A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/15 13:02 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481806823 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: User : stefanbaur @@ -235,8 +235,10 @@ * After that, your ThinClient should boot the X2Go-TCE image. * Note that it is possible to use partial matching, so a symlink starting with "01-AA-BB-CC" would match all ThinClients with a MAC address starting with "AA-BB-CC" and so on. * For further matching options (IP-based, for example), please consult the pxeboot documentation. In short, it should be possible (i.e. untested by us), but it a) requires you to assign static DHCP IPs and b) you need to translate the IP to its hexadecimal value and use that value as the symlink name, so e.g. 192.168.0.1 becomes C0A80001 -> x2go-tce. + -------------------------------------------------------- + ===== List of open ToDos/FIXMEs for this page ===== FIXME This page is missing a section/subpage that explains how to use the content of the tar file located in the build directory **if no PXE/TFTP/HTTP server is present** yet. Basically, debian-live/live/filesystem.squashfs becomes (webroot)/x2go-tce/x2go-tce-filesystem.squashfs and everything from tftpboot/ goes into the TFTP root directory. After that, one should proceed as described above regarding creation of files and symlinks. -- This mail was generated by DokuWiki at http://wiki.x2go.org/