x2go-commits December 2019

x2go-commits@lists.x2go.org

3 participants
179 discussions

[[X2Go Wiki]] page changed: events:start
by wiki-admin＠x2go.org 07 Dec '19

07 Dec '19

A page in your DokuWiki was added or changed. Here are the details: Date : 2019/12/07 01:06 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:60.9) Gecko/20100101 Goanna/4.4 Firefox/60.9 PaleMoon/28.7.2 IP-Address : 109.193.81.67 Hostname : HSI-KBW-109-193-081-067.hsi7.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/events:start?rev=1575619925 New Revision: https://wiki.x2go.org/doku.php/events:start Edit Summary: [2019-11-29 to 2019-12-01 - Hack4Glarus 2019 Winter, Linthal, Switzerland] replaced link with WayBackMachine link User : stefanbaur @@ -21,9 +21,9 @@ ===== Past Events ===== ==== 2019-11-29 to 2019-12-01 - Hack4Glarus 2019 Winter, Linthal, Switzerland ==== * We'll have an X2Go demo booth there, to check out how well X2Go works on a Multi-Gigabit-per-second network with IPv6 * Booth volunteers: Stefan<del>, possibly Juri</del> - * More event info can be found here: https://hack4glarus.ch/ + * More event info can be found here: [[http://web.archive.org/web/20191119112414/https://hack4glarus.ch/|https://h…]] * Note that you need to pay 20 CHF per person if you want to attend this event: * this covers food, drinks & a mattress to sleep on * if you prefer an actual hotel room, HackingHotel Diesbach is nearby (https://www.booking.com/hotel/ch/hacking-diesbach.de.html) but a room there will obviously cost you extra * X2Go-related presentation slides can be found [[https://drive.google.com/open?id=14HSOPTZFQBM6aLqJQwymWdHl6HSXNl-u|here]] -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[pyhoca-gui] branch master updated (5852895 -> 28f3c10)
by git-admin＠x2go.org 06 Dec '19

06 Dec '19

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch master in repository pyhoca-gui. from 5852895 debian/control: Bump DH compat level to version 9. + Rework packaging, use pybuild. new 28f3c10 debian/control: Drop from D (pyhoca-gui): python3-argparse. Shipped in core module bundle of Python3. The 1 revisions listed above as "new" are entirely new to this repository and will be described in separate emails. The revisions listed as "adds" were already present in the repository and have only been added to this reference. Summary of changes: debian/changelog | 2 ++ debian/control | 1 - 2 files changed, 2 insertions(+), 1 deletion(-) -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/pyhoca-gui.git

1 1

[[X2Go Wiki]] page changed: events:start
by wiki-admin＠x2go.org 06 Dec '19

06 Dec '19

A page in your DokuWiki was added or changed. Here are the details: Date : 2019/12/06 08:12 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:60.9) Gecko/20100101 Goanna/4.4 Firefox/60.9 PaleMoon/28.7.2 IP-Address : 109.193.81.67 Hostname : HSI-KBW-109-193-081-067.hsi7.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/events:start?rev=1575619832 New Revision: https://wiki.x2go.org/doku.php/events:start Edit Summary: [Tentative] added H4G entries for 2020 User : stefanbaur @@ -4,13 +4,15 @@ ===== Upcoming Events ===== ===== 2020 ===== ====Tentative==== * LinuxDay.AT 2020 - some time around October-December 2020 (No CfP yet) + * Hack4Glarus 2020.2 - some time in late November/early December 2020? * IT-Kongress 2020, Neu-Ulm, Germany - probably the 1st or 2nd Thursday in November 2020 (No CfP yet) * X2Go: The Gathering 2020, Linuxhotel, Essen, Germany - some time in Q3 or Q4 2020 * OpenPOWER Summit Europe 2020, ??? - some time around September-October 2020 (No CfP yet) * Linux Expo Ulm 2020, Ulm, Germany - if it takes place at all * TUEBIX 2020, Tübingen, Germany - some time around June - July 2020 (No CfP yet) + * Hack4Glarus 2020.1 - some time in early June? * LinuxWochen Wien, Vienna, Austria - 2020-05-07 to 2020-05-09 (No CfP yet) * Linux-Info-Tag Augsburg, Augsburg, Germany - 2020-04-?? (No CfP yet) * <del>Chemnitzer LinuxTage, Chemnitz, Germany - 14-03-2020 to 15-03-2020</del> - unable to attend, clashes with Pi and More 12 1/2 * Pi and More 12 1/2, Stuttgart, Germany - 14-03-2020 (No CfP yet) -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: events:start
by wiki-admin＠x2go.org 06 Dec '19

06 Dec '19

A page in your DokuWiki was added or changed. Here are the details: Date : 2019/12/06 08:10 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:60.9) Gecko/20100101 Goanna/4.4 Firefox/60.9 PaleMoon/28.7.2 IP-Address : 109.193.81.67 Hostname : HSI-KBW-109-193-081-067.hsi7.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/events:start?rev=1575199019 New Revision: https://wiki.x2go.org/doku.php/events:start Edit Summary: Hack4Glarus 2019.2 is now a thing of the past :'( User : stefanbaur @@ -15,8 +15,9 @@ * <del>Chemnitzer LinuxTage, Chemnitz, Germany - 14-03-2020 to 15-03-2020</del> - unable to attend, clashes with Pi and More 12 1/2 * Pi and More 12 1/2, Stuttgart, Germany - 14-03-2020 (No CfP yet) ===== 2019 ===== + ===== Past Events ===== ==== 2019-11-29 to 2019-12-01 - Hack4Glarus 2019 Winter, Linthal, Switzerland ==== * We'll have an X2Go demo booth there, to check out how well X2Go works on a Multi-Gigabit-per-second network with IPv6 * Booth volunteers: Stefan<del>, possibly Juri</del> * More event info can be found here: https://hack4glarus.ch/ @@ -25,10 +26,8 @@ * if you prefer an actual hotel room, HackingHotel Diesbach is nearby (https://www.booking.com/hotel/ch/hacking-diesbach.de.html) but a room there will obviously cost you extra * X2Go-related presentation slides can be found [[https://drive.google.com/open?id=14HSOPTZFQBM6aLqJQwymWdHl6HSXNl-u|here]] {{ :events:x2go_h4g_img_20191201_100721_5.jpg?400 | X2Go Booth @ Hack4Glarus 2019.2}} - - ===== Past Events ===== ==== 2019-10-19 - LinuxDay.AT 2019, Dornbirn, Austria ==== * booth confirmed * booth volunteers: Stefan, Mihai, <del>Bernhard (FreeRDP/orca)</del> -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[x2goclient] branch master updated (50cb6c6 -> fc45ceb)
by git-admin＠x2go.org 05 Dec '19

05 Dec '19

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch master in repository x2goclient. from 50cb6c6 src/onmainwindow.cpp: also remove proxy "host:port" parsing at connect time. Fixes: #1418. new fc45ceb macbuild.sh: switch to bundling PulseAudio 13.0 since it's now available in MacPorts. The 1 revisions listed above as "new" are entirely new to this repository and will be described in separate emails. The revisions listed as "adds" were already present in the repository and have only been added to this reference. Summary of changes: debian/changelog | 2 ++ macbuild.sh | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/x2goclient.git

1 1

Build failed in Jenkins: pyhoca-gui+nightly+debian-bullseye #5
by jenkins＠x2go.org 05 Dec '19

05 Dec '19

See <https://jenkins.x2go.org:8443/job/pyhoca-gui+nightly+debian-bullseye/5/disp…> Changes: [mike.gabriel] PyHocaGUI.OnExit(): Return an exitcode. [mike.gabriel] run 2to3 on this project [mike.gabriel] More porting to Python 3 (manually). [mike.gabriel] wxgui/profilemanager.py: Capture failures that might occur when writing [mike.gabriel] Menu.Append{,Menu}() calls: Turn arguments into positional arguments. [mike.gabriel] Port to wxPython 4.0.x. [mike.gabriel] pyhoca/wxgui/{logon.py,passphrase.py}: Merge code of both files into [mike.gabriel] debian/changelog: update from Git history [mike.gabriel] debian/control: Switch from Py2 to Py3 (B-Ds and Ds). ------------------------------------------ [...truncated 8.08 KB...] ' + IFS=' ' + read -a deb_build_for_arr + IFS=' ' + typeset line= + for line in "${deb_build_for_arr[@]}" ++ cut -d: -f1 ++ tr '[:upper:]' '[:lower:]' + l_DIST=debian + l_CODENAMES=bullseye + grep -qs debian + for l_CODENAME in ${l_CODENAMES} + test -z bullseye + grep bullseye debian:bullseye +++ repeat_str X 24 +++ typeset INPUT=X +++ typeset COUNT=24 +++ typeset ret= +++ typeset -i i=0 +++ '[' 0 -lt 24 ']' ++++ printf X +++ ret=X +++ i=1 +++ '[' 1 -lt 24 ']' ++++ printf X +++ ret=XX +++ i=2 +++ '[' 2 -lt 24 ']' ++++ printf X +++ ret=XXX +++ i=3 +++ '[' 3 -lt 24 ']' ++++ printf X +++ ret=XXXX +++ i=4 +++ '[' 4 -lt 24 ']' ++++ printf X +++ ret=XXXXX +++ i=5 +++ '[' 5 -lt 24 ']' ++++ printf X +++ ret=XXXXXX +++ i=6 +++ '[' 6 -lt 24 ']' ++++ printf X +++ ret=XXXXXXX +++ i=7 +++ '[' 7 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXX +++ i=8 +++ '[' 8 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXX +++ i=9 +++ '[' 9 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXX +++ i=10 +++ '[' 10 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXX +++ i=11 +++ '[' 11 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXX +++ i=12 +++ '[' 12 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXX +++ i=13 +++ '[' 13 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXX +++ i=14 +++ '[' 14 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXX +++ i=15 +++ '[' 15 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXX +++ i=16 +++ '[' 16 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXX +++ i=17 +++ '[' 17 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXX +++ i=18 +++ '[' 18 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXX +++ i=19 +++ '[' 19 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXX +++ i=20 +++ '[' 20 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXX +++ i=21 +++ '[' 21 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXX +++ i=22 +++ '[' 22 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXX +++ i=23 +++ '[' 23 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXXX +++ i=24 +++ '[' 24 -lt 24 ']' +++ printf XXXXXXXXXXXXXXXXXXXXXXXX +++ return 0 ++ mktemp -d --tmpdir=/var/lib/jenkins/tmp/ tmp.XXXXXXXXXXXXXXXXXXXXXXXX + TEMP_DIR=/var/lib/jenkins/tmp/tmp.sfYBOYowVGVXPSzz1Hfn7tCo + temp_cleanup+=("${TEMP_DIR}") + mkdir -p -- /var/lib/jenkins/tmp/tmp.sfYBOYowVGVXPSzz1Hfn7tCo/pyhoca-gui + chmod 2770 -Rf -- /var/lib/jenkins/tmp/tmp.sfYBOYowVGVXPSzz1Hfn7tCo + cd /var/lib/jenkins/build/heuler/pyhoca-gui + git clone --no-hardlinks --no-local /var/lib/jenkins/build/heuler/pyhoca-gui /var/lib/jenkins/tmp/tmp.sfYBOYowVGVXPSzz1Hfn7tCo/pyhoca-gui/ Cloning into '/var/lib/jenkins/tmp/tmp.sfYBOYowVGVXPSzz1Hfn7tCo/pyhoca-gui'... + cd /var/lib/jenkins/tmp/tmp.sfYBOYowVGVXPSzz1Hfn7tCo/pyhoca-gui + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + find /var/lib/jenkins/build/heuler/pyhoca-gui/../ -maxdepth 0 -mindepth 0 -type f + grep -qs 'pyhoca-gui_*.orig.tar.gz' ++ gitrevno + GITREV=1408 + SA_OPTION= + test -f debian/source/format + grep -Eqs '^3.0.*$quilt$$' debian/source/format + '[' -n 4 ']' + '[' 4 -gt 3 ']' + typeset -l codename=bullseye + '[' bullseye = sid ']' + typeset numerical_version= + typeset pretty_dist= + typeset -i tmp_ret=1 ++ map_codename_to_numerical_version debian bullseye ++ typeset dist=debian ++ typeset codename_in=bullseye ++ '[' -n 4 ']' ++ '[' 4 -gt 3 ']' ++ typeset -l codename=bullseye ++ '[' bullseye = sid ']' ++ typeset numerical_version= ++ typeset -i ret=1 ++ '[' debian = debian ']' +++ debian-codename-to-version.sh bullseye ++ numerical_version=11 ++ ret=0 ++ echo 11 ++ return 0 + numerical_version=11 + tmp_ret=0 + '[' -n debian ']' + '[' debian = debian ']' + pretty_dist=Debian + '[' -n debian ']' + '[' debian = ubuntu ']' + '[' 0 -ne 0 ']' + '[' -z 11 ']' + '[' xheuler '!=' xmain ']' + mv -- debian/control debian/control.tmp + sed 's,Section:[\ ]*$.*$,Section: heuler/\1,g' debian/control.tmp + '[' heuler '!=' heuler ']' + dch --distribution bullseye --force-distribution -l '~git20191202.1408+11.heuler.' 'Development-Snapshot!!! Auto-built Debian bullseye (11) package for packages.x2go.org repository (Git commit: da3d33a0e8a3cb70650454f629a13c9dd52f66b4).' + typeset -i skip_arch_all=0 + typeset -a arches + arches=() + case "${PLATFORM}" in + arches+=("amd64" "i386") + '[' debian = raspbian ']' + typeset cur_arch= + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/pyhoca-gui/debian/bullseye/amd64 + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/pyhoca-gui/debian/bullseye/i386 + OTHERMIRROR= + '[' xheuler = xheuler ']' + grep -qs pyhoca-gui + OTHERMIRROR='deb http://packages.x2go.org/debian bullseye main heuler' + '[' pyhoca-gui = x2gomatebindings ']' + git --no-pager log --since '2 years ago' '--format=%ai %aN (%h) %n%n%x09*%w(68,0,10) %s%d%n' + typeset -a sbuild_options + sbuild_options=("-n" "--jobs=2" "-sA" "--dist=${codename}" "--keyid=${GPG_KEY}") + '[' 11 -gt 8 ']' + sbuild_options+=("--build-dep-resolver=apt") + sbuild_options+=("--resolve-alternatives") + '[' -n '' ']' + '[' -n 'deb http://packages.x2go.org/debian bullseye main heuler' ']' + sbuild_options+=("--extra-repository=${OTHERMIRROR}") + typeset -a sbuild_options_amd64 sbuild_options_i386 sbuild_options_armhf sbuild_options_powerpc sbuild_options_ppc64 sbuild_options_ppc64el + sbuild_options_amd64=("${sbuild_options[@]}") + sbuild_options_i386=("${sbuild_options[@]}" "--arch=i386" "--debbuildopts=-B") + sbuild_options_armhf=("${sbuild_options[@]}" "--arch=armhf" "--chroot=${codename}-armhf-raspbian-sbuild") + sbuild_options_powerpc=("${sbuild_options[@]}" "--debbuildopts=-B") + sbuild_options_ppc64=("${sbuild_options[@]}" "--arch=ppc64" "--chroot=${codename}-ppc64-sbuild" "--debbuildopts=-B") + sbuild_options_ppc64el=("${sbuild_options[@]}" "--debbuildopts=-B") + typeset base_arch=amd64 + '[' -n amd64 ']' + '[' x '!=' xamd64 ']' + grep -Eqs 'Architecture.*(all|any|amd64)' /var/lib/jenkins/tmp/tmp.sfYBOYowVGVXPSzz1Hfn7tCo/pyhoca-gui/debian/control + typeset -i has_arch_dep=0 + grep -Eqs 'Architecture.*(any|amd64)' /var/lib/jenkins/tmp/tmp.sfYBOYowVGVXPSzz1Hfn7tCo/pyhoca-gui/debian/control + '[' 0 -eq 1 ']' + '[' 0 -eq 0 ']' + typeset 'indirect=sbuild_options_amd64[@]' + typeset -a indirect_resolve + indirect_resolve=("${!indirect}") + cd /var/lib/jenkins/pkg-dist/heuler/pyhoca-gui/debian/bullseye/amd64 + nice sbuild -n --jobs=2 -sA --dist=bullseye --keyid=F4A7678C9C6B0B2B --build-dep-resolver=apt --resolve-alternatives '--extra-repository=deb http://packages.x2go.org/debian bullseye main heuler' /var/lib/jenkins/tmp/tmp.sfYBOYowVGVXPSzz1Hfn7tCo/pyhoca-gui dh clean --with python2 dh: Compatibility levels before 9 are deprecated (level 7 in use) dh_testdir debian/rules override_dh_auto_clean make[1]: Entering directory '/home/_jenkins_/tmp/tmp.sfYBOYowVGVXPSzz1Hfn7tCo/pyhoca-gui' test -f po/PyHoca-GUI.pot.bak && mv po/PyHoca-GUI.pot.bak po/PyHoca-GUI.pot || true rm -Rf PyHoca_GUI.egg-info/ dh_auto_clean dh_auto_clean: Compatibility levels before 9 are deprecated (level 7 in use) python setup.py clean -a File "setup.py", line 29 from __future__ import print_function SyntaxError: from __future__ imports must occur at the beginning of the file dh_auto_clean: python setup.py clean -a returned exit code 1 debian/rules:16: recipe for target 'override_dh_auto_clean' failed make[1]: *** [override_dh_auto_clean] Error 1 make[1]: Leaving directory '/home/_jenkins_/tmp/tmp.sfYBOYowVGVXPSzz1Hfn7tCo/pyhoca-gui' debian/rules:9: recipe for target 'clean' failed make: *** [clean] Error 2 E: Failed to clean source directory /home/_jenkins_/tmp/tmp.sfYBOYowVGVXPSzz1Hfn7tCo/pyhoca-gui (/home/_jenkins_/tmp/tmp.sfYBOYowVGVXPSzz1Hfn7tCo/pyhoca-gui_0.6.0.0-0x2go1~git20191202.1408+11.heuler.1.dsc) + cleanup + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n '' ']' + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.sfYBOYowVGVXPSzz1Hfn7tCo ']' + '[' -d /var/lib/jenkins/tmp/tmp.sfYBOYowVGVXPSzz1Hfn7tCo ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.sfYBOYowVGVXPSzz1Hfn7tCo Build step 'Execute shell' marked build as failure

1 4

Build failed in Jenkins: pyhoca-gui+nightly+raspbian-stretch #28
by jenkins＠x2go.org 05 Dec '19

05 Dec '19

See <https://jenkins.x2go.org:8443/job/pyhoca-gui+nightly+raspbian-stretch/28/di…> Changes: [mike.gabriel] PyHocaGUI.OnExit(): Return an exitcode. [mike.gabriel] run 2to3 on this project [mike.gabriel] More porting to Python 3 (manually). [mike.gabriel] wxgui/profilemanager.py: Capture failures that might occur when writing [mike.gabriel] Menu.Append{,Menu}() calls: Turn arguments into positional arguments. [mike.gabriel] Port to wxPython 4.0.x. [mike.gabriel] pyhoca/wxgui/{logon.py,passphrase.py}: Merge code of both files into [mike.gabriel] debian/changelog: update from Git history [mike.gabriel] debian/control: Switch from Py2 to Py3 (B-Ds and Ds). ------------------------------------------ [...truncated 7.46 KB...] + IFS=' ' + read -a deb_build_for_arr + IFS=' ' + typeset line= + for line in "${deb_build_for_arr[@]}" ++ cut -d: -f1 ++ tr '[:upper:]' '[:lower:]' + l_DIST=raspbian + l_CODENAMES=stretch + grep -qs raspbian + for l_CODENAME in ${l_CODENAMES} + test -z stretch + grep stretch raspbian:stretch +++ repeat_str X 24 +++ typeset INPUT=X +++ typeset COUNT=24 +++ typeset ret= +++ typeset -i i=0 +++ '[' 0 -lt 24 ']' ++++ printf X +++ ret=X +++ i=1 +++ '[' 1 -lt 24 ']' ++++ printf X +++ ret=XX +++ i=2 +++ '[' 2 -lt 24 ']' ++++ printf X +++ ret=XXX +++ i=3 +++ '[' 3 -lt 24 ']' ++++ printf X +++ ret=XXXX +++ i=4 +++ '[' 4 -lt 24 ']' ++++ printf X +++ ret=XXXXX +++ i=5 +++ '[' 5 -lt 24 ']' ++++ printf X +++ ret=XXXXXX +++ i=6 +++ '[' 6 -lt 24 ']' ++++ printf X +++ ret=XXXXXXX +++ i=7 +++ '[' 7 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXX +++ i=8 +++ '[' 8 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXX +++ i=9 +++ '[' 9 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXX +++ i=10 +++ '[' 10 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXX +++ i=11 +++ '[' 11 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXX +++ i=12 +++ '[' 12 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXX +++ i=13 +++ '[' 13 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXX +++ i=14 +++ '[' 14 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXX +++ i=15 +++ '[' 15 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXX +++ i=16 +++ '[' 16 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXX +++ i=17 +++ '[' 17 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXX +++ i=18 +++ '[' 18 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXX +++ i=19 +++ '[' 19 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXX +++ i=20 +++ '[' 20 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXX +++ i=21 +++ '[' 21 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXX +++ i=22 +++ '[' 22 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXX +++ i=23 +++ '[' 23 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXXX +++ i=24 +++ '[' 24 -lt 24 ']' +++ printf XXXXXXXXXXXXXXXXXXXXXXXX +++ return 0 ++ mktemp -d --tmpdir=/var/lib/jenkins/tmp/ tmp.XXXXXXXXXXXXXXXXXXXXXXXX + TEMP_DIR=/var/lib/jenkins/tmp/tmp.cViKS0vLU0BtUpIDFm6S0UJF + temp_cleanup+=("${TEMP_DIR}") + mkdir -p -- /var/lib/jenkins/tmp/tmp.cViKS0vLU0BtUpIDFm6S0UJF/pyhoca-gui + chmod 2770 -Rf -- /var/lib/jenkins/tmp/tmp.cViKS0vLU0BtUpIDFm6S0UJF + cd /var/lib/jenkins/build/heuler/pyhoca-gui + git clone --no-hardlinks --no-local /var/lib/jenkins/build/heuler/pyhoca-gui /var/lib/jenkins/tmp/tmp.cViKS0vLU0BtUpIDFm6S0UJF/pyhoca-gui/ Cloning into '/var/lib/jenkins/tmp/tmp.cViKS0vLU0BtUpIDFm6S0UJF/pyhoca-gui'... + cd /var/lib/jenkins/tmp/tmp.cViKS0vLU0BtUpIDFm6S0UJF/pyhoca-gui + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + find /var/lib/jenkins/build/heuler/pyhoca-gui/../ -maxdepth 0 -mindepth 0 -type f + grep -qs 'pyhoca-gui_*.orig.tar.gz' ++ gitrevno + GITREV=1408 + SA_OPTION= + test -f debian/source/format + grep -Eqs '^3.0.*$quilt$$' debian/source/format + '[' -n 4 ']' + '[' 4 -gt 3 ']' + typeset -l codename=stretch + '[' stretch = sid ']' + typeset numerical_version= + typeset pretty_dist= + typeset -i tmp_ret=1 ++ map_codename_to_numerical_version raspbian stretch ++ typeset dist=raspbian ++ typeset codename_in=stretch ++ '[' -n 4 ']' ++ '[' 4 -gt 3 ']' ++ typeset -l codename=stretch ++ '[' stretch = sid ']' ++ typeset numerical_version= ++ typeset -i ret=1 ++ '[' raspbian = debian ']' ++ '[' raspbian = raspbian ']' +++ debian-codename-to-version.sh stretch ++ numerical_version=9 ++ ret=0 ++ echo 9 ++ return 0 + numerical_version=9 + tmp_ret=0 + '[' -n raspbian ']' + '[' raspbian = debian ']' + '[' raspbian = raspbian ']' + pretty_dist=Debian + '[' -n raspbian ']' + '[' raspbian = ubuntu ']' + '[' 0 -ne 0 ']' + '[' -z 9 ']' + '[' xheuler '!=' xmain ']' + mv -- debian/control debian/control.tmp + sed 's,Section:[\ ]*$.*$,Section: heuler/\1,g' debian/control.tmp + '[' heuler '!=' heuler ']' + dch --distribution stretch --force-distribution -l '~git20191202.1408+9.heuler.' 'Development-Snapshot!!! Auto-built Debian stretch (9) package for packages.x2go.org repository (Git commit: da3d33a0e8a3cb70650454f629a13c9dd52f66b4).' + typeset -i skip_arch_all=0 + typeset -a arches + arches=() + case "${PLATFORM}" in + arches+=("amd64" "i386") + '[' raspbian = raspbian ']' + arches=("armhf") + typeset cur_arch= + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/pyhoca-gui/raspbian/stretch/armhf + OTHERMIRROR= + '[' xheuler = xheuler ']' + grep -qs pyhoca-gui + OTHERMIRROR='deb http://packages.x2go.org/raspbian stretch main heuler' + '[' pyhoca-gui = x2gomatebindings ']' + git --no-pager log --since '2 years ago' '--format=%ai %aN (%h) %n%n%x09*%w(68,0,10) %s%d%n' + typeset -a sbuild_options + sbuild_options=("-n" "--jobs=2" "-sA" "--dist=${codename}" "--keyid=${GPG_KEY}") + '[' 9 -gt 8 ']' + sbuild_options+=("--build-dep-resolver=apt") + sbuild_options+=("--resolve-alternatives") + '[' -n '' ']' + '[' -n 'deb http://packages.x2go.org/raspbian stretch main heuler' ']' + sbuild_options+=("--extra-repository=${OTHERMIRROR}") + typeset -a sbuild_options_amd64 sbuild_options_i386 sbuild_options_armhf sbuild_options_powerpc sbuild_options_ppc64 sbuild_options_ppc64el + sbuild_options_amd64=("${sbuild_options[@]}") + sbuild_options_i386=("${sbuild_options[@]}" "--arch=i386" "--debbuildopts=-B") + sbuild_options_armhf=("${sbuild_options[@]}" "--arch=armhf" "--chroot=${codename}-armhf-raspbian-sbuild") + sbuild_options_powerpc=("${sbuild_options[@]}" "--debbuildopts=-B") + sbuild_options_ppc64=("${sbuild_options[@]}" "--arch=ppc64" "--chroot=${codename}-ppc64-sbuild" "--debbuildopts=-B") + sbuild_options_ppc64el=("${sbuild_options[@]}" "--debbuildopts=-B") + typeset base_arch=armhf + '[' -n armhf ']' + '[' x '!=' xarmhf ']' + grep -Eqs 'Architecture.*(all|any|armhf)' /var/lib/jenkins/tmp/tmp.cViKS0vLU0BtUpIDFm6S0UJF/pyhoca-gui/debian/control + typeset -i has_arch_dep=0 + grep -Eqs 'Architecture.*(any|armhf)' /var/lib/jenkins/tmp/tmp.cViKS0vLU0BtUpIDFm6S0UJF/pyhoca-gui/debian/control + '[' 0 -eq 1 ']' + '[' 0 -eq 0 ']' + typeset 'indirect=sbuild_options_armhf[@]' + typeset -a indirect_resolve + indirect_resolve=("${!indirect}") + cd /var/lib/jenkins/pkg-dist/heuler/pyhoca-gui/raspbian/stretch/armhf + nice sbuild -n --jobs=2 -sA --dist=stretch --keyid=F4A7678C9C6B0B2B --build-dep-resolver=apt --resolve-alternatives '--extra-repository=deb http://packages.x2go.org/raspbian stretch main heuler' --arch=armhf --chroot=stretch-armhf-raspbian-sbuild /var/lib/jenkins/tmp/tmp.cViKS0vLU0BtUpIDFm6S0UJF/pyhoca-gui dh clean --with python2 dh: Compatibility levels before 9 are deprecated (level 7 in use) dh_testdir debian/rules override_dh_auto_clean make[1]: Entering directory '/home/_jenkins_/tmp/tmp.cViKS0vLU0BtUpIDFm6S0UJF/pyhoca-gui' test -f po/PyHoca-GUI.pot.bak && mv po/PyHoca-GUI.pot.bak po/PyHoca-GUI.pot || true rm -Rf PyHoca_GUI.egg-info/ dh_auto_clean dh_auto_clean: Compatibility levels before 9 are deprecated (level 7 in use) python setup.py clean -a File "setup.py", line 29 from __future__ import print_function SyntaxError: from __future__ imports must occur at the beginning of the file dh_auto_clean: python setup.py clean -a returned exit code 1 debian/rules:16: recipe for target 'override_dh_auto_clean' failed make[1]: *** [override_dh_auto_clean] Error 1 make[1]: Leaving directory '/home/_jenkins_/tmp/tmp.cViKS0vLU0BtUpIDFm6S0UJF/pyhoca-gui' debian/rules:9: recipe for target 'clean' failed make: *** [clean] Error 2 E: Failed to clean source directory /home/_jenkins_/tmp/tmp.cViKS0vLU0BtUpIDFm6S0UJF/pyhoca-gui (/home/_jenkins_/tmp/tmp.cViKS0vLU0BtUpIDFm6S0UJF/pyhoca-gui_0.6.0.0-0x2go1~git20191202.1408+9.heuler.1.dsc) + cleanup + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n '' ']' + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.cViKS0vLU0BtUpIDFm6S0UJF ']' + '[' -d /var/lib/jenkins/tmp/tmp.cViKS0vLU0BtUpIDFm6S0UJF ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.cViKS0vLU0BtUpIDFm6S0UJF Build step 'Execute shell' marked build as failure

1 3

Build failed in Jenkins: pyhoca-gui+nightly+raspbian-buster #4
by jenkins＠x2go.org 05 Dec '19

05 Dec '19

See <https://jenkins.x2go.org:8443/job/pyhoca-gui+nightly+raspbian-buster/4/disp…> Changes: [mike.gabriel] PyHocaGUI.OnExit(): Return an exitcode. [mike.gabriel] run 2to3 on this project [mike.gabriel] More porting to Python 3 (manually). [mike.gabriel] wxgui/profilemanager.py: Capture failures that might occur when writing [mike.gabriel] Menu.Append{,Menu}() calls: Turn arguments into positional arguments. [mike.gabriel] Port to wxPython 4.0.x. [mike.gabriel] pyhoca/wxgui/{logon.py,passphrase.py}: Merge code of both files into [mike.gabriel] debian/changelog: update from Git history [mike.gabriel] debian/control: Switch from Py2 to Py3 (B-Ds and Ds). ------------------------------------------ [...truncated 7.44 KB...] + IFS=' ' + read -a deb_build_for_arr + IFS=' ' + typeset line= + for line in "${deb_build_for_arr[@]}" ++ cut -d: -f1 ++ tr '[:upper:]' '[:lower:]' + l_DIST=raspbian + l_CODENAMES=buster + grep -qs raspbian + for l_CODENAME in ${l_CODENAMES} + test -z buster + grep buster raspbian:buster +++ repeat_str X 24 +++ typeset INPUT=X +++ typeset COUNT=24 +++ typeset ret= +++ typeset -i i=0 +++ '[' 0 -lt 24 ']' ++++ printf X +++ ret=X +++ i=1 +++ '[' 1 -lt 24 ']' ++++ printf X +++ ret=XX +++ i=2 +++ '[' 2 -lt 24 ']' ++++ printf X +++ ret=XXX +++ i=3 +++ '[' 3 -lt 24 ']' ++++ printf X +++ ret=XXXX +++ i=4 +++ '[' 4 -lt 24 ']' ++++ printf X +++ ret=XXXXX +++ i=5 +++ '[' 5 -lt 24 ']' ++++ printf X +++ ret=XXXXXX +++ i=6 +++ '[' 6 -lt 24 ']' ++++ printf X +++ ret=XXXXXXX +++ i=7 +++ '[' 7 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXX +++ i=8 +++ '[' 8 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXX +++ i=9 +++ '[' 9 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXX +++ i=10 +++ '[' 10 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXX +++ i=11 +++ '[' 11 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXX +++ i=12 +++ '[' 12 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXX +++ i=13 +++ '[' 13 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXX +++ i=14 +++ '[' 14 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXX +++ i=15 +++ '[' 15 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXX +++ i=16 +++ '[' 16 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXX +++ i=17 +++ '[' 17 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXX +++ i=18 +++ '[' 18 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXX +++ i=19 +++ '[' 19 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXX +++ i=20 +++ '[' 20 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXX +++ i=21 +++ '[' 21 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXX +++ i=22 +++ '[' 22 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXX +++ i=23 +++ '[' 23 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXXX +++ i=24 +++ '[' 24 -lt 24 ']' +++ printf XXXXXXXXXXXXXXXXXXXXXXXX +++ return 0 ++ mktemp -d --tmpdir=/var/lib/jenkins/tmp/ tmp.XXXXXXXXXXXXXXXXXXXXXXXX + TEMP_DIR=/var/lib/jenkins/tmp/tmp.3HQu0fgsRRvFBP5DM6x8ArOk + temp_cleanup+=("${TEMP_DIR}") + mkdir -p -- /var/lib/jenkins/tmp/tmp.3HQu0fgsRRvFBP5DM6x8ArOk/pyhoca-gui + chmod 2770 -Rf -- /var/lib/jenkins/tmp/tmp.3HQu0fgsRRvFBP5DM6x8ArOk + cd /var/lib/jenkins/build/heuler/pyhoca-gui + git clone --no-hardlinks --no-local /var/lib/jenkins/build/heuler/pyhoca-gui /var/lib/jenkins/tmp/tmp.3HQu0fgsRRvFBP5DM6x8ArOk/pyhoca-gui/ Cloning into '/var/lib/jenkins/tmp/tmp.3HQu0fgsRRvFBP5DM6x8ArOk/pyhoca-gui'... + cd /var/lib/jenkins/tmp/tmp.3HQu0fgsRRvFBP5DM6x8ArOk/pyhoca-gui + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + find /var/lib/jenkins/build/heuler/pyhoca-gui/../ -maxdepth 0 -mindepth 0 -type f + grep -qs 'pyhoca-gui_*.orig.tar.gz' ++ gitrevno + GITREV=1408 + SA_OPTION= + test -f debian/source/format + grep -Eqs '^3.0.*$quilt$$' debian/source/format + '[' -n 4 ']' + '[' 4 -gt 3 ']' + typeset -l codename=buster + '[' buster = sid ']' + typeset numerical_version= + typeset pretty_dist= + typeset -i tmp_ret=1 ++ map_codename_to_numerical_version raspbian buster ++ typeset dist=raspbian ++ typeset codename_in=buster ++ '[' -n 4 ']' ++ '[' 4 -gt 3 ']' ++ typeset -l codename=buster ++ '[' buster = sid ']' ++ typeset numerical_version= ++ typeset -i ret=1 ++ '[' raspbian = debian ']' ++ '[' raspbian = raspbian ']' +++ debian-codename-to-version.sh buster ++ numerical_version=10 ++ ret=0 ++ echo 10 ++ return 0 + numerical_version=10 + tmp_ret=0 + '[' -n raspbian ']' + '[' raspbian = debian ']' + '[' raspbian = raspbian ']' + pretty_dist=Debian + '[' -n raspbian ']' + '[' raspbian = ubuntu ']' + '[' 0 -ne 0 ']' + '[' -z 10 ']' + '[' xheuler '!=' xmain ']' + mv -- debian/control debian/control.tmp + sed 's,Section:[\ ]*$.*$,Section: heuler/\1,g' debian/control.tmp + '[' heuler '!=' heuler ']' + dch --distribution buster --force-distribution -l '~git20191202.1408+10.heuler.' 'Development-Snapshot!!! Auto-built Debian buster (10) package for packages.x2go.org repository (Git commit: da3d33a0e8a3cb70650454f629a13c9dd52f66b4).' + typeset -i skip_arch_all=0 + typeset -a arches + arches=() + case "${PLATFORM}" in + arches+=("amd64" "i386") + '[' raspbian = raspbian ']' + arches=("armhf") + typeset cur_arch= + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/pyhoca-gui/raspbian/buster/armhf + OTHERMIRROR= + '[' xheuler = xheuler ']' + grep -qs pyhoca-gui + OTHERMIRROR='deb http://packages.x2go.org/raspbian buster main heuler' + '[' pyhoca-gui = x2gomatebindings ']' + git --no-pager log --since '2 years ago' '--format=%ai %aN (%h) %n%n%x09*%w(68,0,10) %s%d%n' + typeset -a sbuild_options + sbuild_options=("-n" "--jobs=2" "-sA" "--dist=${codename}" "--keyid=${GPG_KEY}") + '[' 10 -gt 8 ']' + sbuild_options+=("--build-dep-resolver=apt") + sbuild_options+=("--resolve-alternatives") + '[' -n '' ']' + '[' -n 'deb http://packages.x2go.org/raspbian buster main heuler' ']' + sbuild_options+=("--extra-repository=${OTHERMIRROR}") + typeset -a sbuild_options_amd64 sbuild_options_i386 sbuild_options_armhf sbuild_options_powerpc sbuild_options_ppc64 sbuild_options_ppc64el + sbuild_options_amd64=("${sbuild_options[@]}") + sbuild_options_i386=("${sbuild_options[@]}" "--arch=i386" "--debbuildopts=-B") + sbuild_options_armhf=("${sbuild_options[@]}" "--arch=armhf" "--chroot=${codename}-armhf-raspbian-sbuild") + sbuild_options_powerpc=("${sbuild_options[@]}" "--debbuildopts=-B") + sbuild_options_ppc64=("${sbuild_options[@]}" "--arch=ppc64" "--chroot=${codename}-ppc64-sbuild" "--debbuildopts=-B") + sbuild_options_ppc64el=("${sbuild_options[@]}" "--debbuildopts=-B") + typeset base_arch=armhf + '[' -n armhf ']' + '[' x '!=' xarmhf ']' + grep -Eqs 'Architecture.*(all|any|armhf)' /var/lib/jenkins/tmp/tmp.3HQu0fgsRRvFBP5DM6x8ArOk/pyhoca-gui/debian/control + typeset -i has_arch_dep=0 + grep -Eqs 'Architecture.*(any|armhf)' /var/lib/jenkins/tmp/tmp.3HQu0fgsRRvFBP5DM6x8ArOk/pyhoca-gui/debian/control + '[' 0 -eq 1 ']' + '[' 0 -eq 0 ']' + typeset 'indirect=sbuild_options_armhf[@]' + typeset -a indirect_resolve + indirect_resolve=("${!indirect}") + cd /var/lib/jenkins/pkg-dist/heuler/pyhoca-gui/raspbian/buster/armhf + nice sbuild -n --jobs=2 -sA --dist=buster --keyid=F4A7678C9C6B0B2B --build-dep-resolver=apt --resolve-alternatives '--extra-repository=deb http://packages.x2go.org/raspbian buster main heuler' --arch=armhf --chroot=buster-armhf-raspbian-sbuild /var/lib/jenkins/tmp/tmp.3HQu0fgsRRvFBP5DM6x8ArOk/pyhoca-gui dh clean --with python2 dh: Compatibility levels before 9 are deprecated (level 7 in use) dh_testdir debian/rules override_dh_auto_clean make[1]: Entering directory '/home/_jenkins_/tmp/tmp.3HQu0fgsRRvFBP5DM6x8ArOk/pyhoca-gui' test -f po/PyHoca-GUI.pot.bak && mv po/PyHoca-GUI.pot.bak po/PyHoca-GUI.pot || true rm -Rf PyHoca_GUI.egg-info/ dh_auto_clean dh_auto_clean: Compatibility levels before 9 are deprecated (level 7 in use) python setup.py clean -a File "setup.py", line 29 from __future__ import print_function SyntaxError: from __future__ imports must occur at the beginning of the file dh_auto_clean: python setup.py clean -a returned exit code 1 debian/rules:16: recipe for target 'override_dh_auto_clean' failed make[1]: *** [override_dh_auto_clean] Error 1 make[1]: Leaving directory '/home/_jenkins_/tmp/tmp.3HQu0fgsRRvFBP5DM6x8ArOk/pyhoca-gui' debian/rules:9: recipe for target 'clean' failed make: *** [clean] Error 2 E: Failed to clean source directory /home/_jenkins_/tmp/tmp.3HQu0fgsRRvFBP5DM6x8ArOk/pyhoca-gui (/home/_jenkins_/tmp/tmp.3HQu0fgsRRvFBP5DM6x8ArOk/pyhoca-gui_0.6.0.0-0x2go1~git20191202.1408+10.heuler.1.dsc) + cleanup + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n '' ']' + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.3HQu0fgsRRvFBP5DM6x8ArOk ']' + '[' -d /var/lib/jenkins/tmp/tmp.3HQu0fgsRRvFBP5DM6x8ArOk ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.3HQu0fgsRRvFBP5DM6x8ArOk Build step 'Execute shell' marked build as failure

1 4

Build failed in Jenkins: pyhoca-gui+nightly+debian-sid #159
by jenkins＠x2go.org 05 Dec '19

05 Dec '19

See <https://jenkins.x2go.org:8443/job/pyhoca-gui+nightly+debian-sid/159/display…> Changes: [mike.gabriel] PyHocaGUI.OnExit(): Return an exitcode. [mike.gabriel] run 2to3 on this project [mike.gabriel] More porting to Python 3 (manually). [mike.gabriel] wxgui/profilemanager.py: Capture failures that might occur when writing [mike.gabriel] Menu.Append{,Menu}() calls: Turn arguments into positional arguments. [mike.gabriel] Port to wxPython 4.0.x. [mike.gabriel] pyhoca/wxgui/{logon.py,passphrase.py}: Merge code of both files into [mike.gabriel] debian/changelog: update from Git history [mike.gabriel] debian/control: Switch from Py2 to Py3 (B-Ds and Ds). ------------------------------------------ [...truncated 7.96 KB...] + IFS=' ' + read -a deb_build_for_arr + IFS=' ' + typeset line= + for line in "${deb_build_for_arr[@]}" ++ cut -d: -f1 ++ tr '[:upper:]' '[:lower:]' + l_DIST=debian + l_CODENAMES=sid + grep -qs debian + for l_CODENAME in ${l_CODENAMES} + test -z sid + grep sid debian:sid +++ repeat_str X 24 +++ typeset INPUT=X +++ typeset COUNT=24 +++ typeset ret= +++ typeset -i i=0 +++ '[' 0 -lt 24 ']' ++++ printf X +++ ret=X +++ i=1 +++ '[' 1 -lt 24 ']' ++++ printf X +++ ret=XX +++ i=2 +++ '[' 2 -lt 24 ']' ++++ printf X +++ ret=XXX +++ i=3 +++ '[' 3 -lt 24 ']' ++++ printf X +++ ret=XXXX +++ i=4 +++ '[' 4 -lt 24 ']' ++++ printf X +++ ret=XXXXX +++ i=5 +++ '[' 5 -lt 24 ']' ++++ printf X +++ ret=XXXXXX +++ i=6 +++ '[' 6 -lt 24 ']' ++++ printf X +++ ret=XXXXXXX +++ i=7 +++ '[' 7 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXX +++ i=8 +++ '[' 8 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXX +++ i=9 +++ '[' 9 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXX +++ i=10 +++ '[' 10 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXX +++ i=11 +++ '[' 11 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXX +++ i=12 +++ '[' 12 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXX +++ i=13 +++ '[' 13 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXX +++ i=14 +++ '[' 14 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXX +++ i=15 +++ '[' 15 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXX +++ i=16 +++ '[' 16 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXX +++ i=17 +++ '[' 17 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXX +++ i=18 +++ '[' 18 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXX +++ i=19 +++ '[' 19 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXX +++ i=20 +++ '[' 20 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXX +++ i=21 +++ '[' 21 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXX +++ i=22 +++ '[' 22 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXX +++ i=23 +++ '[' 23 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXXX +++ i=24 +++ '[' 24 -lt 24 ']' +++ printf XXXXXXXXXXXXXXXXXXXXXXXX +++ return 0 ++ mktemp -d --tmpdir=/var/lib/jenkins/tmp/ tmp.XXXXXXXXXXXXXXXXXXXXXXXX + TEMP_DIR=/var/lib/jenkins/tmp/tmp.8kqSxdxxgZ2don7VnRAmnC9k + temp_cleanup+=("${TEMP_DIR}") + mkdir -p -- /var/lib/jenkins/tmp/tmp.8kqSxdxxgZ2don7VnRAmnC9k/pyhoca-gui + chmod 2770 -Rf -- /var/lib/jenkins/tmp/tmp.8kqSxdxxgZ2don7VnRAmnC9k + cd /var/lib/jenkins/build/heuler/pyhoca-gui + git clone --no-hardlinks --no-local /var/lib/jenkins/build/heuler/pyhoca-gui /var/lib/jenkins/tmp/tmp.8kqSxdxxgZ2don7VnRAmnC9k/pyhoca-gui/ Cloning into '/var/lib/jenkins/tmp/tmp.8kqSxdxxgZ2don7VnRAmnC9k/pyhoca-gui'... + cd /var/lib/jenkins/tmp/tmp.8kqSxdxxgZ2don7VnRAmnC9k/pyhoca-gui + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + find /var/lib/jenkins/build/heuler/pyhoca-gui/../ -maxdepth 0 -mindepth 0 -type f + grep -qs 'pyhoca-gui_*.orig.tar.gz' ++ gitrevno + GITREV=1408 + SA_OPTION= + test -f debian/source/format + grep -Eqs '^3.0.*$quilt$$' debian/source/format + '[' -n 4 ']' + '[' 4 -gt 3 ']' + typeset -l codename=sid + '[' sid = sid ']' + codename=unstable + typeset numerical_version= + typeset pretty_dist= + typeset -i tmp_ret=1 ++ map_codename_to_numerical_version debian unstable ++ typeset dist=debian ++ typeset codename_in=unstable ++ '[' -n 4 ']' ++ '[' 4 -gt 3 ']' ++ typeset -l codename=unstable ++ '[' unstable = sid ']' ++ typeset numerical_version= ++ typeset -i ret=1 ++ '[' debian = debian ']' +++ debian-codename-to-version.sh unstable ++ numerical_version=9999 ++ ret=0 ++ echo 9999 ++ return 0 + numerical_version=9999 + tmp_ret=0 + '[' -n debian ']' + '[' debian = debian ']' + pretty_dist=Debian + '[' -n debian ']' + '[' debian = ubuntu ']' + '[' 0 -ne 0 ']' + '[' -z 9999 ']' + '[' xheuler '!=' xmain ']' + mv -- debian/control debian/control.tmp + sed 's,Section:[\ ]*$.*$,Section: heuler/\1,g' debian/control.tmp + '[' heuler '!=' heuler ']' + dch --distribution unstable --force-distribution -l '~git20191202.1408+9999.heuler.' 'Development-Snapshot!!! Auto-built Debian sid (9999) package for packages.x2go.org repository (Git commit: da3d33a0e8a3cb70650454f629a13c9dd52f66b4).' + typeset -i skip_arch_all=0 + typeset -a arches + arches=() + case "${PLATFORM}" in + arches+=("amd64" "i386") + '[' debian = raspbian ']' + typeset cur_arch= + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/pyhoca-gui/debian/sid/amd64 + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/pyhoca-gui/debian/sid/i386 + OTHERMIRROR= + '[' xheuler = xheuler ']' + grep -qs pyhoca-gui + OTHERMIRROR='deb http://packages.x2go.org/debian sid main heuler' + '[' pyhoca-gui = x2gomatebindings ']' + git --no-pager log --since '2 years ago' '--format=%ai %aN (%h) %n%n%x09*%w(68,0,10) %s%d%n' + typeset -a sbuild_options + sbuild_options=("-n" "--jobs=2" "-sA" "--dist=${codename}" "--keyid=${GPG_KEY}") + '[' 9999 -gt 8 ']' + sbuild_options+=("--build-dep-resolver=apt") + sbuild_options+=("--resolve-alternatives") + '[' -n '' ']' + '[' -n 'deb http://packages.x2go.org/debian sid main heuler' ']' + sbuild_options+=("--extra-repository=${OTHERMIRROR}") + typeset -a sbuild_options_amd64 sbuild_options_i386 sbuild_options_armhf sbuild_options_powerpc sbuild_options_ppc64 sbuild_options_ppc64el + sbuild_options_amd64=("${sbuild_options[@]}") + sbuild_options_i386=("${sbuild_options[@]}" "--arch=i386" "--debbuildopts=-B") + sbuild_options_armhf=("${sbuild_options[@]}" "--arch=armhf" "--chroot=${codename}-armhf-raspbian-sbuild") + sbuild_options_powerpc=("${sbuild_options[@]}" "--debbuildopts=-B") + sbuild_options_ppc64=("${sbuild_options[@]}" "--arch=ppc64" "--chroot=${codename}-ppc64-sbuild" "--debbuildopts=-B") + sbuild_options_ppc64el=("${sbuild_options[@]}" "--debbuildopts=-B") + typeset base_arch=amd64 + '[' -n amd64 ']' + '[' x '!=' xamd64 ']' + grep -Eqs 'Architecture.*(all|any|amd64)' /var/lib/jenkins/tmp/tmp.8kqSxdxxgZ2don7VnRAmnC9k/pyhoca-gui/debian/control + typeset -i has_arch_dep=0 + grep -Eqs 'Architecture.*(any|amd64)' /var/lib/jenkins/tmp/tmp.8kqSxdxxgZ2don7VnRAmnC9k/pyhoca-gui/debian/control + '[' 0 -eq 1 ']' + '[' 0 -eq 0 ']' + typeset 'indirect=sbuild_options_amd64[@]' + typeset -a indirect_resolve + indirect_resolve=("${!indirect}") + cd /var/lib/jenkins/pkg-dist/heuler/pyhoca-gui/debian/sid/amd64 + nice sbuild -n --jobs=2 -sA --dist=unstable --keyid=F4A7678C9C6B0B2B --build-dep-resolver=apt --resolve-alternatives '--extra-repository=deb http://packages.x2go.org/debian sid main heuler' /var/lib/jenkins/tmp/tmp.8kqSxdxxgZ2don7VnRAmnC9k/pyhoca-gui dh clean --with python2 dh: Compatibility levels before 9 are deprecated (level 7 in use) dh_testdir debian/rules override_dh_auto_clean make[1]: Entering directory '/home/_jenkins_/tmp/tmp.8kqSxdxxgZ2don7VnRAmnC9k/pyhoca-gui' test -f po/PyHoca-GUI.pot.bak && mv po/PyHoca-GUI.pot.bak po/PyHoca-GUI.pot || true rm -Rf PyHoca_GUI.egg-info/ dh_auto_clean dh_auto_clean: Compatibility levels before 9 are deprecated (level 7 in use) python setup.py clean -a File "setup.py", line 29 from __future__ import print_function SyntaxError: from __future__ imports must occur at the beginning of the file dh_auto_clean: python setup.py clean -a returned exit code 1 debian/rules:16: recipe for target 'override_dh_auto_clean' failed make[1]: *** [override_dh_auto_clean] Error 1 make[1]: Leaving directory '/home/_jenkins_/tmp/tmp.8kqSxdxxgZ2don7VnRAmnC9k/pyhoca-gui' debian/rules:9: recipe for target 'clean' failed make: *** [clean] Error 2 E: Failed to clean source directory /home/_jenkins_/tmp/tmp.8kqSxdxxgZ2don7VnRAmnC9k/pyhoca-gui (/home/_jenkins_/tmp/tmp.8kqSxdxxgZ2don7VnRAmnC9k/pyhoca-gui_0.6.0.0-0x2go1~git20191202.1408+9999.heuler.1.dsc) + cleanup + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n '' ']' + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.8kqSxdxxgZ2don7VnRAmnC9k ']' + '[' -d /var/lib/jenkins/tmp/tmp.8kqSxdxxgZ2don7VnRAmnC9k ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.8kqSxdxxgZ2don7VnRAmnC9k Build step 'Execute shell' marked build as failure

1 5

Build failed in Jenkins: pyhoca-gui+nightly+debian-buster #28
by jenkins＠x2go.org 05 Dec '19

05 Dec '19

See <https://jenkins.x2go.org:8443/job/pyhoca-gui+nightly+debian-buster/28/displ…> Changes: [mike.gabriel] PyHocaGUI.OnExit(): Return an exitcode. [mike.gabriel] run 2to3 on this project [mike.gabriel] More porting to Python 3 (manually). [mike.gabriel] wxgui/profilemanager.py: Capture failures that might occur when writing [mike.gabriel] Menu.Append{,Menu}() calls: Turn arguments into positional arguments. [mike.gabriel] Port to wxPython 4.0.x. [mike.gabriel] pyhoca/wxgui/{logon.py,passphrase.py}: Merge code of both files into [mike.gabriel] debian/changelog: update from Git history [mike.gabriel] debian/control: Switch from Py2 to Py3 (B-Ds and Ds). ------------------------------------------ [...truncated 8.00 KB...] ' + IFS=' ' + read -a deb_build_for_arr + IFS=' ' + typeset line= + for line in "${deb_build_for_arr[@]}" ++ cut -d: -f1 ++ tr '[:upper:]' '[:lower:]' + l_DIST=debian + l_CODENAMES=buster + grep -qs debian + for l_CODENAME in ${l_CODENAMES} + test -z buster + grep buster debian:buster +++ repeat_str X 24 +++ typeset INPUT=X +++ typeset COUNT=24 +++ typeset ret= +++ typeset -i i=0 +++ '[' 0 -lt 24 ']' ++++ printf X +++ ret=X +++ i=1 +++ '[' 1 -lt 24 ']' ++++ printf X +++ ret=XX +++ i=2 +++ '[' 2 -lt 24 ']' ++++ printf X +++ ret=XXX +++ i=3 +++ '[' 3 -lt 24 ']' ++++ printf X +++ ret=XXXX +++ i=4 +++ '[' 4 -lt 24 ']' ++++ printf X +++ ret=XXXXX +++ i=5 +++ '[' 5 -lt 24 ']' ++++ printf X +++ ret=XXXXXX +++ i=6 +++ '[' 6 -lt 24 ']' ++++ printf X +++ ret=XXXXXXX +++ i=7 +++ '[' 7 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXX +++ i=8 +++ '[' 8 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXX +++ i=9 +++ '[' 9 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXX +++ i=10 +++ '[' 10 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXX +++ i=11 +++ '[' 11 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXX +++ i=12 +++ '[' 12 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXX +++ i=13 +++ '[' 13 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXX +++ i=14 +++ '[' 14 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXX +++ i=15 +++ '[' 15 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXX +++ i=16 +++ '[' 16 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXX +++ i=17 +++ '[' 17 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXX +++ i=18 +++ '[' 18 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXX +++ i=19 +++ '[' 19 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXX +++ i=20 +++ '[' 20 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXX +++ i=21 +++ '[' 21 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXX +++ i=22 +++ '[' 22 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXX +++ i=23 +++ '[' 23 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXXX +++ i=24 +++ '[' 24 -lt 24 ']' +++ printf XXXXXXXXXXXXXXXXXXXXXXXX +++ return 0 ++ mktemp -d --tmpdir=/var/lib/jenkins/tmp/ tmp.XXXXXXXXXXXXXXXXXXXXXXXX + TEMP_DIR=/var/lib/jenkins/tmp/tmp.xen04rC3NQC7dOsdUGwZxhgJ + temp_cleanup+=("${TEMP_DIR}") + mkdir -p -- /var/lib/jenkins/tmp/tmp.xen04rC3NQC7dOsdUGwZxhgJ/pyhoca-gui + chmod 2770 -Rf -- /var/lib/jenkins/tmp/tmp.xen04rC3NQC7dOsdUGwZxhgJ + cd /var/lib/jenkins/build/heuler/pyhoca-gui + git clone --no-hardlinks --no-local /var/lib/jenkins/build/heuler/pyhoca-gui /var/lib/jenkins/tmp/tmp.xen04rC3NQC7dOsdUGwZxhgJ/pyhoca-gui/ Cloning into '/var/lib/jenkins/tmp/tmp.xen04rC3NQC7dOsdUGwZxhgJ/pyhoca-gui'... + cd /var/lib/jenkins/tmp/tmp.xen04rC3NQC7dOsdUGwZxhgJ/pyhoca-gui + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + find /var/lib/jenkins/build/heuler/pyhoca-gui/../ -maxdepth 0 -mindepth 0 -type f + grep -qs 'pyhoca-gui_*.orig.tar.gz' ++ gitrevno + GITREV=1408 + SA_OPTION= + test -f debian/source/format + grep -Eqs '^3.0.*$quilt$$' debian/source/format + '[' -n 4 ']' + '[' 4 -gt 3 ']' + typeset -l codename=buster + '[' buster = sid ']' + typeset numerical_version= + typeset pretty_dist= + typeset -i tmp_ret=1 ++ map_codename_to_numerical_version debian buster ++ typeset dist=debian ++ typeset codename_in=buster ++ '[' -n 4 ']' ++ '[' 4 -gt 3 ']' ++ typeset -l codename=buster ++ '[' buster = sid ']' ++ typeset numerical_version= ++ typeset -i ret=1 ++ '[' debian = debian ']' +++ debian-codename-to-version.sh buster ++ numerical_version=10 ++ ret=0 ++ echo 10 ++ return 0 + numerical_version=10 + tmp_ret=0 + '[' -n debian ']' + '[' debian = debian ']' + pretty_dist=Debian + '[' -n debian ']' + '[' debian = ubuntu ']' + '[' 0 -ne 0 ']' + '[' -z 10 ']' + '[' xheuler '!=' xmain ']' + mv -- debian/control debian/control.tmp + sed 's,Section:[\ ]*$.*$,Section: heuler/\1,g' debian/control.tmp + '[' heuler '!=' heuler ']' + dch --distribution buster --force-distribution -l '~git20191202.1408+10.heuler.' 'Development-Snapshot!!! Auto-built Debian buster (10) package for packages.x2go.org repository (Git commit: da3d33a0e8a3cb70650454f629a13c9dd52f66b4).' + typeset -i skip_arch_all=0 + typeset -a arches + arches=() + case "${PLATFORM}" in + arches+=("amd64" "i386") + '[' debian = raspbian ']' + typeset cur_arch= + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/pyhoca-gui/debian/buster/amd64 + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/pyhoca-gui/debian/buster/i386 + OTHERMIRROR= + '[' xheuler = xheuler ']' + grep -qs pyhoca-gui + OTHERMIRROR='deb http://packages.x2go.org/debian buster main heuler' + '[' pyhoca-gui = x2gomatebindings ']' + git --no-pager log --since '2 years ago' '--format=%ai %aN (%h) %n%n%x09*%w(68,0,10) %s%d%n' + typeset -a sbuild_options + sbuild_options=("-n" "--jobs=2" "-sA" "--dist=${codename}" "--keyid=${GPG_KEY}") + '[' 10 -gt 8 ']' + sbuild_options+=("--build-dep-resolver=apt") + sbuild_options+=("--resolve-alternatives") + '[' -n '' ']' + '[' -n 'deb http://packages.x2go.org/debian buster main heuler' ']' + sbuild_options+=("--extra-repository=${OTHERMIRROR}") + typeset -a sbuild_options_amd64 sbuild_options_i386 sbuild_options_armhf sbuild_options_powerpc sbuild_options_ppc64 sbuild_options_ppc64el + sbuild_options_amd64=("${sbuild_options[@]}") + sbuild_options_i386=("${sbuild_options[@]}" "--arch=i386" "--debbuildopts=-B") + sbuild_options_armhf=("${sbuild_options[@]}" "--arch=armhf" "--chroot=${codename}-armhf-raspbian-sbuild") + sbuild_options_powerpc=("${sbuild_options[@]}" "--debbuildopts=-B") + sbuild_options_ppc64=("${sbuild_options[@]}" "--arch=ppc64" "--chroot=${codename}-ppc64-sbuild" "--debbuildopts=-B") + sbuild_options_ppc64el=("${sbuild_options[@]}" "--debbuildopts=-B") + typeset base_arch=amd64 + '[' -n amd64 ']' + '[' x '!=' xamd64 ']' + grep -Eqs 'Architecture.*(all|any|amd64)' /var/lib/jenkins/tmp/tmp.xen04rC3NQC7dOsdUGwZxhgJ/pyhoca-gui/debian/control + typeset -i has_arch_dep=0 + grep -Eqs 'Architecture.*(any|amd64)' /var/lib/jenkins/tmp/tmp.xen04rC3NQC7dOsdUGwZxhgJ/pyhoca-gui/debian/control + '[' 0 -eq 1 ']' + '[' 0 -eq 0 ']' + typeset 'indirect=sbuild_options_amd64[@]' + typeset -a indirect_resolve + indirect_resolve=("${!indirect}") + cd /var/lib/jenkins/pkg-dist/heuler/pyhoca-gui/debian/buster/amd64 + nice sbuild -n --jobs=2 -sA --dist=buster --keyid=F4A7678C9C6B0B2B --build-dep-resolver=apt --resolve-alternatives '--extra-repository=deb http://packages.x2go.org/debian buster main heuler' /var/lib/jenkins/tmp/tmp.xen04rC3NQC7dOsdUGwZxhgJ/pyhoca-gui dh clean --with python2 dh: Compatibility levels before 9 are deprecated (level 7 in use) dh_testdir debian/rules override_dh_auto_clean make[1]: Entering directory '/home/_jenkins_/tmp/tmp.xen04rC3NQC7dOsdUGwZxhgJ/pyhoca-gui' test -f po/PyHoca-GUI.pot.bak && mv po/PyHoca-GUI.pot.bak po/PyHoca-GUI.pot || true rm -Rf PyHoca_GUI.egg-info/ dh_auto_clean dh_auto_clean: Compatibility levels before 9 are deprecated (level 7 in use) python setup.py clean -a File "setup.py", line 29 from __future__ import print_function SyntaxError: from __future__ imports must occur at the beginning of the file dh_auto_clean: python setup.py clean -a returned exit code 1 debian/rules:16: recipe for target 'override_dh_auto_clean' failed make[1]: *** [override_dh_auto_clean] Error 1 make[1]: Leaving directory '/home/_jenkins_/tmp/tmp.xen04rC3NQC7dOsdUGwZxhgJ/pyhoca-gui' debian/rules:9: recipe for target 'clean' failed make: *** [clean] Error 2 E: Failed to clean source directory /home/_jenkins_/tmp/tmp.xen04rC3NQC7dOsdUGwZxhgJ/pyhoca-gui (/home/_jenkins_/tmp/tmp.xen04rC3NQC7dOsdUGwZxhgJ/pyhoca-gui_0.6.0.0-0x2go1~git20191202.1408+10.heuler.1.dsc) + cleanup + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n '' ']' + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.xen04rC3NQC7dOsdUGwZxhgJ ']' + '[' -d /var/lib/jenkins/tmp/tmp.xen04rC3NQC7dOsdUGwZxhgJ ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.xen04rC3NQC7dOsdUGwZxhgJ Build step 'Execute shell' marked build as failure

1 4

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

x2go-commits December 2019