x2go-dev November 2010

x2go-dev@lists.x2go.org

21 participants
27 discussions

x2go client for mac osx
by Ricardo Díaz Martín 14 Nov '12

14 Nov '12

Hi, Is there somebody with x2go client working in MAC OS X Leopard or Snow Leopard? I have try in two different mac box and I always get the same message info "Can't connect to X-Server. Please check your settings". In settings looks like all ok (path to X11.app in mac osx is ok and verify it got right permissions). X-Server in both macs are installed and running. I have try to connect to nomachine linux server and X works fine. Some tips? Regards, Ricardo Díaz

7 8

sound on x2gothinclient
by Philipp Huebner 04 Jul '11

04 Jul '11

Hi, following the manual for Debian Lenny I have set up a x2gothinclient, but I can't get the sound to work. Any hints how to debug this problem? alsa recognizes the soundcard, it is supportet by the running linux kernel. Is it correct that there is not a single pulseaudio package installed inside the chroot? Regards, -- .''`. Philipp Huebner <debalance(a)debian.org> : :' : pgp fp: 6719 25C5 B8CD E74A 5225 3DF9 E5CA 8C49 25E4 205F `. `'` HP: http://www.debalance.de, Skype: philipp-huebner `- ICQ: 235-524-440, Jabber: der_schakal(a)jabber.org

6 6

x2goclient and ssh-agent
by Heiko Baumann 29 Jun '11

29 Jun '11

Hello, is there a way to use x2goclient with ssh-agent(1)? i am using ssh-agent with my etoken to login via nxclient on some machines. is this possible with x2goclient? i've started x2goclient from the same shell where a ssh login to the remote server worked with agent auth. but x2goclient seems not to use the running ssh-agent. thanks for any help. heiko

6 17

Multiserver CUPS patches
by John A. Sullivan III 15 Apr '11

15 Apr '11

Here are the patches to enable a single cups-x2go CUPS server to service multiple X2Go Servers. The documentation was posted previously. Thanks - John

3 11

Shared database patches
by John A. Sullivan III 15 Apr '11

15 Apr '11

Here are the patches for implementing a secure shared database - John

2 2

x2go-home
by Alexander Crössmann 03 Mar '11

03 Mar '11

Hallo, ich bin ein absoluter Neuling hier und hab mir auf Ubuntu 9.10 x2go-home installiert. Leider kann ich mich über den client nicht einloggen. Die Fehlermeldung lautet "The remote proxy closed the connection while negotiating the session. This may be due to the wrong authentication credentials passed to the server.". Ab und zu sehe ich noch das hier " NXPROXY - Version 3.4.0 Copyright (C) 2001, 2007 NoMachine. See http://www.nomachine.com/ for more information. Info: Proxy running in client mode with pid '25163'. Session: Starting session at 'Fri Aug 13 10:29:55 2010'. Info: Connecting to remote host 'localhost:30002'. Info: Connection to remote proxy 'localhost:30002' established. Error: The remote NX proxy closed the connection. Error: Failure negotiating the session in stage '7'. Error: Wrong version or invalid session authentication cookie. Session: Terminating session at 'Fri Aug 13 10:29:56 2010'. Session: Session terminated at 'Fri Aug 13 10:29:56 2010'. NXPROXY - Version 3.4.0 Copyright (C) 2001, 2007 NoMachine. See http://www.nomachine.com/ for more information. Info: Proxy running in client mode with pid '25985'. Session: Starting session at 'Fri Aug 13 10:30:10 2010'. Info: Connecting to remote host 'localhost:30001'. Info: Connection to remote proxy 'localhost:30001' established. " Also host habe ich sowohl 127.0.0.1 als auch localhost probiert. Anmeldename ist mein lokaler Name, der auch in der entsprechenden x2go Gruppe ist. ssh Port ist bei mir nicht 22, das habe ich aber entsprechend eingestellt. Kann mir jemand sagen woran das jetzt noch liegen könnte? Viele Grüße Alex

4 9

X2GO and SSH
by --[ UxBoD ]-- 22 Dec '10

22 Dec '10

Hi, would you have any details on how you compiled OpenSSH for Windows please ? We are experiencing an issue we believe may be due to the age of the distributed SSH client and would like to update it to the latest release. -- Thanks, Phil

4 21

x2go thinclient under Debian Lenny problem with sound
by Markus Homburg 04 Dec '10

04 Dec '10

Hello NG, I have some problems to redirect the sound with arts under Debian Lenny. So what I did was to install die x2goserver-one and the thinclient (PXE,NFS,etc...) and it works so far. That means I can connect to the server and change the windowmanager and the resolution and so on. But there is no sound on the client! When I play a song it will be played on the server not on the client. Which are the correct settings for arts on KDE: Enable networked sound? Select the audio device: Autodetect? Is there a special file to edit? best Markus

4 12

Fwd: Re: X2Goclient
by kamerun＠immerda.ch 26 Nov '10

26 Nov '10

hello, i am back in cameroon and i have to install x2go network with PXE and 10 thin clients. the machine is ubuntu 10.04 and i install x2go home question 1 the installation was going well, but the PXE clients does not start properly. i see that in the file /opt/x2gothinclient/etc/network/run is empty i had the same problem few months before i have done the same correction (see below) and it works i send again the mail and hope this failure will be corrected 2. question to install x2go, because of the slow connection we need here a whole day and we were lucky we had no current problem during this day. for me it would be the best when i make a x2go repository on a usb hard disk and play it from there. somebody know howto do it? warm greetings michel -------- Original Message -------- Subject: Re: [X2go-dev] X2Goclient Date: Sat, 11 Sep 2010 18:36:45 +0200 From: kamerun(a)immerda.ch <kamerun(a)immerda.ch> To: x2go-dev(a)lists.berlios.de, "kamerun(a)immerda.ch" <kamerun(a)immerda.ch> hello, i install x2go server on xen machine http://www.x2go.org/fileadmin/doc/installation_x2go_debian_en.html#3.Instal… pxe come to login but after login he cannot start it says that he cannot connect localhost when i go to console client i cannot ping localhost lo is there but not up i suppose the link in run by client is not done i correct like this and it works, but i suppose it is a mistake or not? x2gonoldapone:~/scripts-noldap-0ne# cd /opt/x2gothinclient/etc/network/ x2gonoldapone:/opt/x2gothinclient/etc/network# ls if-down.d if-post-down.d if-pre-up.d if-up.d interfaces run x2gonoldapone:/opt/x2gothinclient/etc/network# ls run x2gonoldapone:/opt/x2gothinclient/etc/network# ls -l total 24 drwxr-xr-x 2 root root 4096 May 5 2008 if-down.d drwxr-xr-x 2 root root 4096 May 5 2008 if-post-down.d drwxr-xr-x 2 root root 4096 May 5 2008 if-pre-up.d drwxr-xr-x 2 root root 4096 Sep 11 08:33 if-up.d -rw-r--r-- 1 root root 30 Sep 11 08:21 interfaces drwxr-xr-x 2 root root 4096 Sep 11 08:21 run x2gonoldapone:/opt/x2gothinclient/etc/network# rm -r run x2gonoldapone:/opt/x2gothinclient/etc/network# ln -s /dev/shm run x2gonoldapone:/opt/x2gothinclient/etc/network# ls -l total 20 drwxr-xr-x 2 root root 4096 May 5 2008 if-down.d drwxr-xr-x 2 root root 4096 May 5 2008 if-post-down.d drwxr-xr-x 2 root root 4096 May 5 2008 if-pre-up.d drwxr-xr-x 2 root root 4096 Sep 11 08:33 if-up.d -rw-r--r-- 1 root root 30 Sep 11 08:21 interfaces lrwxrwxrwx 1 root root 8 Sep 11 08:54 run -> /dev/shm x2gonoldapone:/opt/x2gothinclient/etc/network# michel

3 2

Python X2Go client GTK?
by Jo-Erlend Schinstad 23 Nov '10

23 Nov '10

I was wondering about that Python X2Go client, if there is a control that can be used to embed the client window (desktop) into a GTK application? If it could be done using PyGTK, then that would be pure heaven. :) Jo-Erlend

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

x2go-dev November 2010