A page in your DokuWiki was added or changed. Here are the details: Browser : Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/135.0.0.0 Safari/537.36 IP Address : 91.89.35.26 Hostname : ip-091-089-035-026.um28.pools.vodafone-ip.de Old Revision : https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1745142262 New Revision : https://wiki.x2go.org/doku.php/doc:howto:tce Date of New Revision: 2025/04/21 06:10 Edit Summary : [Build system prerequisites for all variants] Buster-> Bookworm User : stefanbaur There may be newer changes after this revision. If this happens, a message will be shown on the top of the rev page. @@ -25,9 +25,9 @@ * At least an i586-compatible CPU * Capability to boot via PXE //or// sufficient local storage (expect 250-450 MB, depending on what you decide to include) * A graphics card and input devices (Keyboard, Mouse/Trackball/Touchpad/Trackpoint/Touchscreen, ...) that are supported by the stock Debian X Server ===== Build system prerequisites for all variants ===== - * You need a Debian Buster system to build the image. (Other distributions based on Debian might work, but this is untested.) + * You need a Debian Bookworm system to build the image. (Other distributions based on Debian might work, but this is untested and may fail. E.g. if you try to build Bookworm images on Bullseye, you can only create netboot images, but no isos.) * We suggest using a 64-Bit system, however, it is possible to use a 32-Bit system if you don't want to build a 64-Bit ThinClient image. * We suggest leaving at least 4 GB of free disk space so the build won't abort due to insufficient disk space while packages are downloaded, unpacked and copied around. * Make sure your package list is up to date by running: <code>sudo apt update </code> * Install the required package(s) by running: <code>sudo apt install genisoimage git-core live-build live-config-doc live-manual-html live-boot-doc lsb-release netcat-traditional</code> -- This mail was generated by DokuWiki at https://wiki.x2go.org/