x2go-commits

x2go-commits@lists.x2go.org

37910 discussions

[[X2Go Wiki]] page changed: wiki:advanced:tce:tested-hardware
by wiki-admin＠x2go.org 12 Feb '18

12 Feb '18

A page in your DokuWiki was added or changed. Here are the details: Date : 2018/02/12 15:26 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.7.2 IP-Address : 134.3.37.90 Hostname : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/wiki:advanced:tce:tested-hardware?rev=151844… New Revision: https://wiki.x2go.org/doku.php/wiki:advanced:tce:tested-hardware Edit Summary: Added table listing date of test User : stefanbaur @@ -3,6 +3,6 @@ ^ Hardware ^ Features ^ Comment ^ Price ^ - | [[https://www.thomas-krenn.com/de/produkte/low-energy-systeme/les/les-v3.html| Thomas-Krenn LESv3 ]] | Intel Celeron N3160 , 4 Core, 1.6 - 2.24GHz, Dual-HDMI-out, Single DisplayPort-Out, Analog Audio out, Dual Gigabit Ethernet, several USB3 ports, RS232 Serial Port, fanless, diskless by default (but allows internal SSD mounts). | Requires Debian-Stretch-based TCE - will not work smoothly with Jessie or older (gfx hardware too new to be fully supported by Jessie and older). No problems with Stretch. When using HDMI out, you need to specify ''audioout=list'' and pick the proper boot parameter value from the console output on /dev/tty8 if you want to use sound via HDMI - the default is the analog audio jack. When using DisplayPort, depending on the screen used, you may need to specify boot parameters ''earlyblankdpmsfix'' or ''blankdpmsfix''. This issue is not the LESv3's fault, but a general issue some screens have when using DisplayPort - HDMI is unaffected. According to the manufacturer, it is possible to run this client with three screens if you attach a DisplayPort-VGA-Converter to the DisplayPort output. Lacking such an adapter ourselves, we did not test this functionality. We did test single-screen DisplayPort and single- as well as dual-screen HDMI. | ~250 + Tax including ram, power supply, casing, but without optional SSD | + | [[https://www.thomas-krenn.com/de/produkte/low-energy-systeme/les/les-v3.html| Thomas-Krenn LESv3 ]] | Intel Celeron N3160 , 4 Core, 1.6 - 2.24GHz, Dual-HDMI-out, Single DisplayPort-Out, Analog Audio out, Dual Gigabit Ethernet, several USB3 ports, RS232 Serial Port, fanless, diskless by default (but allows internal SSD mounts). | Requires Debian-Stretch-based TCE - will not work smoothly with Jessie or older (gfx hardware too new to be fully supported by Jessie and older). No problems with Stretch. When using HDMI out, you need to specify ''audioout=list'' and pick the proper boot parameter value from the console output on /dev/tty8 if you want to use sound via HDMI - the default is the analog audio jack. When using DisplayPort, depending on the screen used, you may need to specify boot parameters ''earlyblankdpmsfix'' or ''blankdpmsfix''. This issue is not the LESv3's fault, but a general issue some screens have when using DisplayPort - HDMI is unaffected. According to the manufacturer, it is possible to run this client with three screens if you attach a DisplayPort-VGA-Converter to the DisplayPort output. Lacking such an adapter ourselves, we did not test this functionality. We did test single-screen DisplayPort and single- as well as dual-screen HDMI. | ~250 + Tax including ram, power supply, casing, but without optional SSD | | [[http://www.intel.com/products/desktop/motherboards/d945gsejt/d945gsejt-over… D945GSEJT]] | + Fanless \\ - No Dual-Link DVI | Didn't work: x2Go was not able to connect the server and crashed a lot (unstable version?). Used Ubuntu & live-build (morty) | [[http://www.cartft.com/catalog/il/1085| ~200€]] including ram, power supply, casing | | [[http://www.rangee.de/site/de/thinclient/thinclient_uebersicht_864.html| Rangee LT360]] | + Fanless \\ + DVI + VGA \\ - No cardreader| Works fine on about 50 stations - more than 512 MB Ram recommended. Dual monitor not tested. Used Debian custom-build (h1) | [[http://www.rangee.de/site/de/thinclient/thinclient_uebersicht/864.html| ~260€]] including ram, power supply, casing | | [[http://www.zotac.com/index.php?option=com_virtuemart&Itemid=100265&lang=de&… FUSION350]] | + Fanless \\ +Displayport (2560 x 1440) \\ - No cardreader| Works fanless in a very airy case, a fan might be a good idea in summer | ~260 including ram, power supply, casing | | [[http://www.fit-pc.com/web/fit-pc/fit-pc3-info/ | fit-PC3 Pro ]] | + Fanless \\ +Displayport (2560 x 1440) \\ - No cardreader | Only the Pro-version supports displays > 1920 x 1200 | > 400€ | @@ -12,5 +12,19 @@ | [[http://www.zotacusa.com/zbox-sd-id12.html | Zotac Zbox ID12 ]] | + No Fanless \\ + DVI + VGA \\ - Cardreader \\ + Wlan | Needs modeset enabled on TCE (1) \\ DVI port is cripped to 1280x720 by hardware | ~ 150€ | | [[http://www.zotac.com/products/mini-pcs/zbox/nvidia/product/nvidia/detail/zb… | Zotac Zbox ID18 ]] | + No Fanless \\ + DVI + HDMI \\ - Cardreader | | ~ 125€ | (1) delete "nomodeset" on /srv/tftp/x2go-tce.cfg + + + FIXME: This table should be merged into the upper one, and the entries sorted by test date, followed by hardware name. + ^ Hardware ^ Test date ^ + | Thomas-Krenn LESv3 | Tested on 2018-02-12 | + | Zotac Zbox ID18 | Tested on 2014-03-17 | + | Foxconn NT-i2847 | Tested on 2014-01-30 | + | MSI DC100 WE450 | Tested on 2014-01-30 | + | Shuttle XS35V2 | Tested on 2014-01-30 | + | Zotac Zbox ID12 | Tested on 2014-01-30 | + | Zotac Fusion | Tested on 2011-12-20 | + | Rangee LT360 | Tested on 2011-08-18 | + | Fit-PC3-Pro | Tested on 2012-07-26 | + | Intel D945GSEJT | Tested on 2011-07-11 | -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: wiki:advanced:tce:tested-hardware
by wiki-admin＠x2go.org 12 Feb '18

12 Feb '18

A page in your DokuWiki was added or changed. Here are the details: Date : 2018/02/12 15:21 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.7.2 IP-Address : 134.3.37.90 Hostname : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/wiki:advanced:tce:tested-hardware?rev=139506… New Revision: https://wiki.x2go.org/doku.php/wiki:advanced:tce:tested-hardware Edit Summary: added Thomas-Krenn LESv3 User : stefanbaur @@ -3,5 +3,6 @@ ^ Hardware ^ Features ^ Comment ^ Price ^ + | [[https://www.thomas-krenn.com/de/produkte/low-energy-systeme/les/les-v3.html| Thomas-Krenn LESv3 ]] | Intel Celeron N3160 , 4 Core, 1.6 - 2.24GHz, Dual-HDMI-out, Single DisplayPort-Out, Analog Audio out, Dual Gigabit Ethernet, several USB3 ports, RS232 Serial Port, fanless, diskless by default (but allows internal SSD mounts). | Requires Debian-Stretch-based TCE - will not work smoothly with Jessie or older (gfx hardware too new to be fully supported by Jessie and older). No problems with Stretch. When using HDMI out, you need to specify ''audioout=list'' and pick the proper boot parameter value from the console output on /dev/tty8 if you want to use sound via HDMI - the default is the analog audio jack. When using DisplayPort, depending on the screen used, you may need to specify boot parameters ''earlyblankdpmsfix'' or ''blankdpmsfix''. This issue is not the LESv3's fault, but a general issue some screens have when using DisplayPort - HDMI is unaffected. According to the manufacturer, it is possible to run this client with three screens if you attach a DisplayPort-VGA-Converter to the DisplayPort output. Lacking such an adapter ourselves, we did not test this functionality. We did test single-screen DisplayPort and single- as well as dual-screen HDMI. | ~250 + Tax including ram, power supply, casing, but without optional SSD | | [[http://www.intel.com/products/desktop/motherboards/d945gsejt/d945gsejt-over… D945GSEJT]] | + Fanless \\ - No Dual-Link DVI | Didn't work: x2Go was not able to connect the server and crashed a lot (unstable version?). Used Ubuntu & live-build (morty) | [[http://www.cartft.com/catalog/il/1085| ~200€]] including ram, power supply, casing | | [[http://www.rangee.de/site/de/thinclient/thinclient_uebersicht_864.html| Rangee LT360]] | + Fanless \\ + DVI + VGA \\ - No cardreader| Works fine on about 50 stations - more than 512 MB Ram recommended. Dual monitor not tested. Used Debian custom-build (h1) | [[http://www.rangee.de/site/de/thinclient/thinclient_uebersicht/864.html| ~260€]] including ram, power supply, casing | | [[http://www.zotac.com/index.php?option=com_virtuemart&Itemid=100265&lang=de&… FUSION350]] | + Fanless \\ +Displayport (2560 x 1440) \\ - No cardreader| Works fanless in a very airy case, a fan might be a good idea in summer | ~260 including ram, power supply, casing | | [[http://www.fit-pc.com/web/fit-pc/fit-pc3-info/ | fit-PC3 Pro ]] | + Fanless \\ +Displayport (2560 x 1440) \\ - No cardreader | Only the Pro-version supports displays > 1920 x 1200 | > 400€ | -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 12 Feb '18

12 Feb '18

A page in your DokuWiki was added or changed. Here are the details: Date : 2018/02/12 14:58 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.7.2 IP-Address : 134.3.37.90 Hostname : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1518447424 New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [List of open ToDos/FIXMEs for this page] User : stefanbaur @@ -1150,9 +1150,9 @@ * Situation: We have a working automounter, and ''copysecring'' will copy all keys found to the live-user's homedir under .ssh: * If a session is set to "Try auto login (via SSH Agent or default SSH key)" and NO keyfile is set, then X2GoClient will try **all** secret keys in .ssh. Showing a password prompt if a key is password-protected is handled by X2GoClient, so needs no extra work. * To specify a keyfile, either: * use ''~/.ssh/keyfilename'' as path and use ''copysecring'', or - * do not use ''copysecring'' and use ''/media/vendor_model_name/sdxn/path/to/keyfile'' as keyfile path/name + * do not use ''copysecring'' and use ''/media/vendor_model_name/sdxn/path/to/keyfile'' (or ''/media/vendor_model_name/partlabel/path/to/keyfile'', if you assigned a partition label - which is recommended for this use case) as keyfile path/name FIXME copying ssh private keys seems to fail in MiniDesktop-Mode - possibly because of the priming/pruning/cleanup action performed on the homedirectory by the minidesktop init scripts? FIXME ''2200-xserver-xorg-getxorgconf'' should be taught to understand ''file:<nowiki>//</nowiki>'' URLs. -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 12 Feb '18

12 Feb '18

A page in your DokuWiki was added or changed. Here are the details: Date : 2018/02/12 14:57 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.7.2 IP-Address : 134.3.37.90 Hostname : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1518447267 New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [List of open ToDos/FIXMEs for this page] - closed homepageurl fixme, fixed some minor style issues User : stefanbaur @@ -1154,9 +1154,9 @@ * do not use ''copysecring'' and use ''/media/vendor_model_name/sdxn/path/to/keyfile'' as keyfile path/name FIXME copying ssh private keys seems to fail in MiniDesktop-Mode - possibly because of the priming/pruning/cleanup action performed on the homedirectory by the minidesktop init scripts? - FIXME 2200-xserver-xorg-getxorgconf should be taught to understand file:<nowiki>//</nowiki> URLs. + FIXME ''2200-xserver-xorg-getxorgconf'' should be taught to understand ''file:<nowiki>//</nowiki>'' URLs. FIXME Parsing the output of e.g. <code>udevadm info --query path /dev/sdb /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host2/target2:0:0/2:0:0:0/block/sdb cat /sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/serial</code> allows to determine the serial number of a USB device. Those SHOULD be unique, but sadly, they aren't (and sometimes, they are missing entirely). Therefore, a USB serial number can't be used for authentication, but it could be used for "weak" identification - so it could be used to set a default user name or a default session, or to download a particular sessions file. @@ -1171,21 +1171,21 @@ FIXME ''x2gocdmanager'' is currently not part of the image, but should become part of it. While optical media are on their way out, they still exist and thus we should support them. However, the script is hardcoded for X2Go-TCE-NFS and needs to be adapted to work with both TCEs. FIXME ''pinentry-x2go'' and ''x2gosmartcardrules'' probably need further investigation to make smartcard authentication work. - FIXME Even though we set the hostname to localhost using the corresponding boot parameter, as recommended by Debian, changing the name via DHCP does not work for all image flavours. One way to fix this might be http://blog.schlomo.schapiro.org/2013/11/setting-hostname-from-dhcp-in-debi… + FIXME Even though we set the hostname to ''localhost'' using the corresponding boot parameter, as recommended by Debian, changing the name via DHCP does not work for all image flavours. One way to fix this might be http://blog.schlomo.schapiro.org/2013/11/setting-hostname-from-dhcp-in-debi… FIXME At least when building a stretch TCE on a jessie system, you need to add kernel parameters ''net.ifnames=0 biosdevname=0'' to the image's kernel parameters, else you will receive error messages about the hostname script being unable to find eth0. This might not be necessary when building a stretch TCE on stretch. For a jessie TCE on jessie, it is not required. FIXME <del>There might be a race condition between the scripts handling the sshd keyfile and the ssh private key file copy task (/config ...), causing one to umount the fixed disk before the other is done reading/copying. What's weird is that there already is code that is supposed to keep this from happening, but it doesn't.</del> fixed in github repo, soon in x2go repo FIXME <del>Setting the time via NTP will fail if the TC can't establish a connection to an NTP server via the internet. It would make sense to allow specifying an internal NTP server via a boot parameter.</del> fixed in github repo, soon in x2go repo - FIXME <del>copysecring currently does not work in MiniDesktop-Mode, as it copies the keys to the wrong user's homedir.</del> fixed in github repo, soon in x2go repo + FIXME <del>''copysecring'' currently does not work in MiniDesktop-Mode, as it copies the keys to the wrong user's homedir.</del> fixed in github repo, soon in x2go repo FIXME ''audioout='', ''blank='', ''blankdpmsfix'', ''broker-url='', ''ldap='', ''ldap1='', ''ldap2='', ''nodpms'', ''session='', ''throttle='', ''xinerama='', are currently unsupported in MiniDesktop-Mode. This could be changed, given enough tuits. Probably the easiest way would be to outsource as many of them as possible into scripts under ''/etc/X11/Xsession.d/'' (currently, they reside in ''/lib/live/config/2900-x2go-thinclientconfig'' - which doesn't exist in the MiniDesktop branches - and from there, they get written to ''~/.xsession'' - FIXME nomagicpixel= is currently unsupported in MiniDesktop-Mode and probably will be unsupported there forever, as it doesn't make sense for MiniDesktop-Mode. + FIXME ''nomagicpixel='' is currently unsupported in MiniDesktop-Mode and probably will be unsupported there forever, as it doesn't make sense for MiniDesktop-Mode. - FIXME bg= and branding= are currently unsupported in MiniDesktop-Mode. Adding support for these doesn't need many tuits. A third option for the desktop background could be added as well - possibly for regular TCE mode as well, overriding our default blue. + FIXME ''bg='' and ''branding='' are currently unsupported in MiniDesktop-Mode. Adding support for these doesn't need many tuits. A third option for the desktop background could be added as well - possibly for regular TCE mode as well, overriding our default blue. - FIXME homepageurl= (only available in MiniDesktop-Mode) is currently undocumented. Supports multiple URLs separated with pipes. + FIXME <del>''homepageurl='' (only available in MiniDesktop-Mode) is currently undocumented. Supports multiple URLs separated with pipes.</del> -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[x2gobroker] branch master updated (ca8e8bd -> 75bc19e)
by git-admin＠x2go.org 12 Feb '18

12 Feb '18

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch master in repository x2gobroker. from ca8e8bd debian/changelog: merge in changes from release/0.0.3.x branch. new 0f1e50d debian/x2gobroker-ssh.prerm: Replace header (was: postrm API, now: prerm API). new 358ba52 x2gobroker/basicauth.py: Fix call of base64.decodestring on Python3. new 134ecd6 unit tests: Fix deep misunderstanding in the way allow-deny vs. deny-allow should actually work. new 75bc19e x2gobroker/brokers/base_broker.py: Entire rewrite of check_profile_acls() method. (Fixes: #1234). The 4 revisions listed above as "new" are entirely new to this repository and will be described in separate emails. The revisions listed as "adds" were already present in the repository and have only been added to this reference. Summary of changes: debian/changelog | 5 + debian/x2gobroker-ssh.prerm | 19 ++- x2gobroker/basicauth.py | 2 +- x2gobroker/brokers/base_broker.py | 48 +++---- x2gobroker/tests/test_broker_base.py | 213 ++++++++++++++++++++++++-------- x2gobroker/tests/test_broker_inifile.py | 8 +- 6 files changed, 198 insertions(+), 97 deletions(-) -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/x2gobroker.git

1 4

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 12 Feb '18

12 Feb '18

A page in your DokuWiki was added or changed. Here are the details: Date : 2018/02/12 14:54 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.7.2 IP-Address : 134.3.37.90 Hostname : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1518446908 New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [What options are available under FURTHER-OPTIONS-GO-HERE?] - added homepageurl description User : stefanbaur @@ -882,8 +882,9 @@ * ''blankdpmsfix'' - This forces the TFT do black for a few seconds during the X startup phase, then forces it back on again. This fixes an occasional "black screen" issue that occurs with some flaky client/TFT hardware combinations when using DisplayPort connectors, and could otherwise only be remediated by manually turning the TFT off and back on again. (feature available via github repo, soon via x2go repo too) * ''branding=https|http|ftp://your-http-server-ip-or-dns-here/x2go-tce/x2go-tce-branding.svg'' - use this to specify an SVG file to "brand" your X2Go-TCE with. It will replace the seal icon in the lower left of the login screen. See below for how to add this file to your HTTP, HTTPS, or FTP server. **Attention: Whoever manages to spoof the server name can inject rogue images into your ThinClients.** To mitigate this risk, use HTTPS, where the attacker would have to spoof both server name and matching certificate. * ''copysecring'' - this will scan for USB media and fixed disk media (with USB media taking precedence) at boot for one or more of the following directories: ''config/ssh'', 'ssh', ''.ssh''. The volume must be labeled ''X2GO-TCE-LIVE'' or ''PORTABLEAPP'' and may use any supported file system. Any SSH Secret Keys found there will be copied into ''/home/user/.ssh'' (in the ramdisk), with proper permissions and ownerships for the default user account. This may come in handy when you are using SSH Secret Keys on USB media, but need to log in and out of sessions often, and don't want to leave the USB media plugged in all the time/don't want to have to re-insert it before each session startup. **Attention: This poses a security risk when other people are using your ThinClient afterwards (as they will have access to your keys).** To mitigate this risk,be sure to power-cycle the ThinClient once you are done. You //should// specify this parameter when booting X2Go-TCE-Live from portable media when you want to use SSH Secret Keys, to make sure your secret key on the VAT/NTFS partition is available. But as stated above, be sure to power-cycle the machine once you're done. * ''earlyblankdpmsfix'' - This forces the TFT do black for a few seconds during the initial boot phase (right after the squashfs was downloaded), then forces it back on again. This fixes an occasional "black screen" issue that occurs with some flaky client/TFT hardware combinations when using DisplayPort connectors, and could otherwise only be remediated by manually turning the TFT off and back on again. (feature available via github repo, soon via x2go repo too) + * ''homepageurl="URL1[|URL2|URLn]"'' - this is only available in MiniDesktop mode. It allows you to specify one or more web pages that show up on Browser start/when clicking the "Home" icon. URLs need to be separated with a ''|'', and the set of URLs needs to be enclosed in double quotes. Do //not// enclose each URL in double quotes separately! Correct example: ''homepageurl="https://www.google.de|https://wiki.x2go.org"'' * ''ldap=ldap.example.com:389:cn=cngoeshere,dc=example,dc=com'' - this allows you to specify an LDAP server to connect to - note that this is not needed for LDAP-based authentication, only when you intend to store entire session profiles in LDAP. You should really consider using the X2Go Session Broker instead. * ''ldap1=ldap-backupserver-1.example.com:389'' - this allows you to specify the first of up to two LDAP backup servers when using LDAP authentication * ''ldap2=ldap-backupserver-2.example.com:389'' - this allows you to specify the second of up to two LDAP backup servers when using LDAP authentication * ''nodpms'' - Will not touch DPMS settings at all (by default, ''blank=0'' does both ''xset s off'' and ''xset -dpms''). Use this along with ''blank=n'' if you do want to blank the screen, but your screen is confused by DPMS settings. -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 12 Feb '18

12 Feb '18

A page in your DokuWiki was added or changed. Here are the details: Date : 2018/02/12 14:48 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.7.2 IP-Address : 134.3.37.90 Hostname : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1518446717 New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [List of open ToDos/FIXMEs for this page] explained how parameters currently unsupported in MiniDesktop mode could be made to work User : stefanbaur @@ -1180,11 +1180,11 @@ FIXME <del>Setting the time via NTP will fail if the TC can't establish a connection to an NTP server via the internet. It would make sense to allow specifying an internal NTP server via a boot parameter.</del> fixed in github repo, soon in x2go repo FIXME <del>copysecring currently does not work in MiniDesktop-Mode, as it copies the keys to the wrong user's homedir.</del> fixed in github repo, soon in x2go repo - FIXME ''audioout='', ''blank='', ''blankdpmsfix'', ''broker-url='', ''ldap='', ''ldap1='', ''ldap2='', ''nodpms'', ''session='', ''throttle='', ''xinerama='', are currently unsupported in MiniDesktop-Mode. This could be changed, given enough tuits. + FIXME ''audioout='', ''blank='', ''blankdpmsfix'', ''broker-url='', ''ldap='', ''ldap1='', ''ldap2='', ''nodpms'', ''session='', ''throttle='', ''xinerama='', are currently unsupported in MiniDesktop-Mode. This could be changed, given enough tuits. Probably the easiest way would be to outsource as many of them as possible into scripts under ''/etc/X11/Xsession.d/'' (currently, they reside in ''/lib/live/config/2900-x2go-thinclientconfig'' - which doesn't exist in the MiniDesktop branches - and from there, they get written to ''~/.xsession'' FIXME nomagicpixel= is currently unsupported in MiniDesktop-Mode and probably will be unsupported there forever, as it doesn't make sense for MiniDesktop-Mode. FIXME bg= and branding= are currently unsupported in MiniDesktop-Mode. Adding support for these doesn't need many tuits. A third option for the desktop background could be added as well - possibly for regular TCE mode as well, overriding our default blue. FIXME homepageurl= (only available in MiniDesktop-Mode) is currently undocumented. Supports multiple URLs separated with pipes. -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 12 Feb '18

12 Feb '18

A page in your DokuWiki was added or changed. Here are the details: Date : 2018/02/12 14:45 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.7.2 IP-Address : 134.3.37.90 Hostname : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1518446606 New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [List of open ToDos/FIXMEs for this page] added bug for minidesktop and ssh private keys User : stefanbaur @@ -1150,8 +1150,10 @@ * If a session is set to "Try auto login (via SSH Agent or default SSH key)" and NO keyfile is set, then X2GoClient will try **all** secret keys in .ssh. Showing a password prompt if a key is password-protected is handled by X2GoClient, so needs no extra work. * To specify a keyfile, either: * use ''~/.ssh/keyfilename'' as path and use ''copysecring'', or * do not use ''copysecring'' and use ''/media/vendor_model_name/sdxn/path/to/keyfile'' as keyfile path/name + + FIXME copying ssh private keys seems to fail in MiniDesktop-Mode - possibly because of the priming/pruning/cleanup action performed on the homedirectory by the minidesktop init scripts? FIXME 2200-xserver-xorg-getxorgconf should be taught to understand file:<nowiki>//</nowiki> URLs. FIXME Parsing the output of e.g. <code>udevadm info --query path /dev/sdb -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 12 Feb '18

12 Feb '18

A page in your DokuWiki was added or changed. Here are the details: Date : 2018/02/12 14:43 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.7.2 IP-Address : 134.3.37.90 Hostname : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1518446464 New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [List of open ToDos/FIXMEs for this page] updated list of parameters that are unsupported in MiniDesktop-Mode User : stefanbaur @@ -1178,11 +1178,11 @@ FIXME <del>Setting the time via NTP will fail if the TC can't establish a connection to an NTP server via the internet. It would make sense to allow specifying an internal NTP server via a boot parameter.</del> fixed in github repo, soon in x2go repo FIXME <del>copysecring currently does not work in MiniDesktop-Mode, as it copies the keys to the wrong user's homedir.</del> fixed in github repo, soon in x2go repo - FIXME blank=, broker-url=, ldap=, ldap1=, ldap2=, session=, throttle=, xinerama=, are currently unsupported in MiniDesktop-Mode. This could be changed, given enough tuits. + FIXME ''audioout='', ''blank='', ''blankdpmsfix'', ''broker-url='', ''ldap='', ''ldap1='', ''ldap2='', ''nodpms'', ''session='', ''throttle='', ''xinerama='', are currently unsupported in MiniDesktop-Mode. This could be changed, given enough tuits. FIXME nomagicpixel= is currently unsupported in MiniDesktop-Mode and probably will be unsupported there forever, as it doesn't make sense for MiniDesktop-Mode. FIXME bg= and branding= are currently unsupported in MiniDesktop-Mode. Adding support for these doesn't need many tuits. A third option for the desktop background could be added as well - possibly for regular TCE mode as well, overriding our default blue. FIXME homepageurl= (only available in MiniDesktop-Mode) is currently undocumented. Supports multiple URLs separated with pipes. -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 12 Feb '18

12 Feb '18

A page in your DokuWiki was added or changed. Here are the details: Date : 2018/02/12 14:41 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.7.2 IP-Address : 134.3.37.90 Hostname : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1518443351 New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [List of open ToDos/FIXMEs for this page] added partition label support User : stefanbaur @@ -1160,9 +1160,9 @@ Authentification and "hard" identification could be implemented using OpenPGP cards, ''scdaemon'' and a script based on ''/usr/share/doc/scdaemon/examples/scd-event''. For Status ''NOCARD'', suspend the session (kill x2goclient or send a signal that means "suspend", if available, or maybe sighup nxproxy), for status ''USABLE'', run ''gpg --card-status 2>&1 | awk '$1=="Serial" && $2=="number" {print $4}''' to determine the card's serial number, then act based on that (pull new sessions file or set default user, for example, and restart x2goclient). FIXME <del>Automount script expansion is in the works. Will fully support VFAT, NTFS, hfs, hpfs, will offer read-only support for ext* via fuseext2 (that way, file ownership/permissions are ignored).</del> fixed. - FIXME Maybe we should add symlinks to the mount points created by the automounter: Currently, we create ''/media/vendor_model_name/sdxn'' as a mount point. The idea is to allow the user to find their portable device using the vendor/model name description. However, this is unusable for scripting, as the ''//x//'' in ''sdxn'' may change any time. We should replace ''//sdx//'' with ''//partition//'' (or have corresponding symlinks created), but what should we do for //superfloppies// that only have ''sdx'' with no partition number? We could mount them as ''/media/vendor_model_name/partition/'' or directly at ''/media/vendor_model_name/''. Also, symlinks using labels and uuids, similar to ''/dev/by-*'' would be handy for scripting. Another problem: when replacing ''sdx'', what will happen when a user inserts two media with the same vendor/model name at the same time? Blindly replacing the string would make one of them inaccessible due to overwriting the symlink(s). We'd have to start checking active mounts and enumerate them like ''media/vendor_model_name/1/partitionn/'' or ''media/vendor_model_name-1/partitionn/''. + FIXME <del>Maybe we should add symlinks to the mount points created by the automounter: Currently, we create ''/media/vendor_model_name/sdxn'' as a mount point. The idea is to allow the user to find their portable device using the vendor/model name description. However, this is unusable for scripting, as the ''//x//'' in ''sdxn'' may change any time. We should replace ''//sdx//'' with ''//partition//'' (or have corresponding symlinks created), but what should we do for //superfloppies// that only have ''sdx'' with no partition number? We could mount them as ''/media/vendor_model_name/partition/'' or directly at ''/media/vendor_model_name/''. Also, symlinks using labels and uuids, similar to ''/dev/by-*'' would be handy for scripting. Another problem: when replacing ''sdx'', what will happen when a user inserts two media with the same vendor/model name at the same time? Blindly replacing the string would make one of them inaccessible due to overwriting the symlink(s). We'd have to start checking active mounts and enumerate them like ''/media/vendor_model_name/1/partitionn'' or ''/media/vendor_model_name-1/partitionn''</del> Fixed. When a label is detected, a symlink is now created under ''/media/vendor_model_name/label'' that points to ''/media/vendor_model_name/partitionn''. FIXME Automount script currently expects a LUKS password in ''/etc/keys/keystick.key'' when it believes it has found an encrypted partition on USB media. This is a problem in general, as it should be trivial to sniff out this password using a rogue client. If we want to support this feature, though, we should add code to the build script that lets the user place a password file in the image, and sets proper restrictive permissions. Adding a boot parameter instead of hardcoding it would allow for dynamic password files, but on the other hand, would make it even easier to sniff out the password. FIXME ''x2gocdmanager'' is currently not part of the image, but should become part of it. While optical media are on their way out, they still exist and thus we should support them. However, the script is hardcoded for X2Go-TCE-NFS and needs to be adapted to work with both TCEs. -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

x2go-commits