x2go-commits

x2go-commits@lists.x2go.org

37903 discussions

nxcompshad.git - build-main (branch) updated: 3.4.0.4
by git-admin＠x2go.org 30 Jun '11

30 Jun '11

The branch, build-main has been updated via ceda6a361ff962332dd4795b86b87665885f6867 (commit) via 05f6ac1a79b741a199d7ebb3ce110ad8bd40e0b7 (commit) via 10984f56ffc28665b2bb9ec31c9af38e4b6c187e (commit) via 15d31476e497cc5a181fe0a3c260c8a74f7d07bf (commit) via 85f20c0ceea408937e3e6280b33b9dac6feecc24 (commit) via 4d7f7abe21e6dd59b70e307d2239eaf12c74d1ab (commit) via dfbd4c56333bd282dcae19509081b6215a9f541d (commit) from 648365a00a62ac4cec8ffacb59aaa8927d887f93 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- ----------------------------------------------------------------------- Summary of changes: CHANGELOG | 4 + INSTALL | 32 + Makefile.in | 35 +- Misc.h | 4 +- VERSION | 2 +- configure | 5778 --------------------------- configure.in | 11 +- debian/changelog | 13 + debian/changelog.revu | 5 - debian/control | 18 +- debian/patches/01_system_wide_build.patch | 22 - debian/patches/cflags.patch | 21 - debian/patches/nxcompshad-3.2.0-gcc43.patch | 13 - debian/patches/nxcompshad-3.3.0-Xext.patch | 11 - debian/patches/series | 4 - debian/rules | 13 +- debian/watch | 3 - 17 files changed, 104 insertions(+), 5885 deletions(-) create mode 100644 INSTALL delete mode 100755 configure delete mode 100644 debian/changelog.revu delete mode 100644 debian/patches/01_system_wide_build.patch delete mode 100644 debian/patches/cflags.patch delete mode 100644 debian/patches/nxcompshad-3.2.0-gcc43.patch delete mode 100644 debian/patches/nxcompshad-3.3.0-Xext.patch delete mode 100644 debian/patches/series delete mode 100644 debian/watch The diff of changes is: diff --git a/CHANGELOG b/CHANGELOG index 534fc43..9a6017a 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,5 +1,9 @@ ChangeLog: +nxcompshad-3.4.0.4 + +- Adds make install/uninstall functionality + nxcompshad-3.4.0.3 - Changed version number scheme, upstream now maintained by X2go project diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..5440d6b --- /dev/null +++ b/INSTALL @@ -0,0 +1,32 @@ +Installing NX libs from Tarball +=============================== + +1. DOWNLOAD +----------- +Download NX lib tarball (nxcomp, nxcompext, nxcompshad) + +2. EXTRACTION +------------- +Extract the tarball + +$ tar vzxf nxcomp..._version.tar.gz + +3. BUILD +-------- +Run the following commands for building from source + +$ autoconf +$ ./configure +$ make + +4. INSTALL +---------- +For installation: + +$ sudo make install + +5. UNINSTALL +------------ +For deinstallation + +$ sudo make uninstall diff --git a/Makefile.in b/Makefile.in index eaf5cab..1727d58 100755 --- a/Makefile.in +++ b/Makefile.in @@ -48,7 +48,7 @@ CCINCLUDES = CCDEFINES = LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ -L/usr/X11R6/lib -lX11 +LIBS = @LIBS@ -L/usr/X11R6/lib -lX11 -lXext # # Only if THREADS is defined. @@ -76,8 +76,13 @@ man1dir = @mandir@/man1 VPATH = @srcdir@ INSTALL = @INSTALL@ +INSTALL_DIR = $(INSTALL) -d -o root -g root -m 0755 INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ +INSTALL_LINK = cp -av +DESTDIR = +RM_FILE = rm -f +RM_DIR = rmdir -p --ignore-fail-on-non-empty # # This should be autodetected. @@ -178,12 +183,38 @@ depend.status: fi touch depend.status -install: install.bin install.man +install: install.bin install.lib install.man install.bin: +install.lib: all + $(INSTALL_DIR) $(DESTDIR)$(prefix)/lib/nx + $(INSTALL_DIR) $(DESTDIR)$(prefix)/include/nx + $(INSTALL_DATA) libXcompshad.so.3.* $(DESTDIR)$(prefix)/lib + $(INSTALL_LINK) libXcompshad.so.3 $(DESTDIR)$(prefix)/lib + $(INSTALL_LINK) libXcompshad.so $(DESTDIR)$(prefix)/lib + $(INSTALL_DATA) *.a $(DESTDIR)$(prefix)/lib/nx + $(INSTALL_DATA) *.h $(DESTDIR)$(prefix)/include/nx + echo "Running ldconfig tool, this may take a while..." && ldconfig + install.man: +uninstall: uninstall.bin uninstall.lib uninstall.man + +uninstall.bin: + +uninstall.lib: + $(RM_FILE) $(DESTDIR)$(prefix)/lib/libXcompshad.so.3.* + $(RM_FILE) $(DESTDIR)$(prefix)/lib/libXcompshad.so.3 + $(RM_FILE) $(DESTDIR)$(prefix)/lib/libXcompshad.so + $(RM_FILE) $(DESTDIR)$(prefix)/lib/nx/libXcompshad.a + for header in *.h; do $(RM_FILE) $(DESTDIR)$(prefix)/include/nx/$$header; done + $(RM_DIR) $(DESTDIR)$(prefix)/lib/nx/ + $(RM_DIR) $(DESTDIR)$(prefix)/include/nx/ + echo "Running ldconfig tool, this may take a while..." && ldconfig + +uninstall.man: + clean: -rm -f *~ *.o *.bak st?????? core core.* *.out.* *.exe.stackdump \ $(LIBFULL) $(LIBLOAD) $(LIBSHARED) $(LIBARCHIVE) $(LIBDLL) $(LIBDLLSTATIC) $(PROGRAM) $(PROGRAM).exe diff --git a/Misc.h b/Misc.h index 3bcb266..8069a5c 100644 --- a/Misc.h +++ b/Misc.h @@ -20,8 +20,8 @@ #include <iostream> -#include <errno.h> -#include <string.h> +#include <cerrno> +#include <cstring> using namespace std; diff --git a/VERSION b/VERSION index 9f18495..2e263ee 100644 --- a/VERSION +++ b/VERSION @@ -1,2 +1,2 @@ -3.4.0.3 +3.4.0.4 diff --git a/configure b/configure deleted file mode 100755 index d5b4228..0000000 --- a/configure +++ /dev/null @@ -1,5778 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.59. -# -# Copyright (C) 2003 Free Software Foundation, Inc. -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi -DUALCASE=1; export DUALCASE # for MKS sh - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '$a$' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename "$0" || -$as_expr X/"$0" : '.*/$[^/][^/]*$/*$' \| \ - X"$0" : 'X$//$$' \| \ - X"$0" : 'X$/$$' \| \ - . : '$.$' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/$[^/][^/]*$\/*$/{ s//\1/; q; } - /^X\/$\/\/$$/{ s//\1/; q; } - /^X\/$\/$.*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^$['$as_cr_digits']*$$.*$[$]LINENO$[^'$as_cr_alnum'_]$,\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '$a$' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - - -# Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -exec 6>&1 - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_config_libobj_dir=. -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} - -# Maximum number of lines to put in a shell here document. -# This variable seems obsolete. It should probably be removed, and -# only ac_max_sed_lines should be used. -: ${ac_max_here_lines=38} - -# Identity of this package. -PACKAGE_NAME= -PACKAGE_TARNAME= -PACKAGE_VERSION= -PACKAGE_STRING= -PACKAGE_BUGREPORT= - -ac_unique_file="Shadow.h" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS armcxx armcc CXX CXXFLAGS LDFLAGS CPPFLAGS ac_ct_CXX EXEEXT OBJEXT CC CFLAGS ac_ct_CC INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CXXCPP X_CFLAGS X_PRE_LIBS X_LIBS X_EXTRA_LIBS LIBVERSION VERSION MAKEDEPEND LIBOBJS LTLIBOBJS' -ac_subst_files='' - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -ac_prev= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - ac_optarg=`expr "x$ac_option" : 'x[^=]*=$.*$'` - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_option in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-$.*$'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval "enable_$ac_feature=no" ;; - - -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-$[^=]*$'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "enable_$ac_feature='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-$[^=]*$'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package| sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "with_$ac_package='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-$.*$'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/-/_/g'` - eval "with_$ac_package=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) { echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x$[^=]*$='` - # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` - eval "$ac_envvar='$ac_optarg'" - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } -fi - -# Be sure to have absolute paths. -for ac_var in exec_prefix prefix -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* | NONE | '' ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# Be sure to have absolute paths. -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_confdir=`(dirname "$0") 2>/dev/null || -$as_expr X"$0" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ - X"$0" : 'X$//$[^/]' \| \ - X"$0" : 'X$//$$' \| \ - X"$0" : 'X$/$' \| \ - . : '$.$' 2>/dev/null || -echo X"$0" | - sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X$\/\/$[^/].*/{ s//\1/; q; } - /^X$\/\/$$/{ s//\1/; q; } - /^X$\/$.*/{ s//\1/; q; } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 - { (exit 1); exit 1; }; } - else - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } - fi -fi -(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 - { (exit 1); exit 1; }; } -srcdir=`echo "$srcdir" | sed 's%$[^\\/]$[\\/]*$%\1%'` -ac_env_build_alias_set=${build_alias+set} -ac_env_build_alias_value=$build_alias -ac_cv_env_build_alias_set=${build_alias+set} -ac_cv_env_build_alias_value=$build_alias -ac_env_host_alias_set=${host_alias+set} -ac_env_host_alias_value=$host_alias -ac_cv_env_host_alias_set=${host_alias+set} -ac_cv_env_host_alias_value=$host_alias -ac_env_target_alias_set=${target_alias+set} -ac_env_target_alias_value=$target_alias -ac_cv_env_target_alias_set=${target_alias+set} -ac_cv_env_target_alias_value=$target_alias -ac_env_CXX_set=${CXX+set} -ac_env_CXX_value=$CXX -ac_cv_env_CXX_set=${CXX+set} -ac_cv_env_CXX_value=$CXX -ac_env_CXXFLAGS_set=${CXXFLAGS+set} -ac_env_CXXFLAGS_value=$CXXFLAGS -ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} -ac_cv_env_CXXFLAGS_value=$CXXFLAGS -ac_env_LDFLAGS_set=${LDFLAGS+set} -ac_env_LDFLAGS_value=$LDFLAGS -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -ac_cv_env_LDFLAGS_value=$LDFLAGS -ac_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_env_CPPFLAGS_value=$CPPFLAGS -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_cv_env_CPPFLAGS_value=$CPPFLAGS -ac_env_CC_set=${CC+set} -ac_env_CC_value=$CC -ac_cv_env_CC_set=${CC+set} -ac_cv_env_CC_value=$CC -ac_env_CFLAGS_set=${CFLAGS+set} -ac_env_CFLAGS_value=$CFLAGS -ac_cv_env_CFLAGS_set=${CFLAGS+set} -ac_cv_env_CFLAGS_value=$CFLAGS -ac_env_CXXCPP_set=${CXXCPP+set} -ac_env_CXXCPP_value=$CXXCPP -ac_cv_env_CXXCPP_set=${CXXCPP+set} -ac_cv_env_CXXCPP_value=$CXXCPP - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures this package to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -_ACEOF - - cat <<_ACEOF -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data [PREFIX/share] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --infodir=DIR info documentation [PREFIX/info] - --mandir=DIR man documentation [PREFIX/man] -_ACEOF - - cat <<\_ACEOF - -X features: - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR -_ACEOF -fi - -if test -n "$ac_init_help"; then - - cat <<\_ACEOF - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-x use the X Window System - -Some influential environment variables: - CXX C++ compiler command - CXXFLAGS C++ compiler flags - LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a - nonstandard directory <lib dir> - CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have - headers in a nonstandard directory <include dir> - CC C compiler command - CFLAGS C compiler flags - CXXCPP C++ preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -_ACEOF -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - ac_popdir=`pwd` - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d $ac_dir || continue - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac - - cd $ac_dir - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_srcdir/configure.gnu; then - echo - $SHELL $ac_srcdir/configure.gnu --help=recursive - elif test -f $ac_srcdir/configure; then - echo - $SHELL $ac_srcdir/configure --help=recursive - elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then - echo - $ac_configure --help - else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi - cd $ac_popdir - done -fi - -test -n "$ac_init_help" && exit 0 -if $ac_init_version; then - cat <<\_ACEOF - -Copyright (C) 2003 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit 0 -fi -exec 5>config.log -cat >&5 <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by $as_me, which was -generated by GNU Autoconf 2.59. Invocation command line was - - $ $0 $@ - -_ACEOF -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" -done - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_sep= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; - 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - # Get rid of the leading space. - ac_sep=" " - ;; - esac - done -done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Be sure not to use single quotes in there, as some shells, -# such as our DU 5.0 friend, will then `close' the trap. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - cat <<\_ASBOX -## ---------------- ## -## Cache variables. ## -## ---------------- ## -_ASBOX - echo - # The following way of writing the cache mishandles newlines in values, -{ - (set) 2>&1 | - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in - *ac_space=\ *) - sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1='"'"'\\2'"'"'/p" - ;; - *) - sed -n \ - "s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1=\\2/p" - ;; - esac; -} - echo - - cat <<\_ASBOX -## ----------------- ## -## Output variables. ## -## ----------------- ## -_ASBOX - echo - for ac_var in $ac_subst_vars - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------- ## -## Output files. ## -## ------------- ## -_ASBOX - echo - for ac_var in $ac_subst_files - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - fi - - if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## -## confdefs.h. ## -## ----------- ## -_ASBOX - echo - sed "/^$/d" confdefs.h | sort - echo - fi - test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core && - rm -rf conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status - ' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo >confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; - esac - fi -else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_$[a-zA-Z_0-9]*$_set=.*/\1/p'`; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val="\$ac_cv_env_${ac_var}_value" - eval ac_new_val="\$ac_env_${ac_var}_value" - case $ac_old_set,$ac_new_set in - set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\{\}\\\|\;\<\>\?\"\']*) - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - - - - - - - - - - - - - - - - - - -CXXFLAGS="-O3" -CPPFLAGS="-O3" - - -LIBSTATIC="" -LIBSHARED="" - - -if test -d "../nx-X11/exports/include" ; then - CXXFLAGS="$CXXFLAGS -I../nx-X11/exports/include" - LIBS="$LIBS -L../nx-X11/exports/lib" -fi - - -if test "${with_ipaq}" = yes; then - echo -e "enabling IPAQ configuration" - CXX="arm-linux-c++" - CC="arm-linux-gcc" - unset ac_cv_prog_armcxx - unset ac_cv_prog_armcc - unset ac_cv_prog_CXXCPP - # Extract the first word of ""$CXX"", so it can be a program name with args. -set dummy "$CXX"; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_armcxx+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$armcxx"; then - ac_cv_prog_armcxx="$armcxx" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_armcxx="yes" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_armcxx" && ac_cv_prog_armcxx="no" -fi -fi -armcxx=$ac_cv_prog_armcxx -if test -n "$armcxx"; then - echo "$as_me:$LINENO: result: $armcxx" >&5 -echo "${ECHO_T}$armcxx" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - # Extract the first word of ""$CC"", so it can be a program name with args. -set dummy "$CC"; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_armcc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$armcc"; then - ac_cv_prog_armcc="$armcc" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_armcc="yes" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_armcc" && ac_cv_prog_armcc="no" -fi -fi -armcc=$ac_cv_prog_armcc -if test -n "$armcc"; then - echo "$as_me:$LINENO: result: $armcc" >&5 -echo "${ECHO_T}$armcc" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - if test $armcxx = "yes" && test $armcc = "yes" ; then - ac_cv_prog_CXX="$CXX" - ac_cv_prog_CC="$CC" - else - { { echo "$as_me:$LINENO: error: installation or configuration problem: I cannot find compiler for arm-linux" >&5 -echo "$as_me: error: installation or configuration problem: I cannot find compiler for arm-linux" >&2;} - { (exit 1); exit 1; }; } - fi -else - unset ac_cv_prog_CXX - unset ac_cv_prog_CC - unset ac_cv_prog_CXXCPP -fi - - -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -if test -n "$ac_tool_prefix"; then - for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CXX+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CXX"; then - ac_cv_prog_CXX="$CXX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CXX=$ac_cv_prog_CXX -if test -n "$CXX"; then - echo "$as_me:$LINENO: result: $CXX" >&5 -echo "${ECHO_T}$CXX" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$CXX" && break - done -fi -if test -z "$CXX"; then - ac_ct_CXX=$CXX - for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CXX"; then - ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CXX="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CXX=$ac_cv_prog_ac_ct_CXX -if test -n "$ac_ct_CXX"; then - echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 -echo "${ECHO_T}$ac_ct_CXX" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$ac_ct_CXX" && break -done -test -n "$ac_ct_CXX" || ac_ct_CXX="g++" - - CXX=$ac_ct_CXX -fi - - -# Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C++ compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 - (eval $ac_compiler --version </dev/null >&5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 - (eval $ac_compiler -v </dev/null >&5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 - (eval $ac_compiler -V </dev/null >&5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -echo "$as_me:$LINENO: checking for C++ compiler default output file name" >&5 -echo $ECHO_N "checking for C++ compiler default output file name... $ECHO_C" >&6 -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 - (eval $ac_link_default) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Find the output, starting from the most likely. This scheme is -# not robust to junk in `.', hence go to wildcards (a.*) only as a last -# resort. - -# Be careful to initialize this variable, since it used to be cached. -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. -ac_cv_exeext= -# b.out is created by i960 compilers. -for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) - ;; - conftest.$ac_ext ) - # This is the source file. - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - ac_cv_exeext=`expr "$ac_file" : '[^.]*$\..*$'` - # FIXME: I believe we export ac_cv_exeext for Libtool, - # but it would be cool to find out if it's true. Does anybody - # maintain Libtool? --akim. - export ac_cv_exeext - break;; - * ) - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: C++ compiler cannot create executables -See \`config.log' for more details." >&5 -echo "$as_me: error: C++ compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; } -fi - -ac_exeext=$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6 - -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether the C++ compiler works" >&5 -echo $ECHO_N "checking whether the C++ compiler works... $ECHO_C" >&6 -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { echo "$as_me:$LINENO: error: cannot run C++ compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run C++ compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - -rm -f a.out a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6 - -echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*$\..*$'` - export ac_cv_exeext - break;; - * ) break;; - esac -done -else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6 - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 -if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.$.*$'` - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6 -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6 -if test "${ac_cv_cxx_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_compiler_gnu=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_cxx_compiler_gnu=$ac_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6 -GXX=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CXXFLAGS=${CXXFLAGS+set} -ac_save_CXXFLAGS=$CXXFLAGS -CXXFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 -echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cxx_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cxx_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_prog_cxx_g=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6 -if test "$ac_test_CXXFLAGS" = set; then - CXXFLAGS=$ac_save_CXXFLAGS -elif test $ac_cv_prog_cxx_g = yes; then - if test "$GXX" = yes; then - CXXFLAGS="-g -O2" - else - CXXFLAGS="-g" - fi -else - if test "$GXX" = yes; then - CXXFLAGS="-O2" - else - CXXFLAGS= - fi -fi -for ac_declaration in \ - '' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -#include <stdlib.h> -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -continue -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$ac_ct_CC" && break -done - - CC=$ac_ct_CC -fi - -fi - - -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - -# Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 - (eval $ac_compiler --version </dev/null >&5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 - (eval $ac_compiler -v </dev/null >&5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 - (eval $ac_compiler -V </dev/null >&5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_compiler_gnu=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -GCC=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_prog_cc_g=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_prog_cc_stdc=no -ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <stdarg.h> -#include <stdio.h> -#include <sys/types.h> -#include <sys/stat.h> -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std1 is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std1. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX 10.20 and later -Ae -# HP-UX older versions -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg -break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext -done -rm -f conftest.$ac_ext conftest.$ac_objext -CC=$ac_save_CC - -fi - -case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6 ;; - *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; -esac - -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. -cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - '' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -#include <stdlib.h> -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -continue -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h -fi - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - - -echo "$as_me:$LINENO: checking whether compiler needs -Wno-deprecated" >&5 -echo $ECHO_N "checking whether compiler needs -Wno-deprecated... $ECHO_C" >&6 -gcc_version=`${CC} --version | grep 'gcc (GCC) [3-4].' | head -n 1` -case "${gcc_version}" in - gcc*) - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - CXXFLAGS="$CXXFLAGS -Wno-deprecated" - CPPFLAGS="$CPPFLAGS -Wno-deprecated" - ;; - - *) - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - ;; -esac - -echo "$as_me:$LINENO: checking whether compiler accepts -Wmissing-declarations and -Wnested-externs" >&5 -echo $ECHO_N "checking whether compiler accepts -Wmissing-declarations and -Wnested-externs... $ECHO_C" >&6 -gcc_version=`${CC} --version | grep 'gcc (GCC) [3-4].' | head -n 1` -case "${gcc_version}" in - gcc*) - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - ;; - - *) - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - CXXFLAGS="$CXXFLAGS -Wmissing-declarations -Wnested-externs" - CPPFLAGS="$CPPFLAGS -Wmissing-declarations -Wnested-externs" - ;; -esac - - -ac_aux_dir= -for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f $ac_dir/shtool; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 -echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} - { (exit 1); exit 1; }; } -fi -ac_config_guess="$SHELL $ac_aux_dir/config.guess" -ac_config_sub="$SHELL $ac_aux_dir/config.sub" -ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 -if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - done - done - ;; -esac -done - - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL=$ac_install_sh - fi -fi -echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6 - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - - - - -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 -echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 -if test -z "$CXXCPP"; then - if test "${ac_cv_prog_CXXCPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CXXCPP needs to be expanded - for CXXCPP in "$CXX -E" "/lib/cpp" - do - ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CXXCPP=$CXXCPP - -fi - CXXCPP=$ac_cv_prog_CXXCPP -else - ac_cv_prog_CXXCPP=$CXXCPP -fi -echo "$as_me:$LINENO: result: $CXXCPP" >&5 -echo "${ECHO_T}$CXXCPP" >&6 -ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - -echo "$as_me:$LINENO: checking for X" >&5 -echo $ECHO_N "checking for X... $ECHO_C" >&6 - - -# Check whether --with-x or --without-x was given. -if test "${with_x+set}" = set; then - withval="$with_x" - -fi; -# $have_x is `yes', `no', `disabled', or empty when we do not yet know. -if test "x$with_x" = xno; then - # The user explicitly disabled X. - have_x=disabled -else - if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then - # Both variables are already set. - have_x=yes - else - if test "${ac_cv_have_x+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # One or both of the vars are not set, and there is no cached value. -ac_x_includes=no ac_x_libraries=no -rm -fr conftest.dir -if mkdir conftest.dir; then - cd conftest.dir - # Make sure to not put "make" in the Imakefile rules, since we grep it out. - cat >Imakefile <<'_ACEOF' -acfindx: - @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' -_ACEOF - if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then - # GNU make sometimes prints "make[1]: Entering...", which would confuse us. - eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` - # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. - for ac_extension in a so sl; do - if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && - test -f $ac_im_libdir/libX11.$ac_extension; then - ac_im_usrlibdir=$ac_im_libdir; break - fi - done - # Screen out bogus values from the imake configuration. They are - # bogus both because they are the default anyway, and because - # using them would break gcc on systems where it needs fixed includes. - case $ac_im_incroot in - /usr/include) ;; - *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; - esac - case $ac_im_usrlibdir in - /usr/lib | /lib) ;; - *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; - esac - fi - cd .. - rm -fr conftest.dir -fi - -# Standard set of common directories for X headers. -# Check X11 before X11Rn because it is often a symlink to the current release. -ac_x_header_dirs=' -/usr/X11/include -/usr/X11R6/include -/usr/X11R5/include -/usr/X11R4/include - -/usr/include/X11 -/usr/include/X11R6 -/usr/include/X11R5 -/usr/include/X11R4 - -/usr/local/X11/include -/usr/local/X11R6/include -/usr/local/X11R5/include -/usr/local/X11R4/include - -/usr/local/include/X11 -/usr/local/include/X11R6 -/usr/local/include/X11R5 -/usr/local/include/X11R4 - -/usr/X386/include -/usr/x386/include -/usr/XFree86/include/X11 - -/usr/include -/usr/local/include -/usr/unsupported/include -/usr/athena/include -/usr/local/x11r5/include -/usr/lpp/Xamples/include - -/usr/openwin/include -/usr/openwin/share/include' - -if test "$ac_x_includes" = no; then - # Guess where to find include files, by looking for Intrinsic.h. - # First, try using that file with no special directory specified. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <X11/Intrinsic.h> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # We can compile using X headers with no special include directory. -ac_x_includes= -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - for ac_dir in $ac_x_header_dirs; do - if test -r "$ac_dir/X11/Intrinsic.h"; then - ac_x_includes=$ac_dir - break - fi -done -fi -rm -f conftest.err conftest.$ac_ext -fi # $ac_x_includes = no - -if test "$ac_x_libraries" = no; then - # Check for the libraries. - # See if we find them without any special options. - # Don't add to $LIBS permanently. - ac_save_LIBS=$LIBS - LIBS="-lXt $LIBS" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <X11/Intrinsic.h> -int -main () -{ -XtMalloc (0) - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - LIBS=$ac_save_LIBS -# We can link X programs with no special library path. -ac_x_libraries= -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -LIBS=$ac_save_LIBS -for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` -do - # Don't even attempt the hair of trying to link an X program! - for ac_extension in a so sl; do - if test -r $ac_dir/libXt.$ac_extension; then - ac_x_libraries=$ac_dir - break 2 - fi - done -done -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi # $ac_x_libraries = no - -if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then - # Didn't find X anywhere. Cache the known absence of X. - ac_cv_have_x="have_x=no" -else - # Record where we found X for the cache. - ac_cv_have_x="have_x=yes \ - ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" -fi -fi - - fi - eval "$ac_cv_have_x" -fi # $with_x != no - -if test "$have_x" != yes; then - echo "$as_me:$LINENO: result: $have_x" >&5 -echo "${ECHO_T}$have_x" >&6 - no_x=yes -else - # If each of the values was on the command line, it overrides each guess. - test "x$x_includes" = xNONE && x_includes=$ac_x_includes - test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries - # Update the cache value to reflect the command line values. - ac_cv_have_x="have_x=yes \ - ac_x_includes=$x_includes ac_x_libraries=$x_libraries" - echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 -echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6 -fi - -if test "$no_x" = yes; then - # Not all programs may use this symbol, but it does not hurt to define it. - -cat >>confdefs.h <<\_ACEOF -#define X_DISPLAY_MISSING 1 -_ACEOF - - X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= -else - if test -n "$x_includes"; then - X_CFLAGS="$X_CFLAGS -I$x_includes" - fi - - # It would also be nice to do this for all -L options, not just this one. - if test -n "$x_libraries"; then - X_LIBS="$X_LIBS -L$x_libraries" - # For Solaris; some versions of Sun CC require a space after -R and - # others require no space. Words are not sufficient . . . . - case `(uname -sr) 2>/dev/null` in - "SunOS 5"*) - echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 -echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6 - ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_R_nospace=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_R_nospace=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test $ac_R_nospace = yes; then - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - X_LIBS="$X_LIBS -R$x_libraries" - else - LIBS="$ac_xsave_LIBS -R $x_libraries" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_R_space=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_R_space=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test $ac_R_space = yes; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - X_LIBS="$X_LIBS -R $x_libraries" - else - echo "$as_me:$LINENO: result: neither works" >&5 -echo "${ECHO_T}neither works" >&6 - fi - fi - LIBS=$ac_xsave_LIBS - esac - fi - - # Check for system-dependent libraries X programs must link with. - # Do this before checking for the system-independent R6 libraries - # (-lICE), since we may need -lsocket or whatever for X linking. - - if test "$ISC" = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" - else - # Martyn Johnson says this is needed for Ultrix, if the X - # libraries were built with DECnet support. And Karl Berry says - # the Alpha needs dnet_stub (dnet does not exist). - ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char XOpenDisplay (); -int -main () -{ -XOpenDisplay (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 -echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6 -if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldnet $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dnet_ntoa (); -int -main () -{ -dnet_ntoa (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dnet_dnet_ntoa=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dnet_dnet_ntoa=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 -echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6 -if test $ac_cv_lib_dnet_dnet_ntoa = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" -fi - - if test $ac_cv_lib_dnet_dnet_ntoa = no; then - echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 -echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6 -if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldnet_stub $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dnet_ntoa (); -int -main () -{ -dnet_ntoa (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dnet_stub_dnet_ntoa=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dnet_stub_dnet_ntoa=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 -echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6 -if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" -fi - - fi -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$ac_xsave_LIBS" - - # msh(a)cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, - # to get the SysV transport functions. - # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4) - # needs -lnsl. - # The nsl library prevents programs from opening the X display - # on Irix 5.2, according to T.E. Dickey. - # The functions gethostbyname, getservbyname, and inet_addr are - # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. - echo "$as_me:$LINENO: checking for gethostbyname" >&5 -echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6 -if test "${ac_cv_func_gethostbyname+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define gethostbyname to an innocuous variant, in case <limits.h> declares gethostbyname. - For example, HP-UX 11i <limits.h> declares gettimeofday. */ -#define gethostbyname innocuous_gethostbyname - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char gethostbyname (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - -#undef gethostbyname - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char gethostbyname (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) -choke me -#else -char (*f) () = gethostbyname; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != gethostbyname; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_gethostbyname=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_gethostbyname=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 -echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6 - - if test $ac_cv_func_gethostbyname = no; then - echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 -echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6 -if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lnsl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char gethostbyname (); -int -main () -{ -gethostbyname (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_nsl_gethostbyname=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_nsl_gethostbyname=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 -echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6 -if test $ac_cv_lib_nsl_gethostbyname = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" -fi - - if test $ac_cv_lib_nsl_gethostbyname = no; then - echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 -echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6 -if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lbsd $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char gethostbyname (); -int -main () -{ -gethostbyname (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_bsd_gethostbyname=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_bsd_gethostbyname=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 -echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6 -if test $ac_cv_lib_bsd_gethostbyname = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" -fi - - fi - fi - - # lieder(a)skyler.mavd.honeywell.com says without -lsocket, - # socket/setsockopt and other routines are undefined under SCO ODT - # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary - # on later versions), says Simon Leinen: it contains gethostby* - # variants that don't use the name server (or something). -lsocket - # must be given before -lnsl if both are needed. We assume that - # if connect needs -lnsl, so does gethostbyname. - echo "$as_me:$LINENO: checking for connect" >&5 -echo $ECHO_N "checking for connect... $ECHO_C" >&6 -if test "${ac_cv_func_connect+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define connect to an innocuous variant, in case <limits.h> declares connect. - For example, HP-UX 11i <limits.h> declares gettimeofday. */ -#define connect innocuous_connect - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char connect (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - -#undef connect - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char connect (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_connect) || defined (__stub___connect) -choke me -#else -char (*f) () = connect; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != connect; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_connect=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_connect=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 -echo "${ECHO_T}$ac_cv_func_connect" >&6 - - if test $ac_cv_func_connect = no; then - echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 -echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6 -if test "${ac_cv_lib_socket_connect+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsocket $X_EXTRA_LIBS $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char connect (); -int -main () -{ -connect (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_socket_connect=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_socket_connect=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 -echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6 -if test $ac_cv_lib_socket_connect = yes; then - X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" -fi - - fi - - # Guillermo Gomez says -lposix is necessary on A/UX. - echo "$as_me:$LINENO: checking for remove" >&5 -echo $ECHO_N "checking for remove... $ECHO_C" >&6 -if test "${ac_cv_func_remove+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define remove to an innocuous variant, in case <limits.h> declares remove. - For example, HP-UX 11i <limits.h> declares gettimeofday. */ -#define remove innocuous_remove - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char remove (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - -#undef remove - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char remove (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_remove) || defined (__stub___remove) -choke me -#else -char (*f) () = remove; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != remove; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_remove=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_remove=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 -echo "${ECHO_T}$ac_cv_func_remove" >&6 - - if test $ac_cv_func_remove = no; then - echo "$as_me:$LINENO: checking for remove in -lposix" >&5 -echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6 -if test "${ac_cv_lib_posix_remove+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lposix $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char remove (); -int -main () -{ -remove (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_posix_remove=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_posix_remove=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 -echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6 -if test $ac_cv_lib_posix_remove = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" -fi - - fi - - # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. - echo "$as_me:$LINENO: checking for shmat" >&5 -echo $ECHO_N "checking for shmat... $ECHO_C" >&6 -if test "${ac_cv_func_shmat+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define shmat to an innocuous variant, in case <limits.h> declares shmat. - For example, HP-UX 11i <limits.h> declares gettimeofday. */ -#define shmat innocuous_shmat - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shmat (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - -#undef shmat - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shmat (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shmat) || defined (__stub___shmat) -choke me -#else -char (*f) () = shmat; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != shmat; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_shmat=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_shmat=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 -echo "${ECHO_T}$ac_cv_func_shmat" >&6 - - if test $ac_cv_func_shmat = no; then - echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 -echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6 -if test "${ac_cv_lib_ipc_shmat+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lipc $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shmat (); -int -main () -{ -shmat (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_ipc_shmat=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_ipc_shmat=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 -echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6 -if test $ac_cv_lib_ipc_shmat = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" -fi - - fi - fi - - # Check for libraries that X11R6 Xt/Xaw programs need. - ac_save_LDFLAGS=$LDFLAGS - test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" - # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to - # check for ICE first), but we must link in the order -lSM -lICE or - # we get undefined symbols. So assume we have SM if we have ICE. - # These have to be linked with before -lX11, unlike the other - # libraries we check for below, so use a different variable. - # John Interrante, Karl Berry - echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 -echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6 -if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lICE $X_EXTRA_LIBS $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char IceConnectionNumber (); -int -main () -{ -IceConnectionNumber (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_ICE_IceConnectionNumber=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_ICE_IceConnectionNumber=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 -echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6 -if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then - X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" -fi - - LDFLAGS=$ac_save_LDFLAGS - -fi - - - -ac_help="$ac_help - --with-symbols give -g flag to compiler to produce debug symbols - --with-info define INFO at compile time to get basic log output - --with-valgrind clean up allocated buffers to avoid valgrind warnings - --with-version use this version for produced libraries - - --with-static-jpeg enable static linking of JPEG library - --with-static-z enable static linking of Z library" - - - -echo "$as_me:$LINENO: checking for Cygwin32 environment" >&5 -echo $ECHO_N "checking for Cygwin32 environment... $ECHO_C" >&6 -if test "${nxconf_cv_cygwin32+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -return __CYGWIN32__; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - nxconf_cv_cygwin32=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -nxconf_cv_cygwin32=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -rm -f conftest* -fi -echo "$as_me:$LINENO: result: $nxconf_cv_cygwin32" >&5 -echo "${ECHO_T}$nxconf_cv_cygwin32" >&6 -CYGWIN32= -test "$nxconf_cv_cygwin32" = yes && CYGWIN32=yes - - -if test "$CYGWIN32" = yes; then - LIBS="$LIBS -lstdc++ -lcygipc -lgdi32" -fi - - - -echo "$as_me:$LINENO: checking for Darwin environment" >&5 -echo $ECHO_N "checking for Darwin environment... $ECHO_C" >&6 -if test "${nxconf_cv_darwin+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -return __APPLE__; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - nxconf_cv_darwin=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -nxconf_cv_darwin=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -rm -f conftest* -fi -echo "$as_me:$LINENO: result: $nxconf_cv_darwin" >&5 -echo "${ECHO_T}$nxconf_cv_darwin" >&6 -DARWIN= -test "$nxconf_cv_darwin" = yes && DARWIN=yes - - - -echo "$as_me:$LINENO: checking for Solaris environment" >&5 -echo $ECHO_N "checking for Solaris environment... $ECHO_C" >&6 -if test "${nxconf_cv_sun+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -return __sun; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - nxconf_cv_sun=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -nxconf_cv_sun=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -rm -f conftest* -fi -echo "$as_me:$LINENO: result: $nxconf_cv_sun" >&5 -echo "${ECHO_T}$nxconf_cv_sun" >&6 -SUN= -test "$nxconf_cv_sun" = yes && SUN=yes - - - -echo "$as_me:$LINENO: checking for FreeBSD environment" >&5 -echo $ECHO_N "checking for FreeBSD environment... $ECHO_C" >&6 -if test "${nxconf_cv_freebsd+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -return __FreeBSD__; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - nxconf_cv_freebsd=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -nxconf_cv_freebsd=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -rm -f conftest* -fi -echo "$as_me:$LINENO: result: $nxconf_cv_freebsd" >&5 -echo "${ECHO_T}$nxconf_cv_freebsd" >&6 -FreeBSD= -test "$nxconf_cv_freebsd" = yes && FreeBSD=yes - - -if test "$CYGWIN32" != yes -a "$DARWIN" != yes; then - CXXFLAGS="$CXXFLAGS -fPIC" - CFLAGS="$CFLAGS -fPIC" -fi - - -if test "$SUN" = yes; then - LIBS="$LIBS -L/usr/sfw/lib -lsocket " - CXXFLAGS="$CXXFLAGS -I/usr/sfw/include" -fi - - -if test "$FreeBSD" = yes; then - LIBS="$LIBS -L/usr/local/lib" - CXXFLAGS="$CXXFLAGS -I/usr/local/include" -fi - - -if test "$DARWIN" = yes; then - LDFLAGS="$LDFLAGS -bundle" -elif test "$SUN" = yes; then - LDFLAGS="$LDFLAGS -G -h \$(LIBLOAD)" -else - LDFLAGS="$LDFLAGS -Wl,-soname,\$(LIBLOAD)" -fi - - - -echo "$as_me:$LINENO: checking for in_addr_t" >&5 -echo $ECHO_N "checking for in_addr_t... $ECHO_C" >&6 -if test "${nxconf_cv_inaddrt+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <netinet/in.h> -int -main () -{ -in_addr_t t; t = 1; return t; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - nxconf_cv_inaddrt=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -nxconf_cv_inaddrt=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -rm -f conftest* -fi -echo "$as_me:$LINENO: result: $nxconf_cv_inaddrt" >&5 -echo "${ECHO_T}$nxconf_cv_inaddrt" >&6 -INADDRT= -test "$nxconf_cv_inaddrt" = yes && INADDRT=yes - - -if test "$INADDRT" != yes ; then - echo -e "using unsigned int for type in_addr_t" - CXXFLAGS="$CXXFLAGS -DIN_ADDR_T=unsigned" - CPPFLAGS="$CPPFLAGS -DIN_ADDR_T=unsigned" -else - CXXFLAGS="$CXXFLAGS -DIN_ADDR_T=in_addr_t" - CPPFLAGS="$CPPFLAGS -DIN_ADDR_T=in_addr_t" -fi - - - - -if test "${with_version}" = yes; then - VERSION=${ac_option} -else - VERSION=`cat VERSION` -fi -echo -e "compiling version ${VERSION}" - -LIBVERSION=`echo ${VERSION} | cut -d '.' -f 1` - -CXXFLAGS="$CXXFLAGS -DVERSION=\\\"${VERSION}\\\"" -CPPFLAGS="$CPPFLAGS -DVERSION=\\\"${VERSION}\\\"" - - -if test "$DARWIN" = yes ; then - LIBS="$LIBS $LIBSTATIC $LIBSHARED" -elif test "$SUN" = yes ; then - LIBS="$LIBS $LIBSTATIC $LIBSHARED" -else - LIBS="$LIBS $LIBSTATIC -shared $LIBSHARED" -fi - - -if test "${with_symbols}" = yes; then - echo -e "enabling production of debug symbols" - CXXFLAGS="-g $CXXFLAGS" - CPPFLAGS="-g $CPPFLAGS" -else - echo -e "disabling production of debug symbols" -fi - - -if test "${with_info}" = yes; then - echo -e "enabling info output in the log file" - CXXFLAGS="$CXXFLAGS -DINFO" - CPPFLAGS="$CPPFLAGS -DINFO" -else - echo -e "disabling info output in the log file" -fi - - -if test "${with_valgrind}" = yes; then - echo -e "enabling valgrind memory checker workarounds" - CXXFLAGS="$CXXFLAGS -DVALGRIND" - CPPFLAGS="$CPPFLAGS -DVALGRIND" -else - echo -e "disabling valgrind memory checker workarounds" -fi - - - - -if test -x "../nx-X11/config/makedepend/makedepend" ; then - MAKEDEPEND=../nx-X11/config/makedepend/makedepend -else - if test -x "/usr/X11R6/bin/makedepend" ; then - MAKEDEPEND=/usr/X11R6/bin/makedepend - else - if test -x "/usr/openwin/bin/makedepend" ; then - MAKEDEPEND=/usr/openwin/bin/makedepend - else - MAKEDEPEND=makedepend - fi - fi -fi - - ac_config_files="$ac_config_files Makefile" -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -{ - (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1='\\2'/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1=\\2/p" - ;; - esac; -} | - sed ' - t clear - : clear - s/^$[^=]*$=$.*[{}].*$$/test "${\1+set}" = set || &/ - t end - /^ac_cv_env/!s/^$[^=]*$=$.*$$/\1=${\1=\2}/ - : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" - cat confcache >$cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/; -s/:*\${srcdir}:*/:/; -s/:*@srcdir@:*/:/; -s/^$[^=]*=[ ]*$:*/\1/; -s/:*$//; -s/^[^=]*=[ ]*$//; -}' -fi - -# Transform confdefs.h into DEFS. -# Protect against shell expansion while executing Makefile rules. -# Protect against Makefile macro expansion. -# -# If the first sed substitution is executed (which looks for macros that -# take arguments), then we branch to the quote section. Otherwise, -# look for a macro that doesn't take arguments. -cat >confdef2opt.sed <<\_ACEOF -t clear -: clear -s,^[ ]*#[ ]*define[ ][ ]*$[^ (][^ (]*([^)]*)$[ ]*$.*$,-D\1=\2,g -t quote -s,^[ ]*#[ ]*define[ ][ ]*$[^ ][^ ]*$[ ]*$.*$,-D\1=\2,g -t quote -d -: quote -s,[ `~#$^&*(){}\\|;'"<>?],\\&,g -s,\[,\\&,g -s,\],\\&,g -s,\$,$$,g -p -_ACEOF -# We use echo to avoid assuming a particular line-breaking character. -# The extra dot is to prevent the shell from consuming trailing -# line-breaks from the sub-command output. A line-break within -# single-quotes doesn't work because, if this script is created in a -# platform that uses two characters for line-breaks (e.g., DOS), tr -# would break. -ac_LF_and_DOT=`echo; echo .` -DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` -rm -f confdef2opt.sed - - -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_i=`echo "$ac_i" | - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - -: ${CONFIG_STATUS=./config.status} -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi -DUALCASE=1; export DUALCASE # for MKS sh - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '$a$' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename "$0" || -$as_expr X/"$0" : '.*/$[^/][^/]*$/*$' \| \ - X"$0" : 'X$//$$' \| \ - X"$0" : 'X$/$$' \| \ - . : '$.$' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/$[^/][^/]*$\/*$/{ s//\1/; q; } - /^X\/$\/\/$$/{ s//\1/; q; } - /^X\/$\/$.*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^$['$as_cr_digits']*$$.*$[$]LINENO$[^'$as_cr_alnum'_]$,\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '$a$' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - -exec 6>&1 - -# Open the log real soon, to keep \$[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. Logging --version etc. is OK. -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX -} >&5 -cat >&5 <<_CSEOF - -This file was extended by $as_me, which was -generated by GNU Autoconf 2.59. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -_CSEOF -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 -echo >&5 -_ACEOF - -# Files that config.status was made for. -if test -n "$ac_config_files"; then - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_headers"; then - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_links"; then - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_commands"; then - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS -fi - -cat >>$CONFIG_STATUS <<\_ACEOF - -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. - -Usage: $0 [OPTIONS] [FILE]... - - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - -Configuration files: -$config_files - -Report bugs to <bug-autoconf(a)gnu.org>." -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF -ac_cs_version="\\ -config.status -configured by $0, generated by GNU Autoconf 2.59, - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" - -Copyright (C) 2003 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." -srcdir=$srcdir -INSTALL="$INSTALL" -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "x$1" : 'x$[^=]*$='` - ac_optarg=`expr "x$1" : 'x[^=]*=$.*$'` - ac_shift=: - ;; - -*) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - *) # This is not an option, so the user has probably given explicit - # arguments. - ac_option=$1 - ac_need_defaults=false;; - esac - - case $ac_option in - # Handling of the options. -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --vers* | -V ) - echo "$ac_cs_version"; exit 0 ;; - --he | --h) - # Conflict between --help and --header - { { echo "$as_me:$LINENO: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" - ac_need_defaults=false;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; } ;; - - *) ac_config_targets="$ac_config_targets $1" ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -if \$ac_cs_recheck; then - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -fi - -_ACEOF - - - - - -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_config_target in $ac_config_targets -do - case "$ac_config_target" in - # Handling of arguments. - "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason to put it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Create a temporary directory, and hook for its removal unless debugging. -$debug || -{ - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} - -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./confstat$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} - -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF - -# -# CONFIG_FILES section. -# - -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "\$CONFIG_FILES"; then - # Protect against being on the right side of a sed subst in config.status. - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF -s,@SHELL@,$SHELL,;t t -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t -s,@exec_prefix@,$exec_prefix,;t t -s,@prefix@,$prefix,;t t -s,@program_transform_name@,$program_transform_name,;t t -s,@bindir@,$bindir,;t t -s,@sbindir@,$sbindir,;t t -s,@libexecdir@,$libexecdir,;t t -s,@datadir@,$datadir,;t t -s,@sysconfdir@,$sysconfdir,;t t -s,@sharedstatedir@,$sharedstatedir,;t t -s,@localstatedir@,$localstatedir,;t t -s,@libdir@,$libdir,;t t -s,@includedir@,$includedir,;t t -s,@oldincludedir@,$oldincludedir,;t t -s,@infodir@,$infodir,;t t -s,@mandir@,$mandir,;t t -s,@build_alias@,$build_alias,;t t -s,@host_alias@,$host_alias,;t t -s,@target_alias@,$target_alias,;t t -s,@DEFS@,$DEFS,;t t -s,@ECHO_C@,$ECHO_C,;t t -s,@ECHO_N@,$ECHO_N,;t t -s,@ECHO_T@,$ECHO_T,;t t -s,@LIBS@,$LIBS,;t t -s,@armcxx@,$armcxx,;t t -s,@armcc@,$armcc,;t t -s,@CXX@,$CXX,;t t -s,@CXXFLAGS@,$CXXFLAGS,;t t -s,@LDFLAGS@,$LDFLAGS,;t t -s,@CPPFLAGS@,$CPPFLAGS,;t t -s,@ac_ct_CXX@,$ac_ct_CXX,;t t -s,@EXEEXT@,$EXEEXT,;t t -s,@OBJEXT@,$OBJEXT,;t t -s,@CC@,$CC,;t t -s,@CFLAGS@,$CFLAGS,;t t -s,@ac_ct_CC@,$ac_ct_CC,;t t -s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t -s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t -s,@INSTALL_DATA@,$INSTALL_DATA,;t t -s,@CXXCPP@,$CXXCPP,;t t -s,@X_CFLAGS@,$X_CFLAGS,;t t -s,@X_PRE_LIBS@,$X_PRE_LIBS,;t t -s,@X_LIBS@,$X_LIBS,;t t -s,@X_EXTRA_LIBS@,$X_EXTRA_LIBS,;t t -s,@LIBVERSION@,$LIBVERSION,;t t -s,@VERSION@,$VERSION,;t t -s,@MAKEDEPEND@,$MAKEDEPEND,;t t -s,@LIBOBJS@,$LIBOBJS,;t t -s,@LTLIBOBJS@,$LTLIBOBJS,;t t -CEOF - -_ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF - # Split the substitutions into bite-sized pieces for seds with - # small command number limits, like on Digital OSF/1 and HP-UX. - ac_max_sed_lines=48 - ac_sed_frag=1 # Number of current file. - ac_beg=1 # First line for current file. - ac_end=$ac_max_sed_lines # Line after last line for current file. - ac_more_lines=: - ac_sed_cmds= - while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - else - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - fi - if test ! -s $tmp/subs.frag; then - ac_more_lines=false - else - # The purpose of the label and of the branching condition is to - # speed up the sed processing (if there are no `@' at all, there - # is no need to browse any of the substitutions). - # These are the two extra sed commands mentioned above. - (echo ':t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" - else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" - fi - ac_sed_frag=`expr $ac_sed_frag + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_lines` - fi - done - if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat - fi -fi # test -n "$CONFIG_FILES" - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac - - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. - ac_dir=`(dirname "$ac_file") 2>/dev/null || -$as_expr X"$ac_file" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X$//$[^/]' \| \ - X"$ac_file" : 'X$//$$' \| \ - X"$ac_file" : 'X$/$' \| \ - . : '$.$' 2>/dev/null || -echo X"$ac_file" | - sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X$\/\/$[^/].*/{ s//\1/; q; } - /^X$\/\/$$/{ s//\1/; q; } - /^X$\/$.*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X$//$[^/]' \| \ - X"$as_dir" : 'X$//$$' \| \ - X"$as_dir" : 'X$/$' \| \ - . : '$.$' 2>/dev/null || -echo X"$as_dir" | - sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X$\/\/$[^/].*/{ s//\1/; q; } - /^X$\/\/$$/{ s//\1/; q; } - /^X$\/$.*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac - - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_builddir$INSTALL ;; - esac - - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - configure_input= - else - configure_input="$ac_file. " - fi - configure_input=$configure_input"Generated from `echo $ac_file_in | - sed 's,.*/,,'` by configure." - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo "$f";; - *) # Relative - if test -f "$f"; then - # Build tree - echo "$f" - elif test -f "$srcdir/$f"; then - # Source tree - echo "$srcdir/$f" - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@configure_input@,$configure_input,;t t -s,@srcdir@,$ac_srcdir,;t t -s,@abs_srcdir@,$ac_abs_srcdir,;t t -s,@top_srcdir@,$ac_top_srcdir,;t t -s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t -s,@builddir@,$ac_builddir,;t t -s,@abs_builddir@,$ac_abs_builddir,;t t -s,@top_builddir@,$ac_top_builddir,;t t -s,@abs_top_builddir@,$ac_abs_top_builddir,;t t -s,@INSTALL@,$ac_INSTALL,;t t -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out - rm -f $tmp/stdin - if test x"$ac_file" != x-; then - mv $tmp/out $ac_file - else - cat $tmp/out - rm -f $tmp/out - fi - -done -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF - -{ (exit 0); exit 0; } -_ACEOF -chmod +x $CONFIG_STATUS -ac_clean_files=$ac_clean_files_save - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } -fi - diff --git a/configure.in b/configure.in index 3f16ee9..0090929 100644 --- a/configure.in +++ b/configure.in @@ -5,11 +5,6 @@ dnl Prolog AC_INIT(Shadow.h) AC_PREREQ(2.13) -dnl Reset default compilation flags. - -CXXFLAGS="-O3" -CPPFLAGS="-O3" - dnl Reset default linking directives. LIBSTATIC="" @@ -17,9 +12,9 @@ LIBSHARED="" dnl Prefer headers and libraries from nx-X11, if present. -if test -d "../nx-X11/exports/include" ; then - CXXFLAGS="$CXXFLAGS -I../nx-X11/exports/include" - LIBS="$LIBS -L../nx-X11/exports/lib" +if test -d "/usr/include/nx" ; then + CXXFLAGS="$CXXFLAGS -I/usr/include/nx" + LIBS="$LIBS -L/usr/lib/nx" fi dnl Check whether --with-ipaq was given. diff --git a/debian/changelog b/debian/changelog index ec0cb41..c38e830 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,16 @@ +nxcompshad (3.4.0.4-0~x2go1) unstable; urgency=low + + * New upstream version (accepted debian patches) + - debian/patches/01_system_wide_build.patch + - debian/patches/cflags.patch + - debian/patches/nxcompshad-3.2.0-gcc43.patch + - debian/patches/nxcompshad-3.3.0-Xext.patch + - debian/patches/series + - adds make install/uninstall functionality + * lintian cleanup + + -- Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Thu, 19 May 2011 12:44:14 +0200 + nxcompshad (3.4.0.3-0~x2go1) unstable; urgency=low * changed version number scheme, upstream now maintained by X2go project diff --git a/debian/changelog.revu b/debian/changelog.revu deleted file mode 100644 index f940f47..0000000 --- a/debian/changelog.revu +++ /dev/null @@ -1,5 +0,0 @@ -nxcompshad (3.3.0-3-0ubuntu1) jaunty; urgency=low - - * Initial release. (LP: #252755) - - -- Marcelo Boveto Shima <marceloshima(a)gmail.com> Thu, 22 Jan 2009 23:55:26 -0200 diff --git a/debian/control b/debian/control index 3a8afff..5f45586 100644 --- a/debian/control +++ b/debian/control @@ -1,10 +1,20 @@ Source: nxcompshad Priority: extra -Maintainer: Ubuntu MOTU Developers <ubuntu-motu(a)lists.ubuntu.com> -Build-Depends: debhelper (>= 7), quilt, libxtst-dev, - libxdamage-dev, libxrandr-dev, automake, libxi-dev -Standards-Version: 3.8.3 +Maintainer: Oleksandr Shneyder <oleksandr.shneyder(a)obviously-nice.de> +Uploaders: + Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> +Build-Depends: + debhelper (>= 7.0.50), + libxtst-dev, + libxdamage-dev, + libxrandr-dev, + automake, + libxi-dev Section: x11 +Standards-Version: 3.9.2 +Homepage: http://code.x2go.org/releases/source/nxcompshad +Vcs-Git: git://code.x2go.org/nxcompshad.git +Vcs-Browser: http://code.x2go.org/gitweb?p=nxcompshad.git;a=summary Package: libxcompshad3 Section: x11 diff --git a/debian/patches/01_system_wide_build.patch b/debian/patches/01_system_wide_build.patch deleted file mode 100644 index 39f7ceb..0000000 --- a/debian/patches/01_system_wide_build.patch +++ /dev/null @@ -1,22 +0,0 @@ -Title: Include headers from system directory -DEP: 3 -State: CANDIDATE -Abstract: - Include headers from system directory - -diff -urNad nxcompshad~/configure.in nxcompshad/configure.in ---- nxcompshad~/configure.in 2007-06-04 13:39:49.000000000 +0200 -+++ nxcompshad/configure.in 2008-06-18 10:00:00.000000000 +0200 -@@ -17,9 +17,9 @@ - - dnl Prefer headers and libraries from nx-X11, if present. - --if test -d "../nx-X11/exports/include" ; then -- CXXFLAGS="$CXXFLAGS -I../nx-X11/exports/include" -- LIBS="$LIBS -L../nx-X11/exports/lib" -+if test -d "/usr/include/nx" ; then -+ CXXFLAGS="$CXXFLAGS -I/usr/include/nx" -+ LIBS="$LIBS -L/usr/lib/nx" - fi - - dnl Check whether --with-ipaq was given. diff --git a/debian/patches/cflags.patch b/debian/patches/cflags.patch deleted file mode 100644 index 3dcf4ba..0000000 --- a/debian/patches/cflags.patch +++ /dev/null @@ -1,21 +0,0 @@ -Title: Remove hardcoded O3 compiler flag -DEP: 3 -State: CANDIDATE -Date: 2009-12-19 -Abstract: - Remove hardcoded O3 compiler flag - ---- nxcompshad/configure.in.orig 2008-12-18 15:56:13.000000000 +0100 -+++ nxcompshad/configure.in 2008-12-18 15:56:22.000000000 +0100 -@@ -5,11 +5,6 @@ - AC_INIT(Shadow.h) - AC_PREREQ(2.13) - --dnl Reset default compilation flags. -- --CXXFLAGS="-O3" --CPPFLAGS="-O3" -- - dnl Reset default linking directives. - - LIBSTATIC="" diff --git a/debian/patches/nxcompshad-3.2.0-gcc43.patch b/debian/patches/nxcompshad-3.2.0-gcc43.patch deleted file mode 100644 index e5a2c93..0000000 --- a/debian/patches/nxcompshad-3.2.0-gcc43.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- nxcompshad/Misc.h.orig 2008-07-21 18:27:41 +0400 -+++ nxcompshad/Misc.h 2008-07-21 18:31:17 +0400 -@@ -20,8 +20,8 @@ - - #include <iostream> - --#include <errno.h> --#include <string.h> -+#include <cerrno> -+#include <cstring> - - using namespace std; - diff --git a/debian/patches/nxcompshad-3.3.0-Xext.patch b/debian/patches/nxcompshad-3.3.0-Xext.patch deleted file mode 100644 index 109619e..0000000 --- a/debian/patches/nxcompshad-3.3.0-Xext.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- nxcompshad/Makefile.in.orig 2008-12-05 13:57:18 +0300 -+++ nxcompshad/Makefile.in 2008-12-05 13:57:05 +0300 -@@ -48,7 +48,7 @@ CCINCLUDES = - CCDEFINES = - - LDFLAGS = @LDFLAGS@ --LIBS = @LIBS@ -L/usr/X11R6/lib -lX11 -+LIBS = @LIBS@ -L/usr/X11R6/lib -lX11 -lXext - - # - # Only if THREADS is defined. diff --git a/debian/patches/series b/debian/patches/series deleted file mode 100644 index 3ad6ddf..0000000 --- a/debian/patches/series +++ /dev/null @@ -1,4 +0,0 @@ -nxcompshad-3.2.0-gcc43.patch -nxcompshad-3.3.0-Xext.patch -cflags.patch -01_system_wide_build.patch diff --git a/debian/rules b/debian/rules index 5fb3e8c..9f06a51 100755 --- a/debian/rules +++ b/debian/rules @@ -1,16 +1,7 @@ #!/usr/bin/make -f -include /usr/share/quilt/quilt.make - %: - dh $@ - -build: $(QUILT_STAMPFN) -clean: unpatch + dh --with autoreconf --parallel $@ -#clean:: -# [ ! -f Makefile ] || $(MAKE) distclean -# [ ! -f aclocal.m4 ] || rm aclocal.m4 -# [ ! -f configure ] || rm configure -# [ ! -f changelog ] || rm changelog +override_dh_auto_install: diff --git a/debian/watch b/debian/watch deleted file mode 100644 index 43e2e52..0000000 --- a/debian/watch +++ /dev/null @@ -1,3 +0,0 @@ -version=3 -http://www.nomachine.com/sources.php \ - http://[^"]*/nxcompshad-([\d\.-]*)\.tar\.gz hooks/post-receive -- nxcompshad.git (NX compshad library) This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "nxcompshad.git" (NX compshad library).

1 0

nxcompext.git - build-main (branch) updated: 3.4.0.2
by git-admin＠x2go.org 30 Jun '11

30 Jun '11

The branch, build-main has been updated via 758ea1363e435d984ed6d5f077167c3ef64b56f5 (commit) via dc779737f4b3875ff44b926b2594a225f0ac3315 (commit) via 2f33cbe55444454e2f9dd027fb4935bde2a2aab5 (commit) via 53cb96ae13257be8c72adcbf0f57d61dc0f804b8 (commit) via 33986114ce01bbae8b53ac5b66737177bd654615 (commit) via 927bc68ab611e20f3c77960b04f5626b792736c7 (commit) via b9c3fcb5c868acf809ac602658642ea801aefaf5 (commit) from a67589dd46c54cbfaefb228c195a742367b5aa27 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- ----------------------------------------------------------------------- Summary of changes: CHANGELOG | 4 ++++ INSTALL | 32 ++++++++++++++++++++++++++++++++ Makefile.in | 25 +++++++++++++++++++++++-- VERSION | 2 +- debian/changelog | 11 ++++++++++- debian/control | 15 ++++++++++----- debian/rules | 1 + debian/watch | 3 --- 8 files changed, 81 insertions(+), 12 deletions(-) create mode 100644 INSTALL delete mode 100644 debian/watch The diff of changes is: diff --git a/CHANGELOG b/CHANGELOG index ea01770..de97f0a 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,5 +1,9 @@ ChangeLog: +nxcompext-3.4.0.2 + +- Adds make install/uninstall functionality + nxcompext-3.4.0.1 - Change of version numbering scheme, upstream code now maintained by X2go project diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..5440d6b --- /dev/null +++ b/INSTALL @@ -0,0 +1,32 @@ +Installing NX libs from Tarball +=============================== + +1. DOWNLOAD +----------- +Download NX lib tarball (nxcomp, nxcompext, nxcompshad) + +2. EXTRACTION +------------- +Extract the tarball + +$ tar vzxf nxcomp..._version.tar.gz + +3. BUILD +-------- +Run the following commands for building from source + +$ autoconf +$ ./configure +$ make + +4. INSTALL +---------- +For installation: + +$ sudo make install + +5. UNINSTALL +------------ +For deinstallation + +$ sudo make uninstall diff --git a/Makefile.in b/Makefile.in index f8b45f3..1325e88 100644 --- a/Makefile.in +++ b/Makefile.in @@ -62,7 +62,9 @@ VPATH = @srcdir@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ - +INSTALL_LINK = cp -av +DESTDIR = +RM_FILE = rm -f # # This should be autodetected. # @@ -149,12 +151,31 @@ depend.status: fi touch depend.status -install: install.bin install.man +install: install.bin install.lib install.man install.bin: +install.lib: all + $(INSTALL_DATA) libXcompext.so.* $(DESTDIR)$(prefix)/lib + $(INSTALL_LINK) libXcompext.so $(DESTDIR)$(prefix)/lib + $(INSTALL_DATA) NX*.h $(DESTDIR)$(prefix)/include + echo "Running ldconfig tool, this may take a while..." && ldconfig + install.man: +uninstall: uninstall.bin uninstall.lib uninstall.man + +uninstall.bin: + +uninstall.lib: + $(RM_FILE) $(DESTDIR)$(prefix)/lib/libXcompext.so.* + $(RM_FILE) $(DESTDIR)$(prefix)/lib/libXcompext.so + $(RM_FILE) $(DESTDIR)$(prefix)/include/NXlib.h + $(RM_FILE) $(DESTDIR)$(prefix)/include/NXlibint.h + echo "Running ldconfig tool, this may take a while..." && ldconfig + +uninstall.man: + clean: -rm -f *~ *.o *.bak *.orig *.rej st?????? core core.* *.out.* \ @ALL@ diff --git a/VERSION b/VERSION index 3c6bd15..261f9ad 100644 --- a/VERSION +++ b/VERSION @@ -1,2 +1,2 @@ -3.4.0.1 +3.4.0.2 diff --git a/debian/changelog b/debian/changelog index d0a6555..7df16f0 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,6 +1,15 @@ +nxcompext (1:3.4.0.2-0~x2go1) unstable; urgency=low + + * new upstream version: + - adds make install/uninstall functionality + * lintian cleanup + + -- Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Thu, 19 May 2011 11:59:38 +0200 + nxcompext (1:3.4.0.1-0~x2go1) unstable; urgency=low - * Change of version numbering scheme, upstream code now maintained by X2go project + * Change of version numbering scheme, upstream code now + maintained by X2go project -- Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Mon, 21 Mar 2011 12:58:12 +0100 diff --git a/debian/control b/debian/control index 93fd056..01aca75 100644 --- a/debian/control +++ b/debian/control @@ -1,11 +1,12 @@ Source: nxcompext -Maintainer: Ubuntu MOTU Developers <ubuntu-motu(a)lists.ubuntu.com> -Section: universe/x11 +Maintainer: Oleksandr Shneyder <oleksandr.shneyder(a)obviously-nice.de> +Uploaders: + Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> +Section: x11 Priority: optional -Standards-Version: 3.8.4 Build-Depends: dh-autoreconf, - debhelper (>= 7), + debhelper (>= 7.0.50), libjpeg-dev, libpng-dev, libx11-dev, @@ -13,6 +14,10 @@ Build-Depends: libz-dev, pkg-config, xserver-xorg-dev +Standards-Version: 3.9.2 +Homepage: http://code.x2go.org/releases/source/nxcompext +Vcs-Git: git://code.x2go.org/nxcompext.git +Vcs-Browser: http://code.x2go.org/gitweb?p=nxcompext.git;a=summary Package: libxcompext3 Architecture: any @@ -29,7 +34,7 @@ Description: NX X11 protocol compression extensions library Package: libxcompext-dev Architecture: any Priority: extra -Section: universe/libdevel +Section: libdevel Depends: libxcompext3 (=${binary:Version}), ${misc:Depends}, diff --git a/debian/rules b/debian/rules index 39729d4..45bc4c7 100755 --- a/debian/rules +++ b/debian/rules @@ -3,3 +3,4 @@ %: dh --with autoreconf --parallel $@ +override_dh_auto_install: \ No newline at end of file diff --git a/debian/watch b/debian/watch deleted file mode 100644 index 6788363..0000000 --- a/debian/watch +++ /dev/null @@ -1,3 +0,0 @@ -version=3 -http://www.nomachine.com/sources.php \ - http://[^"]*/nxcompext-([\d\.-]*)\.tar\.gz hooks/post-receive -- nxcompext.git (NX compext library) This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "nxcompext.git" (NX compext library).

1 0

nxcomp.git - build-main (branch) updated: 3.4.0.8
by git-admin＠x2go.org 30 Jun '11

30 Jun '11

The branch, build-main has been updated via f5184235e876daa03239e0ae792cea8569f1dcfc (commit) via 646d5956c3d7086ec1413f02dbd071e68c05bb2d (commit) via e68eb741185043be2d9b01439285f105d1c3227e (commit) via d19f310b0b37fa8088961fc07738fd39e5a4d2a9 (commit) via 8d45c2a3ede4c862d773e4cde460f8116df05d4c (commit) via 1a490a3606d69ba0cfa00e9d79b40e63943f0734 (commit) via 597dc35e6d0fc7ef22785d729fd7e0078db9e94e (commit) via 33eccd6a4ae8ab482cda7aafd93d776765f56501 (commit) via 16c5796c42d48192879cfc2d265068580128e354 (commit) via 271f827aeade9fcaf65ee392180c073bba7bcfb0 (commit) via ed9b0b89b569b96212aa4da0788c0db7ad23d5d4 (commit) via 41ee6fd4a7663a38b3869e85cb8dedd86a801ef4 (commit) via 03aafc0e3e7c63e29057cde6c2472da9411f4164 (commit) from 602cae506bec57b4ee86fc5ffa884cfba4c90c46 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- ----------------------------------------------------------------------- Summary of changes: CHANGELOG | 4 ++++ INSTALL | 32 ++++++++++++++++++++++++++++++++ Loop.cpp | 4 ++-- Makefile.in | 35 ++++++++++++++++++++++++++++++++++- VERSION | 2 +- debian/changelog | 10 ++++++++++ debian/control | 18 ++++++++++-------- debian/rules | 1 + debian/watch | 3 --- 9 files changed, 94 insertions(+), 15 deletions(-) create mode 100644 INSTALL delete mode 100644 debian/watch The diff of changes is: diff --git a/CHANGELOG b/CHANGELOG index 1995dd7..bc6adb3 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,5 +1,9 @@ ChangeLog: +nxcomp-3.4.0.8 + +- Providing make install/uninstall functionality + nxcomp-3.4.0.7 - Change of version numbering scheme, upstream maintained by X2go project now diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..5440d6b --- /dev/null +++ b/INSTALL @@ -0,0 +1,32 @@ +Installing NX libs from Tarball +=============================== + +1. DOWNLOAD +----------- +Download NX lib tarball (nxcomp, nxcompext, nxcompshad) + +2. EXTRACTION +------------- +Extract the tarball + +$ tar vzxf nxcomp..._version.tar.gz + +3. BUILD +-------- +Run the following commands for building from source + +$ autoconf +$ ./configure +$ make + +4. INSTALL +---------- +For installation: + +$ sudo make install + +5. UNINSTALL +------------ +For deinstallation + +$ sudo make uninstall diff --git a/Loop.cpp b/Loop.cpp index 92b6fc2..ba54d38 100644 --- a/Loop.cpp +++ b/Loop.cpp @@ -5895,7 +5895,7 @@ void InstallSignal(int signal, int action) #if defined(__linux__) - newAction.sa_restorer = NULL; + memset(&newAction, NULL, sizeof(newAction)); #endif @@ -6513,7 +6513,7 @@ void SetTimer(int value) #if defined(__linux__) - action.sa_restorer = NULL; + memset(&action, NULL, sizeof(action)); #endif diff --git a/Makefile.in b/Makefile.in index 434118b..b86a816 100644 --- a/Makefile.in +++ b/Makefile.in @@ -68,6 +68,9 @@ VPATH = @srcdir@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ +INSTALL_LINK = cp -av +DESTDIR = +RM_FILE = rm -f # # This should be autodetected. @@ -264,12 +267,42 @@ depend.status: fi touch depend.status -install: install.bin install.man +install: install.bin install.lib install.man install.bin: +install.lib: all + $(INSTALL_DATA) libXcomp.so.3.* $(DESTDIR)$(prefix)/lib + $(INSTALL_LINK) libXcomp.so.3 $(DESTDIR)$(prefix)/lib + $(INSTALL_LINK) libXcomp.so $(DESTDIR)$(prefix)/lib + $(INSTALL_DATA) libXcomp.a $(DESTDIR)$(prefix)/lib + $(INSTALL_DATA) NX*.h $(DESTDIR)$(prefix)/include + $(INSTALL_DATA) MD5.h $(DESTDIR)$(prefix)/include + echo "Running ldconfig tool, this may take a while..." && ldconfig + install.man: +uninstall: uninstall.bin uninstall.lib uninstall.man + +uninstall.bin: + +uninstall.lib: + $(RM_FILE) $(DESTDIR)$(prefix)/lib/libXcomp.so.3.* + $(RM_FILE) $(DESTDIR)$(prefix)/lib/libXcomp.so.3 + $(RM_FILE) $(DESTDIR)$(prefix)/lib/libXcomp.so + $(RM_FILE) $(DESTDIR)$(prefix)/lib/libXcomp.a + $(RM_FILE) $(DESTDIR)$(prefix)/include/NXalert.h + $(RM_FILE) $(DESTDIR)$(prefix)/include/NX.h + $(RM_FILE) $(DESTDIR)$(prefix)/include/NXmitshm.h + $(RM_FILE) $(DESTDIR)$(prefix)/include/NXpack.h + $(RM_FILE) $(DESTDIR)$(prefix)/include/NXproto.h + $(RM_FILE) $(DESTDIR)$(prefix)/include/NXrender.h + $(RM_FILE) $(DESTDIR)$(prefix)/include/NXvars.h + $(RM_FILE) $(DESTDIR)$(prefix)/include/MD5.h + echo "Running ldconfig tool, this may take a while..." && ldconfig + +uninstall.man: + clean: -rm -f *~ *.o *.bak *.orig *.rej st?????? core core.* *.out.* \ @ALL@ diff --git a/VERSION b/VERSION index faf9574..ffc9bea 100644 --- a/VERSION +++ b/VERSION @@ -1 +1 @@ -3.4.0.7 +3.4.0.8 diff --git a/debian/changelog b/debian/changelog index 8282230..1aa52c3 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,13 @@ +nxcomp (3.4.0.8-0~x2go1) unstable; urgency=low + + * New upstream version: + - providing make install/uninstall functionlity + * lintian issue cleanup + * apply Debian's sa_restorer patch + * drop build-dep on libstdc++-dev (virtual only and not necessary) + + -- Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Mon, 23 May 2011 21:01:42 +0200 + nxcomp (3.4.0.7-0~x2go1) unstable; urgency=low * Change of version numbering scheme, code maintained by X2go project now diff --git a/debian/control b/debian/control index 1611f7a..83f2d63 100644 --- a/debian/control +++ b/debian/control @@ -1,22 +1,24 @@ Source: nxcomp +Section: x11 Priority: optional -Maintainer: Ubuntu MOTU Developers <ubuntu-motu(a)lists.ubuntu.com> -XSBC-Original-Maintainer: Matthew Johnson <mjj29(a)debian.org> +Maintainer: Oleksandr Shneyder <oleksandr.shneyder(a)obviously-nice.de> +Uploaders: + Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Build-Depends: autoconf, automake, dh-autoreconf, - debhelper (>=7), + debhelper (>=7.0.50~), libjpeg-dev, libpng-dev, - libstdc++-dev, x11proto-core-dev, zlib1g-dev -Standards-Version: 3.8.4 -Section: x11 +Standards-Version: 3.9.2 +Homepage: http://code.x2go.org/releases/source/nxcomp +Vcs-Git: git://code.x2go.org/nxcomp.git +Vcs-Browser: http://code.x2go.org/gitweb?p=nxcomp.git;a=summary Package: libxcomp3 -Section: x11 Architecture: any Depends: ${shlibs:Depends}, @@ -32,7 +34,7 @@ Architecture: any Depends: libxcomp3 (= ${binary:Version}), ${misc:Depends} -Description: NX X compression library---headers +Description: NX X compression library-headers NX provides a differential X compression library for X11. . This package provides the compression library headers. diff --git a/debian/rules b/debian/rules index 0a0ce8b..922b9bc 100755 --- a/debian/rules +++ b/debian/rules @@ -3,3 +3,4 @@ %: dh --with autoreconf --parallel $@ +override_dh_auto_install: \ No newline at end of file diff --git a/debian/watch b/debian/watch deleted file mode 100644 index 75f2491..0000000 --- a/debian/watch +++ /dev/null @@ -1,3 +0,0 @@ -version=3 -http://www.nomachine.com/sources.php \ - http://[^"]*/nxcomp-([\d\.-]*)\.tar\.gz hooks/post-receive -- nxcomp.git (NX comp library) This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "nxcomp.git" (NX comp library).

1 0

x2gothinclient.git - build-main (branch) updated: 3331a0057c0ff4a967351911fd0e51c2d2be2d38
by git-admin＠x2go.org 30 Jun '11

30 Jun '11

The branch, build-main has been updated via 3331a0057c0ff4a967351911fd0e51c2d2be2d38 (commit) via 13467ff99ffe11ef1d106a636efdb72a0147bc2b (commit) via 31edbd9cdd5574432aafe788a47a439a5800accf (commit) via 3b08dec260d17a2983bbc0983bb175a9b60f3b3d (commit) via dbc9bdb36ddfd5ebab14cc07e89f74dc138a9bce (commit) via 92893bd0ac14c9b7d6288e50f64b450f3daed352 (commit) via 940ac2f46b3542afce98981209364860e9b0e47d (commit) via c6a592e5b42a72e76f30c9d48005ee3cad0e676f (commit) from 7241e5d56b095bd2986ae6d3ba45b93ab95ebb5b (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- ----------------------------------------------------------------------- Summary of changes: debian/changelog | 5 +++ x2gothinclient/sbin/x2gothinclientd | 32 +++++++++++++------- .../sbin/x2gothinclient_create | 10 ++---- x2gothinclientmanagement/sbin/x2gothinclient_shell | 4 ++ .../sbin/x2gothinclient_update | 3 +- .../sbin/x2gothinclient_upgrade | 19 ++++++++++-- .../share/tftpboot/x2go-tce.cfg | 4 +- 7 files changed, 54 insertions(+), 23 deletions(-) The diff of changes is: diff --git a/debian/changelog b/debian/changelog index fd63e63..d6df0d3 100644 --- a/debian/changelog +++ b/debian/changelog @@ -36,6 +36,11 @@ x2gothinclient (1.0.1.3-0~x2go1) UNRELEASED; urgency=low * More variable ($) escaping in x2gothinclient_* scripts. Fixes start-stop-daemon enable/disable code. * Reduce x2goclient CPU load from ~100% to ~0-1%. + * Boot TCE kernel with nomodeset boot option to avoid gCard incompatibilities + (Fb vs. Xorg). + * Move kernel/initrd symlinks after install rather than copying. + * Add detection of kernel upgrades to x2gothinclient_upgrade script. + * Adapt chroot file created by x2gothinclient_upgrade, escaping $-signs. -- Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Sat, 28 May 2011 12:04:34 +0200 diff --git a/x2gothinclient/sbin/x2gothinclientd b/x2gothinclient/sbin/x2gothinclientd index 62f6b2d..63e3984 100755 --- a/x2gothinclient/sbin/x2gothinclientd +++ b/x2gothinclient/sbin/x2gothinclientd @@ -20,6 +20,7 @@ use strict; +use IPC::Open3; sub catch_term { @@ -69,19 +70,18 @@ system("su x2goclient -c \". /etc/x2go/x2gothinclient_init\""); my $pid = fork(); if (not defined $pid) { - print "resources not avilable.\n"; + print "resources not avilable.\n"; } elsif ($pid != 0) { - open (F,">/var/run/x2gothinclient.pid"); - print F "$pid\n"; - close(F); + open (F,">/var/run/x2gothinclient.pid"); + print F "$pid\n"; + close(F); } elsif ($pid == 0 ) { # silence this daemon script completely... - close(STDIN); close(STDOUT); close(STDERR); @@ -91,21 +91,25 @@ elsif ($pid == 0 ) { # test if XServer is running, if not launch it... - if ( check_x() ==0) + if ( check_x() ==0 ) { - system("/usr/bin/Xorg -br&"); + system("/usr/bin/Xorg -br &"); } # test if pulseaudio is running, if not launch it... - if ( !check_pulse()) + if ( !check_pulse() ) { system("su - x2goclient -c \"DISPLAY=:0 pulseaudio -D -n -L 'module-native-protocol-tcp port=4713' -L 'module-esound-protocol-tcp port=16001' -L 'module-udev-detect'\""); } # test if x2goclient is running, if not launch it... - if ( !check_client()) + my $x2goclient_pid = 0; + if ( !check_client() ) { - qx(su - x2goclient -c \"export DISPLAY=:0; . /etc/x2go/x2gothinclient_start\"); + local *IN, *OUT, *ERR; + $x2goclient_pid = eval { + open3( \*IN, \*OUT, \*ERR, "su - x2goclient -c 'DISPLAY=:0 bash -c \"/etc/x2go/x2gothinclient_start &\"'"); + }; } # handle availability of the thinshutdown button GUI... @@ -119,7 +123,13 @@ elsif ($pid == 0 ) } if ( !$SHUTD && !$PROXY && $CLIENT) { - system("bash -c 'sleep 4; DISPLAY=:0 thinshutdown &'"); + system("sleep 4; DISPLAY=:0 thinshutdown &"); + } + + ## wait for x2goclient to finish + if ( check_client() ) + { + waitpid( $x2goclient_pid, 0 ); } } } diff --git a/x2gothinclientmanagement/sbin/x2gothinclient_create b/x2gothinclientmanagement/sbin/x2gothinclient_create index 5297530..594770e 100755 --- a/x2gothinclientmanagement/sbin/x2gothinclient_create +++ b/x2gothinclientmanagement/sbin/x2gothinclient_create @@ -126,11 +126,11 @@ chmod +x /sbin/start-stop-daemon [ \$? -eq 0 ] && apt-get install syslinux locales -y [ \$? -eq 0 ] && dpkg-reconfigure locales [ \$? -eq 0 ] && apt-get install linux-image-486 -y -[ \$? -eq 0 ] && cp /vmlinuz /vmlinuz.486 -[ \$? -eq 0 ] && cp /initrd.img /initrd.img.486 +[ \$? -eq 0 ] && mv /vmlinuz /vmlinuz.486 +[ \$? -eq 0 ] && mv /initrd.img /initrd.img.486 [ \$? -eq 0 ] && apt-get install linux-image-686 -y -[ \$? -eq 0 ] && cp /vmlinuz /vmlinuz.686 -[ \$? -eq 0 ] && cp /initrd.img /initrd.img.686 +[ \$? -eq 0 ] && mv /vmlinuz /vmlinuz.686 +[ \$? -eq 0 ] && mv /initrd.img /initrd.img.686 [ \$? -eq 0 ] && apt-get install x2gothinclient x2gocdmanager x2gosmartcardrules x2gousbmount -y # blacklist kernel modules @@ -175,7 +175,5 @@ rm -f $TC_CHROOT/etc/udev/rules.d/*-persistent-*.rules x2gothinclient_update -echo echo "X2go Thin Client creation has finished successfully." echo - diff --git a/x2gothinclientmanagement/sbin/x2gothinclient_shell b/x2gothinclientmanagement/sbin/x2gothinclient_shell index 19c19c5..2712320 100755 --- a/x2gothinclientmanagement/sbin/x2gothinclient_shell +++ b/x2gothinclientmanagement/sbin/x2gothinclient_shell @@ -80,6 +80,10 @@ chmod +x /sbin/start-stop-daemon umount -l /proc &> /dev/null umount -l /dev/pts &> /dev/null + +echo +echo "X2go Thin Client Shell has exited." +echo EOF chmod u+x "$TC_CHROOT/x2go_tce_shell.sh" chroot "$TC_CHROOT" /x2go_tce_shell.sh diff --git a/x2gothinclientmanagement/sbin/x2gothinclient_update b/x2gothinclientmanagement/sbin/x2gothinclient_update index d0e78bc..9c0d9f7 100755 --- a/x2gothinclientmanagement/sbin/x2gothinclient_update +++ b/x2gothinclientmanagement/sbin/x2gothinclient_update @@ -66,4 +66,5 @@ chmod a+rx "$TC_CHROOT/etc/x2go/x2gothinclient_start" cp -v "$TC_CONFIG/x2gothinclient_sessions" "$TC_CHROOT/etc/x2go/x2gothinclient_sessions" chmod a+rx "$TC_CHROOT/etc/x2go/x2gothinclient_sessions" -echo \ No newline at end of file +echo + diff --git a/x2gothinclientmanagement/sbin/x2gothinclient_upgrade b/x2gothinclientmanagement/sbin/x2gothinclient_upgrade index 6391d0f..2d01390 100755 --- a/x2gothinclientmanagement/sbin/x2gothinclient_upgrade +++ b/x2gothinclientmanagement/sbin/x2gothinclient_upgrade @@ -45,7 +45,7 @@ test -e "$TC_CHROOT" || { exit -2 } -cat > "$TC_CHROOT/x2go_tc_update.sh" <<EOF +cat > "$TC_CHROOT/x2go_tce_upgrade.sh" <<EOF #!/bin/bash mount /proc &> /dev/null mount /dev/pts &> /dev/null @@ -64,11 +64,24 @@ chmod +x /sbin/start-stop-daemon [ \$? -eq 0 ] && apt-get update [ \$? -eq 0 ] && apt-get upgrade +# check for kernel upgrades +for symlink in /vmlinuz /vmlinuz.old /initrd.img /initrd.img.old; do + if [ -h \$symlink ]; then + symlink_target=\$(ls -l "\$symlink" | awk '{print \$11}') + echo \$symlink_target | egrep ".*-486$" >/dev/null && mv \$symlink \${symlink/.old/}.486 + echo \$symlink_target | egrep ".*-686$" >/dev/null && mv \$symlink \${symlink/.old/}.686 + fi +done + # restore start-stop-daemon [ \$(stat --format '%s' /sbin/start-stop-daemon) -lt 200 ] && mv /sbin/start-stop-daemon.keep /sbin/start-stop-daemon umount -l /proc &> /dev/null umount -l /dev/pts &> /dev/null + +echo +echo "X2go Thin Client Shell upgrade has finished." +echo EOF -chmod u+x "$TC_CHROOT/x2go_tc_update.sh" -chroot "$TC_CHROOT" /x2go_tc_update.sh +chmod u+x "$TC_CHROOT/x2go_tce_upgrade.sh" +chroot "$TC_CHROOT" /x2go_tce_upgrade.sh diff --git a/x2gothinclientmanagement/share/tftpboot/x2go-tce.cfg b/x2gothinclientmanagement/share/tftpboot/x2go-tce.cfg index fce038d..4bec362 100644 --- a/x2gothinclientmanagement/share/tftpboot/x2go-tce.cfg +++ b/x2gothinclientmanagement/share/tftpboot/x2go-tce.cfg @@ -1,8 +1,8 @@ LABEL x2go-tce-686 MENU LABEL X2go ^Thin Client KERNEL vmlinuz.686 - APPEND initrd=initrd.img.686 nfsroot=/opt/x2gothinclient/chroot boot=nfs ro quiet + APPEND initrd=initrd.img.686 nfsroot=/opt/x2gothinclient/chroot boot=nfs ro quiet nomodeset LABEL x2go-tce-486 MENU LABEL X2go ^Thin Client (old hardware) KERNEL vmlinuz.486 - APPEND initrd=initrd.img.486 nfsroot=/opt/x2gothinclient/chroot boot=nfs ro quiet + APPEND initrd=initrd.img.486 nfsroot=/opt/x2gothinclient/chroot boot=nfs ro quiet nomodeset hooks/post-receive -- x2gothinclient.git (X2go Thin Client Environment) This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "x2gothinclient.git" (X2go Thin Client Environment).

1 0

x2gothinclient.git - master (branch) updated: 3331a0057c0ff4a967351911fd0e51c2d2be2d38
by git-admin＠x2go.org 29 Jun '11

29 Jun '11

The branch, master has been updated via 3331a0057c0ff4a967351911fd0e51c2d2be2d38 (commit) from 13467ff99ffe11ef1d106a636efdb72a0147bc2b (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 3331a0057c0ff4a967351911fd0e51c2d2be2d38 Author: Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Date: Wed Jun 29 21:37:45 2011 +0200 Adapt chroot file created by x2gothinclient_upgrade, escaping $-signs. ----------------------------------------------------------------------- Summary of changes: debian/changelog | 1 + .../sbin/x2gothinclient_upgrade | 14 +++++++------- 2 files changed, 8 insertions(+), 7 deletions(-) The diff of changes is: diff --git a/debian/changelog b/debian/changelog index 9a43961..d6df0d3 100644 --- a/debian/changelog +++ b/debian/changelog @@ -40,6 +40,7 @@ x2gothinclient (1.0.1.3-0~x2go1) UNRELEASED; urgency=low (Fb vs. Xorg). * Move kernel/initrd symlinks after install rather than copying. * Add detection of kernel upgrades to x2gothinclient_upgrade script. + * Adapt chroot file created by x2gothinclient_upgrade, escaping $-signs. -- Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Sat, 28 May 2011 12:04:34 +0200 diff --git a/x2gothinclientmanagement/sbin/x2gothinclient_upgrade b/x2gothinclientmanagement/sbin/x2gothinclient_upgrade index 3728dde..2d01390 100755 --- a/x2gothinclientmanagement/sbin/x2gothinclient_upgrade +++ b/x2gothinclientmanagement/sbin/x2gothinclient_upgrade @@ -45,7 +45,7 @@ test -e "$TC_CHROOT" || { exit -2 } -cat > "$TC_CHROOT/x2go_tc_update.sh" <<EOF +cat > "$TC_CHROOT/x2go_tce_upgrade.sh" <<EOF #!/bin/bash mount /proc &> /dev/null mount /dev/pts &> /dev/null @@ -66,10 +66,10 @@ chmod +x /sbin/start-stop-daemon # check for kernel upgrades for symlink in /vmlinuz /vmlinuz.old /initrd.img /initrd.img.old; do - if [ -h $symlink ]; then - symlink_target=$(ls -l "$symlink" | awk '{print $11}') - echo $symlink_target | egrep ".*-486$" >/dev/null && mv $symlink \${symlink/.old/}.486 - echo $symlink_target | egrep ".*-686$" >/dev/null && mv $symlink \${symlink/.old/}.686 + if [ -h \$symlink ]; then + symlink_target=\$(ls -l "\$symlink" | awk '{print \$11}') + echo \$symlink_target | egrep ".*-486$" >/dev/null && mv \$symlink \${symlink/.old/}.486 + echo \$symlink_target | egrep ".*-686$" >/dev/null && mv \$symlink \${symlink/.old/}.686 fi done @@ -83,5 +83,5 @@ echo echo "X2go Thin Client Shell upgrade has finished." echo EOF -chmod u+x "$TC_CHROOT/x2go_tc_update.sh" -chroot "$TC_CHROOT" /x2go_tc_update.sh +chmod u+x "$TC_CHROOT/x2go_tce_upgrade.sh" +chroot "$TC_CHROOT" /x2go_tce_upgrade.sh hooks/post-receive -- x2gothinclient.git (X2go Thin Client Environment) This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "x2gothinclient.git" (X2go Thin Client Environment).

1 0

x2gothinclient.git - master (branch) updated: 13467ff99ffe11ef1d106a636efdb72a0147bc2b
by git-admin＠x2go.org 29 Jun '11

29 Jun '11

The branch, master has been updated via 13467ff99ffe11ef1d106a636efdb72a0147bc2b (commit) via 31edbd9cdd5574432aafe788a47a439a5800accf (commit) from 3b08dec260d17a2983bbc0983bb175a9b60f3b3d (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 13467ff99ffe11ef1d106a636efdb72a0147bc2b Author: Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Date: Wed Jun 29 21:29:30 2011 +0200 output beautifications... commit 31edbd9cdd5574432aafe788a47a439a5800accf Author: Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Date: Wed Jun 29 21:27:58 2011 +0200 handle vmlinuz.old/initrd.img.old as well (in case 486 _and_ 686 kernel gets upgraded at the same time) ----------------------------------------------------------------------- Summary of changes: .../sbin/x2gothinclient_create | 1 - .../sbin/x2gothinclient_update | 3 +-- .../sbin/x2gothinclient_upgrade | 6 +++--- 3 files changed, 4 insertions(+), 6 deletions(-) The diff of changes is: diff --git a/x2gothinclientmanagement/sbin/x2gothinclient_create b/x2gothinclientmanagement/sbin/x2gothinclient_create index 39213ba..594770e 100755 --- a/x2gothinclientmanagement/sbin/x2gothinclient_create +++ b/x2gothinclientmanagement/sbin/x2gothinclient_create @@ -175,6 +175,5 @@ rm -f $TC_CHROOT/etc/udev/rules.d/*-persistent-*.rules x2gothinclient_update -echo echo "X2go Thin Client creation has finished successfully." echo diff --git a/x2gothinclientmanagement/sbin/x2gothinclient_update b/x2gothinclientmanagement/sbin/x2gothinclient_update index 4f65ffa..9c0d9f7 100755 --- a/x2gothinclientmanagement/sbin/x2gothinclient_update +++ b/x2gothinclientmanagement/sbin/x2gothinclient_update @@ -67,5 +67,4 @@ cp -v "$TC_CONFIG/x2gothinclient_sessions" "$TC_CHROOT/etc/x2go/x2gothinclient_s chmod a+rx "$TC_CHROOT/etc/x2go/x2gothinclient_sessions" echo -echo "X2go Thin Client configuration update complete." -echo \ No newline at end of file + diff --git a/x2gothinclientmanagement/sbin/x2gothinclient_upgrade b/x2gothinclientmanagement/sbin/x2gothinclient_upgrade index a15d851..3728dde 100755 --- a/x2gothinclientmanagement/sbin/x2gothinclient_upgrade +++ b/x2gothinclientmanagement/sbin/x2gothinclient_upgrade @@ -65,11 +65,11 @@ chmod +x /sbin/start-stop-daemon [ \$? -eq 0 ] && apt-get upgrade # check for kernel upgrades -for symlink in /vmlinuz /initrd.img; do +for symlink in /vmlinuz /vmlinuz.old /initrd.img /initrd.img.old; do if [ -h $symlink ]; then symlink_target=$(ls -l "$symlink" | awk '{print $11}') - echo $symlink_target | grep 486 >/dev/null && mv $symlink $symlink.486 - echo $symlink_target | grep 686 >/dev/null && mv $symlink $symlink.686 + echo $symlink_target | egrep ".*-486$" >/dev/null && mv $symlink \${symlink/.old/}.486 + echo $symlink_target | egrep ".*-686$" >/dev/null && mv $symlink \${symlink/.old/}.686 fi done hooks/post-receive -- x2gothinclient.git (X2go Thin Client Environment) This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "x2gothinclient.git" (X2go Thin Client Environment).

1 0

x2gothinclient.git - master (branch) updated: 3b08dec260d17a2983bbc0983bb175a9b60f3b3d
by git-admin＠x2go.org 29 Jun '11

29 Jun '11

The branch, master has been updated via 3b08dec260d17a2983bbc0983bb175a9b60f3b3d (commit) via dbc9bdb36ddfd5ebab14cc07e89f74dc138a9bce (commit) via 92893bd0ac14c9b7d6288e50f64b450f3daed352 (commit) from 940ac2f46b3542afce98981209364860e9b0e47d (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 3b08dec260d17a2983bbc0983bb175a9b60f3b3d Author: Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Date: Wed Jun 29 15:23:46 2011 +0200 Add detection of kernel upgrades to x2gothinclient_upgrade script. commit dbc9bdb36ddfd5ebab14cc07e89f74dc138a9bce Author: Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Date: Wed Jun 29 15:10:06 2011 +0200 Move kernel/initrd symlinks after install rather than copying. commit 92893bd0ac14c9b7d6288e50f64b450f3daed352 Author: Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Date: Wed Jun 29 15:09:11 2011 +0200 Some more verbosity... ----------------------------------------------------------------------- Summary of changes: debian/changelog | 2 ++ .../sbin/x2gothinclient_create | 9 ++++----- x2gothinclientmanagement/sbin/x2gothinclient_shell | 4 ++++ .../sbin/x2gothinclient_update | 2 ++ .../sbin/x2gothinclient_upgrade | 13 +++++++++++++ 5 files changed, 25 insertions(+), 5 deletions(-) The diff of changes is: diff --git a/debian/changelog b/debian/changelog index 7a854c5..9a43961 100644 --- a/debian/changelog +++ b/debian/changelog @@ -38,6 +38,8 @@ x2gothinclient (1.0.1.3-0~x2go1) UNRELEASED; urgency=low * Reduce x2goclient CPU load from ~100% to ~0-1%. * Boot TCE kernel with nomodeset boot option to avoid gCard incompatibilities (Fb vs. Xorg). + * Move kernel/initrd symlinks after install rather than copying. + * Add detection of kernel upgrades to x2gothinclient_upgrade script. -- Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Sat, 28 May 2011 12:04:34 +0200 diff --git a/x2gothinclientmanagement/sbin/x2gothinclient_create b/x2gothinclientmanagement/sbin/x2gothinclient_create index 5297530..39213ba 100755 --- a/x2gothinclientmanagement/sbin/x2gothinclient_create +++ b/x2gothinclientmanagement/sbin/x2gothinclient_create @@ -126,11 +126,11 @@ chmod +x /sbin/start-stop-daemon [ \$? -eq 0 ] && apt-get install syslinux locales -y [ \$? -eq 0 ] && dpkg-reconfigure locales [ \$? -eq 0 ] && apt-get install linux-image-486 -y -[ \$? -eq 0 ] && cp /vmlinuz /vmlinuz.486 -[ \$? -eq 0 ] && cp /initrd.img /initrd.img.486 +[ \$? -eq 0 ] && mv /vmlinuz /vmlinuz.486 +[ \$? -eq 0 ] && mv /initrd.img /initrd.img.486 [ \$? -eq 0 ] && apt-get install linux-image-686 -y -[ \$? -eq 0 ] && cp /vmlinuz /vmlinuz.686 -[ \$? -eq 0 ] && cp /initrd.img /initrd.img.686 +[ \$? -eq 0 ] && mv /vmlinuz /vmlinuz.686 +[ \$? -eq 0 ] && mv /initrd.img /initrd.img.686 [ \$? -eq 0 ] && apt-get install x2gothinclient x2gocdmanager x2gosmartcardrules x2gousbmount -y # blacklist kernel modules @@ -178,4 +178,3 @@ x2gothinclient_update echo echo "X2go Thin Client creation has finished successfully." echo - diff --git a/x2gothinclientmanagement/sbin/x2gothinclient_shell b/x2gothinclientmanagement/sbin/x2gothinclient_shell index 19c19c5..2712320 100755 --- a/x2gothinclientmanagement/sbin/x2gothinclient_shell +++ b/x2gothinclientmanagement/sbin/x2gothinclient_shell @@ -80,6 +80,10 @@ chmod +x /sbin/start-stop-daemon umount -l /proc &> /dev/null umount -l /dev/pts &> /dev/null + +echo +echo "X2go Thin Client Shell has exited." +echo EOF chmod u+x "$TC_CHROOT/x2go_tce_shell.sh" chroot "$TC_CHROOT" /x2go_tce_shell.sh diff --git a/x2gothinclientmanagement/sbin/x2gothinclient_update b/x2gothinclientmanagement/sbin/x2gothinclient_update index d0e78bc..4f65ffa 100755 --- a/x2gothinclientmanagement/sbin/x2gothinclient_update +++ b/x2gothinclientmanagement/sbin/x2gothinclient_update @@ -66,4 +66,6 @@ chmod a+rx "$TC_CHROOT/etc/x2go/x2gothinclient_start" cp -v "$TC_CONFIG/x2gothinclient_sessions" "$TC_CHROOT/etc/x2go/x2gothinclient_sessions" chmod a+rx "$TC_CHROOT/etc/x2go/x2gothinclient_sessions" +echo +echo "X2go Thin Client configuration update complete." echo \ No newline at end of file diff --git a/x2gothinclientmanagement/sbin/x2gothinclient_upgrade b/x2gothinclientmanagement/sbin/x2gothinclient_upgrade index 6391d0f..a15d851 100755 --- a/x2gothinclientmanagement/sbin/x2gothinclient_upgrade +++ b/x2gothinclientmanagement/sbin/x2gothinclient_upgrade @@ -64,11 +64,24 @@ chmod +x /sbin/start-stop-daemon [ \$? -eq 0 ] && apt-get update [ \$? -eq 0 ] && apt-get upgrade +# check for kernel upgrades +for symlink in /vmlinuz /initrd.img; do + if [ -h $symlink ]; then + symlink_target=$(ls -l "$symlink" | awk '{print $11}') + echo $symlink_target | grep 486 >/dev/null && mv $symlink $symlink.486 + echo $symlink_target | grep 686 >/dev/null && mv $symlink $symlink.686 + fi +done + # restore start-stop-daemon [ \$(stat --format '%s' /sbin/start-stop-daemon) -lt 200 ] && mv /sbin/start-stop-daemon.keep /sbin/start-stop-daemon umount -l /proc &> /dev/null umount -l /dev/pts &> /dev/null + +echo +echo "X2go Thin Client Shell upgrade has finished." +echo EOF chmod u+x "$TC_CHROOT/x2go_tc_update.sh" chroot "$TC_CHROOT" /x2go_tc_update.sh hooks/post-receive -- x2gothinclient.git (X2go Thin Client Environment) This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "x2gothinclient.git" (X2go Thin Client Environment).

1 0

x2gothinclient.git - master (branch) updated: 940ac2f46b3542afce98981209364860e9b0e47d
by git-admin＠x2go.org 29 Jun '11

29 Jun '11

The branch, master has been updated via 940ac2f46b3542afce98981209364860e9b0e47d (commit) from c6a592e5b42a72e76f30c9d48005ee3cad0e676f (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 940ac2f46b3542afce98981209364860e9b0e47d Author: Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Date: Wed Jun 29 15:00:32 2011 +0200 Boot TCE kernel with nomodeset boot option to avoid gCard incompatibilities (Fb vs. Xorg). ----------------------------------------------------------------------- Summary of changes: debian/changelog | 2 ++ .../share/tftpboot/x2go-tce.cfg | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) The diff of changes is: diff --git a/debian/changelog b/debian/changelog index fd63e63..7a854c5 100644 --- a/debian/changelog +++ b/debian/changelog @@ -36,6 +36,8 @@ x2gothinclient (1.0.1.3-0~x2go1) UNRELEASED; urgency=low * More variable ($) escaping in x2gothinclient_* scripts. Fixes start-stop-daemon enable/disable code. * Reduce x2goclient CPU load from ~100% to ~0-1%. + * Boot TCE kernel with nomodeset boot option to avoid gCard incompatibilities + (Fb vs. Xorg). -- Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Sat, 28 May 2011 12:04:34 +0200 diff --git a/x2gothinclientmanagement/share/tftpboot/x2go-tce.cfg b/x2gothinclientmanagement/share/tftpboot/x2go-tce.cfg index fce038d..4bec362 100644 --- a/x2gothinclientmanagement/share/tftpboot/x2go-tce.cfg +++ b/x2gothinclientmanagement/share/tftpboot/x2go-tce.cfg @@ -1,8 +1,8 @@ LABEL x2go-tce-686 MENU LABEL X2go ^Thin Client KERNEL vmlinuz.686 - APPEND initrd=initrd.img.686 nfsroot=/opt/x2gothinclient/chroot boot=nfs ro quiet + APPEND initrd=initrd.img.686 nfsroot=/opt/x2gothinclient/chroot boot=nfs ro quiet nomodeset LABEL x2go-tce-486 MENU LABEL X2go ^Thin Client (old hardware) KERNEL vmlinuz.486 - APPEND initrd=initrd.img.486 nfsroot=/opt/x2gothinclient/chroot boot=nfs ro quiet + APPEND initrd=initrd.img.486 nfsroot=/opt/x2gothinclient/chroot boot=nfs ro quiet nomodeset hooks/post-receive -- x2gothinclient.git (X2go Thin Client Environment) This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "x2gothinclient.git" (X2go Thin Client Environment).

1 0

x2gothinclient.git - master (branch) updated: c6a592e5b42a72e76f30c9d48005ee3cad0e676f
by git-admin＠x2go.org 29 Jun '11

29 Jun '11

The branch, master has been updated via c6a592e5b42a72e76f30c9d48005ee3cad0e676f (commit) from 7241e5d56b095bd2986ae6d3ba45b93ab95ebb5b (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit c6a592e5b42a72e76f30c9d48005ee3cad0e676f Author: Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Date: Wed Jun 29 13:09:16 2011 +0200 Improvement for CPU load fix (gets rid of defunct sh process) ----------------------------------------------------------------------- Summary of changes: x2gothinclient/sbin/x2gothinclientd | 32 +++++++++++++++++++++----------- 1 files changed, 21 insertions(+), 11 deletions(-) The diff of changes is: diff --git a/x2gothinclient/sbin/x2gothinclientd b/x2gothinclient/sbin/x2gothinclientd index 62f6b2d..63e3984 100755 --- a/x2gothinclient/sbin/x2gothinclientd +++ b/x2gothinclient/sbin/x2gothinclientd @@ -20,6 +20,7 @@ use strict; +use IPC::Open3; sub catch_term { @@ -69,19 +70,18 @@ system("su x2goclient -c \". /etc/x2go/x2gothinclient_init\""); my $pid = fork(); if (not defined $pid) { - print "resources not avilable.\n"; + print "resources not avilable.\n"; } elsif ($pid != 0) { - open (F,">/var/run/x2gothinclient.pid"); - print F "$pid\n"; - close(F); + open (F,">/var/run/x2gothinclient.pid"); + print F "$pid\n"; + close(F); } elsif ($pid == 0 ) { # silence this daemon script completely... - close(STDIN); close(STDOUT); close(STDERR); @@ -91,21 +91,25 @@ elsif ($pid == 0 ) { # test if XServer is running, if not launch it... - if ( check_x() ==0) + if ( check_x() ==0 ) { - system("/usr/bin/Xorg -br&"); + system("/usr/bin/Xorg -br &"); } # test if pulseaudio is running, if not launch it... - if ( !check_pulse()) + if ( !check_pulse() ) { system("su - x2goclient -c \"DISPLAY=:0 pulseaudio -D -n -L 'module-native-protocol-tcp port=4713' -L 'module-esound-protocol-tcp port=16001' -L 'module-udev-detect'\""); } # test if x2goclient is running, if not launch it... - if ( !check_client()) + my $x2goclient_pid = 0; + if ( !check_client() ) { - qx(su - x2goclient -c \"export DISPLAY=:0; . /etc/x2go/x2gothinclient_start\"); + local *IN, *OUT, *ERR; + $x2goclient_pid = eval { + open3( \*IN, \*OUT, \*ERR, "su - x2goclient -c 'DISPLAY=:0 bash -c \"/etc/x2go/x2gothinclient_start &\"'"); + }; } # handle availability of the thinshutdown button GUI... @@ -119,7 +123,13 @@ elsif ($pid == 0 ) } if ( !$SHUTD && !$PROXY && $CLIENT) { - system("bash -c 'sleep 4; DISPLAY=:0 thinshutdown &'"); + system("sleep 4; DISPLAY=:0 thinshutdown &"); + } + + ## wait for x2goclient to finish + if ( check_client() ) + { + waitpid( $x2goclient_pid, 0 ); } } } hooks/post-receive -- x2gothinclient.git (X2go Thin Client Environment) This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "x2gothinclient.git" (X2go Thin Client Environment).

1 0

x2gothinclient.git - build-main (branch) created: 7241e5d56b095bd2986ae6d3ba45b93ab95ebb5b
by git-admin＠x2go.org 28 Jun '11

28 Jun '11

The branch, build-main has been created at 7241e5d56b095bd2986ae6d3ba45b93ab95ebb5b (commit) - Log ----------------------------------------------------------------- ----------------------------------------------------------------------- hooks/post-receive -- x2gothinclient.git (X2go Thin Client Environment) This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "x2gothinclient.git" (X2go Thin Client Environment).

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

x2go-commits