A page in your DokuWiki was added or changed. Here are the details: Browser : Mozilla/5.0 (X11; Linux x86_64; rv:115.0) Gecko/20100101 Goanna/6.7 Firefox/115.0 PaleMoon/33.7.0 IP Address : 91.89.35.26 Hostname : ip-091-089-035-026.um28.pools.vodafone-ip.de Old Revision : https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1746127251 New Revision : https://wiki.x2go.org/doku.php/doc:howto:tce Date of New Revision: 2025/05/01 19:22 Edit Summary : [What options are available under FURTHER-OPTIONS-GO-HERE?] updated timestamp on allowedapps/autostartapps entries User : stefanbaur There may be newer changes after this revision. If this happens, a message will be shown on the top of the rev page. @@ -1073,11 +1073,11 @@ * ''broker-url=ssh:<nowiki>//</nowiki>your-broker-address-here'' - this allows you to specify an X2Go Session Broker instead of a sessions file (not limited to an ssh-based broker, works with an http-based broker as well) * ''sessionsurl=https|http|ftp://your-http-server-ip-or-dns-here/x2go-tce/x2go-tce.sessions'' - use this to specify a sessions file. You need this unless you are using a session broker. See below for how to add this file to your HTTP, HTTPS, or FTP server. **Attention: Whoever manages to spoof the server name can inject rogue session config files into your ThinClients.** To mitigate this risk, use HTTPS, where the attacker would have to spoof both server name and matching certificate. === These are entirely optional === - * ''allowedapps=app1[,app2[,app3[,...,appn]'' - a comma-separated list of applications that should be shown in the start button menu and on the task bar. Obviously, these apps need to be included in the image - apps that are not installed will be skipped. If this parameter isn't specified, it will default to ''x2goclient,firefox,firefox-esr,debian-uxterm''. Other apps you might want to add to the list are: ''chromium,debian-xterm,x5250,x3270''. Note that in case of x3270 and x5250, all sessions listed in the ''x3270servers=''/''x5250servers='' parameters will be added to the start menu and task bar. (As of 2025-04-21, only available in openbox-microdesktop-bookworm on gitlab.com/bauritcs) + * ''allowedapps=app1[,app2[,app3[,...,appn]'' - a comma-separated list of applications that should be shown in the start button menu and on the task bar. Obviously, these apps need to be included in the image - apps that are not installed will be skipped. If this parameter isn't specified, it will default to ''x2goclient,firefox,firefox-esr,debian-uxterm''. Other apps you might want to add to the list are: ''chromium,debian-xterm,x5250,x3270''. Note that in case of x3270 and x5250, all sessions listed in the ''x3270servers=''/''x5250servers='' parameters will be added to the start menu and task bar. (As of 2025-05-01, only available in openbox-microdesktop-bookworm on gitlab.com/bauritcs) * ''audioout=list'' / ''audioout="alsa_card.something|output:something"'' - use this to list all available audio outputs / select a particular audio output. Note that when selecting one, the parameter consists of two values (as displayed in the output on /dev/tty8 when specifying ''list'') that need to be separated with a ''|'', and the set of the two values needs to be enclosed in double quotes. Do //not// enclose each value in double quotes separately! Correct example: ''audioout="alsa_card.pci-0000_00_1b.0|output:hdmi-stereo"'' - * ''autostartapps=app1[,app2[,app3[,...,appn]'' - a comma-separated list of applications that should be shown in the start button menu and on the task bar. Obviously, these apps need to be included in the image - apps that are not installed will be skipped. If this parameter isn't specified, it will default to an empty string - note that X2GoClient will be started automatically anyway. Other apps you might want to add to the list are: ''chromium,debian-xterm,x5250,x3270''. Note that in case of x3270 and x5250, all sessions listed in the ''x3270servers=''/''x5250servers='' parameters will be autostarted. If the ''x3270servers=''/''x5250servers='' parameter is left empty, x3270/x5250 will start in offline mode with no sessions configured. (As of 2025-04-21, only available in openbox-microdesktop-bookworm on gitlab.com/bauritcs) + * ''autostartapps=app1[,app2[,app3[,...,appn]'' - a comma-separated list of applications that should be shown in the start button menu and on the task bar. Obviously, these apps need to be included in the image - apps that are not installed will be skipped. If this parameter isn't specified, it will default to an empty string - note that X2GoClient will be started automatically anyway. Other apps you might want to add to the list are: ''chromium,debian-xterm,x5250,x3270''. Note that in case of x3270 and x5250, all sessions listed in the ''x3270servers=''/''x5250servers='' parameters will be autostarted. If the ''x3270servers=''/''x5250servers='' parameter is left empty, x3270/x5250 will start in offline mode with no sessions configured. (As of 2025-05-01, only available in openbox-microdesktop-bookworm on gitlab.com/bauritcs) * ''bg=https|http|ftp://your-http-server-ip-or-dns-here/x2go-tce/x2go-tce-bg.svg'' - use this to specify an SVG file to "brand" your X2Go-TCE with. It will replace the blue background theme of the login screen. See below for how to add this file to your HTTP, HTTPS, or FTP server. **Attention: Whoever manages to spoof the server name can inject rogue images into your ThinClients.** To mitigate this risk, use HTTPS, where the attacker would have to spoof both server name and matching certificate. * ''blank=n|n:n:n'' - Will disable (''blank=0'') or set screensaver timeout. Use ''blank=n:n:n'' to set DPMS Standby/Suspend/Off values. Standby value equals screensaver timeout value. All values are given in seconds. * ''blankdpmsfix'' - This forces the TFT to black for a few seconds during the X startup phase, then forces it back on again. This fixes an occasional "black screen" issue that occurs with some flaky client/TFT hardware combinations when using DisplayPort connectors, and could otherwise only be remediated by manually turning the TFT off and back on again. * ''branding=https|http|ftp://your-http-server-ip-or-dns-here/x2go-tce/x2go-tce-branding.svg'' - use this to specify an SVG file to "brand" your X2Go-TCE with. It will replace the seal icon in the lower left of the login screen. See below for how to add this file to your HTTP, HTTPS, or FTP server. **Attention: Whoever manages to spoof the server name can inject rogue images into your ThinClients.** To mitigate this risk, use HTTPS, where the attacker would have to spoof both server name and matching certificate. -- This mail was generated by DokuWiki at https://wiki.x2go.org/