A page in your DokuWiki was added or changed. Here are the details: Browser : Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/135.0.0.0 Safari/537.36 IP Address : 91.89.35.26 Hostname : ip-091-089-035-026.um28.pools.vodafone-ip.de Old Revision : https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1745219268 New Revision : https://wiki.x2go.org/doku.php/doc:howto:tce Date of New Revision: 2025/04/21 07:12 Edit Summary : [What options are available under FURTHER-OPTIONS-GO-HERE?] missed two "soon"s User : stefanbaur There may be newer changes after this revision. If this happens, a message will be shown on the top of the rev page. @@ -1042,9 +1042,9 @@ === These are entirely optional === * ''audioout=list'' / ''audioout="alsa_card.something|output:something"'' - use this to list all available audio outputs / select a particular audio output. Note that when selecting one, the parameter consists of two values (as displayed in the output on /dev/tty8 when specifying ''list'') that need to be separated with a ''|'', and the set of the two values needs to be enclosed in double quotes. Do //not// enclose each value in double quotes separately! Correct example: ''audioout="alsa_card.pci-0000_00_1b.0|output:hdmi-stereo"'' * ''bg=https|http|ftp://your-http-server-ip-or-dns-here/x2go-tce/x2go-tce-bg.svg'' - use this to specify an SVG file to "brand" your X2Go-TCE with. It will replace the blue background theme of the login screen. See below for how to add this file to your HTTP, HTTPS, or FTP server. **Attention: Whoever manages to spoof the server name can inject rogue images into your ThinClients.** To mitigate this risk, use HTTPS, where the attacker would have to spoof both server name and matching certificate. * ''blank=n|n:n:n'' - Will disable (''blank=0'') or set screensaver timeout. Use ''blank=n:n:n'' to set DPMS Standby/Suspend/Off values. Standby value equals screensaver timeout value. All values are given in seconds. - * ''blankdpmsfix'' - This forces the TFT to black for a few seconds during the X startup phase, then forces it back on again. This fixes an occasional "black screen" issue that occurs with some flaky client/TFT hardware combinations when using DisplayPort connectors, and could otherwise only be remediated by manually turning the TFT off and back on again. (feature available via github repo, soon via x2go repo too) + * ''blankdpmsfix'' - This forces the TFT to black for a few seconds during the X startup phase, then forces it back on again. This fixes an occasional "black screen" issue that occurs with some flaky client/TFT hardware combinations when using DisplayPort connectors, and could otherwise only be remediated by manually turning the TFT off and back on again. * ''branding=https|http|ftp://your-http-server-ip-or-dns-here/x2go-tce/x2go-tce-branding.svg'' - use this to specify an SVG file to "brand" your X2Go-TCE with. It will replace the seal icon in the lower left of the login screen. See below for how to add this file to your HTTP, HTTPS, or FTP server. **Attention: Whoever manages to spoof the server name can inject rogue images into your ThinClients.** To mitigate this risk, use HTTPS, where the attacker would have to spoof both server name and matching certificate. * The SVG must be in SVG1.1 or SVG1.2 tiny format, or things may break * Newer versions of X2Go-TCE-Live will check for the strings ''BOOTEDENVPLACEHOLDER'', ''TIMESTAMPPLACEHOLDER'', ''IPPLACEHOLDER'', ''MACPLACEHOLDER'' in the plaintext of the SVG and will try to replace them. (As of 2025-04-21, only available in openbox-microdesktop-bookworm on gitlab.com/bauritcs) * Newer versions of X2Go-TCE-Live also support ''branding=qrcode'', which will display a QR code containing information regarding the booted environment, version, IP(s) and MAC(s). (As of 2025-04-21, only available in openbox-microdesktop-bookworm on gitlab.com/bauritcs) @@ -1067,9 +1067,9 @@ * ''throttle=n|n:n:n:n:n'' - Will throttle down- and upload speed (''throttle=n'') or set throttling limits as follows: download:upload:smoothingtime:smoothinglength:latency. Defaults for up- and download are 10 (KiloBytes/s), 3.0 (seconds, using decimals is permitted) smoothingtime, 20 (KiloBytes), 0 (ms). for a detailed description of these parameters, see "man trickle". You can use the first 1, 2, 3, 4 or all 5 parameters. To set down- and/or upload speed to unlimited, use the letter "u" instead of a numeric value. * ''timezone=TIMEZONE'' - can be used to define a timezone other than UTC, e.g. 'Europe/Berlin'. This especially makes sense for MATE-MiniDesktop, but is nice to have in regular TCE-Live as well, because the timestamp of the log messages will show the local time instead of UTC. This is a standard parameter of live-boot, and not specific to X2Go. * ''windowwidth=[n-nnn]'' - this is only available in MiniDesktop mode. It allows you to set the width of the X2GoClient login window (which gets moved and resized to the right side of your screen during session startup) to any value between 0 and 100. Note that widths smaller than 30 are not recommended and may cause further resizing once the session starts. * ''x3270servers="host[:port][|host[:port]...]"'' - this is only available in MiniDesktop mode. It allows you to specify one or more hosts (with optional ports) for x3270 terminal emulation sessions that will be created as desktop shortcuts on the thinclient. For a default 3270 connection, the port is 23 (telnet) and does not need to be specified. For an SSL-encrypted connection (recommended), the port is 992. Hosts may be IP addresses or DNS names, and need to be separated with a ''|''. - * ''x5250servers="host[:port][|host[:port]...]"'' - this is only available in MiniDesktop mode. It allows you to specify one or more hosts (with optional ports) for x5250 terminal emulation sessions that will be created as desktop shortcuts on the thinclient. For a default 5250 connection, the port is 23 (telnet) and does not need to be specified. For an SSL-encrypted connection (recommended), the port is 992. Hosts may be IP addresses or DNS names, and need to be separated with a ''|''. Note that x5250 support is currently not part of the standard image available via git, as there is no x5250 executable in Debian. You can try using x3270 instead, most modern IBM i (System i, iSeries, AS/400) systems support 3270-type connections as well. If you need native 5250 support, say, with a commercial, closed-source 5250 terminal emulator, please leave a message on the X2Go-User Mailing List and we'll tell you if and how you can integrate that into your build. (feature available via github repo, soon via x2go repo too) + * ''x5250servers="host[:port][|host[:port]...]"'' - this is only available in MiniDesktop mode. It allows you to specify one or more hosts (with optional ports) for x5250 terminal emulation sessions that will be created as desktop shortcuts on the thinclient. For a default 5250 connection, the port is 23 (telnet) and does not need to be specified. For an SSL-encrypted connection (recommended), the port is 992. Hosts may be IP addresses or DNS names, and need to be separated with a ''|''. Note that x5250 support is currently not part of the standard image available via git, as there is no x5250 executable in Debian. You can try using x3270 instead, most modern IBM i (System i, iSeries, AS/400) systems support 3270-type connections as well. If you need native 5250 support, say, with a commercial, closed-source 5250 terminal emulator, please leave a message on the X2Go-User Mailing List and we'll tell you if and how you can integrate that into your build. * ''xinerama=left-of|right-of|above|below|same-as'' - Allows you to specify how multiple screens are handled (same-as clones the primary screen to all secondary screens, the other commands will cascade and thus expand the screen). Note that the current implementation will enforce "same-as" if it detects a touch screen driver (wacom) and no other pointing device. This is so you won't get stuck being unable to log off, for example, due to your touch device being limited to one screen. * ''xorg-driver=DRIVERNAME'' - will skip graphics driver autodetection and force the specified driver instead. This is a standard parameter of live-boot, and not specific to X2Go. * ''xorg-resolution=HRESxVRES'' - will force the horizontal resolution to HRES and the vertical resolution to VRES, e.g. ''xorg-resolution=1280x1024'', useful if autodetection for the correct screen size fails, but you do get as far as seeing the X2Go GUI. This is a standard parameter of live-boot, and not specific to X2Go. * ''xorgconfurl=tftp|http|https|ftp://your-http-server-ip-or-dns-here/x2go-tce/x2go-tce.xorg.conf'' - when a client outright refuses to boot into the graphical X2Go login screen, but gets stuck at the console or a black screen instead, yet you can get the GUI to work using a regular Linux on the same hardware, you can disable the X Server's autodetection and force it to use the xorg.conf specified here. Note that you should use a more descriptive name for the file, as described below. **Attention: Whoever manages to spoof the server name can inject rogue xorg config files into your ThinClients.** To mitigate this risk, use HTTPS, where the attacker would have to spoof both server name and matching certificate. -- This mail was generated by DokuWiki at https://wiki.x2go.org/