A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/15 03:58 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481773995 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [Final Steps to boot a ThinClient] User : stefanbaur @@ -242,5 +242,5 @@ * Determine the MAC address of your ThinClient. In the following example, we will assume it is ''AA-BB-CC-DD-EE-FF''. * create a symlink with the name ''01-AA-BB-CC-DD-EE-FF'' (note the extra "01-" at the beginning) pointing to x2go-tce-whatever-name-you-chose. * After that, your ThinClient should boot the X2Go-TCE image. * Note that it is possible to use partial matching, so a symlink starting with "01-AA-BB-CC" would match all ThinClients with a MAC address starting with "AA-BB-CC" and so on. - * For further matching options (IP-based, for example), please consult the pxeboot documentation. + * For further matching options (IP-based, for example), please consult the pxeboot documentation. In short, it should be possible (i.e. untested by us), but it a) requires you to assign static DHCP IPs and b) you need to translate the IP to its hexadecimal value and use that value as the symlink name, so e.g. 192.168.0.1 becomes C0A80001 -> x2go-tce. -- This mail was generated by DokuWiki at http://wiki.x2go.org/