III 16 Jan '10

16 Jan '10

Hello, all. I don't think this is a major issue for us as we plan to use a centralized Debian cups server. However, in our initial testing, we attempted to use X2GoPrint with X2GoServer-Home on Ubuntu Hardy. X2GoServer-Home is working fine and x2goprint installed without a problem. However, the cups-x2go installation failed. It complained of a missing dependency of cups-client. I believe the problem may be that Ubuntu calls this package cupsys-client. I thought I'd point it out as I would imagine it is a trivial change to make in the packaging if we want a cups-x2go package to go along with X2GoServer-Home and X2GoServer-One - John

1 0

FUSE reFUSEs to install
by John A. Sullivan III 15 Jan '10

15 Jan '10

Hello, all. We are trying to install a Debian Lenny vserver on a CentOS 5.4 host running a custom kernel - 2.6.28.7-vs2.3.0.36.7. We are trying to install fuse-utils and sshfs for use wit X2Go (a great project for those unfamiliar with it - www.x2go.org) We keep getting: Setting up fuse-utils (2.7.4-1.1) ... creating fuse group... udev active, skipping device node creation. udev requires a mounted sysfs, not started. failed! failed! invoke-rc.d: initscript udev, action "reload" failed. dpkg: error processing fuse-utils (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of sshfs: sshfs depends on fuse-utils (>= 2.7); however: Package fuse-utils is not configured yet. dpkg: error processing sshfs (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: fuse-utils sshfs In the past, we simply created the fuse device manually and added SECURE_MOUNT SECURE_REMOUNT BINARY_MOUNT to ccapabilities Short of giving SYS_ADMIN and running udev, how do we get this to work? Thanks - John

1 1

x2go Web client is needed
by brian mullan 09 Jan '10

09 Jan '10

The effort of supporting on 3 different installable clients for Mac, Linux, Windows would seem *lessened* if there was just a single Web client (java/php) for x2go. It would also open x2go's server side capabilities to many more potential users.

1 0

Share database for multiple X2Go servers
by John A. Sullivan III 09 Jan '10

09 Jan '10

Hello, all. My rusty brain is gradually remembering the work we did a year ago when we first started adapting X2Go to our environment where we run a virtual vserver for each user so there is a one-to-one correspondence between virtual machines and virtual desktops. One of the important changes for our environment was to be able to run a single database server for all the (hopefully) thousands of individual X2Go servers. I know tha X2GoServer-One is designed for this and uses SQLite. However, I would rather run a single PostgreSQL server for 2000 X2GoServer instances than running 2000 instances of SQLite on the virtual desktop host. We had submitted patches roughly a year ago for supporting a shared database. A quick look at the wrapper scripts seems to indicate they weren't incorporated. Is there a better way? Is this natively supported now? Or will we need to reapply our patches to use PostgreSQL schema for each user? Thanks and thrilled to be back on board with X2Go - John

1 0

OT: X2Go desktop distribution choices
by John A. Sullivan III 06 Jan '10

06 Jan '10

Hello, all. We have been struggling over whether we wanted to offer Ubuntu or Fedora desktops to our users via X2Go. However, as we struggle in that debate, we are unexpectedly beginning to entertain the idea of using Debian instead. May I ask what your experiences have been? What are your preferred desktop clients and why? If Debian, is it stable + backports or testing? We are looking at supporting potentially many thousands of these desktops. Thanks - John

2 3

Re: [X2go-dev] Session Shadowing, Usb Device
by Heinz-M. Graesing 05 Jan '10

05 Jan '10

> -----Ursprüngliche Nachricht----- > Von: <Peter.Seckler(a)gmx.net> > Gesendet: 05.01.10 14:43:36 > An: x2go-dev(a)lists.berlios.de > Betreff: [X2go-dev] Session Shadowing, Usb Device Hello Peter, we are currently working on the session shadowing feature. It will be the first new feature in 2010. I think - with luck - you'll be able to test it in january. At the moment we support only usb mass-storage devices, printers - and on thin clients cdroms too. Whenever there is a native network access possible like using "sane", it is possible to use our tunnel. We don't support USB device nodes which should be recordnized by the server. SmartCard access was an often requested feature and we are thinking about an elegant solution. best regards, Heinz > I recently installed x2go, and the feature that I really miss is the possibility for session shadowing. It would be great for me to help my users from a remote location if they have a problem. Is something like this planned for a future release? > > One other question: is it possible to connect a usb device other than memory sticks to the client and "tunnel" it to the server? I'd like to use a card reader for the home banking software (money plex) with x2go. ___________________________________________________________ Preisknaller: WEB.DE DSL Flatrate für nur 16,99 Euro/mtl.! http://produkte.web.de/go/02/

1 0

Proxy Disconnect
by --[ UxBoD ]-- 05 Jan '10

05 Jan '10

Hi, we have recently started to use X2GO, and have to say it is great, though ran into a small issue today. I was happily connected to my remote KDE desktop when my physical desktop disconnected from the network. On attempting to reconnect to the session I received a error message like "Proxy session disconnect" (apologies; did not write it down). I connected to via SSH to the virtual desktop and restarted the x2go service, attempted a connection again, but still got the same error. I noticed looking at the process list a couple of extra ssh sessions; for which I killed them all off and attempted another connection. This time it was successful. If a session becomes detached due to the physical machine, for arguments sake, crashing should the client fail to connect ? Best Regards,

1 0

Session Shadowing, Usb Device
by Peter.Seckler＠gmx.net 05 Jan '10

05 Jan '10

Hi, I recently installed x2go, and the feature that I really miss is the possibility for session shadowing. It would be great for me to help my users from a remote location if they have a problem. Is something like this planned for a future release? One other question: is it possible to connect a usb device other than memory sticks to the client and "tunnel" it to the server? I'd like to use a card reader for the home banking software (money plex) with x2go. Greetings Peter -- Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3.5 - sicherer, schneller und einfacher! http://portal.gmx.net/de/go/atbrowser

1 0

X2go using ARM-based clients?
by Jo-Erlend Schinstad 04 Jan '10

04 Jan '10

Is X2Go client ported to ARM for Debian and Ubuntu? That'd be neat! :) Thanks, Jo-Erlend

2 1

x2go in cameroon
by kamerun＠immerda.ch 30 Dec '09

30 Dec '09

hello all, first thank you for the answers and encouragement, we (my cameroonian friends and i) are still struugling to build y2to network and it works, but... i work with pcengines.ch alix board (www.pcengines.ch) as pxe client with a x2go-home (ubuntu 9.10 without ldap). it works until the graphics and it stops. the lcd monitor shows frequence fH 89 khz (red) frequence fV 59.8 hz and the fH is written in red, i suppose the frequency is to high i run puppy on the client and i have xwindow, so i copy the xorg.conf file to /opt/thinclient.../etcX11/xorg.conf but the graphics does not come at all i copy than the xorg.conf from the virtual machine (i send it as attach) and it works, but... the graphic from the browser are not coming well when i put "verbindung" on lan, i get some pictures (for example google start page with blue turkis colour. one person ask me to to make a screenshot, but ... o the screen shot it is "normal" (no turkis colour). i ask www.pcengines.ch and i recieve a documentation, (i send it as attach), i test it, but it was not working, may be i made a mistake, i test many configuration, but no success. i had a similar problem with ltsp and i had to put in lts.conf X_MODE_0 = 1024x768 i am looking now for a long if there is such a file in x2go, i did not find, so i want to configure a client, where can i put configuration i want? ok after many tests, i give up and hope somebody can help us warm salutations (if somebody would like to have sun, just mail us, we have sun, warm!!!! michel ------------------------------------------------------------------------ # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg # inserted : 09Sep2009 12:46/pa config/hal could not iniitialize context ... Section "ServerFlags" # Option "AutoAddDevices" "false" # Option "AutoEnableDevices" "false" # Option "AllowEmptyInput" "false" # added 14Nov2009 15:40/pa : Option "DontVTSwitch" "false" EndSection # ------------------------------------------------------------------ Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbRules" "xorg" # Option "XkbModel" "pc104" Option "XkbModel" "pc102" Option "XkbLayout" "sg" #xkeymap0 ???(Puppy 4.21/pa) # 14Nov2009 17:08/pa : ctrl-alt-1 virtual console activate ??? # funktioniert nicht... # Option "Xkbdisable" "true" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" #mouse0protocol ???(Puppy 4.21/pa) #Option "Device" "/dev/mouse" #Option "Emulate3Buttons" #Option "Emulate3Timeout" "50" #Option "ZAxisMapping" "4 5" #scrollwheel EndSection Section "Device" Identifier "Card0" EndSection Section "Monitor" Identifier "Monitor0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 Subsection "Display" Depth 16 Modes "1024x768" EndSubsection EndSection # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg # inserted : 09Sep2009 12:46/pa config/hal could not iniitialize context ... Section "ServerFlags" # Option "AutoAddDevices" "false" # Option "AutoEnableDevices" "false" # Option "AllowEmptyInput" "false" # added 14Nov2009 15:40/pa : Option "DontVTSwitch" "false" EndSection # ------------------------------------------------------------------ Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbRules" "xorg" # Option "XkbModel" "pc104" Option "XkbModel" "pc102" Option "XkbLayout" "sg" #xkeymap0 ???(Puppy 4.21/pa) # 14Nov2009 17:08/pa : ctrl-alt-1 virtual console activate ??? # funktioniert nicht... # Option "Xkbdisable" "true" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" #mouse0protocol ???(Puppy 4.21/pa) #Option "Device" "/dev/mouse" #Option "Emulate3Buttons" #Option "Emulate3Timeout" "50" #Option "ZAxisMapping" "4 5" #scrollwheel EndSection Section "Device" Identifier "Card0" EndSection Section "Monitor" Identifier "Monitor0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 Subsection "Display" Depth 16 Modes "1024x768" EndSubsection EndSection

1 0

GPG key missing
by John A. Sullivan III 29 Dec '09

29 Dec '09

Hello, all. I'm not a great expert at using gpg so I'm simply following the instructions on the X2Go web site. It seems I cannot retrieve the key: root@vdbase:/dev# gpg --keyserver wwwkeys.eu.pgp.net --recv-keys C509840B96F89133 gpg: requesting key 96F89133 from hkp server wwwkeys.eu.pgp.net gpg: keyserver timed out gpg: keyserver receive failed: keyserver error If I go to wwwkeys.eu.pgp.net and search for the key, it says it cannot find it. What am I doing wrong? Thanks - John

3 3

x2go in cameroon
by kamerun＠immerda.ch 29 Dec '09

29 Dec '09

hello all, first thank you for the answers and encouragement, we (my cameroonian friends and i) are still struugling to build y2to network and it works, but... i work with pcengines.ch alix board (www.pcengines.ch) as pxe client with a x2go-home (ubuntu 9.10 without ldap). it works until the graphics and it stops. the lcd monitor shows frequence fH 89 khz (red) frequence fV 59.8 hz and the fH is written in red, i suppose the frequency is to high i run puppy on the client and i have xwindow, so i copy the xorg.conf file to /opt/thinclient.../etcX11/xorg.conf but the graphics does not come at all i copy than the xorg.conf from the virtual machine (i send it as attach) and it works, but... the graphic from the browser are not coming well when i put "verbindung" on lan, i get some pictures (for example google start page with blue turkis colour. one person ask me to to make a screenshot, but ... o the screen shot it is "normal" (no turkis colour). i ask www.pcengines.ch and i recieve a documentation, (i send it as attach), i test it, but it was not working, may be i made a mistake, i test many configuration, but no success. i had a similar problem with ltsp and i had to put in lts.conf X_MODE_0 = 1024x768 i am looking now for a long if there is such a file in x2go, i did not find, so i want to configure a client, where can i put configuration i want? ok after many tests, i give up and hope somebody can help us warm salutations (if somebody would like to have sun, just mail us, we have sun, warm!!!! michel # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg # inserted : 09Sep2009 12:46/pa config/hal could not iniitialize context ... Section "ServerFlags" # Option "AutoAddDevices" "false" # Option "AutoEnableDevices" "false" # Option "AllowEmptyInput" "false" # added 14Nov2009 15:40/pa : Option "DontVTSwitch" "false" EndSection # ------------------------------------------------------------------ Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbRules" "xorg" # Option "XkbModel" "pc104" Option "XkbModel" "pc102" Option "XkbLayout" "sg" #xkeymap0 ???(Puppy 4.21/pa) # 14Nov2009 17:08/pa : ctrl-alt-1 virtual console activate ??? # funktioniert nicht... # Option "Xkbdisable" "true" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" #mouse0protocol ???(Puppy 4.21/pa) #Option "Device" "/dev/mouse" #Option "Emulate3Buttons" #Option "Emulate3Timeout" "50" #Option "ZAxisMapping" "4 5" #scrollwheel EndSection Section "Device" Identifier "Card0" EndSection Section "Monitor" Identifier "Monitor0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 Subsection "Display" Depth 16 Modes "1024x768" EndSubsection EndSection

1 0

X2Go + VServer problem
by John A. Sullivan III 29 Dec '09

29 Dec '09

Oops! Just hit a big problem. I'm trying to install X2GoServer-One into a VServer running Ubuntu Karmic. We have done this successfully in the past with Hardy. The combination of X2Go and VServer offers incredible potential - in our case much greater than with hypervisor style virtualization. However, we are hitting a major dependency problem in Karmic. In VServer, we are not using any of the hardware directly. In the past, we set the xorg.conf driver to dummy. However, Karmic is behaving differently. When installing xserver-xorg, it insists on writing to /proc/mtrr which is not allowed in a vserver for security reasons. We spent two days doing it but have successfully installed KDE and Gnome without having to install xserver-xorg. The problem is that X2Go is insisting on xserver-xorg as a dependency. This may be indirect as I see it is also asking for xinit and Karmic sets xserver-xorg as a dependency for xinit. Is there a way to install without this dependency on xserver-xorg? This is a critical problem for us. Thanks - John

1 1

Re: [X2go-dev] Home versus one
by Heinz-M. Graesing 28 Dec '09

28 Dec '09

> -----Ursprüngliche Nachricht----- > Von: "John A. Sullivan III" <jsullivan(a)opensourcedevel.com> > Gesendet: 27.12.09 06:38:41 > An: x2go-dev(a)lists.berlios.de > Betreff: [X2go-dev] Home versus one > Hello, all. We are eagerly anticipating installing X2Go in our CentOS / > Ubuntu Karmic VServer environment in this coming week. We are > evaluating our X2Go options and are a little unclear about the exact > differences between X2GoServer-Home and X2GoServer-One. Could someone > please explain the difference? Thanks - John > Hello John, both are metapackages. x2goserver-one will configure x2goserver to use a sqlight database instead of postgresqql. So with the added sudo entries a installation without user interaction is possible. x2goserver-home is a metapackage containing all modifications needed for ubuntu - at the moment there are none. In the past we've changed the whole project to keep compatible to ubuntu. This had some side effects on the main project we'll don't wan't to happen again. Both packages are installing a single server setup, which fits perfectly in virtual machines. best regards, Heinz ___________________________________________________________ Preisknaller: WEB.DE DSL Flatrate für nur 16,99 Euro/mtl.! http://produkte.web.de/go/02/

2 1

Re: [X2go-dev] X2go using ARM-based clients?
by Heinz-M. Graesing 27 Dec '09

27 Dec '09

> -----Ursprüngliche Nachricht----- > Von: "Jo-Erlend Schinstad" <joerlend.schinstad(a)gmail.com> > Gesendet: 27.12.09 16:31:51 > An: x2go-dev(a)lists.berlios.de > Betreff: [X2go-dev] X2go using ARM-based clients? > Is X2Go client ported to ARM for Debian and Ubuntu? That'd be neat! :) Hello Jo-Erlend, There is a port for Maemo: # x2go Reopsitory Web address: http://x2go.obviously-nice.de/deb Distribution: diablo Components: main I don't know if there are ARM devices with identical hardware like the Nokia N8*0 tablets. But you may try it. best regards, Heinz ___________________________________________________________ Preisknaller: WEB.DE DSL Flatrate für nur 16,99 Euro/mtl.! http://produkte.web.de/go/02/

1 0

Re: [X2go-dev] X2GO Cluster en load balancing
by Heinz-M. Graesing 27 Dec '09

27 Dec '09

Hello Jasper, you'll need to have an working x2go LDAP installation to use load balancing. All working servers are added via the ldap.addserver command - for example ldap.addserver x2goserver 192.168.0.250. Every Server added this way can be requested by x2goclient, which will choose the one with the lowest numbers of users. It is possible to enter a "ratio" to each server to prefer servers with more power (it's done inside the ON branch of the LDAP Tree). Best Regards, Heinz > -----Ursprüngliche Nachricht----- > Von: "jasper van der marel" <jaspervandermarel(a)gmail.com> > Gesendet: 24.12.09 12:05:55 > An: x2go-dev(a)lists.berlios.de > Betreff: [X2go-dev] X2GO Cluster en load balancing > Hi, > > I've got a challenge writing a proposal for a client of ours. > The client has around 150 simultanously logged in users and he wants > to migrate to a Windows thinclient network. > I looked at LTSP-Cluster and of course at X2GO. > > Has X2GO the same features like load-balancing the thinclients in a > farm of servers ? > I cannot find any documentation regarding setting up a load balanced > farm with X2GO. > Can someone point me in the right direction ? > > With kind regards, > > Jasper van der Marel > _______________________________________________ > X2go-dev mailing list > X2go-dev(a)lists.berlios.de > https://lists.berlios.de/mailman/listinfo/x2go-dev > --heinz-m. graesing-- ______________________________________________________ GRATIS für alle WEB.DE-Nutzer: Die maxdome Movie-FLAT! Jetzt freischalten unter http://movieflat.web.de

2 1

Home versus one
by John A. Sullivan III 27 Dec '09

27 Dec '09

Hello, all. We are eagerly anticipating installing X2Go in our CentOS / Ubuntu Karmic VServer environment in this coming week. We are evaluating our X2Go options and are a little unclear about the exact differences between X2GoServer-Home and X2GoServer-One. Could someone please explain the difference? Thanks - John

1 0

X2GO Thinclient enviroment setup
by jasper van der marel 24 Dec '09

24 Dec '09

Hi, I followed both manuals (linux4afrika and the x2go manual) for setting up an thinclient enviroment. I can boot a thinclient and the thinclient sees the ldapusers but the user can not login. When a user tries to login I get brief moment a blank screen and the user returns to the menu. When I try to use the x2go client on the server itself I can login with username//password but I cannot login when I try to use the LDAP option in the client. What went wrong ? Thanks in advance, Jasper van der Marel

2 2

Re: [X2go-dev] X2GO Thinclient enviroment setup
by Heinz-M. Graesing 24 Dec '09

24 Dec '09

> -----Ursprüngliche Nachricht----- > Von: "jasper van der marel" <jaspervandermarel(a)gmail.com> > Gesendet: 24.12.09 14:39:08 > An: x2go-dev(a)lists.berlios.de > Betreff: [X2go-dev] X2GO Thinclient enviroment setup > Hi, > > I followed both manuals (linux4afrika and the x2go manual) for setting > up an thinclient enviroment. > I can boot a thinclient and the thinclient sees the ldapusers but the > user can not login. When a user tries to login I get > brief moment a blank screen and the user returns to the menu. When I > try to use the x2go client on the server itself I can > login with username//password but I cannot login when I try to use the > LDAP option in the client. > > What went wrong ? Hello Jasper, please make sure, that the home directories are writeable for the users. Best Regards, Heinz ___________________________________________________________ Preisknaller: WEB.DE DSL Flatrate für nur 16,99 Euro/mtl.! http://produkte.web.de/go/02/

1 0

Seasons greetings
by Heinz-M. Graesing 24 Dec '09

24 Dec '09

Hello x2go users, We wish you a merry christmas and a happy new year! Next year one of the next features added to x2go will be the requested "session shadowing". It'll make it possible to share an existing Desktop over x2go with one or more other users. This too will be possible with x2go Displays. Happy Holidays, The x2go developers... ___________________________________________________________ Preisknaller: WEB.DE DSL Flatrate für nur 16,99 Euro/mtl.! http://produkte.web.de/go/02/

1 0

X2GO Cluster en load balancing
by jasper van der marel 24 Dec '09

24 Dec '09

Hi, I've got a challenge writing a proposal for a client of ours. The client has around 150 simultanously logged in users and he wants to migrate to a Windows thinclient network. I looked at LTSP-Cluster and of course at X2GO. Has X2GO the same features like load-balancing the thinclients in a farm of servers ? I cannot find any documentation regarding setting up a load balanced farm with X2GO. Can someone point me in the right direction ? With kind regards, Jasper van der Marel

1 0

Failed login from MS Windows Client
by Milan Knížek 18 Dec '09

18 Dec '09

Hello, I am testing x2go to replace NoMachine's NX server (for home use). The server is Ubuntu 9.10 amd64, with x2goserver-home 3.0.1-1 Connecting from another Ubuntu on LAN worked fine. However, connecting from MS Windows XP machine at work (through ssh tunnel to pass-through http proxy) fails due to wrong password. The MS Windows client (version 3.01-2) is setup to use localhost at ssh port 1022. I have disabled any file and printer sharing and also audio tunnelling. Here is the /var/log/auth.log from server: Dec 17 14:13:21 athlon sshd[19717]: Failed password for xxx from ::1 port 37418 ssh2 Dec 17 14:13:21 athlon sshd[19717]: Failed password for xxx from ::1 port 37418 ssh2 Dec 17 14:13:21 athlon sshd[19717]: Failed password for xxx from ::1 port 37418 ssh2 The error from MS Windows client is: Wrong password! Connection failed localhost: Unable to connect D:/Documents and Settings/username/.x2go/ssh/socaskpass.nf2668 etc. .... Permission denied. Please try again. The file in that directory does not exist. I can successfully open a ssh session from cygwin using: $ ssh xxx@localhost -p1022 I tried to use the new beta version of the client, but it requires admin privileges on MS Windows computer, which I do not have. Any ideas? Regards, Milan Knizek knizek (dot) confy (at) volny (dot) cz http://www.milan-knizek.net - About linux and photography (Czech language only)

1 2

keyboard not working quite right in gtk client...
by Milan Knížek 18 Dec '09

18 Dec '09

> > After installing X2go I see my auth.log is growing. > I see this: ... > I did a "/etc/init.d/x2goserver stop" and that helps. > And I can still login on the X2go server! > > I see it is checking the database, but I don't understand why exactly. > Is it really necessary to do this every 5 seconds? ... > I saw you can change the sleep-time (5 seconds) in this script: > /usr/sbin/x2gocleansessions > but I am not sure this is a good idea... > > With regards. > Paul van der Vlis. > Paul, have you made any progress on this matter? While I guess there is a reason for checking the sessions periodically, I wonder why /usr/bin/x2golistsessions_sql runs "/usr/bin/x2gopgwrapper listessionsroot $serv" as sudo, when the daemon itself runs with root privileges already. Is it just because logging the activity is wanted? Regards, Milan Knizek knizek (dot) confy (at) volny (dot) cz http://www.milan-knizek.net - About linux and photography (Czech language only)

1 0

X2Go Ubuntu 9.10 sound
by jasper van der marel 14 Dec '09

14 Dec '09

Hi, When connecting to an Ubuntu 9.10 desktop with X2GO I don't get sound at the clientside. In the logfile I get : debug1: channel 0: new [::1] debug1: confirm forwarded-tcpip debug1: channel 0: connection failed: Connection refused debug1: connect_next: host localhost ([127.0.0.1]:4713) in progress, fd=5 Anybody got a solution ? Many thanks in advance. Jasper van der Marel

1 0

record audio from client to x2goserver
by jasper van der marel 14 Dec '09

14 Dec '09

Hi, Is it possible to record audio from the x2goclient on the x2goclient ? Sound playback from server to client works, but can I also record sound ? With kind regards, Jasper van der Marel

1 0

desktop virtualization
by Robert Markula 12 Dec '09

12 Dec '09

Hi all, JFYI, regarding your latest poll on the topic of desktop virtualization, there is some interesting thread located at linuxforen.de [1]. Cheers, Robert [1] http://www.linuxforen.de/forums/showthread.php?s=83251ee2ee2c4aa6564583cf22…

1 0

Re: [X2go-dev] x2go and ssh-key based login
by jasper van der marel 12 Dec '09

12 Dec '09

Hi Robin, Just tweaked a little more and it works like you described it. It seems the ssh key had to many rights when transfered to the Windows desktop. I can now log in with an encrypted ssh-key by filling in the password field of the user. Many thanks for the solution. With kind regards, Jasper van der Marel 2009/12/12 Robin Gloster <robin.gloster(a)googlemail.com>: > hi, > > yes, that's like i have it. > then i put in the user i want to log on to an the ssh key's pwd > > Best regards, > > Robin > > > 2009/12/12 jasper van der marel <jaspervandermarel(a)gmail.com> >> >> Hi Robin, >> >> That solution doesn't work because when using sshkeys there is no >> option to fill in the password. >> You simply get the error message permission denied (public key). >> >> In second instance you get a window to fill in a username/password but >> this only applies to password auyjentication. >> I have tighten the security on the server (changed the ssh port and >> only allowing ssh keys to authenticate). so password authenication >> doesn't work >> >> Best regards, >> >> Jasper van der Marel >> >> 2009/12/12 Robin Gloster <robin.gloster(a)googlemail.com>: >> > Hi, >> > >> > In the password field, ypu have to type in the ssh-key password and not >> > the >> > user password. >> > Then all should work. >> > >> > Best regards, >> > >> > Robin >> > >> > 2009/12/12 jasper van der marel <jaspervandermarel(a)gmail.com> >> >> >> >> Hi, >> >> >> >> To secure an x2go terminalserver enviroment from the bad big world >> >> outside we are thinking of implementing ssh-key based authenication. >> >> This works wonderfully with unencrypted ssh-keys. With encrypted >> >> ssh-keys it won't work because of the password challenge. Is there any >> >> way it can work with the x2goclient ? Then we can change the passwords >> >> set on the ssh-keys at an interval instead of reissuing ssh-keys. Any >> >> other ideas about implementing otp passwords with x2go are very >> >> welcome ;) >> >> >> >> In case you are wondering or interested about the client we are >> >> planning to implement x2go as a terminalserver solution: >> >> >> >> >> >> >> >> http://www.osor.eu/news/more-health-care-organisations-adopting-open-source >> >> -> part about Antonius Hospital in the Netherlands >> >> >> >> With kind regards, >> >> >> >> Jasper van der Marel >> >> Stone-IT >> >> >> >> http://www.stone-it.com >> >> _______________________________________________ >> >> X2go-dev mailing list >> >> X2go-dev(a)lists.berlios.de >> >> https://lists.berlios.de/mailman/listinfo/x2go-dev >> > >> > > >

1 0

ssh-keygen login and session shadowing
by jasper van der marel 12 Dec '09

12 Dec '09

Hi, I've installed a debian lenny machine for futher testing x2go and managed to get ldap etc running. I can do session shadowing (kcontrol with vnc) when a user logs in with username/password. But when a user logs in in a much more secure environment (altered ssh ports and only allowing ssh keybased authenication) I no longer can shadow the session. Is this a known issue ? With kind regards, Jasper van der Marel Stone-IT

1 0

Re: [X2go-dev] x2go and ssh-key based login
by jasper van der marel 12 Dec '09

12 Dec '09

Hi Robin, That solution doesn't work because when using sshkeys there is no option to fill in the password. You simply get the error message permission denied (public key). In second instance you get a window to fill in a username/password but this only applies to password auyjentication. I have tighten the security on the server (changed the ssh port and only allowing ssh keys to authenticate). so password authenication doesn't work Best regards, Jasper van der Marel 2009/12/12 Robin Gloster <robin.gloster(a)googlemail.com>: > Hi, > > In the password field, ypu have to type in the ssh-key password and not the > user password. > Then all should work. > > Best regards, > > Robin > > 2009/12/12 jasper van der marel <jaspervandermarel(a)gmail.com> >> >> Hi, >> >> To secure an x2go terminalserver enviroment from the bad big world >> outside we are thinking of implementing ssh-key based authenication. >> This works wonderfully with unencrypted ssh-keys. With encrypted >> ssh-keys it won't work because of the password challenge. Is there any >> way it can work with the x2goclient ? Then we can change the passwords >> set on the ssh-keys at an interval instead of reissuing ssh-keys. Any >> other ideas about implementing otp passwords with x2go are very >> welcome ;) >> >> In case you are wondering or interested about the client we are >> planning to implement x2go as a terminalserver solution: >> >> >> http://www.osor.eu/news/more-health-care-organisations-adopting-open-source >> -> part about Antonius Hospital in the Netherlands >> >> With kind regards, >> >> Jasper van der Marel >> Stone-IT >> >> http://www.stone-it.com >> _______________________________________________ >> X2go-dev mailing list >> X2go-dev(a)lists.berlios.de >> https://lists.berlios.de/mailman/listinfo/x2go-dev > >

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

x2go-dev