A page in your DokuWiki was added or changed. Here are the details: Browser : Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/135.0.0.0 Safari/537.36 IP Address : 91.89.35.26 Hostname : ip-091-089-035-026.um28.pools.vodafone-ip.de Old Revision : https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1745215852 New Revision : https://wiki.x2go.org/doku.php/doc:howto:tce Date of New Revision: 2025/04/21 06:11 Edit Summary : [Build system prerequisites for all variants] added rsync User : stefanbaur There may be newer changes after this revision. If this happens, a message will be shown on the top of the rev page. @@ -29,9 +29,9 @@ * You need a Debian Bookworm system to build the image. (Other distributions based on Debian might work, but this is untested and may fail. E.g. if you try to build Bookworm images on Bullseye, you can only create netboot images, but no isos.) * We suggest using a 64-Bit system, however, it is possible to use a 32-Bit system if you don't want to build a 64-Bit ThinClient image. * We suggest leaving at least 4 GB of free disk space so the build won't abort due to insufficient disk space while packages are downloaded, unpacked and copied around. * Make sure your package list is up to date by running: <code>sudo apt update </code> - * Install the required package(s) by running: <code>sudo apt install genisoimage git-core live-build live-config-doc live-manual-html live-boot-doc lsb-release netcat-traditional</code> + * Install the required package(s) by running: <code>sudo apt install genisoimage git-core live-build live-config-doc live-manual-html live-boot-doc lsb-release netcat-traditional rsync</code> * If you want to speed up subsequent builds, install the recommended package(s) by running: <code>sudo apt install apt-cacher-ng</code> * If you want to be able to cross-build across different architectures (e.g. building an ARM image on an Intel/AMD build host), install the optional package(s) by running: <code>sudo apt install qemu-user-static binfmt-support squashfs-tools -y && update-binfmts --enable qemu-aarch64</code> ===== Building your own X2Go-TCE Image ===== -- This mail was generated by DokuWiki at https://wiki.x2go.org/