A page in your DokuWiki was added or changed. Here are the details: Browser : Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/135.0.0.0 Safari/537.36 IP Address : 91.89.35.26 Hostname : ip-091-089-035-026.um28.pools.vodafone-ip.de Old Revision : https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1745218477 New Revision : https://wiki.x2go.org/doku.php/doc:howto:tce Date of New Revision: 2025/04/21 07:02 Edit Summary : [What options are available under FURTHER-OPTIONS-GO-HERE?] updated branding info User : stefanbaur There may be newer changes after this revision. If this happens, a message will be shown on the top of the rev page. @@ -1044,8 +1044,11 @@ * ''bg=https|http|ftp://your-http-server-ip-or-dns-here/x2go-tce/x2go-tce-bg.svg'' - use this to specify an SVG file to "brand" your X2Go-TCE with. It will replace the blue background theme of the login screen. See below for how to add this file to your HTTP, HTTPS, or FTP server. **Attention: Whoever manages to spoof the server name can inject rogue images into your ThinClients.** To mitigate this risk, use HTTPS, where the attacker would have to spoof both server name and matching certificate. * ''blank=n|n:n:n'' - Will disable (''blank=0'') or set screensaver timeout. Use ''blank=n:n:n'' to set DPMS Standby/Suspend/Off values. Standby value equals screensaver timeout value. All values are given in seconds. * ''blankdpmsfix'' - This forces the TFT to black for a few seconds during the X startup phase, then forces it back on again. This fixes an occasional "black screen" issue that occurs with some flaky client/TFT hardware combinations when using DisplayPort connectors, and could otherwise only be remediated by manually turning the TFT off and back on again. (feature available via github repo, soon via x2go repo too) * ''branding=https|http|ftp://your-http-server-ip-or-dns-here/x2go-tce/x2go-tce-branding.svg'' - use this to specify an SVG file to "brand" your X2Go-TCE with. It will replace the seal icon in the lower left of the login screen. See below for how to add this file to your HTTP, HTTPS, or FTP server. **Attention: Whoever manages to spoof the server name can inject rogue images into your ThinClients.** To mitigate this risk, use HTTPS, where the attacker would have to spoof both server name and matching certificate. + * The SVG must be in SVG1.1 or SVG1.2 tiny format, or things may break + * Newer versions of X2Go-TCE-Live will check for the strings ''BOOTEDENVPLACEHOLDER'', ''TIMESTAMPPLACEHOLDER'', ''IPPLACEHOLDER'', ''MACPLACEHOLDER'' in the plaintext of the SVG and will try to replace them. (As of 2025-04-21, only available in openbox-microdesktop-bookworm on gitlab.com/bauritcs) + * Newer versions of X2Go-TCE-Live also support ''branding=qrcode'', which will display a QR code containing information regarding the booted environment, version, IP(s) and MAC(s). (As of 2025-04-21, only available in openbox-microdesktop-bookworm on gitlab.com/bauritcs) * ''copysecring'' - this will scan for USB media and fixed disk media (with USB media taking precedence) at boot for one or more of the following directories: ''config/ssh'', 'ssh', ''.ssh''. The volume must be labeled ''X2GO-TCE-LIVE'' or ''PORTABLEAPP'' and may use any supported file system. Any SSH Secret Keys found there will be copied into ''/home/user/.ssh'' (in the ramdisk), with proper permissions and ownerships for the default user account. This may come in handy when you are using SSH Secret Keys on USB media, but need to log in and out of sessions often, and don't want to leave the USB media plugged in all the time/don't want to have to re-insert it before each session startup. **Attention: This poses a security risk when other people are using your ThinClient afterwards (as they will have access to your keys).** To mitigate this risk,be sure to power-cycle the ThinClient once you are done. You //should// specify this parameter when booting X2Go-TCE-Live from portable media when you want to use SSH Secret Keys, to make sure your secret key on the FAT/NTFS partition is available. But as stated above, be sure to power-cycle the machine once you're done. * ''earlyblankdpmsfix'' - This forces the TFT do black for a few seconds during the initial boot phase (right after the squashfs was downloaded), then forces it back on again. This fixes an occasional "black screen" issue that occurs with some flaky client/TFT hardware combinations when using DisplayPort connectors, and could otherwise only be remediated by manually turning the TFT off and back on again. Earlyblankdpmsfix can also be called as ''earlyblankdpmsfix=nnnn'', where ''nnnn'' is the blanking time in milliseconds (so, ''earlyblankdpmsfix=1500'' equals 1.5 seconds). (feature available via github repo, soon via x2go repo too) * ''homepageurl="URL1[|URL2|URLn]"'' - this is only available in MiniDesktop mode. It allows you to specify one or more web pages that show up on Browser start/when clicking the "Home" icon. URLs need to be separated with a ''|'', and the set of URLs needs to be enclosed in double quotes. Do //not// enclose each URL in double quotes separately! Correct example: ''homepageurl="https://www.google.de|https://wiki.x2go.org"'' * ''initrdblankdpmsfix'' is the same as ''earlyblankdpmsfix'', only that it activates in the initial ramdisk already. Like ''earlyblankdpmsfix'', it can also be called as ''initrdblankdpmsfix=nnnn''. This parameter is useful if you are affected by the //black screen at boot// issue, and you are not combining squashfs and initrd into one file when netbooting. (feature available via github repo, soon via x2go repo too) -- This mail was generated by DokuWiki at https://wiki.x2go.org/