x2go-commits June 2018

x2go-commits@lists.x2go.org

3 participants
168 discussions

[nx-libs] branch 3.6.x updated (942ae19 -> 72f11ee)
by git-admin＠x2go.org 16 Jun '18

16 Jun '18

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch 3.6.x in repository nx-libs. from 942ae19 debian/rules: more Jessie unbreaking, also for dh_auto_{build,install}. new da51a36 nx-libs.spec: disable parallel builds, was pure luck that it worked before. new 72f11ee nx-X11/Makefile: pass down $(MFLAGS) to imake call, because... we probably want that. Likely. The 2 revisions listed above as "new" are entirely new to this repository and will be described in separate emails. The revisions listed as "adds" were already present in the repository and have only been added to this reference. Summary of changes: nx-X11/Makefile | 2 +- nx-libs.spec | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/nx-libs.git

1 2

Build failed in Jenkins: nx-libs+ppc64le+nightly+epel-7 #74
by jenkins＠x2go.org 16 Jun '18

16 Jun '18

See <http://jenkins.x2go.org:8080/job/nx-libs+ppc64le+nightly+epel-7/74/display/…> Changes: [mike.gabriel] Makefile: Don't do a parallel clean-up of nx-X11. We have seen failures [mike.gabriel] Makefile targets: Rewriting and consolidating the target structure for [mike.gabriel] debian/rules: Avoid dh_auto_build. It adds -Oline since 11.2 which let's [mike.gabriel] debian/rules: Drop override_dh_clean. Makefile (et al.) removal in [mike.gabriel] debian/rules: Typo fix (NUMJOBS, not NUM_JOBS). [mike.gabriel] Makefile: Enforce -j1 for BuildDependsOnly target. [mike.gabriel] Revert "debian/rules: Typo fix (NUMJOBS, not NUM_JOBS)." [mike.gabriel] Revert "debian/rules: Avoid dh_auto_build. It adds -Oline since 11.2 [mike.gabriel] Makefile: Run BuildIncludes and clean target in nx-X11/ with -j1. [mike.gabriel] debian/rules: Run dh_auto_clean with --no-parallel. [ionic] nx-libs.spec: we never used gpg-offline, drop it. [mike.gabriel] nxcomp: fix spelling errors as reported by codespell [mike.gabriel] nxcompshad: fix spelling errors as reported by codespell [mike.gabriel] hw/nxagent: fix spelling errors as reported by codespell [mike.gabriel] manpage: fix spelling error as reported by codespell [mike.gabriel] compext: fix spelling errors as reported by codespell [mike.gabriel] nxproxy: fix spelling errors as reported by codespell [mike.gabriel] config/cf: fix spelling errors as reported by codespell [mike.gabriel] debian/rules: Highly enforce --no-parallel mode while Xserver is still [mike.gabriel] debian/rules: Typo fix in dh_auto_build --no-parallel option. [mike.gabriel] Screen.c: replace XSetWMNormalHints code block by already existing [mike.gabriel] Screen.c/Events.c: add some FIXMEs [mike.gabriel] nxagent: use XAllocSizeHints() instead of XSizeHints struct [mike.gabriel] Screen.c/Events.c: fix some comments [mike.gabriel] nxagent: remove mmwidth/mmheight from nxagentChangeScreenConfig [mike.gabriel] Events.c: catch intermediate window position changes [mike.gabriel] Screen.c: simplify setting of window name/class [mike.gabriel] whitespace fixes [mike.gabriel] Update Xinerama on XMapEvent [uli42] Clipboard.c: add missing include ------------------------------------------ [...truncated 1.44 MB...] + ln -s ../../../programs/Xserver/../../../nxcomp/include/NXproto.h . + for i in ../../../nxcomp/include/MD5.h ../../../nxcomp/include/NXalert.h ../../../nxcomp/include/NX.h ../../../nxcomp/include/NXpack.h ../../../nxcomp/include/NXproto.h ../../../nxcomp/include/NXvars.h ../../../nxcompshad/include/Shadow.h ++ basename ../../../nxcomp/include/NXvars.h + rm -f NXvars.h + ln -s ../../../programs/Xserver/../../../nxcomp/include/NXvars.h . + for i in ../../../nxcomp/include/MD5.h ../../../nxcomp/include/NXalert.h ../../../nxcomp/include/NX.h ../../../nxcomp/include/NXpack.h ../../../nxcomp/include/NXproto.h ../../../nxcomp/include/NXvars.h ../../../nxcompshad/include/Shadow.h ++ basename ../../../nxcompshad/include/Shadow.h + rm -f Shadow.h + ln -s ../../../programs/Xserver/../../../nxcompshad/include/Shadow.h . including in programs/Xserver/include... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/include' + cd ../../../exports/include/nx-X11 + for i in os.h misc.h ++ basename os.h + rm -f os.h + ln -s ../../../programs/Xserver/include/os.h . + for i in os.h misc.h ++ basename misc.h + rm -f misc.h + ln -s ../../../programs/Xserver/include/misc.h . make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/include' including in programs/Xserver/dix... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/dix' make[6]: Nothing to be done for `includes'. make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/dix' including in programs/Xserver/os... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/os' make[6]: Nothing to be done for `includes'. make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/os' including in programs/Xserver/mi... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/mi' make[6]: Nothing to be done for `includes'. make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/mi' including in programs/Xserver/Xext... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/Xext' make[6]: Nothing to be done for `includes'. make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/Xext' including in programs/Xserver/xkb... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/xkb' make[6]: Nothing to be done for `includes'. make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/xkb' including in programs/Xserver/Xi... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/Xi' make[6]: Nothing to be done for `includes'. make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/Xi' including in programs/Xserver/GL... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL' including in programs/Xserver/GL/glx... make[7]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/glx' make[7]: Nothing to be done for `includes'. make[7]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/glx' including in programs/Xserver/GL/mesa... make[7]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa' including in programs/Xserver/GL/mesa/main... make[8]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/main' make[8]: Nothing to be done for `includes'. make[8]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/main' including in programs/Xserver/GL/mesa/math... make[8]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/math' make[8]: *** No rule to make target `includes'. Stop. make[8]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/math' make[7]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa' make[8]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/math' depending in programs/Xserver/GL/mesa/array_cache... make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL' make[5]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver' make[4]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs' make[7]: *** [includes] Error 2 make[6]: *** [includes] Error 2 make[5]: *** [includes] Error 2 make[4]: *** [includes] Error 2 make[3]: *** [includes] Error 2 make[3]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11' make[2]: *** [includes] Error 2 make[2]: *** Waiting for unfinished jobs.... echo "using system-wide depend, continuing in programs/Xserver/GL/mesa" make[8]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/array_cache' echo "using system-wide depend, continuing in programs/Xserver/GL/mesa/array_cache" using system-wide depend, continuing in programs/Xserver/GL/mesa using system-wide depend, continuing in programs/Xserver/GL/mesa/array_cache gccmakedep -- -I../../../../../extras/Mesa/src/mesa -I../../../../../extras/Mesa/src/mesa/array_cache -I../../../../../extras/Mesa/src/mesa/math -I../../../../../extras/Mesa/src/mesa/main -I../../../../../extras/Mesa/src/mesa/glapi -I../../../../../extras/Mesa/include -I../../../../../programs/Xserver/include -I../../../../../exports/include/nx-X11 -I../../../../../programs/Xserver/GL/include -I../../../../../programs/Xserver/GL/glx -I../../../../../lib/GL/include -I../../../../../programs/Xserver/hw/xfree86 -I../../../../../exports/include -I../../../../.. -I../../../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DGLXEXT -DGLX_USE_MESA -DUSE_MAKEDEPEND -- ac_context.c ac_import.c make[8]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/array_cache' depending in programs/Xserver/GL/mesa/swrast... make[8]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/swrast' echo "using system-wide depend, continuing in programs/Xserver/GL/mesa/swrast" using system-wide depend, continuing in programs/Xserver/GL/mesa/swrast gccmakedep -- -I../../../../../extras/Mesa/src/mesa -I../../../../../extras/Mesa/src/mesa/main -I../../../../../extras/Mesa/src/mesa/glapi -I../../../../../extras/Mesa/src/mesa/swrast -I../../../../../extras/Mesa/src/mesa/swrast_setup -I../../../../../extras/Mesa/src/mesa/shader -I../../../../../extras/Mesa/include -I../../../../../programs/Xserver/include -I../../../../../exports/include/nx-X11 -I../../../../../programs/Xserver/GL/include -I../../../../../programs/Xserver/GL/glx -I../../../../../lib/GL/include -I../../../../../programs/Xserver/hw/xfree86 -I../../../../../exports/include -I../../../../.. -I../../../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DGLXEXT -DGLX_USE_MESA -DUSE_MAKEDEPEND -- s_aaline.c s_aatriangle.c s_accum.c s_alpha.c s_atifragshader.c s_bitmap.c s_blend.c s_buffers.c s_context.c s_copypix.c s_depth.c s_drawpix.c s_feedback.c s_fog.c s_imaging.c s_lines.c s_logic.c s_masking.c s_nvfragprog.c s_pixeltex.c s_points.c s_readpix.c s_span.c s_stencil.c s_texstore.c s_texture.c s_triangle.c s_zoom.c make[8]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/swrast' depending in programs/Xserver/GL/mesa/swrast_setup... make[8]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/swrast_setup' echo "using system-wide depend, continuing in programs/Xserver/GL/mesa/swrast_setup" using system-wide depend, continuing in programs/Xserver/GL/mesa/swrast_setup gccmakedep -- -I../../../../../extras/Mesa/src/mesa -I../../../../../extras/Mesa/src/mesa/main -I../../../../../extras/Mesa/src/mesa/glapi -I../../../../../extras/Mesa/src/mesa/swrast_setup -I../../../../../extras/Mesa/include -I../../../../../programs/Xserver/include -I../../../../../exports/include/nx-X11 -I../../../../../programs/Xserver/GL/include -I../../../../../programs/Xserver/GL/glx -I../../../../../lib/GL/include -I../../../../../programs/Xserver/hw/xfree86 -I../../../../../exports/include -I../../../../.. -I../../../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DGLXEXT -DGLX_USE_MESA -DUSE_MAKEDEPEND -- ss_context.c ss_triangle.c make[8]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/swrast_setup' depending in programs/Xserver/GL/mesa/tnl... make[8]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/tnl' echo "using system-wide depend, continuing in programs/Xserver/GL/mesa/tnl" using system-wide depend, continuing in programs/Xserver/GL/mesa/tnl gccmakedep -- -I../../../../../extras/Mesa/src/mesa -I../../../../../extras/Mesa/src/mesa/array_cache -I../../../../../extras/Mesa/src/mesa/math -I../../../../../extras/Mesa/src/mesa/main -I../../../../../extras/Mesa/src/mesa/glapi -I../../../../../extras/Mesa/src/mesa/shader -I../../../../../extras/Mesa/src/mesa/tnl -I../../../../../extras/Mesa/include -I../../../../../programs/Xserver/include -I../../../../../exports/include/nx-X11 -I../../../../../programs/Xserver/GL/include -I../../../../../programs/Xserver/GL/glx -I../../../../../lib/GL/include -I../../../../../programs/Xserver/hw/xfree86 -I../../../../../exports/include -I../../../../.. -I../../../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DGLXEXT -DGLX_USE_MESA -DUSE_MAKEDEPEND -- t_array_api.c t_array_import.c t_context.c t_pipeline.c t_save_api.c t_save_loopback.c t_save_playback.c t_vb_arbprogram.c t_vb_arbprogram_sse.c t_vb_fog.c t_vb_cull.c t_vb_light.c t_vb_normals.c t_vb_points.c t_vb_program.c t_vb_render.c t_vb_texgen.c t_vb_texmat.c t_vb_vertex.c t_vertex.c t_vertex_generic.c t_vertex_sse.c t_vp_build.c t_vtx_api.c t_vtx_eval.c t_vtx_exec.c t_vtx_generic.c make[8]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/tnl' depending in programs/Xserver/GL/mesa/shader... make[8]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/shader' echo "using system-wide depend, continuing in programs/Xserver/GL/mesa/shader" using system-wide depend, continuing in programs/Xserver/GL/mesa/shader gccmakedep -- -I../../../../../extras/Mesa/src/mesa -I../../../../../extras/Mesa/src/mesa/shader -I../../../../../extras/Mesa/src/mesa/shader/grammar -I../../../../../extras/Mesa/src/mesa/shader/slang -I../../../../../extras/Mesa/src/mesa/main -I../../../../../extras/Mesa/src/mesa/glapi -I../../../../../extras/Mesa/include -I../../../../../programs/Xserver/include -I../../../../../exports/include/nx-X11 -I../../../../../programs/Xserver/GL/include -I../../../../../programs/Xserver/GL/glx -I../../../../../lib/GL/include -I../../../../../programs/Xserver/hw/xfree86 -I../../../../../exports/include -I../../../../.. -I../../../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DGLXEXT -DGLX_USE_MESA -DUSE_MAKEDEPEND -- arbprogparse.c arbprogram.c arbfragparse.c arbvertparse.c atifragshader.c nvprogram.c nvfragparse.c nvvertexec.c nvvertparse.c program.c shaderobjects.c shaderobjects_3dlabs.c depending in programs/Xserver/GL/mesa/shader/grammar... make[9]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/shader/grammar' echo "using system-wide depend, continuing in programs/Xserver/GL/mesa/shader/grammar" using system-wide depend, continuing in programs/Xserver/GL/mesa/shader/grammar gccmakedep -- -I../../../../../../extras/Mesa/src/mesa -I../../../../../../extras/Mesa/src/mesa/shader -I../../../../../../extras/Mesa/src/mesa/shader/grammar -I../../../../../../extras/Mesa/src/mesa/main -I../../../../../../extras/Mesa/src/mesa/glapi -I../../../../../../extras/Mesa/include -I../../../../../../programs/Xserver/include -I../../../../../../exports/include/nx-X11 -I../../../../../../programs/Xserver/GL/include -I../../../../../../programs/Xserver/GL/glx -I../../../../../../lib/GL/include -I../../../../../../programs/Xserver/hw/xfree86 -I../../../../../../exports/include -I../../../../../.. -I../../../../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DGLXEXT -DGLX_USE_MESA -DUSE_MAKEDEPEND -- grammar_mesa.c make[9]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/shader/grammar' depending in programs/Xserver/GL/mesa/shader/slang... make[9]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/shader/slang' echo "using system-wide depend, continuing in programs/Xserver/GL/mesa/shader/slang" using system-wide depend, continuing in programs/Xserver/GL/mesa/shader/slang gccmakedep -- -I../../../../../../extras/Mesa/src/mesa -I../../../../../../extras/Mesa/src/mesa/shader -I../../../../../../extras/Mesa/src/mesa/shader/grammar -I../../../../../../extras/Mesa/src/mesa/main -I../../../../../../extras/Mesa/src/mesa/glapi -I../../../../../../extras/Mesa/include -I../../../../../../programs/Xserver/include -I../../../../../../exports/include/nx-X11 -I../../../../../../programs/Xserver/GL/include -I../../../../../../programs/Xserver/GL/glx -I../../../../../../lib/GL/include -I../../../../../../programs/Xserver/hw/xfree86 -I../../../../../../exports/include -I../../../../../.. -I../../../../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DGLXEXT -DGLX_USE_MESA -DUSE_MAKEDEPEND -- slang_assemble_assignment.c slang_assemble.c slang_assemble_conditional.c slang_assemble_constructor.c slang_assemble_typeinfo.c slang_compile.c slang_execute.c slang_preprocess.c slang_storage.c slang_utility.c depending in programs/Xserver/GL/mesa/shader/slang/library... make[10]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/shader/slang/library' echo "using system-wide depend, continuing in programs/Xserver/GL/mesa/shader/slang/library" using system-wide depend, continuing in programs/Xserver/GL/mesa/shader/slang/library gccmakedep -- -I../../../../../../../extras/Mesa/src/mesa -I../../../../../../../extras/Mesa/src/mesa/shader -I../../../../../../../extras/Mesa/src/mesa/shader/grammar -I../../../../../../../extras/Mesa/src/mesa/main -I../../../../../../../extras/Mesa/src/mesa/glapi -I../../../../../../../extras/Mesa/include -I../../../../../../../programs/Xserver/include -I../../../../../../../exports/include/nx-X11 -I../../../../../../../programs/Xserver/GL/include -I../../../../../../../programs/Xserver/GL/glx -I../../../../../../../lib/GL/include -I../../../../../../../programs/Xserver/hw/xfree86 -I../../../../../../../exports/include -I../../../../../../.. -I../../../../../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DGLXEXT -DGLX_USE_MESA -DUSE_MAKEDEPEND -- make[10]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/shader/slang/library' make[9]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/shader/slang' make[8]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/shader' depending in programs/Xserver/GL/mesa/X... make[8]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/X' echo "using system-wide depend, continuing in programs/Xserver/GL/mesa/X" using system-wide depend, continuing in programs/Xserver/GL/mesa/X gccmakedep -- -I../../../../../programs/Xserver/GL/mesa/X -I../../../../../exports/include/nx-X11 -I../../../../../include/extensions -I../../../../../extras/Mesa/src/mesa -I../../../../../extras/Mesa/src/mesa/main -I../../../../../extras/Mesa/src/mesa/glapi -I../../../../../extras/Mesa/src/mesa/shader -I../../../../../extras/Mesa/src -I../../../../../extras/Mesa/src/mesa/drivers/x11 -I../../../../../extras/Mesa/include -I../../../../../lib/GL/glx -I../../../../../lib/GL/include -I../../../../../programs/Xserver/include -I../../../../../programs/Xserver/GL/include -I../../../../../programs/Xserver/GL/glx -I../../../../../programs/Xserver/hw/xfree86/os-support -I../../../../../extras/drm/shared-core `pkg-config --cflags-only-I pixman-1` -I../../../../.. -I../../../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DGLXEXT -DGLX_USE_MESA -DNXAGENT_SERVER -DUSE_MAKEDEPEND -- xm_api.c xm_buffer.c xm_dd.c xm_line.c xm_span.c xm_tri.c xf86glx.c xf86glx_util.c compsize.c driverfuncs.c make[8]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/X' depending in programs/Xserver/GL/mesa/GLcore... make[8]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/GLcore' make[8]: Nothing to be done for `depend'. make[8]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa/GLcore' gccmakedep -- -I../../../../exports/include -I../../../../exports/include/nx-X11 -I../../../../include/extensions -I../../../../extras/Mesa/include -I/include -I../../../../extras/Mesa/src/mesa -I../../../../programs/Xserver/include -I../../../.. -I../../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DGLXEXT -DGLX_USE_MESA -DUSE_MAKEDEPEND -- make[7]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL/mesa' make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/GL' depending in programs/Xserver/dbe... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/dbe' echo "using system-wide depend, continuing in programs/Xserver/dbe" using system-wide depend, continuing in programs/Xserver/dbe gccmakedep -- -I../../../programs/Xserver/include -I../../../exports/include/nx-X11 -I../../../include/extensions `pkg-config --cflags-only-I pixman-1` -I../../.. -I../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DNXAGENT_SERVER -DUSE_MAKEDEPEND -- dbe.c midbe.c make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/dbe' depending in programs/Xserver/record... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/record' echo "using system-wide depend, continuing in programs/Xserver/record" using system-wide depend, continuing in programs/Xserver/record gccmakedep -- -I../include -I../../../exports/include/nx-X11 -I../../../include/extensions -I../../../programs/Xserver/Xext `pkg-config --cflags-only-I pixman-1` -I../../.. -I../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DNDEBUG -DNXAGENT_SERVER -DUSE_MAKEDEPEND -- record.c set.c make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/record' depending in programs/Xserver/randr... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/randr' echo "using system-wide depend, continuing in programs/Xserver/randr" using system-wide depend, continuing in programs/Xserver/randr gccmakedep -- -I../include -I../mi -I../fb -I../hw/kdrive -I../../../include/extensions -I../../../exports/include/nx-X11 -I../render `pkg-config --cflags-only-I pixman-1` -I../../.. -I../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DXINERAMA -DPANORAMIX -DNXAGENT_SERVER -DUSE_MAKEDEPEND -- randr.c rrcrtc.c rrdispatch.c rrinfo.c rrmode.c rrmonitor.c rroutput.c rrpointer.c rrproperty.c rrprovider.c rrproviderproperty.c rrscreen.c rrsdispatch.c rrtransform.c rrxinerama.c make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/randr' depending in programs/Xserver/render... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/render' echo "using system-wide depend, continuing in programs/Xserver/render" using system-wide depend, continuing in programs/Xserver/render gccmakedep -- -I. -I../include -I../mi -I../fb -I../hw/kdrive -I../../../include/extensions -I../../../exports/include/nx-X11 -I../Xext `pkg-config --cflags-only-I pixman-1` -I../../.. -I../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DNXAGENT_SERVER -DUSE_MAKEDEPEND -- animcur.c filter.c glyph.c matrix.c miindex.c mipict.c mirect.c mitri.c renderedge.c make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/render' depending in programs/Xserver/xfixes... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/xfixes' echo "using system-wide depend, continuing in programs/Xserver/xfixes" using system-wide depend, continuing in programs/Xserver/xfixes gccmakedep -- -I. -I../include -I../Xext -I../fixes -I../render -I../../../include/extensions -I../../../exports/include/nx-X11 `pkg-config --cflags-only-I pixman-1` -I../../.. -I../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DNXAGENT_SERVER -DUSE_MAKEDEPEND -- cursor.c region.c saveset.c select.c xfixes.c make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/xfixes' depending in programs/Xserver/damageext... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/damageext' echo "using system-wide depend, continuing in programs/Xserver/damageext" using system-wide depend, continuing in programs/Xserver/damageext gccmakedep -- -I../include -I../Xext -I../render -I../xfixes -I../miext/damage -I../../../include/extensions -I../../../exports/include/nx-X11 `pkg-config --cflags-only-I pixman-1` -I../../.. -I../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DNXAGENT_SERVER -DUSE_MAKEDEPEND -- damageext.c make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/damageext' depending in programs/Xserver/miext/cw... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/miext/cw' echo "using system-wide depend, continuing in programs/Xserver/miext/cw" using system-wide depend, continuing in programs/Xserver/miext/cw gccmakedep -- -I../../mi -I../../fb -I../../render -I../../composite -I../../include -I../../../../exports/include/nx-X11 -I../../../../include/extensions `pkg-config --cflags-only-I pixman-1` -I../../../.. -I../../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DUSE_MAKEDEPEND -- cw.c cw_ops.c cw_render.c make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/miext/cw' depending in programs/Xserver/composite... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/composite' echo "using system-wide depend, continuing in programs/Xserver/composite" using system-wide depend, continuing in programs/Xserver/composite gccmakedep -- -I../include -I../mi -I../Xext -I../render -I../xfixes -I../damageext -I../miext/damage -I../../../include/extensions -I../../../exports/include/nx-X11 `pkg-config --cflags-only-I pixman-1` -I../../.. -I../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DNXAGENT_SERVER -DUSE_MAKEDEPEND -- compalloc.c compext.c compinit.c compoverlay.c compwindow.c make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/composite' depending in programs/Xserver/hw/nxagent... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/hw/nxagent' echo "using system-wide depend, continuing in programs/Xserver/hw/nxagent" using system-wide depend, continuing in programs/Xserver/hw/nxagent gccmakedep -- -I. -I../../../../extras/Mesa/include -I../../../../exports/include/X11 -I../../mi -I../../include -I../../os -I../../miext/damage -I../../miext/cw -I../../GL/glx -I../../GL/include -I../../../../lib/GL/include -I../../Xext -I../../../../lib/include/X11 -I../../../../include/extensions -I../../../../exports/include/nx-X11 -I../../fb -I../../mfb -I../../render `pkg-config --cflags-only-I libxml-2.0` `pkg-config --cflags-only-I pixman-1` -I../../../.. -I../../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -g -DDDXOSINIT -DSERVER_LOCK -DDDXOSFATALERROR -DDDXOSVERRORF -DDDXTIME -DPART_NET -DDBE -DXTEST -DXSYNC -DXCMISC -DXRECORD -DMITSHM -DBIGREQS -DDPMSExtension -DSCREENSAVER -DXV -DXVMC -DGLXEXT -DGLX_USE_MESA -DRES -DNX_VERSION_CURRENT="(((3) * 10000000) + ((5) * 100000) + ((99) * 1000) + 16)" -DNX_VERSION_CURRENT_STRING="\"`echo 3 5 99 16 | sed 's/ /./g'`\"" -UXF86VIDMODE -UXFreeXDGA -UXF86MISC -UXF86DRI -DNXAGENT_SERVER -DNXAGENT_CONSTRAINCURSOR -DNXAGENT_FONTCACHE_SIZE=50 -DNXAGENT_GLYPHCACHE -DNXAGENT_GLYPHCACHE_SIZE=50 -DNXAGENT_RENDER_CLEANUP -DNXAGENT_SHAPE2 -DNXAGENT_FIXKEYS -DNXAGENT_CLIPBOARD -DNXAGENT_EXPOSURES -DNXAGENT_FONTEXCLUDE -DNXAGENT_PACKEDIMAGES -DNXAGENT_VISIBILITY -DNXAGENT_WAKEUP=1000 -DNXAGENT_ONSTART -DNXAGENT_SPLASH -DNXAGENT_ARTSD -DNXAGENT_RANDR_MODE_PREFIX -UNX_DEBUG_INPUT -DRANDR_10_INTERFACE=1 -DRANDR_12_INTERFACE=1 -DRANDR_13_INTERFACE=1 -DRANDR_14_INTERFACE=1 -DRANDR_15_INTERFACE=1 -DPANORAMIX -UDEBUG_TREE -DUSE_MAKEDEPEND -- NXwindow.c NXevents.c NXproperty.c NXdixfonts.c NXglyphcurs.c NXdispatch.c NXrender.c NXglyph.c NXpicture.c NXextension.c NXshm.c NXglxext.c NXxvdisp.c NXmiexpose.c NXresource.c NXdamage.c NXmitrap.c Args.c Binder.c BitmapUtils.c Colormap.c Cursor.c Dialog.c Display.c Events.c Font.c GC.c GCOps.c Millis.c Handlers.c Init.c Keyboard.c Keystroke.c Pointer.c Screen.c TestExt.c Visual.c Drawable.c Window.c Pixmap.c Render.c Client.c Rootless.c Extensions.c Options.c Clipboard.c Splash.c Split.c Holder.c Reconnect.c Error.c Atoms.c Trap.c Image.c Composite.c Pixels.c stubs.c xpstubs.c miinitext.c depending in programs/Xserver/hw/nxagent/compext... make[7]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/hw/nxagent/compext' echo "using system-wide depend, continuing in programs/Xserver/hw/nxagent/compext" using system-wide depend, continuing in programs/Xserver/hw/nxagent/compext gccmakedep -- -I../../../../../programs/Xserver/include -I../../../../../exports/include/X11 -I../../../../../lib/include/X11 `pkg-config --cflags-only-I pixman-1` $(pkg-config --exists 'zlib' >/dev/null 2>&1 && pkg-config --cflags-only-I 'zlib') `pkg-config --cflags-only-I libpng` -I../../../../.. -I../../../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DUSE_MAKEDEPEND -- Alpha.c Bitmap.c Clean.c Colormap.c Compext.c Jpeg.c Mask.c Png.c Rgb.c Rle.c Z.c make[7]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/hw/nxagent/compext' make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/hw/nxagent' depending in programs/Xserver/fb... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/fb' echo "using system-wide depend, continuing in programs/Xserver/fb" using system-wide depend, continuing in programs/Xserver/fb gccmakedep -- -I../../../programs/Xserver/fb -I../../../programs/Xserver/mi -I../../../programs/Xserver/include -I../../../exports/include/nx-X11 -I../../../programs/Xserver/hw/xfree86/common -I../../../programs/Xserver/render -I../../../include/extensions -I../../../programs/Xserver/Xext `pkg-config --cflags-only-I pixman-1` -I../../.. -I../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DNXAGENT_SERVER -DUSE_MAKEDEPEND -- fballpriv.c fbbits.c fbblt.c fbbltone.c fbbstore.c fbcmap.c fbcompose.c fbcopy.c fbedge.c fbfill.c fbfillrect.c fbfillsp.c fbgc.c fbgetsp.c fbglyph.c fbimage.c fbline.c fboverlay.c fbpixmap.c fbpoint.c fbpush.c fbscreen.c fbseg.c fbsetsp.c fbsolid.c fbstipple.c fbtile.c fbtrap.c fbutil.c fbwindow.c fb24_32.c fbpict.c make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/fb' depending in programs/Xserver/miext/damage... make[6]: Entering directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/miext/damage' echo "using system-wide depend, continuing in programs/Xserver/miext/damage" using system-wide depend, continuing in programs/Xserver/miext/damage gccmakedep -- -I../../../.. -I../../../../exports/include -Dlinux -D__powerpc64__ -D__powerpc__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_DEFAULT_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DXCSECURITY -DXF86BIGFONT -DDPMSExtension -DRENDER -DRANDR -DPANORAMIX -DXFIXES -DDAMAGE -DCOMPOSITE -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXvExtension -DXFree86Server -DXvMCExtension -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG -DHAVE_SETITIMER=1 -DFUNCPROTO=15 -DNARROWPROTO -DUSE_MAKEDEPEND -- make[6]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver/miext/damage' make[5]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs/Xserver' make[4]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11/programs' make[3]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11' make[2]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16/nx-X11' make[1]: Leaving directory `/builddir/build/BUILD/nx-libs-3.5.99.16' make[1]: *** [build-full] Error 2 RPM build errors: make: *** [build] Error 2 error: Bad exit status from /var/tmp/rpm-tmp.xkUUD7 (%build) Bad exit status from /var/tmp/rpm-tmp.xkUUD7 (%build) Child return code was: 1 EXCEPTION: [Error()] Traceback (most recent call last): File "/usr/lib/python3/dist-packages/mockbuild/trace_decorator.py", line 89, in trace result = func(*args, **kw) File "/usr/lib/python3/dist-packages/mockbuild/util.py", line 569, in do raise exception.Error("Command failed. See logs for output.\n # %s" % (command,), child.returncode) mockbuild.exception.Error: Command failed. See logs for output. # bash --login -c /usr/bin/rpmbuild -bb --target ppc64le --nodeps /builddir/build/SPECS/nx-libs.spec + exit 1 + cleanup + '[' -n /home/x2go-jenkins/tmp/x2go-mock-nyXGH6tX5wr7hEhjbkuuUSKz ']' + '[' -e /home/x2go-jenkins/tmp/x2go-mock-nyXGH6tX5wr7hEhjbkuuUSKz ']' + case "${TMP_MOCK_CFG_DIR}" in + typeset file= + for file in "${TMP_MOCK_CFG_DIR}/"* + '[' '!' -f /home/x2go-jenkins/tmp/x2go-mock-nyXGH6tX5wr7hEhjbkuuUSKz/epel-7-ppc64le-x2go-nightly-full.Nv0rZwxHI5iG6YbWcqRvrsdW.cfg ']' + rm -- /home/x2go-jenkins/tmp/x2go-mock-nyXGH6tX5wr7hEhjbkuuUSKz/epel-7-ppc64le-x2go-nightly-full.Nv0rZwxHI5iG6YbWcqRvrsdW.cfg + for file in "${TMP_MOCK_CFG_DIR}/"* + '[' '!' -f /home/x2go-jenkins/tmp/x2go-mock-nyXGH6tX5wr7hEhjbkuuUSKz/epel-7-ppc64le-x2go-nightly-full.W4d7ILcmtp3iGep9jsbS2gid.cfg ']' + rm -- /home/x2go-jenkins/tmp/x2go-mock-nyXGH6tX5wr7hEhjbkuuUSKz/epel-7-ppc64le-x2go-nightly-full.W4d7ILcmtp3iGep9jsbS2gid.cfg + '[' -e /home/x2go-jenkins/tmp/x2go-mock-nyXGH6tX5wr7hEhjbkuuUSKz ']' + '[' -d /home/x2go-jenkins/tmp/x2go-mock-nyXGH6tX5wr7hEhjbkuuUSKz ']' + rmdir -- /home/x2go-jenkins/tmp/x2go-mock-nyXGH6tX5wr7hEhjbkuuUSKz + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n /home/x2go-jenkins/tmp/tmp.qcRFTbhXXtQgGZaGwnErQkK7 ']' + '[' -d /home/x2go-jenkins/tmp/tmp.qcRFTbhXXtQgGZaGwnErQkK7 ']' + rm -Rf -- /home/x2go-jenkins/tmp/tmp.qcRFTbhXXtQgGZaGwnErQkK7 Build step 'Execute shell' marked build as failure

1 2

[nx-libs] branch master updated (8f73bf7 -> 942ae19)
by git-admin＠x2go.org 16 Jun '18

16 Jun '18

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch master in repository nx-libs. from 8f73bf7 debian/rules: unbreak Jessie: dh_auto_clean doesn't gracefully discard unknown --no-parallel flag. adds 942ae19 debian/rules: more Jessie unbreaking, also for dh_auto_{build,install}. No new revisions were added by this update. Summary of changes: debian/rules | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/nx-libs.git

1 0

[nx-libs] branch 3.6.x updated (8f73bf7 -> 942ae19)
by git-admin＠x2go.org 16 Jun '18

16 Jun '18

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch 3.6.x in repository nx-libs. from 8f73bf7 debian/rules: unbreak Jessie: dh_auto_clean doesn't gracefully discard unknown --no-parallel flag. new 942ae19 debian/rules: more Jessie unbreaking, also for dh_auto_{build,install}. The 1 revisions listed above as "new" are entirely new to this repository and will be described in separate emails. The revisions listed as "adds" were already present in the repository and have only been added to this reference. Summary of changes: debian/rules | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/nx-libs.git

1 1

Build failed in Jenkins: nx-libs+nightly+raspbian-stretch #56
by jenkins＠x2go.org 16 Jun '18

16 Jun '18

See <http://jenkins.x2go.org:8080/job/nx-libs+nightly+raspbian-stretch/56/displa…> Changes: [mike.gabriel] Makefile: Don't do a parallel clean-up of nx-X11. We have seen failures [mike.gabriel] Makefile targets: Rewriting and consolidating the target structure for [mike.gabriel] debian/rules: Avoid dh_auto_build. It adds -Oline since 11.2 which let's [mike.gabriel] debian/rules: Drop override_dh_clean. Makefile (et al.) removal in [mike.gabriel] debian/rules: Typo fix (NUMJOBS, not NUM_JOBS). [mike.gabriel] Makefile: Enforce -j1 for BuildDependsOnly target. [mike.gabriel] Revert "debian/rules: Typo fix (NUMJOBS, not NUM_JOBS)." [mike.gabriel] Revert "debian/rules: Avoid dh_auto_build. It adds -Oline since 11.2 [mike.gabriel] Makefile: Run BuildIncludes and clean target in nx-X11/ with -j1. [mike.gabriel] debian/rules: Run dh_auto_clean with --no-parallel. [ionic] nx-libs.spec: we never used gpg-offline, drop it. [mike.gabriel] nxcomp: fix spelling errors as reported by codespell [mike.gabriel] nxcompshad: fix spelling errors as reported by codespell [mike.gabriel] hw/nxagent: fix spelling errors as reported by codespell [mike.gabriel] manpage: fix spelling error as reported by codespell [mike.gabriel] compext: fix spelling errors as reported by codespell [mike.gabriel] nxproxy: fix spelling errors as reported by codespell [mike.gabriel] config/cf: fix spelling errors as reported by codespell [mike.gabriel] debian/rules: Highly enforce --no-parallel mode while Xserver is still [mike.gabriel] debian/rules: Typo fix in dh_auto_build --no-parallel option. [mike.gabriel] Screen.c: replace XSetWMNormalHints code block by already existing [mike.gabriel] Screen.c/Events.c: add some FIXMEs [mike.gabriel] nxagent: use XAllocSizeHints() instead of XSizeHints struct [mike.gabriel] Screen.c/Events.c: fix some comments [mike.gabriel] nxagent: remove mmwidth/mmheight from nxagentChangeScreenConfig [mike.gabriel] Events.c: catch intermediate window position changes [mike.gabriel] Screen.c: simplify setting of window name/class [mike.gabriel] whitespace fixes [mike.gabriel] Update Xinerama on XMapEvent [uli42] Clipboard.c: add missing include ------------------------------------------ [...truncated 10.51 KB...] +++ ret=XXXXXX +++ i=6 +++ '[' 6 -lt 24 ']' ++++ printf X +++ ret=XXXXXXX +++ i=7 +++ '[' 7 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXX +++ i=8 +++ '[' 8 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXX +++ i=9 +++ '[' 9 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXX +++ i=10 +++ '[' 10 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXX +++ i=11 +++ '[' 11 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXX +++ i=12 +++ '[' 12 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXX +++ i=13 +++ '[' 13 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXX +++ i=14 +++ '[' 14 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXX +++ i=15 +++ '[' 15 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXX +++ i=16 +++ '[' 16 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXX +++ i=17 +++ '[' 17 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXX +++ i=18 +++ '[' 18 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXX +++ i=19 +++ '[' 19 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXX +++ i=20 +++ '[' 20 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXX +++ i=21 +++ '[' 21 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXX +++ i=22 +++ '[' 22 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXX +++ i=23 +++ '[' 23 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXXX +++ i=24 +++ '[' 24 -lt 24 ']' +++ printf XXXXXXXXXXXXXXXXXXXXXXXX +++ return 0 ++ mktemp -d --tmpdir=/var/lib/jenkins/tmp/ tmp.XXXXXXXXXXXXXXXXXXXXXXXX + TEMP_DIR=/var/lib/jenkins/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ + temp_cleanup+=("${TEMP_DIR}") + mkdir -p -- /var/lib/jenkins/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ/nx-libs + chmod 2770 -Rf -- /var/lib/jenkins/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ + cd /var/lib/jenkins/build/heuler/nx-libs + git clone --no-hardlinks --no-local /var/lib/jenkins/build/heuler/nx-libs /var/lib/jenkins/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ/nx-libs/ Cloning into '/var/lib/jenkins/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ/nx-libs'... + cd /var/lib/jenkins/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ/nx-libs + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + find /var/lib/jenkins/build/heuler/nx-libs/../ -maxdepth 0 -mindepth 0 -type f + grep -qs 'nx-libs_*.orig.tar.gz' ++ gitrevno + GITREV=3019 + SA_OPTION= + test -f debian/source/format + grep -Eqs '^3.0.*$quilt$$' debian/source/format + '[' -n 4 ']' + '[' 4 -gt 3 ']' + typeset -l codename=stretch + '[' stretch = sid ']' + typeset numerical_version= + typeset pretty_dist= + typeset -i tmp_ret=1 ++ map_codename_to_numerical_version raspbian stretch ++ typeset dist=raspbian ++ typeset codename_in=stretch ++ '[' -n 4 ']' ++ '[' 4 -gt 3 ']' ++ typeset -l codename=stretch ++ '[' stretch = sid ']' ++ typeset numerical_version= ++ typeset -i ret=1 ++ '[' raspbian = debian ']' ++ '[' raspbian = raspbian ']' +++ debian-codename-to-version.sh stretch ++ numerical_version=9 ++ ret=0 ++ echo 9 ++ return 0 + numerical_version=9 + tmp_ret=0 + '[' -n raspbian ']' + '[' raspbian = debian ']' + '[' raspbian = raspbian ']' + pretty_dist=Debian + '[' -n raspbian ']' + '[' raspbian = ubuntu ']' + '[' 0 -ne 0 ']' + '[' -z 9 ']' + '[' xheuler '!=' xmain ']' + mv -- debian/control debian/control.tmp + sed 's,Section:[\ ]*$.*$,Section: heuler/\1,g' debian/control.tmp + '[' heuler '!=' heuler ']' + dch --distribution stretch --force-distribution -l '~git20180616.3019+9.heuler.' 'Development-Snapshot!!! Auto-built Debian stretch (9) package for packages.x2go.org repository (Git commit: 742957393627b6556d6f27aaff29c17f23c9b0d2).' + typeset -i skip_arch_all=0 + typeset -a arches + arches=() + case "${PLATFORM}" in + arches+=("amd64" "i386") + '[' raspbian = raspbian ']' + arches=("armhf") + typeset cur_arch= + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/nx-libs/raspbian/stretch/armhf + OTHERMIRROR= + '[' xheuler = xheuler ']' + grep -qs nx-libs + OTHERMIRROR='deb http://packages.x2go.org/raspbian stretch main heuler' + '[' nx-libs = x2gomatebindings ']' + git --no-pager log --since '2 years ago' '--format=%ai %aN (%h) %n%n%x09*%w(68,0,10) %s%d%n' + typeset -a sbuild_options + sbuild_options=("-n" "--jobs=2" "-sA" "--dist=${codename}" "--keyid=${GPG_KEY}") + '[' 9 -gt 8 ']' + sbuild_options+=("--build-dep-resolver=apt") + sbuild_options+=("--resolve-alternatives") + '[' -n '' ']' + '[' -n 'deb http://packages.x2go.org/raspbian stretch main heuler' ']' + sbuild_options+=("--extra-repository=${OTHERMIRROR}") + typeset -a sbuild_options_amd64 sbuild_options_i386 sbuild_options_armhf sbuild_options_powerpc sbuild_options_ppc64 sbuild_options_ppc64el + sbuild_options_amd64=("${sbuild_options[@]}") + sbuild_options_i386=("${sbuild_options[@]}" "--arch=i386" "--debbuildopts=-B") + sbuild_options_armhf=("${sbuild_options[@]}" "--arch=armhf" "--chroot=${codename}-armhf-raspbian-sbuild") + sbuild_options_powerpc=("${sbuild_options[@]}" "--debbuildopts=-B") + sbuild_options_ppc64=("${sbuild_options[@]}" "--arch=ppc64" "--chroot=${codename}-ppc64-sbuild" "--debbuildopts=-B") + sbuild_options_ppc64el=("${sbuild_options[@]}" "--debbuildopts=-B") + typeset base_arch=armhf + '[' -n armhf ']' + '[' x '!=' xarmhf ']' + grep -Eqs 'Architecture.*(all|any|armhf)' /var/lib/jenkins/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ/nx-libs/debian/control + typeset -i has_arch_dep=0 + grep -Eqs 'Architecture.*(any|armhf)' /var/lib/jenkins/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ/nx-libs/debian/control + has_arch_dep=1 + '[' 1 -eq 1 ']' + typeset 'indirect=sbuild_options_armhf[@]' + typeset -a indirect_resolve + indirect_resolve=("${!indirect}") + cd /var/lib/jenkins/pkg-dist/heuler/nx-libs/raspbian/stretch/armhf + nice sbuild -n --jobs=2 -sA --dist=stretch --keyid=F4A7678C9C6B0B2B --build-dep-resolver=apt --resolve-alternatives '--extra-repository=deb http://packages.x2go.org/raspbian stretch main heuler' --arch=armhf --chroot=stretch-armhf-raspbian-sbuild /var/lib/jenkins/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ/nx-libs CONFIGURE="./configure --disable-silent-rules \ --prefix=/usr \ --libdir="/usr/lib/x86_64-linux-gnu" \ --includedir="/usr/include/x86_64-linux-gnu" \ --libexecdir=""/usr/lib/x86_64-linux-gnu"/nx/bin" \ --build=x86_64-linux-gnu \ --host=x86_64-linux-gnu" dh clean --no-parallel --with quilt dh_testdir debian/rules override_dh_auto_clean make[1]: Entering directory '/home/_jenkins_/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ/nx-libs' rm -Rf nx-X11/.build-exports dh_auto_clean --no-parallel make -j1 distclean make[2]: Entering directory '/home/_jenkins_/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ/nx-libs' if test -f nxcomp/Makefile; then make -C nxcomp clean; fi if test -f nxproxy/Makefile; then make -C nxproxy clean; fi if test -f nx-X11/lib/Makefile; then make -C nx-X11/lib clean; fi if test -f nxcompshad/Makefile; then make -C nxcompshad clean; fi if test -d nx-X11; then make clean-env; fi make[3]: Entering directory '/home/_jenkins_/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ/nx-libs' # prepare nx-X11/config/cf/nxversion.def sed \ -e 's/###NX_VERSION_MAJOR###/3/' \ -e 's/###NX_VERSION_MINOR###/5/' \ -e 's/###NX_VERSION_MICRO###/99/' \ -e 's/###NX_VERSION_PATCH###/16/' \ nx-X11/config/cf/nxversion.def.in \ > nx-X11/config/cf/nxversion.def for header in Xlib.h Xresource.h Xutil.h cursorfont.h Xlibint.h Xcms.h Xlocale.h XKBlib.h XlibConf.h Xregion.h ImUtil.h ; do \ rm -f nx-X11/exports/include/nx-X11/${header}; \ done for header in transport.c Xtrans.c Xtrans.h Xtransint.h Xtranslcl.c Xtranssock.c Xtransutil.c ; do \ rm -f nx-X11/exports/include/nx-X11/Xtrans/${header}; \ done [ -d exports/include/nx-X11/Xtrans ] && rmdir -p --ignore-fail-on-non-empty exports/include/nx-X11/Xtrans/ || : [ -d exports/include/nx-X11/ ] && rmdir -p --ignore-fail-on-non-empty exports/include/nx-X11/ || : make -j1 -C nx-X11 clean FONT_DEFINES=" " XEXT_EXTRA_DEFINES="" IMAKE_DEFINES="" make[4]: Entering directory '/home/_jenkins_/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ/nx-libs/nx-X11' if [ -f xmakefile ]; then \ set -x; \ rm -f xmakefile.bak; \ mv xmakefile xmakefile.bak; \ else \ exit 0; \ fi which imake 1>/dev/null && imake -I./config/cf -s xmakefile -DTOPDIR=. -DCURDIR=. Makefile:66: recipe for target 'xmakefile' failed make[4]: *** [xmakefile] Error 1 make[4]: Leaving directory '/home/_jenkins_/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ/nx-libs/nx-X11' Makefile:117: recipe for target 'clean-env' failed make[3]: *** [clean-env] Error 2 make[3]: Leaving directory '/home/_jenkins_/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ/nx-libs' Makefile:71: recipe for target 'clean' failed make[2]: *** [clean] Error 2 make[2]: Leaving directory '/home/_jenkins_/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ/nx-libs' dh_auto_clean: make -j1 distclean returned exit code 2 debian/rules:25: recipe for target 'override_dh_auto_clean' failed make[1]: *** [override_dh_auto_clean] Error 2 make[1]: Leaving directory '/home/_jenkins_/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ/nx-libs' debian/rules:16: recipe for target 'clean' failed make: *** [clean] Error 2 E: Failed to clean source directory /home/_jenkins_/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ/nx-libs (/home/_jenkins_/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ/nx-libs_3.5.99.16-1~git20180616.3019+9.heuler.1.dsc) + cleanup + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n '' ']' + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ ']' + '[' -d /var/lib/jenkins/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.BnTQlTP0n7OYq9KCFrQFtbzJ Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: nx-libs+nightly+debian-buster #56
by jenkins＠x2go.org 16 Jun '18

16 Jun '18

See <http://jenkins.x2go.org:8080/job/nx-libs+nightly+debian-buster/56/display/r…> Changes: [mike.gabriel] Makefile: Don't do a parallel clean-up of nx-X11. We have seen failures [mike.gabriel] Makefile targets: Rewriting and consolidating the target structure for [mike.gabriel] debian/rules: Avoid dh_auto_build. It adds -Oline since 11.2 which let's [mike.gabriel] debian/rules: Drop override_dh_clean. Makefile (et al.) removal in [mike.gabriel] debian/rules: Typo fix (NUMJOBS, not NUM_JOBS). [mike.gabriel] Makefile: Enforce -j1 for BuildDependsOnly target. [mike.gabriel] Revert "debian/rules: Typo fix (NUMJOBS, not NUM_JOBS)." [mike.gabriel] Revert "debian/rules: Avoid dh_auto_build. It adds -Oline since 11.2 [mike.gabriel] Makefile: Run BuildIncludes and clean target in nx-X11/ with -j1. [mike.gabriel] debian/rules: Run dh_auto_clean with --no-parallel. [ionic] nx-libs.spec: we never used gpg-offline, drop it. [mike.gabriel] nxcomp: fix spelling errors as reported by codespell [mike.gabriel] nxcompshad: fix spelling errors as reported by codespell [mike.gabriel] hw/nxagent: fix spelling errors as reported by codespell [mike.gabriel] manpage: fix spelling error as reported by codespell [mike.gabriel] compext: fix spelling errors as reported by codespell [mike.gabriel] nxproxy: fix spelling errors as reported by codespell [mike.gabriel] config/cf: fix spelling errors as reported by codespell [mike.gabriel] debian/rules: Highly enforce --no-parallel mode while Xserver is still [mike.gabriel] debian/rules: Typo fix in dh_auto_build --no-parallel option. [mike.gabriel] Screen.c: replace XSetWMNormalHints code block by already existing [mike.gabriel] Screen.c/Events.c: add some FIXMEs [mike.gabriel] nxagent: use XAllocSizeHints() instead of XSizeHints struct [mike.gabriel] Screen.c/Events.c: fix some comments [mike.gabriel] nxagent: remove mmwidth/mmheight from nxagentChangeScreenConfig [mike.gabriel] Events.c: catch intermediate window position changes [mike.gabriel] Screen.c: simplify setting of window name/class [mike.gabriel] whitespace fixes [mike.gabriel] Update Xinerama on XMapEvent [uli42] Clipboard.c: add missing include ------------------------------------------ [...truncated 13.97 KB...] ++++ printf X +++ ret=XXXXXX +++ i=6 +++ '[' 6 -lt 24 ']' ++++ printf X +++ ret=XXXXXXX +++ i=7 +++ '[' 7 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXX +++ i=8 +++ '[' 8 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXX +++ i=9 +++ '[' 9 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXX +++ i=10 +++ '[' 10 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXX +++ i=11 +++ '[' 11 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXX +++ i=12 +++ '[' 12 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXX +++ i=13 +++ '[' 13 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXX +++ i=14 +++ '[' 14 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXX +++ i=15 +++ '[' 15 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXX +++ i=16 +++ '[' 16 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXX +++ i=17 +++ '[' 17 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXX +++ i=18 +++ '[' 18 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXX +++ i=19 +++ '[' 19 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXX +++ i=20 +++ '[' 20 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXX +++ i=21 +++ '[' 21 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXX +++ i=22 +++ '[' 22 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXX +++ i=23 +++ '[' 23 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXXX +++ i=24 +++ '[' 24 -lt 24 ']' +++ printf XXXXXXXXXXXXXXXXXXXXXXXX +++ return 0 ++ mktemp -d --tmpdir=/var/lib/jenkins/tmp/ tmp.XXXXXXXXXXXXXXXXXXXXXXXX + TEMP_DIR=/var/lib/jenkins/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y + temp_cleanup+=("${TEMP_DIR}") + mkdir -p -- /var/lib/jenkins/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y/nx-libs + chmod 2770 -Rf -- /var/lib/jenkins/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y + cd /var/lib/jenkins/build/heuler/nx-libs + git clone --no-hardlinks --no-local /var/lib/jenkins/build/heuler/nx-libs /var/lib/jenkins/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y/nx-libs/ Cloning into '/var/lib/jenkins/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y/nx-libs'... + cd /var/lib/jenkins/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y/nx-libs + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + find /var/lib/jenkins/build/heuler/nx-libs/../ -maxdepth 0 -mindepth 0 -type f + grep -qs 'nx-libs_*.orig.tar.gz' ++ gitrevno + GITREV=3019 + SA_OPTION= + test -f debian/source/format + grep -Eqs '^3.0.*$quilt$$' debian/source/format + '[' -n 4 ']' + '[' 4 -gt 3 ']' + typeset -l codename=buster + '[' buster = sid ']' + typeset numerical_version= + typeset pretty_dist= + typeset -i tmp_ret=1 ++ map_codename_to_numerical_version debian buster ++ typeset dist=debian ++ typeset codename_in=buster ++ '[' -n 4 ']' ++ '[' 4 -gt 3 ']' ++ typeset -l codename=buster ++ '[' buster = sid ']' ++ typeset numerical_version= ++ typeset -i ret=1 ++ '[' debian = debian ']' +++ debian-codename-to-version.sh buster ++ numerical_version=10 ++ ret=0 ++ echo 10 ++ return 0 + numerical_version=10 + tmp_ret=0 + '[' -n debian ']' + '[' debian = debian ']' + pretty_dist=Debian + '[' -n debian ']' + '[' debian = ubuntu ']' + '[' 0 -ne 0 ']' + '[' -z 10 ']' + '[' xheuler '!=' xmain ']' + mv -- debian/control debian/control.tmp + sed 's,Section:[\ ]*$.*$,Section: heuler/\1,g' debian/control.tmp + '[' heuler '!=' heuler ']' + dch --distribution buster --force-distribution -l '~git20180616.3019+10.heuler.' 'Development-Snapshot!!! Auto-built Debian buster (10) package for packages.x2go.org repository (Git commit: 742957393627b6556d6f27aaff29c17f23c9b0d2).' + typeset -i skip_arch_all=0 + typeset -a arches + arches=() + case "${PLATFORM}" in + arches+=("amd64" "i386") + '[' debian = raspbian ']' + typeset cur_arch= + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/nx-libs/debian/buster/amd64 + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/nx-libs/debian/buster/i386 + OTHERMIRROR= + '[' xheuler = xheuler ']' + grep -qs nx-libs + OTHERMIRROR='deb http://packages.x2go.org/debian buster main heuler' + '[' nx-libs = x2gomatebindings ']' + git --no-pager log --since '2 years ago' '--format=%ai %aN (%h) %n%n%x09*%w(68,0,10) %s%d%n' + typeset -a sbuild_options + sbuild_options=("-n" "--jobs=2" "-sA" "--dist=${codename}" "--keyid=${GPG_KEY}") + '[' 10 -gt 8 ']' + sbuild_options+=("--build-dep-resolver=apt") + sbuild_options+=("--resolve-alternatives") + '[' -n '' ']' + '[' -n 'deb http://packages.x2go.org/debian buster main heuler' ']' + sbuild_options+=("--extra-repository=${OTHERMIRROR}") + typeset -a sbuild_options_amd64 sbuild_options_i386 sbuild_options_armhf sbuild_options_powerpc sbuild_options_ppc64 sbuild_options_ppc64el + sbuild_options_amd64=("${sbuild_options[@]}") + sbuild_options_i386=("${sbuild_options[@]}" "--arch=i386" "--debbuildopts=-B") + sbuild_options_armhf=("${sbuild_options[@]}" "--arch=armhf" "--chroot=${codename}-armhf-raspbian-sbuild") + sbuild_options_powerpc=("${sbuild_options[@]}" "--debbuildopts=-B") + sbuild_options_ppc64=("${sbuild_options[@]}" "--arch=ppc64" "--chroot=${codename}-ppc64-sbuild" "--debbuildopts=-B") + sbuild_options_ppc64el=("${sbuild_options[@]}" "--debbuildopts=-B") + typeset base_arch=amd64 + '[' -n amd64 ']' + '[' x '!=' xamd64 ']' + grep -Eqs 'Architecture.*(all|any|amd64)' /var/lib/jenkins/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y/nx-libs/debian/control + typeset -i has_arch_dep=0 + grep -Eqs 'Architecture.*(any|amd64)' /var/lib/jenkins/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y/nx-libs/debian/control + has_arch_dep=1 + '[' 1 -eq 1 ']' + typeset 'indirect=sbuild_options_amd64[@]' + typeset -a indirect_resolve + indirect_resolve=("${!indirect}") + cd /var/lib/jenkins/pkg-dist/heuler/nx-libs/debian/buster/amd64 + nice sbuild -n --jobs=2 -sA --dist=buster --keyid=F4A7678C9C6B0B2B --build-dep-resolver=apt --resolve-alternatives '--extra-repository=deb http://packages.x2go.org/debian buster main heuler' /var/lib/jenkins/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y/nx-libs CONFIGURE="./configure --disable-silent-rules \ --prefix=/usr \ --libdir="/usr/lib/x86_64-linux-gnu" \ --includedir="/usr/include/x86_64-linux-gnu" \ --libexecdir=""/usr/lib/x86_64-linux-gnu"/nx/bin" \ --build=x86_64-linux-gnu \ --host=x86_64-linux-gnu" dh clean --no-parallel --with quilt dh_testdir debian/rules override_dh_auto_clean make[1]: Entering directory '/home/_jenkins_/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y/nx-libs' rm -Rf nx-X11/.build-exports dh_auto_clean --no-parallel make -j1 distclean make[2]: Entering directory '/home/_jenkins_/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y/nx-libs' if test -f nxcomp/Makefile; then make -C nxcomp clean; fi if test -f nxproxy/Makefile; then make -C nxproxy clean; fi if test -f nx-X11/lib/Makefile; then make -C nx-X11/lib clean; fi if test -f nxcompshad/Makefile; then make -C nxcompshad clean; fi if test -d nx-X11; then make clean-env; fi make[3]: Entering directory '/home/_jenkins_/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y/nx-libs' # prepare nx-X11/config/cf/nxversion.def sed \ -e 's/###NX_VERSION_MAJOR###/3/' \ -e 's/###NX_VERSION_MINOR###/5/' \ -e 's/###NX_VERSION_MICRO###/99/' \ -e 's/###NX_VERSION_PATCH###/16/' \ nx-X11/config/cf/nxversion.def.in \ > nx-X11/config/cf/nxversion.def for header in Xlib.h Xresource.h Xutil.h cursorfont.h Xlibint.h Xcms.h Xlocale.h XKBlib.h XlibConf.h Xregion.h ImUtil.h ; do \ rm -f nx-X11/exports/include/nx-X11/${header}; \ done for header in transport.c Xtrans.c Xtrans.h Xtransint.h Xtranslcl.c Xtranssock.c Xtransutil.c ; do \ rm -f nx-X11/exports/include/nx-X11/Xtrans/${header}; \ done [ -d exports/include/nx-X11/Xtrans ] && rmdir -p --ignore-fail-on-non-empty exports/include/nx-X11/Xtrans/ || : [ -d exports/include/nx-X11/ ] && rmdir -p --ignore-fail-on-non-empty exports/include/nx-X11/ || : make -j1 -C nx-X11 clean FONT_DEFINES=" " XEXT_EXTRA_DEFINES="" IMAKE_DEFINES="" make[4]: Entering directory '/home/_jenkins_/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y/nx-libs/nx-X11' if [ -f xmakefile ]; then \ set -x; \ rm -f xmakefile.bak; \ mv xmakefile xmakefile.bak; \ else \ exit 0; \ fi which imake 1>/dev/null && imake -I./config/cf -s xmakefile -DTOPDIR=. -DCURDIR=. Makefile:66: recipe for target 'xmakefile' failed make[4]: *** [xmakefile] Error 1 make[4]: Leaving directory '/home/_jenkins_/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y/nx-libs/nx-X11' Makefile:117: recipe for target 'clean-env' failed make[3]: *** [clean-env] Error 2 make[3]: Leaving directory '/home/_jenkins_/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y/nx-libs' Makefile:71: recipe for target 'clean' failed make[2]: *** [clean] Error 2 make[2]: Leaving directory '/home/_jenkins_/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y/nx-libs' dh_auto_clean: make -j1 distclean returned exit code 2 debian/rules:25: recipe for target 'override_dh_auto_clean' failed make[1]: *** [override_dh_auto_clean] Error 2 make[1]: Leaving directory '/home/_jenkins_/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y/nx-libs' debian/rules:16: recipe for target 'clean' failed make: *** [clean] Error 2 E: Failed to clean source directory /home/_jenkins_/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y/nx-libs (/home/_jenkins_/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y/nx-libs_3.5.99.16-1~git20180616.3019+10.heuler.1.dsc) + cleanup + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n '' ']' + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y ']' + '[' -d /var/lib/jenkins/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.915UGCPTcXW6BRBrwHML0w4y Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: nx-libs+nightly+debian-sid #197
by jenkins＠x2go.org 16 Jun '18

16 Jun '18

See <http://jenkins.x2go.org:8080/job/nx-libs+nightly+debian-sid/197/display/red…> Changes: [mike.gabriel] Makefile: Don't do a parallel clean-up of nx-X11. We have seen failures [mike.gabriel] Makefile targets: Rewriting and consolidating the target structure for [mike.gabriel] debian/rules: Avoid dh_auto_build. It adds -Oline since 11.2 which let's [mike.gabriel] debian/rules: Drop override_dh_clean. Makefile (et al.) removal in [mike.gabriel] debian/rules: Typo fix (NUMJOBS, not NUM_JOBS). [mike.gabriel] Makefile: Enforce -j1 for BuildDependsOnly target. [mike.gabriel] Revert "debian/rules: Typo fix (NUMJOBS, not NUM_JOBS)." [mike.gabriel] Revert "debian/rules: Avoid dh_auto_build. It adds -Oline since 11.2 [mike.gabriel] Makefile: Run BuildIncludes and clean target in nx-X11/ with -j1. [mike.gabriel] debian/rules: Run dh_auto_clean with --no-parallel. [ionic] nx-libs.spec: we never used gpg-offline, drop it. [mike.gabriel] nxcomp: fix spelling errors as reported by codespell [mike.gabriel] nxcompshad: fix spelling errors as reported by codespell [mike.gabriel] hw/nxagent: fix spelling errors as reported by codespell [mike.gabriel] manpage: fix spelling error as reported by codespell [mike.gabriel] compext: fix spelling errors as reported by codespell [mike.gabriel] nxproxy: fix spelling errors as reported by codespell [mike.gabriel] config/cf: fix spelling errors as reported by codespell [mike.gabriel] debian/rules: Highly enforce --no-parallel mode while Xserver is still [mike.gabriel] debian/rules: Typo fix in dh_auto_build --no-parallel option. [mike.gabriel] Screen.c: replace XSetWMNormalHints code block by already existing [mike.gabriel] Screen.c/Events.c: add some FIXMEs [mike.gabriel] nxagent: use XAllocSizeHints() instead of XSizeHints struct [mike.gabriel] Screen.c/Events.c: fix some comments [mike.gabriel] nxagent: remove mmwidth/mmheight from nxagentChangeScreenConfig [mike.gabriel] Events.c: catch intermediate window position changes [mike.gabriel] Screen.c: simplify setting of window name/class [mike.gabriel] whitespace fixes [mike.gabriel] Update Xinerama on XMapEvent [uli42] Clipboard.c: add missing include ------------------------------------------ [...truncated 14.04 KB...] +++ ret=XXXXXX +++ i=6 +++ '[' 6 -lt 24 ']' ++++ printf X +++ ret=XXXXXXX +++ i=7 +++ '[' 7 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXX +++ i=8 +++ '[' 8 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXX +++ i=9 +++ '[' 9 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXX +++ i=10 +++ '[' 10 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXX +++ i=11 +++ '[' 11 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXX +++ i=12 +++ '[' 12 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXX +++ i=13 +++ '[' 13 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXX +++ i=14 +++ '[' 14 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXX +++ i=15 +++ '[' 15 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXX +++ i=16 +++ '[' 16 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXX +++ i=17 +++ '[' 17 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXX +++ i=18 +++ '[' 18 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXX +++ i=19 +++ '[' 19 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXX +++ i=20 +++ '[' 20 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXX +++ i=21 +++ '[' 21 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXX +++ i=22 +++ '[' 22 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXX +++ i=23 +++ '[' 23 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXXX +++ i=24 +++ '[' 24 -lt 24 ']' +++ printf XXXXXXXXXXXXXXXXXXXXXXXX +++ return 0 ++ mktemp -d --tmpdir=/var/lib/jenkins/tmp/ tmp.XXXXXXXXXXXXXXXXXXXXXXXX + TEMP_DIR=/var/lib/jenkins/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn + temp_cleanup+=("${TEMP_DIR}") + mkdir -p -- /var/lib/jenkins/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn/nx-libs + chmod 2770 -Rf -- /var/lib/jenkins/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn + cd /var/lib/jenkins/build/heuler/nx-libs + git clone --no-hardlinks --no-local /var/lib/jenkins/build/heuler/nx-libs /var/lib/jenkins/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn/nx-libs/ Cloning into '/var/lib/jenkins/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn/nx-libs'... + cd /var/lib/jenkins/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn/nx-libs + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + find /var/lib/jenkins/build/heuler/nx-libs/../ -maxdepth 0 -mindepth 0 -type f + grep -qs 'nx-libs_*.orig.tar.gz' ++ gitrevno + GITREV=3019 + SA_OPTION= + test -f debian/source/format + grep -Eqs '^3.0.*$quilt$$' debian/source/format + '[' -n 4 ']' + '[' 4 -gt 3 ']' + typeset -l codename=sid + '[' sid = sid ']' + codename=unstable + typeset numerical_version= + typeset pretty_dist= + typeset -i tmp_ret=1 ++ map_codename_to_numerical_version debian unstable ++ typeset dist=debian ++ typeset codename_in=unstable ++ '[' -n 4 ']' ++ '[' 4 -gt 3 ']' ++ typeset -l codename=unstable ++ '[' unstable = sid ']' ++ typeset numerical_version= ++ typeset -i ret=1 ++ '[' debian = debian ']' +++ debian-codename-to-version.sh unstable ++ numerical_version=9999 ++ ret=0 ++ echo 9999 ++ return 0 + numerical_version=9999 + tmp_ret=0 + '[' -n debian ']' + '[' debian = debian ']' + pretty_dist=Debian + '[' -n debian ']' + '[' debian = ubuntu ']' + '[' 0 -ne 0 ']' + '[' -z 9999 ']' + '[' xheuler '!=' xmain ']' + mv -- debian/control debian/control.tmp + sed 's,Section:[\ ]*$.*$,Section: heuler/\1,g' debian/control.tmp + '[' heuler '!=' heuler ']' + dch --distribution unstable --force-distribution -l '~git20180616.3019+9999.heuler.' 'Development-Snapshot!!! Auto-built Debian sid (9999) package for packages.x2go.org repository (Git commit: 742957393627b6556d6f27aaff29c17f23c9b0d2).' + typeset -i skip_arch_all=0 + typeset -a arches + arches=() + case "${PLATFORM}" in + arches+=("amd64" "i386") + '[' debian = raspbian ']' + typeset cur_arch= + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/nx-libs/debian/sid/amd64 + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/nx-libs/debian/sid/i386 + OTHERMIRROR= + '[' xheuler = xheuler ']' + grep -qs nx-libs + OTHERMIRROR='deb http://packages.x2go.org/debian sid main heuler' + '[' nx-libs = x2gomatebindings ']' + git --no-pager log --since '2 years ago' '--format=%ai %aN (%h) %n%n%x09*%w(68,0,10) %s%d%n' + typeset -a sbuild_options + sbuild_options=("-n" "--jobs=2" "-sA" "--dist=${codename}" "--keyid=${GPG_KEY}") + '[' 9999 -gt 8 ']' + sbuild_options+=("--build-dep-resolver=apt") + sbuild_options+=("--resolve-alternatives") + '[' -n '' ']' + '[' -n 'deb http://packages.x2go.org/debian sid main heuler' ']' + sbuild_options+=("--extra-repository=${OTHERMIRROR}") + typeset -a sbuild_options_amd64 sbuild_options_i386 sbuild_options_armhf sbuild_options_powerpc sbuild_options_ppc64 sbuild_options_ppc64el + sbuild_options_amd64=("${sbuild_options[@]}") + sbuild_options_i386=("${sbuild_options[@]}" "--arch=i386" "--debbuildopts=-B") + sbuild_options_armhf=("${sbuild_options[@]}" "--arch=armhf" "--chroot=${codename}-armhf-raspbian-sbuild") + sbuild_options_powerpc=("${sbuild_options[@]}" "--debbuildopts=-B") + sbuild_options_ppc64=("${sbuild_options[@]}" "--arch=ppc64" "--chroot=${codename}-ppc64-sbuild" "--debbuildopts=-B") + sbuild_options_ppc64el=("${sbuild_options[@]}" "--debbuildopts=-B") + typeset base_arch=amd64 + '[' -n amd64 ']' + '[' x '!=' xamd64 ']' + grep -Eqs 'Architecture.*(all|any|amd64)' /var/lib/jenkins/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn/nx-libs/debian/control + typeset -i has_arch_dep=0 + grep -Eqs 'Architecture.*(any|amd64)' /var/lib/jenkins/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn/nx-libs/debian/control + has_arch_dep=1 + '[' 1 -eq 1 ']' + typeset 'indirect=sbuild_options_amd64[@]' + typeset -a indirect_resolve + indirect_resolve=("${!indirect}") + cd /var/lib/jenkins/pkg-dist/heuler/nx-libs/debian/sid/amd64 + nice sbuild -n --jobs=2 -sA --dist=unstable --keyid=F4A7678C9C6B0B2B --build-dep-resolver=apt --resolve-alternatives '--extra-repository=deb http://packages.x2go.org/debian sid main heuler' /var/lib/jenkins/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn/nx-libs CONFIGURE="./configure --disable-silent-rules \ --prefix=/usr \ --libdir="/usr/lib/x86_64-linux-gnu" \ --includedir="/usr/include/x86_64-linux-gnu" \ --libexecdir=""/usr/lib/x86_64-linux-gnu"/nx/bin" \ --build=x86_64-linux-gnu \ --host=x86_64-linux-gnu" dh clean --no-parallel --with quilt dh_testdir debian/rules override_dh_auto_clean make[1]: Entering directory '/home/_jenkins_/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn/nx-libs' rm -Rf nx-X11/.build-exports dh_auto_clean --no-parallel make -j1 distclean make[2]: Entering directory '/home/_jenkins_/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn/nx-libs' if test -f nxcomp/Makefile; then make -C nxcomp clean; fi if test -f nxproxy/Makefile; then make -C nxproxy clean; fi if test -f nx-X11/lib/Makefile; then make -C nx-X11/lib clean; fi if test -f nxcompshad/Makefile; then make -C nxcompshad clean; fi if test -d nx-X11; then make clean-env; fi make[3]: Entering directory '/home/_jenkins_/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn/nx-libs' # prepare nx-X11/config/cf/nxversion.def sed \ -e 's/###NX_VERSION_MAJOR###/3/' \ -e 's/###NX_VERSION_MINOR###/5/' \ -e 's/###NX_VERSION_MICRO###/99/' \ -e 's/###NX_VERSION_PATCH###/16/' \ nx-X11/config/cf/nxversion.def.in \ > nx-X11/config/cf/nxversion.def for header in Xlib.h Xresource.h Xutil.h cursorfont.h Xlibint.h Xcms.h Xlocale.h XKBlib.h XlibConf.h Xregion.h ImUtil.h ; do \ rm -f nx-X11/exports/include/nx-X11/${header}; \ done for header in transport.c Xtrans.c Xtrans.h Xtransint.h Xtranslcl.c Xtranssock.c Xtransutil.c ; do \ rm -f nx-X11/exports/include/nx-X11/Xtrans/${header}; \ done [ -d exports/include/nx-X11/Xtrans ] && rmdir -p --ignore-fail-on-non-empty exports/include/nx-X11/Xtrans/ || : [ -d exports/include/nx-X11/ ] && rmdir -p --ignore-fail-on-non-empty exports/include/nx-X11/ || : make -j1 -C nx-X11 clean FONT_DEFINES=" " XEXT_EXTRA_DEFINES="" IMAKE_DEFINES="" make[4]: Entering directory '/home/_jenkins_/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn/nx-libs/nx-X11' if [ -f xmakefile ]; then \ set -x; \ rm -f xmakefile.bak; \ mv xmakefile xmakefile.bak; \ else \ exit 0; \ fi which imake 1>/dev/null && imake -I./config/cf -s xmakefile -DTOPDIR=. -DCURDIR=. Makefile:66: recipe for target 'xmakefile' failed make[4]: *** [xmakefile] Error 1 make[4]: Leaving directory '/home/_jenkins_/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn/nx-libs/nx-X11' Makefile:117: recipe for target 'clean-env' failed make[3]: *** [clean-env] Error 2 make[3]: Leaving directory '/home/_jenkins_/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn/nx-libs' Makefile:71: recipe for target 'clean' failed make[2]: *** [clean] Error 2 make[2]: Leaving directory '/home/_jenkins_/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn/nx-libs' dh_auto_clean: make -j1 distclean returned exit code 2 debian/rules:25: recipe for target 'override_dh_auto_clean' failed make[1]: *** [override_dh_auto_clean] Error 2 make[1]: Leaving directory '/home/_jenkins_/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn/nx-libs' debian/rules:16: recipe for target 'clean' failed make: *** [clean] Error 2 E: Failed to clean source directory /home/_jenkins_/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn/nx-libs (/home/_jenkins_/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn/nx-libs_3.5.99.16-1~git20180616.3019+9999.heuler.1.dsc) + cleanup + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n '' ']' + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn ']' + '[' -d /var/lib/jenkins/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.b8FCq4VLy23tYSiHGyMfxswn Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: nx-libs+nightly+opensuse-15.0 #1
by jenkins＠x2go.org 16 Jun '18

16 Jun '18

See <http://jenkins.x2go.org:8080/job/nx-libs+nightly+opensuse-15.0/1/display/re…> ------------------------------------------ [...truncated 9.07 KB...] +++ return 0 ++ mktemp -d --tmpdir=/var/lib/jenkins/tmp/ tmp.XXXXXXXXXXXXXXXXXXXXXXXX + TEMP_DIR=/var/lib/jenkins/tmp/tmp.wa5IhUoWdceITs6eHakPsIF1 + temp_cleanup+=("${TEMP_DIR}") + mkdir -p -- /var/lib/jenkins/tmp/tmp.wa5IhUoWdceITs6eHakPsIF1/nx-libs + chmod -Rf -- 2770 /var/lib/jenkins/tmp/tmp.wa5IhUoWdceITs6eHakPsIF1 + cd /var/lib/jenkins/build/heuler/nx-libs + git clone --no-hardlinks --no-local /var/lib/jenkins/build/heuler/nx-libs /var/lib/jenkins/tmp/tmp.wa5IhUoWdceITs6eHakPsIF1/nx-libs/ Cloning into '/var/lib/jenkins/tmp/tmp.wa5IhUoWdceITs6eHakPsIF1/nx-libs'... + cd /var/lib/jenkins/tmp/tmp.wa5IhUoWdceITs6eHakPsIF1 ++ cd nx-libs ++ gitrevno ++ cd - + GITREV=2985 + pushd nx-libs + git --no-pager log --since '2 years ago' '--format=%ai %aN (%h) %n%n%x09*%w(68,0,10) %s%d%n' + popd + rm -Rf -- nx-libs/.git + mv -- nx-libs/nx-libs.spec . ++ grep -E -- '^Version:.*' nx-libs.spec ++ awk '{ print $2 }' + UPSTREAM_VERSION=3.5.99.16 ++ grep -E -- '^Release:.*' nx-libs.spec ++ awk '{ print $2 }' + PKG_RELEASE='0.0build1%{?dist}' ++ sed -e 's/%{?dist}//' + PKG_SRCRELEASE=0.0build1 ++ grep -qsE -- '^BuildArch:.*noarch$' nx-libs.spec ++ echo no + IS_NOARCH=no + '[' heuler = heuler ']' + IS_RELEASE=0 + sed -i nx-libs.spec -e 's/%{?dist}/.0.git20180616.2985.heuler%{?dist}/' + '[' -f nx-libs/debian/patches/series ']' + cd nx-libs + QUILT_PATCHES=debian/patches + quilt push -a Applying patch debian/patches/2001_nx-X11_install-location.debian.patch patching file nx-X11/config/cf/Imake.tmpl Hunk #1 succeeded at 733 (offset 11 lines). Hunk #2 succeeded at 751 (offset 11 lines). patching file nx-X11/config/cf/site.def Applying patch debian/patches/2002_xserver-xext_set-securitypolicy-path.debian.patch patching file nx-X11/programs/Xserver/Xext/security.c Now at patch debian/patches/2002_xserver-xext_set-securitypolicy-path.debian.patch + rm -Rf -- .pc/ + grep -E '^Source[1-9]+:.*' nx-libs.spec + sed 's/%{name}/nx-libs/' + awk '{ print $2 }' + read source_file + mv -- /var/lib/jenkins/tmp/tmp.wa5IhUoWdceITs6eHakPsIF1/nx-libs /var/lib/jenkins/tmp/tmp.wa5IhUoWdceITs6eHakPsIF1/nx-libs-3.5.99.16 + tar -czf /var/lib/jenkins/pkg-dist/heuler/nx-libs/opensuse/15.0/SRPM/rpmbuild/SOURCES/nx-libs-3.5.99.16.tar.gz nx-libs-3.5.99.16 + cp -- nx-libs.spec /var/lib/jenkins/pkg-dist/heuler/nx-libs/opensuse/15.0/SRPM/rpmbuild/SOURCES + cd + rm -Rf -- /var/lib/jenkins/tmp/tmp.wa5IhUoWdceITs6eHakPsIF1/nx-libs + '[' xopensuse = xopensuse ']' + typeset -a arches_copy + arches_copy=("${arches[@]}") + typeset -i i=0 + (( i = 0 )) + (( i < 3 )) + [[ SRPM == \i\3\8\6 ]] + (( ++i )) + (( i < 3 )) + [[ x86_64 == \i\3\8\6 ]] + (( ++i )) + (( i < 3 )) + [[ i386 == \i\3\8\6 ]] + arches_copy[i]=i586 + (( ++i )) + (( i < 3 )) + typeset arch= + for arch in "${arches_copy[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/nx-libs/opensuse/15.0/SRPM + for arch in "${arches_copy[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/nx-libs/opensuse/15.0/x86_64 + for arch in "${arches_copy[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/nx-libs/opensuse/15.0/i586 + BUILD_RESULT=/home/abuild/rpmbuild/ + typeset obs_config_dir=obs-config + download_urls=() + typeset -a download_urls + download_url=() + typeset -a download_url + extra_obs_build_args=() + typeset -a extra_obs_build_args + typeset obs_build_vendor_tag= ++ map_prefix_to_vendor x2go ++ typeset prefix=x2go ++ typeset out= ++ typeset ret=1 ++ case "${prefix}" in ++ out=X2Go ++ ret=0 ++ printf %s X2Go ++ return 0 + obs_build_vendor_tag=X2Go + '[' 0 -ne 0 ']' + extra_obs_build_args+=("--define" "%vendor ${obs_build_vendor_tag}") + typeset -i tmp_suse_major_version=0 + typeset -i tmp_suse_minor_version=0 + [[ 15.0 = \t\u\m\b\l\e\w\e\e\d ]] ++ get_generic_major_version 15.0 ++ typeset version=15.0 ++ typeset -i ret=0 ++ '[' -z 15.0 ']' ++ typeset -i tmp_major_version=0 +++ sed -e '/^$[0-9][0-9]*$\.[0-9][0-9]*$/!d;s//\1/' ++ tmp_major_version=15 ++ '[' 15 -ne 0 ']' ++ echo 15 ++ return 0 + tmp_suse_major_version=15 + '[' 0 -ne 0 ']' ++ get_generic_minor_version 15.0 ++ typeset version=15.0 ++ typeset -i ret=0 ++ '[' -z 15.0 ']' ++ typeset -i tmp_minor_version=-1 +++ sed -e '/^[0-9][0-9]*\.$[0-9][0-9]*$$/!d;s//\1/' ++ tmp_minor_version=0 ++ echo 0 ++ return 0 + tmp_suse_minor_version=0 + '[' 0 -ne 0 ']' + '[' xopensuse = xopensuse ']' + typeset -i legacy_release=0 ++ wrap_suse_major_version 15 ++ typeset major_version=15 ++ typeset -i tmp_major_version=15 ++ [[ 15 -lt 10 ]] ++ [[ 15 -eq 42 ]] ++ echo 15 ++ return 0 + tmp_suse_major_version=15 + '[' 0 -ne 0 ']' + [[ 15 != \9\9\9\9 ]] + '[' 15 -lt 14 ']' + '[' 15 -eq 14 ']' + '[' 0 -eq 1 ']' + [[ 15 = \9\9\9\9 ]] + download_url=("${OPENSUSE_DOWNLOAD_URL[@]}") + (( i = 0 )) + (( i < 2 )) ++ sed -e s/#VERSION#/15.0/g + download_url[i]=https://download.opensuse.org/distribution/#LEAP#15.0/repo/… + (( ++i )) + (( i < 2 )) ++ sed -e s/#VERSION#/15.0/g + download_url[i]=https://download.opensuse.org/update/#LEAP#15.0/oss/ + (( ++i )) + (( i < 2 )) + [[ 15 -lt 15 ]] + (( i = 0 )) + (( i < 2 )) ++ sed -e s_#SUSESUBDIR#__g + download_url[i]=https://download.opensuse.org/distribution/#LEAP#15.0/repo/… + (( ++i )) + (( i < 2 )) ++ sed -e s_#SUSESUBDIR#__g + download_url[i]=https://download.opensuse.org/update/#LEAP#15.0/oss/ + (( ++i )) + (( i < 2 )) + [[ 15 != \9\9\9\9 ]] + '[' 15 -gt 13 ']' + (( i = 0 )) + (( i < 2 )) ++ sed -e s_#LEAP#_leap/_g + download_url[i]=https://download.opensuse.org/distribution/leap/15.0/repo/o… + (( ++i )) + (( i < 2 )) ++ sed -e s_#LEAP#_leap/_g + download_url[i]=https://download.opensuse.org/update/leap/15.0/oss/ + (( ++i )) + (( i < 2 )) + for url in "${download_url[@]}" + download_urls+=('--repo' "${url}") + for url in "${download_url[@]}" + download_urls+=('--repo' "${url}") + typeset -i noarch_built=0 + for l_ARCH in "${arches[@]}" + '[' SRPM = SRPM ']' + typeset base_arch=x86_64 + '[' -z x86_64 ']' + '[' xopensuse = xfedora ']' + '[' xopensuse = xepel ']' + ps ax + grep -E 'build.*/var/cache/obs-build/opensuse/15.0/x86_64/' + grep 'sudo obs' + get_extra_repository suse opensuse 15.0 heuler nx-libs x86_64 1 + typeset TYPE=suse + typeset DIST=opensuse + typeset CODENAME=15.0 + typeset COMPONENT=heuler + typeset PACKAGE=nx-libs + typeset ARCH=x86_64 ++ make_boolean 1 ++ typeset -l OPTION=1 ++ case "${OPTION}" in ++ OPTION=1 ++ printf 1 ++ return 0 + typeset WANT_EXTRA=1 + case "${TYPE}" in + OTHERMIRROR= + '[' 1 -eq 1 ']' + OTHERMIRROR='--repo suse@https://packages.x2go.org/opensuse/15.0/extras' + '[' -z x2go-keyring ']' + '[' x2go-keyring '!=' nx-libs ']' + OTHERMIRROR='--repo suse@https://packages.x2go.org/opensuse/15.0/extras --repo suse@https://packages.x2go.org/opensuse/15.0/heuler' + return 0 + sudo obs-build --nosignature --repo suse@https://packages.x2go.org/opensuse/15.0/extras --repo suse@https://packages.x2go.org/opensuse/15.0/heuler --repo https://download.opensuse.org/distribution/leap/15.0/repo/oss// --repo https://download.opensuse.org/update/leap/15.0/oss/ --root /var/cache/obs-build/opensuse/15.0/x86_64/ --clean --stage=-bs --define '%vendor X2Go' /var/lib/jenkins/pkg-dist/heuler/nx-libs/opensuse/15.0/SRPM/rpmbuild/SOURCES/nx-libs.spec logging output to /var/cache/obs-build/opensuse/15.0/x86_64/.build.log... [ 0s] Memory limit set to 33053012KB [ 0s] Using BUILD_ROOT=/var/cache/obs-build/opensuse/15.0/x86_64 [ 0s] Using BUILD_ARCH=x86_64:i686:i586:i486:i386 [ 0s] [ 0s] [ 0s] japsand started "build nx-libs.spec" at Sat Jun 16 12:32:29 UTC 2018. [ 0s] [ 0s] [ 0s] processing recipe /var/lib/jenkins/pkg-dist/heuler/nx-libs/opensuse/15.0/SRPM/rpmbuild/SOURCES/nx-libs.spec ... [ 0s] init_buildsystem --configdir /usr/lib/obs-build/configs --cachedir /var/cache/obs-build --define %vendor X2Go --repository suse@https://packages.x2go.org/opensuse/15.0/extras --repository suse@https://packages.x2go.org/opensuse/15.0/heuler --repository https://download.opensuse.org/distribution/leap/15.0/repo/oss// --repository https://download.opensuse.org/update/leap/15.0/oss/ --clean --nosignature /var/lib/jenkins/pkg-dist/heuler/nx-libs/opensuse/15.0/SRPM/rpmbuild/SOURCES/nx-libs.spec ... [ 0s] initializing /var/cache/obs-build/opensuse/15.0/x86_64/.srcfiles.cache ... [ 0s] /usr/lib/obs-build/createyastdeps --cachedir=/var/cache/obs-build https://packages.x2go.org/opensuse/15.0/extras [ 0s] /usr/lib/obs-build/createyastdeps --cachedir=/var/cache/obs-build https://packages.x2go.org/opensuse/15.0/heuler [ 0s] /usr/lib/obs-build/createrepomddeps --cachedir=/var/cache/obs-build https://download.opensuse.org/distribution/leap/15.0/repo/oss// [ 10s] /usr/lib/obs-build/createrepomddeps --cachedir=/var/cache/obs-build https://download.opensuse.org/update/leap/15.0/oss/ [ 10s] expanding package dependencies... [ 11s] Warning: distribution not specified, assuming '15.0-x86_64' (see /usr/lib/obs-build/configs). [ 11s] 15.0-x86_64.conf not found, using default.conf [ 11s] /usr/lib/obs-build/configs/default.conf: No such file or directory [ 11s] [ 11s] japsand failed "build nx-libs.spec" at Sat Jun 16 12:32:40 UTC 2018. [ 11s] + exit 1 + cleanup + '[' -n '' ']' + '[' -n '' ']' + echo 'Warning: mock temporary config directory not defined. Skipping cleanup.' Warning: mock temporary config directory not defined. Skipping cleanup. + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.wa5IhUoWdceITs6eHakPsIF1 ']' + '[' -d /var/lib/jenkins/tmp/tmp.wa5IhUoWdceITs6eHakPsIF1 ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.wa5IhUoWdceITs6eHakPsIF1 Build step 'Execute shell' marked build as failure

1 3

[nx-libs] branch master updated (7429573 -> 8f73bf7)
by git-admin＠x2go.org 16 Jun '18

16 Jun '18

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch master in repository nx-libs. from 7429573 Merge branch 'uli42-pr/fix_missing_include' into 3.6.x adds 8f73bf7 debian/rules: unbreak Jessie: dh_auto_clean doesn't gracefully discard unknown --no-parallel flag. No new revisions were added by this update. Summary of changes: debian/rules | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/nx-libs.git

1 0

[nx-libs] branch 3.6.x updated (7429573 -> 8f73bf7)
by git-admin＠x2go.org 16 Jun '18

16 Jun '18

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch 3.6.x in repository nx-libs. from 7429573 Merge branch 'uli42-pr/fix_missing_include' into 3.6.x new 8f73bf7 debian/rules: unbreak Jessie: dh_auto_clean doesn't gracefully discard unknown --no-parallel flag. The 1 revisions listed above as "new" are entirely new to this repository and will be described in separate emails. The revisions listed as "adds" were already present in the repository and have only been added to this reference. Summary of changes: debian/rules | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/nx-libs.git

1 1

← Newer
1
...
7
8
9
10
11
12
13
...
17
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

x2go-commits June 2018