x2go-commits

x2go-commits@lists.x2go.org

1 participants
37903 discussions

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 19 Jan '19

19 Jan '19

A page in your DokuWiki was added or changed. Here are the details: Date : 2019/01/19 13:23 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.9.4 IP-Address : 149.172.203.221 Hostname : HSI-KBW-149-172-203-221.hsi13.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1547845278 New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [List of open ToDos/FIXMEs for this page] added new item regarding if-up User : stefanbaur @@ -904,8 +904,10 @@ FIXME A smaller image size can be achieved by removing the following packages from the squashfs: ''libxapian30 libpcsclite1 libdbus-glib-1-2 libfuse2 libpipeline1 libusb-1.0-0 libxv1 xnest xserver-xephyr rdesktop freerdp-x11 traceroute screen net-tools less ntfs-3g fuse locales cifs-utils xterm libgssglue1 libntfs-3g871 libtalloc2 libtcl8.6 libtk8.6 libutempter0 libvncclient1 libvncserver1 libwbclient0 libxcb-xf86dri0 libxcb-xv0 samba-common tcl tcl8.6 tk tk8.6 xbitmaps nfs-common rpcbind atmel-firmware bluez-firmware dahdi-firmware-nonfree hdmi2usb-fx2-firmware iso-codes ixo-usb-jtag libc-l10n libnfsidmap2 libtirpc1 firmware* x11vnc* libfreerdp* libwinpr* libapparmor1 systemd apt-utils libapt-inst2.0'' - check if this could be turned into a build parameter. Note that this makes only sense for a netboot image that uses X2Go sessions only, and no NTFS media (neither fixed disk nor USB). Further reduction needs to be investigated: ''acpi-support-base* acpid* acpi-support* pm-utils* powermgmt-base* gnupg gnupg-agent whiptail vim* vim-common* vim-tiny* xxd* xinetd libcroco3* libcurl3* libexif12* libgdk-pixbuf2.0-0* libgdk-pixbuf2.0-common* libgif7* libid3tag0* libimlib2* libnghttp2-14* libobrender32v5* libobt2v5* libpango-1.0-0* libpangocairo-1.0-0* libpangoft2-1.0-0* libpangoxft-1.0-0* librsvg2-2* librtmp1* libssh2-1* libstartup-notification0* libxft2* libxss1* vim-runtime* xprintidle feh xdotool openbox rsync xserver-xorg-input-wacom* xserver-xorg-video-all* xserver-xorg-video-amdgpu* xserver-xorg-video-ati* xserver-xorg-video-nouveau* xserver-xorg-video-qxl* xserver-xorg-video-radeon* xserver-xorg-video-vmware* libdrm-amdgpu1* libdrm-nouveau2* libdrm-radeon1* libllvm3.9* libsensors4* libxatracker2*'' causes an X startup failure during boot (things seem to work when X is started manually afterwards, which makes this especially bizarre) FIXME for MATE-MiniDesktop, it might make sense to teach the image how to do LDAP auth (preferably with LDAPS or LDAP+TLS) and use lightdm without the auto-login. That way, a local screensaver //with// locking functionality (prompting for the actual user's LDAP password) should be possible - and LDAP credential passthrough to X2GoClient should work, too (though that might require kerberos in addition to LDAP,we'll see). + + FIXME Scripts triggered by if-up should check if a new download is really necessary. ===== List of closed ToDos/FIXMEs for this page ===== * ''audioout='', ''blank='', ''*blankdpmsfix'', ''nodpms'', ''xinerama='', are currently unsupported in MiniDesktop-Mode, but this is being worked on, by outsourcing them into scripts under ''/etc/X11/Xsession.d/'' (currently, they reside in ''/lib/live/config/2900-x2go-thinclientconfig'' - which doesn't exist in the MiniDesktop branches - and from there, they get written to ''~/.xsession'' - fixed in github repo, soon in x2go repo * It would be nice to have a boot parameter ''xroot=[0xaabbcc|URI1[|URI2|...]]'' for the desktop background image/color, and a boot parameter ''xrootmode=center|fill|scale|tile'' to determine how the image(s) should be positioned (if the parameter has been set, but something is wrong, it should default to the "grey mesh" background) - fixed in github repo, soon in x2go repo * It would also be nice to have boot parameters ''xsaverimages=[URI1[|URI2|...]]'', ''xsaveridletime=n'', ''xsaverimgtime=n'', for a local, non-locking slideshow screensaver (if no images are specified/downloaded by the time it activates, it should just blank the screen). That way, one could display a slideshow without having to push the images across the network every time - fixed in github repo, soon in x2go repo -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 18 Jan '19

18 Jan '19

A page in your DokuWiki was added or changed. Here are the details: Date : 2019/01/18 21:01 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.9.4 IP-Address : 149.172.203.221 Hostname : HSI-KBW-149-172-203-221.hsi13.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1547843014 New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [What options are available under FURTHER-OPTIONS-GO-HERE?] - added info for xorg-driver parameter (standard live-boot parameter) User : stefanbaur @@ -621,8 +621,9 @@ * ''timezone=TIMEZONE'' - can be used to define a timezone other than UTC, e.g. 'Europe/Berlin'. This especially makes sense for MATE-MiniDesktop, but is nice to have in regular TCE-Live as well, because the timestamp of the log messages will show the local time instead of UTC. This is a standard parameter of live-boot, and not specific to X2Go. * ''x3270servers="host[:port][|host[:port]...]"'' - this is only available in MiniDesktop mode. It allows you to specify one or more hosts (with optional ports) for x3270 terminal emulation sessions that will be created as desktop shortcuts on the thinclient. For a default 3270 connection, the port is 23 (telnet) and does not need to be specified. For an SSL-encrypted connection (recommended), the port is 992. Hosts may be IP addresses or DNS names, and need to be separated with a ''|''. (feature available via github repo, soon via x2go repo too) * ''x5250servers="host[:port][|host[:port]...]"'' - this is only available in MiniDesktop mode. It allows you to specify one or more hosts (with optional ports) for x5250 terminal emulation sessions that will be created as desktop shortcuts on the thinclient. For a default 5250 connection, the port is 23 (telnet) and does not need to be specified. For an SSL-encrypted connection (recommended), the port is 992. Hosts may be IP addresses or DNS names, and need to be separated with a ''|''. Note that x5250 support is currently not part of the standard image available via git, as there is no x5250 executable in Debian. You can try using x3270 instead, most modern IBM i (System i, iSeries, AS/400) systems support 3270-type connections as well. If you need native 5250 support, say, with a commercial, closed-source 5250 terminal emulator, please leave a message on the X2Go-User Mailing List and we'll tell you if and how you can integrate that into your build. (feature available via github repo, soon via x2go repo too) * ''xinerama=left-of|right-of|above|below|same-as'' - Allows you to specify how multiple screens are handled (same-as clones the primary screen to all secondary screens, the other commands will cascade and thus expand the screen). Note that the current implementation will enforce "same-as" if it detects a touch screen driver (wacom) and no other pointing device. This is so you won't get stuck being unable to log off, for example, due to your touch device being limited to one screen. + * ''xorg-driver=DRIVERNAME'' - will skip graphics driver autodetection and force the specified driver instead. This is a standard parameter of live-boot, and not specific to X2Go. * ''xorg-resolution=HRESxVRES'' - will force the horizontal resolution to HRES and the vertical resolution to VRES, e.g. ''xorg-resolution=1280x1024'', useful if autodetection for the correct screen size fails, but you do get as far as seeing the X2Go GUI. This is a standard parameter of live-boot, and not specific to X2Go. * ''xorgconfurl=tftp|http|https|ftp://your-http-server-ip-or-dns-here/x2go-tce/x2go-tce.xorg.conf'' - when a client outright refuses to boot into the graphical X2Go login screen, but gets stuck at the console or a black screen instead, yet you can get the GUI to work using a regular Linux on the same hardware, you can disable the X Server's autodetection and force it to use the xorg.conf specified here. Note that you should use a more descriptive name for the file, as described below. **Attention: Whoever manages to spoof the server name can inject rogue xorg config files into your ThinClients.** To mitigate this risk, use HTTPS, where the attacker would have to spoof both server name and matching certificate. * ''xroot=[0xaabbcc|URI1[|URI2|...]]'' - can be used to set a local desktop background image or color (in hex format, with leading 0x, not leading #). On the main screen, this is only visible during startup, while additional screens will display whatever is set for them when there is no active session. The background also becomes visible for a short moment when the optional local screensaver activates or deactivates. Specifying more than one image will cause the first image to show up on the first screen, the second image on the second screen, and so on (feature available via github repo, soon via x2go repo too). * ''xrootmode=center|fill|scale|tile'' can be used to determine how the local desktop background image(s) should be positioned. If the parameter has been set, but something is wrong, it will default to a //grey mesh// background. (feature available via github repo, soon via x2go repo too). (feature available via github repo, soon via x2go repo too) -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 18 Jan '19

18 Jan '19

A page in your DokuWiki was added or changed. Here are the details: Date : 2019/01/18 20:23 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.9.4 IP-Address : 149.172.203.221 Hostname : HSI-KBW-149-172-203-221.hsi13.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1547842943 New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [What options are available under FURTHER-OPTIONS-GO-HERE?] properly tagged a live-build boot parameter as such User : stefanbaur @@ -621,9 +621,9 @@ * ''timezone=TIMEZONE'' - can be used to define a timezone other than UTC, e.g. 'Europe/Berlin'. This especially makes sense for MATE-MiniDesktop, but is nice to have in regular TCE-Live as well, because the timestamp of the log messages will show the local time instead of UTC. This is a standard parameter of live-boot, and not specific to X2Go. * ''x3270servers="host[:port][|host[:port]...]"'' - this is only available in MiniDesktop mode. It allows you to specify one or more hosts (with optional ports) for x3270 terminal emulation sessions that will be created as desktop shortcuts on the thinclient. For a default 3270 connection, the port is 23 (telnet) and does not need to be specified. For an SSL-encrypted connection (recommended), the port is 992. Hosts may be IP addresses or DNS names, and need to be separated with a ''|''. (feature available via github repo, soon via x2go repo too) * ''x5250servers="host[:port][|host[:port]...]"'' - this is only available in MiniDesktop mode. It allows you to specify one or more hosts (with optional ports) for x5250 terminal emulation sessions that will be created as desktop shortcuts on the thinclient. For a default 5250 connection, the port is 23 (telnet) and does not need to be specified. For an SSL-encrypted connection (recommended), the port is 992. Hosts may be IP addresses or DNS names, and need to be separated with a ''|''. Note that x5250 support is currently not part of the standard image available via git, as there is no x5250 executable in Debian. You can try using x3270 instead, most modern IBM i (System i, iSeries, AS/400) systems support 3270-type connections as well. If you need native 5250 support, say, with a commercial, closed-source 5250 terminal emulator, please leave a message on the X2Go-User Mailing List and we'll tell you if and how you can integrate that into your build. (feature available via github repo, soon via x2go repo too) * ''xinerama=left-of|right-of|above|below|same-as'' - Allows you to specify how multiple screens are handled (same-as clones the primary screen to all secondary screens, the other commands will cascade and thus expand the screen). Note that the current implementation will enforce "same-as" if it detects a touch screen driver (wacom) and no other pointing device. This is so you won't get stuck being unable to log off, for example, due to your touch device being limited to one screen. - * ''xorg-resolution=HRESxVRES'' - will force the horizontal resolution to HRES and the vertical resolution to VRES, e.g. ''xorg-resolution=1280x1024'', useful if autodetection for the correct screen size fails, but you do get as far as seeing the X2Go GUI + * ''xorg-resolution=HRESxVRES'' - will force the horizontal resolution to HRES and the vertical resolution to VRES, e.g. ''xorg-resolution=1280x1024'', useful if autodetection for the correct screen size fails, but you do get as far as seeing the X2Go GUI. This is a standard parameter of live-boot, and not specific to X2Go. * ''xorgconfurl=tftp|http|https|ftp://your-http-server-ip-or-dns-here/x2go-tce/x2go-tce.xorg.conf'' - when a client outright refuses to boot into the graphical X2Go login screen, but gets stuck at the console or a black screen instead, yet you can get the GUI to work using a regular Linux on the same hardware, you can disable the X Server's autodetection and force it to use the xorg.conf specified here. Note that you should use a more descriptive name for the file, as described below. **Attention: Whoever manages to spoof the server name can inject rogue xorg config files into your ThinClients.** To mitigate this risk, use HTTPS, where the attacker would have to spoof both server name and matching certificate. * ''xroot=[0xaabbcc|URI1[|URI2|...]]'' - can be used to set a local desktop background image or color (in hex format, with leading 0x, not leading #). On the main screen, this is only visible during startup, while additional screens will display whatever is set for them when there is no active session. The background also becomes visible for a short moment when the optional local screensaver activates or deactivates. Specifying more than one image will cause the first image to show up on the first screen, the second image on the second screen, and so on (feature available via github repo, soon via x2go repo too). * ''xrootmode=center|fill|scale|tile'' can be used to determine how the local desktop background image(s) should be positioned. If the parameter has been set, but something is wrong, it will default to a //grey mesh// background. (feature available via github repo, soon via x2go repo too). (feature available via github repo, soon via x2go repo too) * ''xsaveridletime=n'' - this value determines how long the screen should have been idle before the local slideshow screensaver sets in (value given in seconds). We recommend using 60 seconds less than for the server-sided, locking screensaver. (feature available via github repo, soon via x2go repo too) -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 18 Jan '19

18 Jan '19

A page in your DokuWiki was added or changed. Here are the details: Date : 2019/01/18 20:22 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.9.4 IP-Address : 149.172.203.221 Hostname : HSI-KBW-149-172-203-221.hsi13.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1547773322 New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [What options are available under FURTHER-OPTIONS-GO-HERE?] - added info for timezone parameter (standard live-boot parameter) User : stefanbaur @@ -617,8 +617,9 @@ * ''tcedebug'' - this switches X2GoClient into debug mode and will also lead to increased logging to /var/log/x2goclient and to tty9 * ''tcpprint'' - Will allow you to use local LPT/USB printers like "dumb" network printers (listening to port 9100 and above). Requires MAC->IP mapping in DHCP server (and optionally, DNS->IP mapping), or static IPs - else your print jobs will end up on random devices. This setup is preferred over the X2GoClient's built-in printing for locally attached printers if X2GoServer and ThinClients are on the same network. It is not recommended when your X2Go connection goes across the internet or when the ThinClient is actually a laptop roaming between different networks. **Attention: When used without ''tcpprintonlyfrom'' (see below), this means anyone that can reach your thin client via e.g. ping can also send print jobs to it!** * ''tcpprintonlyfrom=x.x.x.x'' - Will allow you to specify which IP address may connect to Port 9100 and above for printing to a locally attached LPT/USB printer. This should be the IP of your CUPS server or whatever print server system you use. Understands the same syntax as ''xinetd'''s ''only_from''. * ''throttle=n|n:n:n:n:n'' - Will throttle down- and upload speed (''throttle=n'') or set throttling limits as follows: download:upload:smoothingtime:smoothinglength:latency. Defaults for up- and download are 10 (KiloBytes/s), 3.0 (seconds, using decimals is permitted) smoothingtime, 20 (KiloBytes), 0 (ms). for a detailed description of these parameters, see "man trickle". You can use the first 1, 2, 3, 4 or all 5 parameters. To set down- and/or upload speed to unlimited, use the letter "u" instead of a numeric value. + * ''timezone=TIMEZONE'' - can be used to define a timezone other than UTC, e.g. 'Europe/Berlin'. This especially makes sense for MATE-MiniDesktop, but is nice to have in regular TCE-Live as well, because the timestamp of the log messages will show the local time instead of UTC. This is a standard parameter of live-boot, and not specific to X2Go. * ''x3270servers="host[:port][|host[:port]...]"'' - this is only available in MiniDesktop mode. It allows you to specify one or more hosts (with optional ports) for x3270 terminal emulation sessions that will be created as desktop shortcuts on the thinclient. For a default 3270 connection, the port is 23 (telnet) and does not need to be specified. For an SSL-encrypted connection (recommended), the port is 992. Hosts may be IP addresses or DNS names, and need to be separated with a ''|''. (feature available via github repo, soon via x2go repo too) * ''x5250servers="host[:port][|host[:port]...]"'' - this is only available in MiniDesktop mode. It allows you to specify one or more hosts (with optional ports) for x5250 terminal emulation sessions that will be created as desktop shortcuts on the thinclient. For a default 5250 connection, the port is 23 (telnet) and does not need to be specified. For an SSL-encrypted connection (recommended), the port is 992. Hosts may be IP addresses or DNS names, and need to be separated with a ''|''. Note that x5250 support is currently not part of the standard image available via git, as there is no x5250 executable in Debian. You can try using x3270 instead, most modern IBM i (System i, iSeries, AS/400) systems support 3270-type connections as well. If you need native 5250 support, say, with a commercial, closed-source 5250 terminal emulator, please leave a message on the X2Go-User Mailing List and we'll tell you if and how you can integrate that into your build. (feature available via github repo, soon via x2go repo too) * ''xinerama=left-of|right-of|above|below|same-as'' - Allows you to specify how multiple screens are handled (same-as clones the primary screen to all secondary screens, the other commands will cascade and thus expand the screen). Note that the current implementation will enforce "same-as" if it detects a touch screen driver (wacom) and no other pointing device. This is so you won't get stuck being unable to log off, for example, due to your touch device being limited to one screen. * ''xorg-resolution=HRESxVRES'' - will force the horizontal resolution to HRES and the vertical resolution to VRES, e.g. ''xorg-resolution=1280x1024'', useful if autodetection for the correct screen size fails, but you do get as far as seeing the X2Go GUI -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:x2goclient-file-sharing
by wiki-admin＠x2go.org 18 Jan '19

18 Jan '19

A page in your DokuWiki was added or changed. Here are the details: Date : 2019/01/18 15:08 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.9.4 IP-Address : 149.172.203.221 Hostname : HSI-KBW-149-172-203-221.hsi13.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/doc:howto:x2goclient-file-sharing?rev=148544… New Revision: https://wiki.x2go.org/doku.php/doc:howto:x2goclient-file-sharing Edit Summary: [Setting up File Sharing in X2GoClient] updated warning message User : stefanbaur @@ -2,9 +2,9 @@ <note>On some older Linux distributions, it was required that you add your users to the ''fuse'' group on your server. Newer distributions do away with this requirement. So if your server does **not** have a group called ''fuse'', you should not need to create (and populate) it. Only populate it with your users if it already exists, to avoid [[https://en.wikipedia.org/wiki/Cargo_cult_programming|Cargo Cult Programming]].</note> The following screenshots were made using [[http://code.x2go.org/releases/binary-win32/x2goclient/releases/4.0.5.1-2016… for Windows 4.0.5.1-2016.08.18]]. The design of the session tabs may vary slightly in later versions, however, the principle stays the same. - <note important>**Attention:** There is a bug in X2GoClient 4.0.5.2 that causes Folder Sharing to fail in some, if not all use cases. If you require this feature, please remain on X2GoClient 4.0.5.1 until 4.1.0.0 is released.</note> + <note important>**Attention:** There is a bug in X2GoClient 4.0.5.2 that causes Folder Sharing to fail in some, if not all use cases. If you need this feature, please upgrade to the latest X2GoClient release //or// downgrade to X2GoClient 4.0.5.1</note> ===== Session Setup ===== ==== First, let's create a New Session ==== -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[x2gothinclient] branch master updated (e3370bf -> 25bef95)
by git-admin＠x2go.org 18 Jan '19

18 Jan '19

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch master in repository x2gothinclient. from e3370bf usbmount/x2gousbmount: rework x2gothinclientd check. new 25bef95 19_x2gothinclient-minidesktop.gschema.override: Explicitly use MATE-specific theming of the desktop UI. (Closes: #1364). The 1 revisions listed above as "new" are entirely new to this repository and will be described in separate emails. The revisions listed as "adds" were already present in the repository and have only been added to this reference. Summary of changes: debian/changelog | 5 +++++ .../schema-overrides/19_x2gothinclient-minidesktop.gschema.override | 6 +++--- 2 files changed, 8 insertions(+), 3 deletions(-) -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/x2gothinclient.git

1 1

[x2goclient] branch feature/kdrive_support updated (1e9d573 -> f64df18)
by git-admin＠x2go.org 18 Jan '19

18 Jan '19

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch feature/kdrive_support in repository x2goclient. from 1e9d573 Second update round of Czech translation + add it to x2goclient.pro. new f64df18 x2gokdrive support for X2GoClient. The 1 revisions listed above as "new" are entirely new to this repository and will be described in separate emails. The revisions listed as "adds" were already present in the repository and have only been added to this reference. Summary of changes: src/InteractionDialog.cpp | 2 + src/onmainwindow.cpp | 169 +++++++++++++++++++++++++++++++++++++++++----- src/onmainwindow.h | 2 +- src/sessionexplorer.cpp | 2 +- src/sessionwidget.cpp | 20 ++++-- src/sessionwidget.h | 1 + src/wapi.cpp | 1 + 7 files changed, 172 insertions(+), 25 deletions(-) -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/x2goclient.git

1 1

[x2goclient] branch feature/kdrive_support created (now 1e9d573)
by git-admin＠x2go.org 18 Jan '19

18 Jan '19

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch feature/kdrive_support in repository x2goclient. at 1e9d573 Second update round of Czech translation + add it to x2goclient.pro. No new revisions were added by this update. -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/x2goclient.git

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 18 Jan '19

18 Jan '19

A page in your DokuWiki was added or changed. Here are the details: Date : 2019/01/18 01:02 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.9.4 IP-Address : 149.172.203.221 Hostname : HSI-KBW-149-172-203-221.hsi13.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1547771080 New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [List of open ToDos/FIXMEs for this page] added further info regarding boot parameter config file User : stefanbaur @@ -896,9 +896,9 @@ FIXME ''bg='', ''branding='', ''broker-url='', ''ldap='', ''ldap1='', ''ldap2='', ''session='', ''throttle='', are currently unsupported in MiniDesktop-Mode. This could be changed, given enough tuits. Probably the easiest way would be to have ''/lib/live/config/2900-x2go-thinclientconfig'' exist in the MiniDesktop branches as well, make it aware of which environment it is running in (TCE/TCE-MMD), and have it patch the appropriate files. FIXME <del>''2200-xserver-xorg-getxorgconf''</del> all scripts accepting URLs in boot parameters should be taught to understand ''file:<nowiki>///</nowiki>'' URLs. Such files can be included in the image by placing them in the ''./patch/includes.chroot/'' directory (in a suitable subdirectory) and referencing them from there. - FIXME it would be cool if most of the TCE-specific boot parameters could be placed into a file that in turn can be specified as a boot parameter, to reduce clutter and boot parameter length. This file would then have to be sourced by the scripts, after they have extracted everything from /proc/cmdline. This will make adding the feature easier, by simply deciding that parameters from this file take precendence over boot parameters. One might argue that boot parameters should take precedence over the config file, but this sounds way more complicated to implement. + FIXME it would be cool if most of the TCE-specific boot parameters could be placed into a file that in turn can be specified as a boot parameter, to reduce clutter and boot parameter length. This could be aCGI script, even, thus making it possible to distribute different configs depending on the source IP of the ThinClient, rather than the MAC Address. Said file would then have to be sourced by the scripts, after they have extracted everything from /proc/cmdline. This will make adding the feature easier, by simply deciding that parameters from this file take precendence over boot parameters. One might argue that boot parameters should take precedence over the config file, but this sounds way more complicated to implement. FIXME A smaller image size can be achieved by removing the following packages from the squashfs: ''libxapian30 libpcsclite1 libdbus-glib-1-2 libfuse2 libpipeline1 libusb-1.0-0 libxv1 xnest xserver-xephyr rdesktop freerdp-x11 traceroute screen net-tools less ntfs-3g fuse locales cifs-utils xterm libgssglue1 libntfs-3g871 libtalloc2 libtcl8.6 libtk8.6 libutempter0 libvncclient1 libvncserver1 libwbclient0 libxcb-xf86dri0 libxcb-xv0 samba-common tcl tcl8.6 tk tk8.6 xbitmaps nfs-common rpcbind atmel-firmware bluez-firmware dahdi-firmware-nonfree hdmi2usb-fx2-firmware iso-codes ixo-usb-jtag libc-l10n libnfsidmap2 libtirpc1 firmware* x11vnc* libfreerdp* libwinpr* libapparmor1 systemd apt-utils libapt-inst2.0'' - check if this could be turned into a build parameter. Note that this makes only sense for a netboot image that uses X2Go sessions only, and no NTFS media (neither fixed disk nor USB). Further reduction needs to be investigated: ''acpi-support-base* acpid* acpi-support* pm-utils* powermgmt-base* gnupg gnupg-agent whiptail vim* vim-common* vim-tiny* xxd* xinetd libcroco3* libcurl3* libexif12* libgdk-pixbuf2.0-0* libgdk-pixbuf2.0-common* libgif7* libid3tag0* libimlib2* libnghttp2-14* libobrender32v5* libobt2v5* libpango-1.0-0* libpangocairo-1.0-0* libpangoft2-1.0-0* libpangoxft-1.0-0* librsvg2-2* librtmp1* libssh2-1* libstartup-notification0* libxft2* libxss1* vim-runtime* xprintidle feh xdotool openbox rsync xserver-xorg-input-wacom* xserver-xorg-video-all* xserver-xorg-video-amdgpu* xserver-xorg-video-ati* xserver-xorg-video-nouveau* xserver-xorg-video-qxl* xserver-xorg-video-radeon* xserver-xorg-video-vmware* libdrm-amdgpu1* libdrm-nouveau2* libdrm-radeon1* libllvm3.9* libsensors4* libxatracker2*'' causes an X startup failure during boot (things seem to work when X is started manually afterwards, which makes this especially bizarre) -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[x2gothinclient] branch master updated (c6106bd -> e3370bf)
by git-admin＠x2go.org 18 Jan '19

18 Jan '19

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch master in repository x2gothinclient. from c6106bd usbmount/x2gousbmount: whitespace- and comment-only changes. new e3370bf usbmount/x2gousbmount: rework x2gothinclientd check. The 1 revisions listed above as "new" are entirely new to this repository and will be described in separate emails. The revisions listed as "adds" were already present in the repository and have only been added to this reference. Summary of changes: debian/changelog | 1 + usbmount/x2gousbmount | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/x2gothinclient.git

1 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

x2go-commits