x2go-dev August 2014

x2go-dev@lists.x2go.org

31 participants
143 discussions

Question about how x2goclient tells x2goserver what session type to launch
by Michael DePaulo 01 Oct '14

01 Oct '14

Mike#1 (or anyone else who can answer this), You linked me to this MATE commit as an example of how I should add Cinnamon support to x2goclient (bug #571): http://code.x2go.org/gitweb?p=x2goclient.git;a=commitdiff;h=468be3aa8d457ec… I thought that x2goclient merely specified a session type with a string like "MATE". So I do not understand the logic in ONMainWindow::runCommand() and SessionButton::slot_cmd_change( const QString& command ), where command is changed from "MATE" to "mate-session" and then back. Furthermore, 1. pyhoca-gui doesn't do anything like that: http://code.x2go.org/gitweb?p=pyhoca-gui.git;a=commitdiff;h=af60d3076e8cb45… 2. With my proposal for fixing #569, there are 3 possible commands that can be used to launch Cinnamon. -Mike

2 4

Bug#525: x2goclient.exe shows "arrow and hourglass" cursor for 5 seconds during startup
by Stefan Baur 19 Sep '14

19 Sep '14

Package: x2goclient Version: 4.0.2.1-pre01 Hi, x2goclient for Windows up to 4.0.0.3 used to look "frozen" for a fraction of a second during startup. With 4.0.2.0, that annoying effect was suddenly gone, possibly due to the change to the new pulseaudio version. It is also not present in the nightlies up until 2014-06-11. 4.0.2.1-pre01 now exhibits a similar, slightly annoying behavior: When run by double-click from a folder view, it displays an "arrow and hourglass" cursor on Windows 7 x64 for approximately 5 seconds during startup. It does not happen when the same x2goclient.exe is run from the commandline. There, response is instantaneous like in 4.0.2.0 and in the nightlies up to 2014-06-11. I have no explanation for that effect, but maybe one of our devs can shed some light on this? -Stefan

2 3

Bug#566: X2Go Client for Windows 4.0.2.1 cannon create C:\Users\<username>\ssh\known_hosts file when the local Windows account username has non-English characters
by George Trakatelis 15 Sep '14

15 Sep '14

Package: x2goclient Version: 4.0.2.1 When I try to connect to a remote server, I cannot get past the pop-up 'Host key verification failed' The server is unknown. Do you trust the host key? Public key hash: xxx.xxx.xxx.xxx:22 - xx.xx.xx.xx.xx.xx.xx.xx.xx.xx.xx.xx.xx.xx.xx.xx no matter how many times I click Yes. The pop-up appears again and again. It seems that x2goclient cannot create the folder C:\Users\<username>\ssh and the known_hosts file when <username> has non-English characters. Confirmed that it works fine when <username> is in English. I'm using Greek Windows 8.1 Pro 64-bit and X2Go Client for Windows 4.0.2.1+hotfix1+build3.

2 1

EPEL-7 nightly builds...
by Mike Gabriel 10 Sep '14

10 Sep '14

Hi all, I have for now disbabled our (regularly failing) nightly builds of X2Go development snapshot packages for upcoming RHEL7 with EPEL-7 support. The people at Redhat seem to change repo URLs more often than other people change their socks. Thus, let's wait for the new RHEL7 release to consolidate more... Mike PS: if someone can provide me with an intact mock config for epel-7-x86_64, I will consider reenabling those nightly build jobs. -- DAS-NETZWERKTEAM mike gabriel, herweg 7, 24357 fleckeby fon: +49 (1520) 1976 148 GnuPG Key ID 0x25771B31 mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x…

2 5

nx-libs git tree
by Ulrich Sibiller 09 Sep '14

09 Sep '14

Hi, it looks like the nx-libs git tree starts with the files contained in nomachines' source release nx-X11-3.1.0-1.tar.gz (and accompanied source tarballs). I have several source tarballs that have been released before that, e.g.: nx-X11-1.3.0-6.tar.gz nx-X11-1.3.1-12.tar.gz nx-X11-1.3.2-8.tar.gz nx-X11-1.3.2-9.tar.gz nx-X11-1.4.0-10.tar.gz nx-X11-1.4.0-1.tar.gz nx-X11-1.4.0-3.tar.gz nx-X11-1.4.0-4.tar.gz nx-X11-1.4.0-6.tar.gz nx-X11-1.4.0-7.tar.gz nx-X11-1.4.0-9.tar.gz nx-X11-1.5.0-14.tar.gz nx-X11-1.5.0-15.tar.gz nx-X11-1.5.0-18.tar.gz nx-X11-1.5.0-21.tar.gz nx-X11-1.5.0-4.tar.gz nx-X11-1.5.0-7.tar.gz nx-X11-1.5.0-9.tar.gz nx-X11-2.0.0-31.tar.gz nx-X11-2.1.0-2.tar.gz nx-X11-2.1.0-3.tar.gz nx-X11-3.0.0-35.tar.gz nx-X11-3.0.0-37.tar.gz (+ accompanied tarballs. See attachment for full list). I think these should also be merged into the git tree for reference. What do you think? Uli -- ______________________________________creating IT solutions Dipl.-Inf. Ulrich Sibiller science + computing ag System Administration Hagellocher Weg 73 http://www.science-computing.de 72070 Tuebingen, Germany -- Vorstandsvorsitzender/Chairman of the board of management: Gerd-Lothar Leonhart Vorstand/Board of Management: Dr. Bernd Finkbeiner, Michael Heinrichs, Dr. Arno Steitz Vorsitzender des Aufsichtsrats/ Chairman of the Supervisory Board: Philippe Miltin Sitz/Registered Office: Tuebingen Registergericht/Registration Court: Stuttgart Registernummer/Commercial Register No.: HRB 382196

2 5

Bug#587: x2goclient is missing VcXsrv/zlib1.dll
by Ivan Kozik 02 Sep '14

02 Sep '14

Package: x2goclient Severity: critical Version: 4.0.2.1 x2goclient-4.0.2.1+hotfix1+build3-setup.exe does not install VcXsrv/zlib1.dll, which leads X2Go Client to fail to connect with "Can't start X Server / Please check your installation". You can also check by running vcxsrv.exe and seeing the missing-DLL dialog. This worked fine with x2goclient-4.0.2.0-setup.exe Thanks, Ivan

4 8

Bug#589: New wiki account for Roy Williams
by Roy Williams 31 Aug '14

31 Aug '14

Package: wiki.x2go.org Please create a wiki account for me. First name: Roy Last name: Williams Account name: fang64

2 1

Bug#587: I'll work on this within the next few days
by Michael DePaulo 30 Aug '14

30 Aug '14

Control: tags 587 build-win32 Sorry, I didn't get time to work on this yesterday. I'll work on it within the next few days.

1 0

Bug#302:
by Stefan Baur 30 Aug '14

30 Aug '14

Hi List, we just received a message from Leho Kraav, sadly, Leho's mail setup is broken. While Leho can send mail, messages directed to Leho bounce with the error message "domain has no valid mail exchangers". Therefore, I'm posting this on Leho's behalf, hoping that Leho can somehow read list replies and bugtracker entries. @Leho: Please fix your mail setup! -Stefan Message from Leho Kraav: Mike's last message is lengthy and a bit confusing. I am unable to restore x2go sessions that have been suspended due to network connections on x2goserver-4.0.1.15 / gentoo. Fortunately properly suspended sessions have been restoring well, so that's good, but network disconnections do happen and it would be great to have that working. Is 4.0.1.16 beta or rc planned any time soon? Since the git tree has debian specific stuff, I wonder if some non-debian squashed patch can be generated I could apply to to Gentoo 4.0.1.15 tarball to test the latest fixes for #302?

1 0

Bug#588: X2Go issue (in src:python-x2go) has been marked as pending for release
by Mike Gabriel 29 Aug '14

29 Aug '14

tag #588 pending fixed #588 0.5.0.0 thanks Hello, X2Go issue #588 (src:python-x2go) reported by you has been fixed in X2Go Git. You can see the changelog below, and you can check the diff of the fix at: http://code.x2go.org/gitweb?p=python-x2go.git;a=commitdiff;h=454659b The issue will most likely be fixed in src:python-x2go (0.5.0.0). light+love X2Go Git Admin (on behalf of the sender of this mail) --- commit 454659b3e32bcb9041ee3c29d33b596604aea95a Author: Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Date: Fri Aug 29 21:39:16 2014 +0200 Enforce usage of the "ares" DNS resolver in python-gevent (which is available since Python gevent 1.0~). (Fixes: #588). diff --git a/debian/changelog b/debian/changelog index 5347421..7b742ed 100644 --- a/debian/changelog +++ b/debian/changelog @@ -78,6 +78,8 @@ python-x2go (0.5.0.0-0x2go1) UNRELEASED; urgency=low aware of handling multiple connects on the same tunnel. - Rename LICENSE.txt to COPYING. - Be more exact when detecting the NX proxy window id. + - Enforce usage of the "ares" DNS resolver in python-gevent (which is + available since Python gevent 1.0~). (Fixes: #588). * debian/control: + Add dependencies: python-requests, python-simplejson. * python-x2go.spec:

2 1

← Newer
1
...
4
5
6
7
8
9
10
...
15
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

x2go-dev August 2014