x2go-commits June 2018

x2go-commits@lists.x2go.org

3 participants
168 discussions

Build failed in Jenkins: x2gobroker+nightly+opensuse-15.0 #1
by jenkins＠x2go.org 13 Nov '18

13 Nov '18

See <http://jenkins.x2go.org:8080/job/x2gobroker+nightly+opensuse-15.0/1/display…> ------------------------------------------ [...truncated 118.69 KB...] [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/lib/tmpfiles.d/" [ 55s] # x2gobroker-loadchecker [ 55s] mkdir -p "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/sbin" "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/logrotate.d" \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/x2go/broker" "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/default" \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/share/man/man8" "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/lib/tmpfiles.d/" [ 55s] install -m 644 defaults/x2gobroker-loadchecker.default \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/default/x2gobroker-loadchecker" [ 55s] install -m 644 man/man8/x2gobroker-loadchecker.8* \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/share/man/man8" [ 55s] gzip -f --best "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/share/man/man8/"*.8 [ 55s] install -m 755 sbin/x2gobroker-loadchecker "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/sbin/" [ 55s] install -m 644 logrotate/x2gobroker-loadchecker \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/logrotate.d/" [ 55s] install -m 644 etc/broker/x2gobroker-loadchecker-logger.conf \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/x2go/broker/" [ 55s] install -m 644 tmpfiles.d/x2gobroker-loadchecker.conf \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/lib/tmpfiles.d/" [ 55s] # x2gobroker-daemon [ 55s] mkdir -p "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/logrotate.d/" "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/default" \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/lib/tmpfiles.d/" [ 55s] install -m 644 defaults/x2gobroker-daemon.default \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/default/x2gobroker-daemon" [ 55s] install -m 644 logrotate/x2gobroker-daemon \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/logrotate.d/" [ 55s] mkdir -p "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/bin" "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/sbin" \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/share/man/man1" "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/share/man/man8" [ 55s] install -m 644 man/man1/x2gobroker-daemon.1* \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/share/man/man1" [ 55s] gzip -f --best "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/share/man/man1/"*.1 [ 55s] install -m 644 man/man8/x2gobroker-daemon-debug.8* \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/share/man/man8" [ 55s] gzip -f --best "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/share/man/man8/"*.8 [ 55s] ln -sf x2gobroker \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/bin/x2gobroker-daemon" [ 55s] install -m 755 sbin/x2gobroker-daemon-debug \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/sbin/" [ 55s] install -m 644 tmpfiles.d/x2gobroker-daemon.conf \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/lib/tmpfiles.d/" [ 55s] # x2gobroker-ssh [ 55s] mkdir -p "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/bin" "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/sbin" \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/x2go/../sudoers.d" \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/share/man/man1" [ 55s] install -m 644 man/man1/x2gobroker-ssh.1* \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/share/man/man1" [ 55s] install -m 755 bin/x2gobroker-ssh \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/bin/" [ 55s] install -m 644 x2gobroker-ssh.sudo \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/x2go/../sudoers.d/" [ 55s] mv "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/x2go/../sudoers.d/x2gobroker-ssh.sudo" "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/x2go/../sudoers.d/x2gobroker-ssh" [ 55s] # x2gobroker-wsgi [ 55s] mkdir -p "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/x2go" "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/logrotate.d" [ 55s] install -m 644 etc/x2gobroker-wsgi.apache.{conf,vhost} \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/x2go/" [ 55s] install -m 644 logrotate/x2gobroker-wsgi "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/logrotate.d/" [ 55s] # x2gobroker [ 55s] mkdir -p "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/bin" "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/sbin" \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/share/man/man1" [ 55s] mkdir -p "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/bin" "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/sbin" \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/share/man/man8" [ 55s] install -m 644 man/man1/x2gobroker{,-testauth}.1* \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/share/man/man1" [ 55s] gzip -f --best "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/share/man/man1/"*.1 [ 55s] install -m 644 man/man8/x2gobroker{-keygen,-testagent}.8* \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/share/man/man8" [ 55s] gzip -f --best "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/share/man/man8/"*.8 [ 55s] install -m 755 bin/x2gobroker bin/x2gobroker-testauth \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/bin/" [ 55s] install -m 755 sbin/x2gobroker-keygen sbin/x2gobroker-testagent \ [ 55s] "/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/sbin/" [ 55s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//etc/apache2/conf.d /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//etc/apache2/vhosts.d [ 55s] + ln -s /etc/x2go/x2gobroker-wsgi.apache.conf /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//etc/apache2/conf.d/x2gobroker-wsgi.conf [ 55s] + ln -s /etc/x2go/x2gobroker-wsgi.apache.vhost /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//etc/apache2/vhosts.d/x2gobroker-wsgi.sample [ 55s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/lib/systemd/system [ 55s] + install -pm0644 x2gobroker-daemon.service /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/lib/systemd/system [ 55s] + install -pm0644 x2gobroker-authservice.service /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/lib/systemd/system [ 55s] + install -pm0644 x2gobroker-loadchecker.service /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/lib/systemd/system [ 55s] + rm -f /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/default/x2gobroker-daemon [ 55s] + rm -f /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/default/x2gobroker-authservice [ 55s] + rm -f /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/default/x2gobroker-loadchecker [ 55s] + rm -f /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/etc/default/python-x2gobroker [ 55s] + _target= [ 55s] + _symlinks=0 [ 55s] + fdupes -q -p -n -H -o name -r /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr [ 55s] + read _file [ 55s] + test -z '' [ 55s] + _target=/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/tmpfiles.d/x2gobroker-authservice.conf [ 55s] + read _file [ 55s] + test -z /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/tmpfiles.d/x2gobroker-authservice.conf [ 55s] + test -z /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/tmpfiles.d/x2gobroker-daemon.conf [ 55s] + test 0 = 1 [ 55s] + ln -f /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/tmpfiles.d/x2gobroker-authservice.conf /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/tmpfiles.d/x2gobroker-daemon.conf [ 55s] + read _file [ 55s] + test -z /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/tmpfiles.d/x2gobroker-authservice.conf [ 55s] + test -z /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/tmpfiles.d/x2gobroker-loadchecker.conf [ 55s] + test 0 = 1 [ 55s] + ln -f /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/tmpfiles.d/x2gobroker-authservice.conf /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/tmpfiles.d/x2gobroker-loadchecker.conf [ 55s] + read _file [ 55s] + test -z /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/tmpfiles.d/x2gobroker-authservice.conf [ 55s] + test -z '' [ 55s] + _target= [ 55s] + continue [ 55s] + read _file [ 55s] + test -z '' [ 55s] + _target=/home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/authmechs/__init__.py [ 55s] + read _file [ 55s] + test -z /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/authmechs/__init__.py [ 55s] + test -z /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/brokers/__init__.py [ 55s] + test 0 = 1 [ 55s] + ln -f /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/authmechs/__init__.py /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/brokers/__init__.py [ 55s] + read _file [ 55s] + test -z /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/authmechs/__init__.py [ 55s] + test -z /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/client/__init__.py [ 55s] + test 0 = 1 [ 55s] + ln -f /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/authmechs/__init__.py /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/client/__init__.py [ 55s] + read _file [ 55s] + test -z /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/authmechs/__init__.py [ 55s] + test -z /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/nameservices/__init__.py [ 55s] + test 0 = 1 [ 55s] + ln -f /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/authmechs/__init__.py /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/nameservices/__init__.py [ 55s] + read _file [ 55s] + test -z /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/authmechs/__init__.py [ 55s] + test -z /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/web/__init__.py [ 55s] + test 0 = 1 [ 55s] + ln -f /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/authmechs/__init__.py /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/web/__init__.py [ 55s] + read _file [ 55s] + test -z /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64//usr/lib/python3.6/site-packages/x2gobroker/authmechs/__init__.py [ 55s] + test -z '' [ 55s] + _target= [ 55s] + continue [ 55s] + read _file [ 55s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler --unique-debug-suffix -0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64 --unique-debug-src-base x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/x2gobroker-0.0.4.0 [ 55s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/bin/x2gobroker-ssh [ 55s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64/usr/lib/x2go/x2gobroker-agent [ 55s] /usr/lib/rpm/sepdebugcrcfix: Updated 2 CRC32s, 0 CRC32s did match. [ 55s] + /usr/lib/rpm/brp-compress [ 55s] + /usr/lib/rpm/brp-suse [ 55s] calling /usr/lib/rpm/brp-suse.d/brp-05-permissions [ 55s] setting / to root:root 0755. (wrong owner/group abuild:abuild) [ 55s] setting /etc/ to root:root 0755. (wrong owner/group abuild:abuild) [ 55s] setting /usr/ to root:root 0755. (wrong owner/group abuild:abuild) [ 55s] setting /var/log/ to root:root 0755. (wrong owner/group abuild:abuild) [ 55s] calling /usr/lib/rpm/brp-suse.d/brp-15-strip-debug [ 55s] calling /usr/lib/rpm/brp-suse.d/brp-25-symlink [ 55s] INFO: relinking /etc/apache2/conf.d/x2gobroker-wsgi.conf -> ../../x2go/x2gobroker-wsgi.apache.conf (was /etc/x2go/x2gobroker-wsgi.apache.conf) [ 55s] INFO: relinking /etc/apache2/vhosts.d/x2gobroker-wsgi.sample -> ../../x2go/x2gobroker-wsgi.apache.vhost (was /etc/x2go/x2gobroker-wsgi.apache.vhost) [ 55s] calling /usr/lib/rpm/brp-suse.d/brp-30-desktop [ 55s] WARNING: '/usr/lib/rpm/brp-desktop.data/suse-screensavers.menu' does not exist [ 55s] WARNING: '/usr/lib/rpm/brp-desktop.data/applications-kmenuedit.menu' does not exist [ 55s] WARNING: '/usr/lib/rpm/brp-desktop.data/custom.menu' does not exist [ 55s] calling /usr/lib/rpm/brp-suse.d/brp-35-rpath [ 55s] calling /usr/lib/rpm/brp-suse.d/brp-40-rootfs [ 55s] calling /usr/lib/rpm/brp-suse.d/brp-45-tcl [ 55s] calling /usr/lib/rpm/brp-suse.d/brp-50-check-python [ 55s] calling /usr/lib/rpm/brp-suse.d/brp-55-boot-scripts [ 55s] calling /usr/lib/rpm/brp-suse.d/brp-60-hook [ 55s] calling /usr/lib/rpm/brp-suse.d/brp-65-lib64-linux [ 55s] Processing files: x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64 [ 55s] Provides: x2gobroker = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler x2gobroker(x86-64) = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler [ 55s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 55s] Requires(pre): pwdutils python3-x2gobroker = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler [ 55s] Requires: /usr/bin/env [ 55s] Processing files: python3-x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64 [ 56s] Provides: config(python3-x2gobroker) = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler python3-x2gobroker = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler python3-x2gobroker(x86-64) = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler [ 56s] Requires(interp): /bin/sh /bin/sh /bin/sh [ 56s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 56s] Requires(verify): /bin/sh [ 56s] Requires(pre): /bin/sh permissions [ 56s] Requires(post): /bin/sh [ 56s] Requires: python(abi) = 3.6 [ 56s] Processing files: x2gobroker-authservice-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64 [ 56s] Provides: config(x2gobroker-authservice) = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler x2gobroker-authservice = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler x2gobroker-authservice(x86-64) = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler [ 56s] Requires(interp): /bin/sh /bin/sh /bin/sh /bin/sh /bin/sh [ 56s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 56s] Requires(verify): /bin/sh [ 56s] Requires(pre): /bin/sh permissions python3-x2gobroker = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler [ 56s] Requires(post): /bin/sh [ 56s] Requires(preun): /bin/sh [ 56s] Requires(postun): /bin/sh [ 56s] Requires: /usr/bin/env [ 56s] Processing files: x2gobroker-loadchecker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64 [ 56s] Provides: config(x2gobroker-loadchecker) = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler x2gobroker-loadchecker = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler x2gobroker-loadchecker(x86-64) = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler [ 56s] Requires(interp): /bin/sh /bin/sh /bin/sh /bin/sh /bin/sh [ 56s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 56s] Requires(verify): /bin/sh [ 56s] Requires(pre): /bin/sh permissions python3-x2gobroker = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler [ 56s] Requires(post): /bin/sh [ 56s] Requires(preun): /bin/sh [ 56s] Requires(postun): /bin/sh [ 56s] Requires: /usr/bin/env [ 56s] Processing files: x2gobroker-daemon-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64 [ 56s] Provides: config(x2gobroker-daemon) = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler x2gobroker-daemon = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler x2gobroker-daemon(x86-64) = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler [ 56s] Requires(interp): /bin/sh /bin/sh /bin/sh /bin/sh /bin/sh [ 56s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 56s] Requires(verify): /bin/sh [ 56s] Requires(pre): /bin/sh permissions [ 56s] Requires(post): /bin/sh [ 56s] Requires(preun): /bin/sh [ 56s] Requires(postun): /bin/sh [ 56s] Requires: /bin/bash [ 56s] Processing files: x2gobroker-ssh-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64 [ 56s] Provides: x2gobroker-ssh = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler x2gobroker-ssh(x86-64) = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler [ 56s] Requires(interp): /bin/sh /bin/sh [ 56s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 56s] Requires(verify): /bin/sh [ 56s] Requires(pre): permissions [ 56s] Requires(post): /bin/sh [ 56s] Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.2.5)(64bit) [ 56s] Processing files: x2gobroker-wsgi-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64 [ 56s] Provides: config(x2gobroker-wsgi) = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler x2gobroker-wsgi = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler x2gobroker-wsgi(x86-64) = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler [ 56s] Requires(interp): /bin/sh /bin/sh [ 56s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 56s] Requires(verify): /bin/sh [ 56s] Requires(pre): permissions [ 56s] Requires(post): /bin/sh [ 56s] Processing files: x2gobroker-agent-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64 [ 57s] Provides: x2gobroker-agent = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler x2gobroker-agent(x86-64) = 0.0.4.0-0.0x2go1.0.git20180617.1113.heuler [ 57s] Requires(interp): /bin/sh /bin/sh /bin/sh [ 57s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 57s] Requires(verify): /bin/sh [ 57s] Requires(pre): /bin/sh permissions [ 57s] Requires(post): /bin/sh [ 57s] Requires: /usr/bin/env /usr/bin/perl libc.so.6()(64bit) libc.so.6(GLIBC_2.2.5)(64bit) [ 57s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64 [ 57s] error: Installed (but unpackaged) file(s) found: [ 57s] /usr/lib/debug/.dwz/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64 [ 57s] /usr/lib/debug/usr/bin/x2gobroker-ssh-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64.debug [ 57s] /usr/lib/debug/usr/lib/x2go/x2gobroker-agent-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64.debug [ 57s] [ 57s] [ 57s] RPM build errors: [ 57s] Installed (but unpackaged) file(s) found: [ 57s] /usr/lib/debug/.dwz/x2gobroker-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64 [ 57s] /usr/lib/debug/usr/bin/x2gobroker-ssh-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64.debug [ 57s] /usr/lib/debug/usr/lib/x2go/x2gobroker-agent-0.0.4.0-0.0x2go1.0.git20180617.1113.heuler.x86_64.debug [ 57s] [ 57s] japsand failed "build x2gobroker.spec" at Sun Jun 17 04:51:40 UTC 2018. [ 57s] + exit 1 + cleanup + '[' -n '' ']' + '[' -n '' ']' + echo 'Warning: mock temporary config directory not defined. Skipping cleanup.' Warning: mock temporary config directory not defined. Skipping cleanup. + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.rfDwVllvfDCKqBP79K2eVfw0 ']' + '[' -d /var/lib/jenkins/tmp/tmp.rfDwVllvfDCKqBP79K2eVfw0 ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.rfDwVllvfDCKqBP79K2eVfw0 Build step 'Execute shell' marked build as failure

1 14

Build failed in Jenkins: pyhoca-cli+nightly+epel-7 #28
by jenkins＠x2go.org 10 Nov '18

10 Nov '18

See <http://jenkins.x2go.org:8080/job/pyhoca-cli+nightly+epel-7/28/display/redir…> Changes: [mike.gabriel] Port to Python3. [mike.gabriel] debian/{control,compat}: Bump to DH version level 9. [mike.gabriel] debian/control: Bump versioned D (pyhoca-cli): python-x2go (>= [mike.gabriel] debian/control: White-space fix. [mike.gabriel] debian/control: Switch to python3-* dependencies. [mike.gabriel] debian/control: Fix src:pkg header part. [mike.gabriel] debian/rules: Build for Python3, not Python2. [mike.gabriel] Bump upstream version to 0.5.99.0. [mike.gabriel] debian/changelog: Update from Git history [mike.gabriel] pyhoca-cli.spec: Adapt to PyHoca-CLI's Python3 port. ------------------------------------------ [...truncated 111.31 KB...] + '[' 1 -eq 1 ']' + [[ enabled=0 =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo enabled=0 + read line + [[ mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=testing-epel7&a… =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=testing-epel7&a… =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo 'mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=testing-epel7&a…' + read line + [[ failovermethod=priority =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ failovermethod=priority =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo failovermethod=priority + read line + [[ '' =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ '' =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo '' + read line + [[ '' =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ '' =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo '' + read line + [[ [local] =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ [local] =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo '[local]' + read line + [[ name=local =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ name=local =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo name=local + read line + [[ baseurl=https://kojipkgs.fedoraproject.org/repos/epel7-build/latest/x86_64/ =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ baseurl=https://kojipkgs.fedoraproject.org/repos/epel7-build/latest/x86_64/ =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo baseurl=https://kojipkgs.fedoraproject.org/repos/epel7-build/latest/x86_64/ + read line + [[ cost=2000 =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ cost=2000 =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo cost=2000 + read line + [[ enabled=0 =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ enabled=0 =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo enabled=0 + read line + [[ '' =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ '' =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo '' + read line + [[ [epel-debuginfo] =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ [epel-debuginfo] =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo '[epel-debuginfo]' + read line + [[ name=epel-debug =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ name=epel-debug =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo name=epel-debug + read line + [[ mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=epel-debug-7&ar… =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=epel-debug-7&ar… =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo 'mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=epel-debug-7&ar…' + read line + [[ failovermethod=priority =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ failovermethod=priority =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo failovermethod=priority + read line + [[ enabled=0 =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ enabled=0 =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo enabled=0 + read line + [[ """ =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ """ =~ ^[[:space:]]*"""[[:space:]]*$ ]] + printf '\n' + typeset -i i=0 + (( i = 0 )) + (( i < 8 )) + echo '[x2go-extras-epel]' + (( ++i )) + (( i < 8 )) + echo 'name=Upstream X2Go EPEL Packages (Extra Packages)' + (( ++i )) + (( i < 8 )) + echo baseurl=http://packages.x2go.org/epel/7/extras/x86_64 + (( ++i )) + (( i < 8 )) + echo gpgcheck=0 + (( ++i )) + (( i < 8 )) + echo gpgkey=http://packages.x2go.org/pub.key + (( ++i )) + (( i < 8 )) + echo enabled=1 + (( ++i )) + (( i < 8 )) + echo protect=0 + (( ++i )) + (( i < 8 )) + echo '' + (( ++i )) + (( i < 8 )) + '[' full = full ']' + printf '\n' + typeset -i i=0 + (( i = 0 )) + (( i < 8 )) + echo '[x2go-nightly-epel]' + (( ++i )) + (( i < 8 )) + echo 'name=Upstream X2Go EPEL Packages (Nightly Builds)' + (( ++i )) + (( i < 8 )) + echo baseurl=http://packages.x2go.org/epel/7/heuler/x86_64 + (( ++i )) + (( i < 8 )) + echo gpgcheck=0 + (( ++i )) + (( i < 8 )) + echo gpgkey=http://packages.x2go.org/pub.key + (( ++i )) + (( i < 8 )) + echo enabled=1 + (( ++i )) + (( i < 8 )) + echo protect=0 + (( ++i )) + (( i < 8 )) + echo '' + (( ++i )) + (( i < 8 )) + echo '"""' + read line + IFS=' ' + cache_mock_config + typeset tmp_mock_config=/var/lib/jenkins/tmp/x2go-mock-rFKDNB3cH2D4oKsvl581ek12/epel-7-x86_64-x2go-nightly-full.rxmEiNDnlCRnpf5MfWxY5nbn.cfg + typeset 'tmp_regex=^.*\.cfg$' + [[ ! /var/lib/jenkins/tmp/x2go-mock-rFKDNB3cH2D4oKsvl581ek12/epel-7-x86_64-x2go-nightly-full.rxmEiNDnlCRnpf5MfWxY5nbn.cfg =~ ^.*\.cfg$ ]] + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-rFKDNB3cH2D4oKsvl581ek12/epel-7-x86_64-x2go-nightly-full.rxmEiNDnlCRnpf5MfWxY5nbn.cfg ']' + '[' '!' -r /var/lib/jenkins/tmp/x2go-mock-rFKDNB3cH2D4oKsvl581ek12/epel-7-x86_64-x2go-nightly-full.rxmEiNDnlCRnpf5MfWxY5nbn.cfg ']' ++ basename -s .cfg /var/lib/jenkins/tmp/x2go-mock-rFKDNB3cH2D4oKsvl581ek12/epel-7-x86_64-x2go-nightly-full.rxmEiNDnlCRnpf5MfWxY5nbn.cfg + typeset mock_cache_file_name=epel-7-x86_64-x2go-nightly-full.rxmEiNDnlCRnpf5MfWxY5nbn + typeset tmp=epel-7-x86_64-x2go-nightly-full.rxmEiNDnlCRnpf5MfWxY5nbn + mock_cache_file_name=epel-7-x86_64-x2go-nightly-full + '[' epel-7-x86_64-x2go-nightly-full = epel-7-x86_64-x2go-nightly-full.rxmEiNDnlCRnpf5MfWxY5nbn ']' + mock_cache_file_name=epel-7-x86_64-x2go-nightly-full.cfg + typeset mock_cache_file_path=/var/lib/jenkins/mock-cache//epel-7-x86_64-x2go-nightly-full.cfg + '[' -f /var/lib/jenkins/mock-cache//epel-7-x86_64-x2go-nightly-full.cfg ']' + '[' -r /var/lib/jenkins/mock-cache//epel-7-x86_64-x2go-nightly-full.cfg ']' + cmp -s /var/lib/jenkins/tmp/x2go-mock-rFKDNB3cH2D4oKsvl581ek12/epel-7-x86_64-x2go-nightly-full.rxmEiNDnlCRnpf5MfWxY5nbn.cfg /var/lib/jenkins/mock-cache//epel-7-x86_64-x2go-nightly-full.cfg + echo 'Cached mock config file matches generated one, using the cached file.' Cached mock config file matches generated one, using the cached file. + TMP_MOCK_CFG_FILE=/var/lib/jenkins/mock-cache//epel-7-x86_64-x2go-nightly-full.cfg + return 0 + return 0 + MOCK_CHROOT_CONFIG='-r /var/lib/jenkins/mock-cache//epel-7-x86_64-x2go-nightly-full' + '[' 0 -eq 0 ']' + MOCK_CHROOT_CONFIG='-r /var/lib/jenkins/mock-cache//epel-7-x86_64-x2go-nightly-full.cfg' + return 0 + find /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/epel/7/SRPM/ -type f -iname 'pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.*.src.rpm' -print0 + read -r -d '' srpm + mock -r /var/lib/jenkins/mock-cache//epel-7-x86_64-x2go-nightly-full.cfg --resultdir=/var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/epel/7/x86_64 /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/epel/7/SRPM/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.el7.centos.src.rpm INFO: mock.py version 1.3.2-2 starting (python version = 3.5.3)... Start: init plugins INFO: selinux disabled Finish: init plugins Start: run INFO: Start(/var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/epel/7/SRPM/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.el7.centos.src.rpm) Config(epel-7-x86_64) Start: clean chroot Finish: clean chroot Start: chroot init INFO: calling preinit hooks INFO: enabled root cache Start: unpacking root cache Finish: unpacking root cache INFO: enabled yum cache Start: cleaning yum metadata Finish: cleaning yum metadata Mock Version: 1.3.2-2 INFO: Mock Version: 1.3.2-2 Start: yum update Finish: yum update Finish: chroot init Start: build phase for pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.el7.centos.src.rpm Start: build setup for pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.el7.centos.src.rpm ERROR: Exception(/var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/epel/7/SRPM/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.el7.centos.src.rpm) Config(epel-7-x86_64) 0 minutes 5 seconds INFO: Results and/or logs in: /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/epel/7/x86_64 INFO: Cleaning up build root ('cleanup_on_failure=True') Start: clean chroot Finish: clean chroot ERROR: Command failed: # /usr/bin/yum-builddep --installroot /var/lib/mock/epel-7-x86_64/root/ --releasever 7 /var/lib/mock/epel-7-x86_64/root//builddir/build/SRPMS/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.el7.centos.src.rpm Getting requirements for pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.el7.centos.src Error: No Package found for python3-devel + cat /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/epel/7/x86_64/build.log Mock Version: 1.3.2-2 ENTER ['do'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/pyhoca-cli.spec'], chrootPath='/var/lib/mock/epel-7-x86_64/root'user='mockbuild'env={'PS1': '<mock-chroot> \\s-\\v\\$ ', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'en_US.UTF-8', 'TERM': 'vt100', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"'}shell=FalseprintOutput=Falsegid=999uid=106timeout=0logger=<mockbuild.trace_decorator.getLog object at 0x7f52f129b668>) Executing command: ['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/pyhoca-cli.spec'] with env {'PS1': '<mock-chroot> \\s-\\v\\$ ', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'en_US.UTF-8', 'TERM': 'vt100', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"'} and shell False Building target platforms: x86_64 Building for target x86_64 Wrote: /builddir/build/SRPMS/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.el7.centos.src.rpm Child return code was: 0 + exit 1 + cleanup + '[' -n /var/lib/jenkins/tmp/x2go-mock-rFKDNB3cH2D4oKsvl581ek12 ']' + '[' -e /var/lib/jenkins/tmp/x2go-mock-rFKDNB3cH2D4oKsvl581ek12 ']' + case "${TMP_MOCK_CFG_DIR}" in + typeset file= + for file in "${TMP_MOCK_CFG_DIR}/"* + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-rFKDNB3cH2D4oKsvl581ek12/epel-7-x86_64-x2go-nightly-full.13XrSSCKav8z0QsQsGDh1AU5.cfg ']' + rm -- /var/lib/jenkins/tmp/x2go-mock-rFKDNB3cH2D4oKsvl581ek12/epel-7-x86_64-x2go-nightly-full.13XrSSCKav8z0QsQsGDh1AU5.cfg + for file in "${TMP_MOCK_CFG_DIR}/"* + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-rFKDNB3cH2D4oKsvl581ek12/epel-7-x86_64-x2go-nightly-full.rxmEiNDnlCRnpf5MfWxY5nbn.cfg ']' + rm -- /var/lib/jenkins/tmp/x2go-mock-rFKDNB3cH2D4oKsvl581ek12/epel-7-x86_64-x2go-nightly-full.rxmEiNDnlCRnpf5MfWxY5nbn.cfg + '[' -e /var/lib/jenkins/tmp/x2go-mock-rFKDNB3cH2D4oKsvl581ek12 ']' + '[' -d /var/lib/jenkins/tmp/x2go-mock-rFKDNB3cH2D4oKsvl581ek12 ']' + rmdir -- /var/lib/jenkins/tmp/x2go-mock-rFKDNB3cH2D4oKsvl581ek12 + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.yUnOgVgLX25a469NNY0dbKRC ']' + '[' -d /var/lib/jenkins/tmp/tmp.yUnOgVgLX25a469NNY0dbKRC ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.yUnOgVgLX25a469NNY0dbKRC Build step 'Execute shell' marked build as failure

1 25

Build failed in Jenkins: pyhoca-cli+nightly+epel-6 #33
by jenkins＠x2go.org 10 Nov '18

10 Nov '18

See <http://jenkins.x2go.org:8080/job/pyhoca-cli+nightly+epel-6/33/display/redir…> Changes: [mike.gabriel] Port to Python3. [mike.gabriel] debian/{control,compat}: Bump to DH version level 9. [mike.gabriel] debian/control: Bump versioned D (pyhoca-cli): python-x2go (>= [mike.gabriel] debian/control: White-space fix. [mike.gabriel] debian/control: Switch to python3-* dependencies. [mike.gabriel] debian/control: Fix src:pkg header part. [mike.gabriel] debian/rules: Build for Python3, not Python2. [mike.gabriel] Bump upstream version to 0.5.99.0. [mike.gabriel] debian/changelog: Update from Git history [mike.gabriel] pyhoca-cli.spec: Adapt to PyHoca-CLI's Python3 port. ------------------------------------------ [...truncated 108.59 KB...] + '[' 1 -eq 1 ']' + [[ name=epel-testing =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo name=epel-testing + read line + [[ enabled=0 =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ enabled=0 =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo enabled=0 + read line + [[ mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=testing-epel6&a… =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=testing-epel6&a… =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo 'mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=testing-epel6&a…' + read line + [[ failovermethod=priority =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ failovermethod=priority =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo failovermethod=priority + read line + [[ '' =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ '' =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo '' + read line + [[ [local] =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ [local] =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo '[local]' + read line + [[ name=local =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ name=local =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo name=local + read line + [[ baseurl=https://kojipkgs.fedoraproject.org/repos/dist-6E-epel-build/latest/… =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ baseurl=https://kojipkgs.fedoraproject.org/repos/dist-6E-epel-build/latest/… =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo baseurl=https://kojipkgs.fedoraproject.org/repos/dist-6E-epel-build/latest/… + read line + [[ cost=2000 =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ cost=2000 =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo cost=2000 + read line + [[ enabled=0 =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ enabled=0 =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo enabled=0 + read line + [[ '' =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ '' =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo '' + read line + [[ [epel-debuginfo] =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ [epel-debuginfo] =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo '[epel-debuginfo]' + read line + [[ name=epel-debug =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ name=epel-debug =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo name=epel-debug + read line + [[ mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=epel-debug-6&ar… =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=epel-debug-6&ar… =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo 'mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=epel-debug-6&ar…' + read line + [[ failovermethod=priority =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ failovermethod=priority =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo failovermethod=priority + read line + [[ enabled=0 =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ enabled=0 =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo enabled=0 + read line + [[ """ =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ """ =~ ^[[:space:]]*"""[[:space:]]*$ ]] + printf '\n' + typeset -i i=0 + (( i = 0 )) + (( i < 8 )) + echo '[x2go-extras-epel]' + (( ++i )) + (( i < 8 )) + echo 'name=Upstream X2Go EPEL Packages (Extra Packages)' + (( ++i )) + (( i < 8 )) + echo baseurl=http://packages.x2go.org/epel/6/extras/x86_64 + (( ++i )) + (( i < 8 )) + echo gpgcheck=0 + (( ++i )) + (( i < 8 )) + echo gpgkey=http://packages.x2go.org/pub.key + (( ++i )) + (( i < 8 )) + echo enabled=1 + (( ++i )) + (( i < 8 )) + echo protect=0 + (( ++i )) + (( i < 8 )) + echo '' + (( ++i )) + (( i < 8 )) + '[' full = full ']' + printf '\n' + typeset -i i=0 + (( i = 0 )) + (( i < 8 )) + echo '[x2go-nightly-epel]' + (( ++i )) + (( i < 8 )) + echo 'name=Upstream X2Go EPEL Packages (Nightly Builds)' + (( ++i )) + (( i < 8 )) + echo baseurl=http://packages.x2go.org/epel/6/heuler/x86_64 + (( ++i )) + (( i < 8 )) + echo gpgcheck=0 + (( ++i )) + (( i < 8 )) + echo gpgkey=http://packages.x2go.org/pub.key + (( ++i )) + (( i < 8 )) + echo enabled=1 + (( ++i )) + (( i < 8 )) + echo protect=0 + (( ++i )) + (( i < 8 )) + echo '' + (( ++i )) + (( i < 8 )) + echo '"""' + read line + IFS=' ' + cache_mock_config + typeset tmp_mock_config=/var/lib/jenkins/tmp/x2go-mock-C0XHGPccxSVYHce2d3yOBH2t/epel-6-x86_64-x2go-nightly-full.nbOPN5psZnQtNt9xvdrAl72E.cfg + typeset 'tmp_regex=^.*\.cfg$' + [[ ! /var/lib/jenkins/tmp/x2go-mock-C0XHGPccxSVYHce2d3yOBH2t/epel-6-x86_64-x2go-nightly-full.nbOPN5psZnQtNt9xvdrAl72E.cfg =~ ^.*\.cfg$ ]] + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-C0XHGPccxSVYHce2d3yOBH2t/epel-6-x86_64-x2go-nightly-full.nbOPN5psZnQtNt9xvdrAl72E.cfg ']' + '[' '!' -r /var/lib/jenkins/tmp/x2go-mock-C0XHGPccxSVYHce2d3yOBH2t/epel-6-x86_64-x2go-nightly-full.nbOPN5psZnQtNt9xvdrAl72E.cfg ']' ++ basename -s .cfg /var/lib/jenkins/tmp/x2go-mock-C0XHGPccxSVYHce2d3yOBH2t/epel-6-x86_64-x2go-nightly-full.nbOPN5psZnQtNt9xvdrAl72E.cfg + typeset mock_cache_file_name=epel-6-x86_64-x2go-nightly-full.nbOPN5psZnQtNt9xvdrAl72E + typeset tmp=epel-6-x86_64-x2go-nightly-full.nbOPN5psZnQtNt9xvdrAl72E + mock_cache_file_name=epel-6-x86_64-x2go-nightly-full + '[' epel-6-x86_64-x2go-nightly-full = epel-6-x86_64-x2go-nightly-full.nbOPN5psZnQtNt9xvdrAl72E ']' + mock_cache_file_name=epel-6-x86_64-x2go-nightly-full.cfg + typeset mock_cache_file_path=/var/lib/jenkins/mock-cache//epel-6-x86_64-x2go-nightly-full.cfg + '[' -f /var/lib/jenkins/mock-cache//epel-6-x86_64-x2go-nightly-full.cfg ']' + '[' -r /var/lib/jenkins/mock-cache//epel-6-x86_64-x2go-nightly-full.cfg ']' + cmp -s /var/lib/jenkins/tmp/x2go-mock-C0XHGPccxSVYHce2d3yOBH2t/epel-6-x86_64-x2go-nightly-full.nbOPN5psZnQtNt9xvdrAl72E.cfg /var/lib/jenkins/mock-cache//epel-6-x86_64-x2go-nightly-full.cfg + echo 'Cached mock config file matches generated one, using the cached file.' Cached mock config file matches generated one, using the cached file. + TMP_MOCK_CFG_FILE=/var/lib/jenkins/mock-cache//epel-6-x86_64-x2go-nightly-full.cfg + return 0 + return 0 + MOCK_CHROOT_CONFIG='-r /var/lib/jenkins/mock-cache//epel-6-x86_64-x2go-nightly-full' + '[' 0 -eq 0 ']' + MOCK_CHROOT_CONFIG='-r /var/lib/jenkins/mock-cache//epel-6-x86_64-x2go-nightly-full.cfg' + return 0 + find /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/epel/6/SRPM/ -type f -iname 'pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.*.src.rpm' -print0 + read -r -d '' srpm + mock -r /var/lib/jenkins/mock-cache//epel-6-x86_64-x2go-nightly-full.cfg --resultdir=/var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/epel/6/x86_64 /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/epel/6/SRPM/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.el6.src.rpm INFO: mock.py version 1.3.2-2 starting (python version = 3.5.3)... Start: init plugins INFO: selinux disabled Finish: init plugins Start: run INFO: Start(/var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/epel/6/SRPM/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.el6.src.rpm) Config(epel-6-x86_64) Start: clean chroot Finish: clean chroot Start: chroot init INFO: calling preinit hooks INFO: enabled root cache Start: unpacking root cache Finish: unpacking root cache INFO: enabled yum cache Start: cleaning yum metadata Finish: cleaning yum metadata Mock Version: 1.3.2-2 INFO: Mock Version: 1.3.2-2 Start: yum update Finish: yum update Finish: chroot init Start: build phase for pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.el6.src.rpm Start: build setup for pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.el6.src.rpm ERROR: Exception(/var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/epel/6/SRPM/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.el6.src.rpm) Config(epel-6-x86_64) 0 minutes 5 seconds INFO: Results and/or logs in: /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/epel/6/x86_64 INFO: Cleaning up build root ('cleanup_on_failure=True') Start: clean chroot Finish: clean chroot ERROR: Command failed: # /usr/bin/yum-builddep --installroot /var/lib/mock/epel-6-x86_64/root/ --releasever 6 /var/lib/mock/epel-6-x86_64/root//builddir/build/SRPMS/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.el6.src.rpm Getting requirements for pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.el6.src Error: No Package found for python3-devel + cat /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/epel/6/x86_64/build.log Mock Version: 1.3.2-2 ENTER ['do'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/pyhoca-cli.spec'], printOutput=Falselogger=<mockbuild.trace_decorator.getLog object at 0x7f92de762668>gid=999shell=Falseuid=106timeout=0user='mockbuild'env={'HOME': '/builddir', 'SHELL': '/bin/bash', 'LANG': 'en_US.UTF-8', 'TERM': 'vt100', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'PS1': '<mock-chroot> \\s-\\v\\$ ', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}chrootPath='/var/lib/mock/epel-6-x86_64/root') Executing command: ['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/pyhoca-cli.spec'] with env {'HOME': '/builddir', 'SHELL': '/bin/bash', 'LANG': 'en_US.UTF-8', 'TERM': 'vt100', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'PS1': '<mock-chroot> \\s-\\v\\$ ', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'} and shell False Building target platforms: x86_64 Building for target x86_64 Wrote: /builddir/build/SRPMS/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.el6.src.rpm Child return code was: 0 + exit 1 + cleanup + '[' -n /var/lib/jenkins/tmp/x2go-mock-C0XHGPccxSVYHce2d3yOBH2t ']' + '[' -e /var/lib/jenkins/tmp/x2go-mock-C0XHGPccxSVYHce2d3yOBH2t ']' + case "${TMP_MOCK_CFG_DIR}" in + typeset file= + for file in "${TMP_MOCK_CFG_DIR}/"* + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-C0XHGPccxSVYHce2d3yOBH2t/epel-6-x86_64-x2go-nightly-full.aaIpRxEwPILcRmDDzLBJWbMj.cfg ']' + rm -- /var/lib/jenkins/tmp/x2go-mock-C0XHGPccxSVYHce2d3yOBH2t/epel-6-x86_64-x2go-nightly-full.aaIpRxEwPILcRmDDzLBJWbMj.cfg + for file in "${TMP_MOCK_CFG_DIR}/"* + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-C0XHGPccxSVYHce2d3yOBH2t/epel-6-x86_64-x2go-nightly-full.nbOPN5psZnQtNt9xvdrAl72E.cfg ']' + rm -- /var/lib/jenkins/tmp/x2go-mock-C0XHGPccxSVYHce2d3yOBH2t/epel-6-x86_64-x2go-nightly-full.nbOPN5psZnQtNt9xvdrAl72E.cfg + '[' -e /var/lib/jenkins/tmp/x2go-mock-C0XHGPccxSVYHce2d3yOBH2t ']' + '[' -d /var/lib/jenkins/tmp/x2go-mock-C0XHGPccxSVYHce2d3yOBH2t ']' + rmdir -- /var/lib/jenkins/tmp/x2go-mock-C0XHGPccxSVYHce2d3yOBH2t + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.2EJMsbsPUCmkiGKKXKqyvgxk ']' + '[' -d /var/lib/jenkins/tmp/tmp.2EJMsbsPUCmkiGKKXKqyvgxk ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.2EJMsbsPUCmkiGKKXKqyvgxk Build step 'Execute shell' marked build as failure

1 27

Build failed in Jenkins: pyhoca-cli+nightly+opensuse-42.3 #4
by jenkins＠x2go.org 10 Nov '18

10 Nov '18

See <http://jenkins.x2go.org:8080/job/pyhoca-cli+nightly+opensuse-42.3/4/display…> Changes: [mike.gabriel] Port to Python3. [mike.gabriel] debian/{control,compat}: Bump to DH version level 9. [mike.gabriel] debian/control: Bump versioned D (pyhoca-cli): python-x2go (>= [mike.gabriel] debian/control: White-space fix. [mike.gabriel] debian/control: Switch to python3-* dependencies. [mike.gabriel] debian/control: Fix src:pkg header part. [mike.gabriel] debian/rules: Build for Python3, not Python2. [mike.gabriel] Bump upstream version to 0.5.99.0. [mike.gabriel] debian/changelog: Update from Git history [mike.gabriel] pyhoca-cli.spec: Adapt to PyHoca-CLI's Python3 port. ------------------------------------------ [...truncated 43.84 KB...] [ 24s] [46/106] cumulate libtsan0-7.1.1+r248970-1.4 [ 24s] [47/106] cumulate libmagic1-5.19-8.15 [ 24s] [48/106] cumulate libzio1-1.00-14.15 [ 24s] [49/106] cumulate file-5.19-8.15 [ 24s] [50/106] cumulate libcloog-isl4-0.18.1-6.15 [ 24s] [51/106] cumulate libdb-4_8-4.8.30-33.16 [ 24s] [52/106] cumulate libfdisk1-2.29.2-3.4 [ 24s] [53/106] cumulate libmount1-2.29.2-3.4 [ 24s] [54/106] cumulate libmpc3-1.0.2-6.16 [ 24s] [55/106] cumulate libncurses5-5.9-57.1 [ 24s] [56/106] cumulate libncurses6-5.9-57.1 [ 25s] [57/106] cumulate libsemanage1-2.5-5.2 [ 25s] [58/106] cumulate libreadline6-6.3-82.6 [ 25s] [59/106] cumulate ncurses-utils-5.9-57.1 [ 25s] [60/106] cumulate perl-5.18.2-7.15 [ 25s] [61/106] cumulate cpp48-4.8.5-24.18 [ 25s] [62/106] cumulate brp-check-suse-13.2+git20150217.031533d-6.3 [ 25s] [63/106] cumulate bash-4.3-82.6 [ 25s] [64/106] cumulate cpp-4.8-11.16 [ 25s] [65/106] cumulate bzip2-1.0.6-34.15 [ 25s] [66/106] cumulate xz-5.2.2-3.15 [ 25s] [67/106] cumulate info-4.13a-42.18 [ 25s] [68/106] cumulate python3-base-3.4.6-11.1 [ 25s] [69/106] cumulate cpio-2.11-37.12 [ 25s] [70/106] cumulate diffutils-3.3-10.3 [ 25s] [71/106] cumulate gzip-1.6-12.15 [ 26s] [72/106] cumulate m4-1.4.16-6.3 [ 26s] [73/106] cumulate make-4.0-7.15 [ 26s] [74/106] cumulate sed-4.2.2-9.3 [ 26s] [75/106] cumulate which-2.20-8.16 [ 26s] [76/106] cumulate findutils-4.5.12-13.15 [ 26s] [77/106] cumulate gettext-runtime-mini-0.19.2-6.15 [ 26s] [78/106] cumulate grep-2.16-7.3 [ 26s] [79/106] cumulate python3-devel-3.4.6-11.1 [ 26s] [80/106] cumulate tar-1.27.1-14.3 [ 26s] [81/106] cumulate python3-3.4.6-11.1 [ 26s] [82/106] cumulate coreutils-8.25-3.3 [ 26s] [83/106] cumulate systemd-rpm-macros-3-4.14 [ 26s] [84/106] cumulate linux-glibc-devel-4.4-5.4 [ 26s] [85/106] cumulate glibc-locale-2.22-8.4 [ 26s] [86/106] cumulate update-alternatives-1.18.4-4.15 [ 27s] [87/106] cumulate gettext-tools-mini-0.19.2-6.15 [ 27s] [88/106] cumulate permissions-2015.09.28.1626-14.3 [ 27s] [89/106] cumulate rpm-4.11.2-13.7 [ 27s] [90/106] cumulate glibc-devel-2.22-8.4 [ 27s] [91/106] cumulate libutempter0-1.1.6-9.16 [ 27s] [92/106] cumulate binutils-2.26.1-11.1 [ 27s] [93/106] cumulate gawk-4.1.3-7.15 [ 27s] [94/106] cumulate python3-setuptools-18.3.2-4.4 [ 27s] [95/106] cumulate rpmlint-mini-1.8-5.6 [ 27s] [96/106] cumulate rpmlint-Factory-1.0-92.3 [ 27s] [97/106] cumulate gcc48-4.8.5-24.18 [ 27s] [98/106] cumulate gcc-4.8-11.16 [ 27s] [99/106] cumulate libcrack2-2.9.0-9.15 [ 27s] [100/106] cumulate cracklib-2.9.0-9.15 [ 28s] [101/106] cumulate pam-1.3.0-3.15 [ 28s] [102/106] cumulate util-linux-2.29.2-3.4 [ 28s] [103/106] cumulate aaa_base-13.2+git20140911.61c1681-27.2 [ 28s] [104/106] cumulate rpm-build-4.11.2-13.7 [ 28s] [105/106] cumulate aaa_base-malloccheck-13.2+git20140911.61c1681-27.2 [ 28s] [106/106] cumulate post-build-checks-13.2+git20160512.be9650e-3.3 [ 28s] now installing cumulated packages [ 28s] warning: .init_b_cache/file-magic.rpm: Header V3 RSA/SHA256 Signature, key ID 3dbdc284: NOKEY [ 28s] Preparing... ######################################## [ 28s] Updating / installing... [ 28s] terminfo-base-5.9-57.1 ######################################## [ 28s] filesystem-13.1-9.5 ######################################## [ 28s] glibc-2.22-8.4 ######################################## [ 28s] libz1-1.2.8-13.15 ######################################## [ 28s] perl-base-5.18.2-7.15 ######################################## [ 28s] libbz2-1-1.0.6-34.15 ######################################## [ 28s] libgcc_s1-7.1.1+r248970-1.4 ######################################## [ 28s] libgmp10-5.1.3-7.15 ######################################## [ 29s] libstdc++6-7.1.1+r248970-1.4 ######################################## [ 29s] libncurses5-5.9-57.1 ######################################## [ 29s] fillup-1.42-275.3 ######################################## [ 29s] liblzma5-5.2.2-3.15 ######################################## [ 29s] libreadline6-6.3-82.6 ######################################## [ 29s] bash-4.3-82.6 ######################################## [ 29s] libisl10-0.12.2-6.15 ######################################## [ 29s] libmpfr4-3.1.2-13.15 ######################################## [ 29s] libattr1-2.4.47-8.15 ######################################## [ 29s] libacl1-2.2.52-10.15 ######################################## [ 29s] libaudit1-2.3.6-6.15 ######################################## [ 29s] libcap2-2.22-18.16 ######################################## [ 29s] libpython3_4m1_0-3.4.6-11.1 ######################################## [ 29s] python3-base-3.4.6-11.1 ######################################## [ 29s] libuuid1-2.29.2-3.4 ######################################## [ 29s] libblkid1-2.29.2-3.4 ######################################## [ 29s] libmpc3-1.0.2-6.16 ######################################## [ 29s] libcloog-isl4-0.18.1-6.15 ######################################## [ 30s] cpp48-4.8.5-24.18 ######################################## [ 30s] libncurses6-5.9-57.1 ######################################## [ 30s] libgomp1-7.1.1+r248970-1.4 ######################################## [ 30s] libpcre1-8.39-9.15 ######################################## [ 30s] libselinux1-2.5-4.17 ######################################## [ 30s] libpopt0-1.16-31.15 ######################################## [ 30s] libmount1-2.29.2-3.4 ######################################## [ 30s] cpp-4.8-11.16 ######################################## [ 30s] libfdisk1-2.29.2-3.4 ######################################## [ 30s] bzip2-1.0.6-34.15 ######################################## [ 30s] xz-5.2.2-3.15 ######################################## [ 30s] libcrack2-2.9.0-9.15 ######################################## [ 30s] cracklib-2.9.0-9.15 ######################################## [ 30s] libzio1-1.00-14.15 ######################################## [ 30s] info-4.13a-42.18 ######################################## [ 30s] coreutils-8.25-3.3 ######################################## [ 30s] diffutils-3.3-10.3 ######################################## [ 30s] grep-2.16-7.3 ######################################## [ 31s] permissions-2015.09.28.1626-14.3 ######################################## [ 31s] Updating /etc/sysconfig/security... [ 31s] Warning: running kernel does not support fscaps [ 31s] Checking permissions and ownerships - using the permissions files [ 31s] /etc/permissions [ 31s] /etc/permissions.easy [ 31s] /etc/permissions.local [ 31s] setting /dev/full to root:root 0666. (wrong permissions 0622) [ 31s] setting /sbin/unix_chkpwd to root:shadow 4755. (wrong owner/group root:root) [ 31s] setting /sbin/unix2_chkpwd to root:shadow 4755. (wrong owner/group root:root) [ 31s] sed-4.2.2-9.3 ######################################## [ 31s] update-alternatives-1.18.4-4.15 ######################################## [ 31s] update-alternatives: error: no alternatives for * [ 31s] cpio-2.11-37.12 ######################################## [ 31s] binutils-2.26.1-11.1 ######################################## [ 31s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode [ 31s] gawk-4.1.3-7.15 ######################################## [ 31s] update-alternatives: using /usr/bin/gawk to provide /bin/awk (awk) in auto mode [ 31s] findutils-4.5.12-13.15 ######################################## [ 32s] libutempter0-1.1.6-9.16 ######################################## [ 32s] Warning: running kernel does not support fscaps [ 32s] pam-1.3.0-3.15 ######################################## [ 32s] Warning: running kernel does not support fscaps [ 32s] Warning: running kernel does not support fscaps [ 32s] systemd-rpm-macros-3-4.14 ######################################## [ 32s] linux-glibc-devel-4.4-5.4 ######################################## [ 32s] glibc-devel-2.22-8.4 ######################################## [ 33s] glibc-locale-2.22-8.4 ######################################## [ 33s] gzip-1.6-12.15 ######################################## [ 33s] make-4.0-7.15 ######################################## [ 33s] which-2.20-8.16 ######################################## [ 33s] gettext-runtime-mini-0.19.2-6.15 ######################################## [ 33s] gettext-tools-mini-0.19.2-6.15 ######################################## [ 33s] tar-1.27.1-14.3 ######################################## [ 33s] ncurses-utils-5.9-57.1 ######################################## [ 33s] libdb-4_8-4.8.30-33.16 ######################################## [ 33s] libasan0-4.8.5-24.18 ######################################## [ 33s] libtsan0-7.1.1+r248970-1.4 ######################################## [ 33s] insserv-compat-0.1-18.2 ######################################## [ 33s] libopenssl1_0_0-1.0.2j-7.3 ######################################## [ 33s] libatomic1-7.1.1+r248970-1.4 ######################################## [ 33s] libcap-ng0-0.7.3-6.15 ######################################## [ 33s] libelf1-0.158-12.15 ######################################## [ 33s] libexpat1-2.1.0-22.15 ######################################## [ 33s] libgdbm4-1.10-6.15 ######################################## [ 34s] perl-5.18.2-7.15 ######################################## [ 34s] libitm1-7.1.1+r248970-1.4 ######################################## [ 35s] gcc48-4.8.5-24.18 ######################################## [ 35s] gcc-4.8-11.16 ######################################## [ 35s] liblua5_1-5.1.5-14.13 ######################################## [ 35s] libsepol1-2.5-3.15 ######################################## [ 35s] libsmartcols1-2.29.2-3.4 ######################################## [ 35s] util-linux-2.29.2-3.4 ######################################## [ 35s] Warning: running kernel does not support fscaps [ 35s] setting /usr/bin/wall to root:tty 2755. (wrong permissions 0755) [ 35s] setting /usr/bin/write to root:tty 2755. (wrong permissions 0755) [ 35s] Warning: running kernel does not support fscaps [ 35s] aaa_base-13.2+git20140911.61c1681-27.2######################################## [ 35s] Updating /etc/sysconfig/language... [ 35s] Updating /etc/sysconfig/backup... [ 36s] Updating /etc/sysconfig/proxy... [ 36s] Updating /etc/sysconfig/windowmanager... [ 36s] Updating /etc/sysconfig/news... [ 36s] Updating etc/passwd...unchanged [ 36s] Updating etc/group...unchanged [ 36s] Updating etc/shadow...unchanged [ 36s] aaa_base-malloccheck-13.2+git20140911.######################################## [ 36s] libsqlite3-0-3.8.10.2-10.2 ######################################## [ 36s] python3-3.4.6-11.1 ######################################## [ 36s] libustr-1_0-1-1.0.4-37.15 ######################################## [ 36s] libsemanage1-2.5-5.2 ######################################## [ 36s] net-tools-1.60-769.15 ######################################## [ 36s] patch-2.7.5-8.15 ######################################## [ 36s] pkg-config-0.28-11.15 ######################################## [ 36s] file-magic-5.19-8.15 ######################################## [ 36s] libmagic1-5.19-8.15 ######################################## [ 36s] rpm-4.11.2-13.7 ######################################## [ 36s] Updating /etc/sysconfig/services... [ 37s] rpmlint-mini-1.8-5.6 ######################################## [ 37s] file-5.19-8.15 ######################################## [ 37s] rpm-build-4.11.2-13.7 ######################################## [ 37s] rpmlint-Factory-1.0-92.3 ######################################## [ 37s] python3-devel-3.4.6-11.1 ######################################## [ 37s] python3-setuptools-18.3.2-4.4 ######################################## [ 37s] update-alternatives: using /usr/bin/easy_install-3.4 to provide /usr/bin/easy_install (easy_install) in auto mode [ 37s] post-build-checks-13.2+git20160512.be9######################################## [ 37s] brp-check-suse-13.2+git20150217.031533######################################## [ 37s] m4-1.4.16-6.3 ######################################## [ 37s] attr-2.4.47-8.15 ######################################## [ 37s] build-mkbaselibs-20170320-3.1 ######################################## [ 37s] fdupes-1.61-10.1 ######################################## [ 37s] removing nis flags from /var/cache/obs-build/opensuse/42.3/x86_64/etc/nsswitch.conf... [ 37s] now finalizing build dir... [ 37s] ----------------------------------------------------------------- [ 37s] ----- building pyhoca-cli.spec (user abuild) [ 37s] ----------------------------------------------------------------- [ 37s] ----------------------------------------------------------------- [ 37s] + exec rpmbuild -bb --define '_srcdefattr (-,root,root)' --nosignature /home/abuild/rpmbuild/SOURCES/pyhoca-cli.spec [ 37s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.8QGBXV [ 37s] + umask 022 [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + rm -rf pyhoca-cli-0.5.99.0 [ 37s] + /usr/bin/gzip -dc /home/abuild/rpmbuild/SOURCES/pyhoca-cli-0.5.99.0.tar.gz [ 37s] + /bin/tar -xf - [ 37s] + STATUS=0 [ 37s] + '[' 0 -ne 0 ']' [ 37s] + cd pyhoca-cli-0.5.99.0 [ 37s] + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 37s] + exit 0 [ 37s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.e5aJ8L [ 37s] + umask 022 [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + /usr/bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.x86_64 [ 37s] ++ dirname /home/abuild/rpmbuild/BUILDROOT/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.x86_64 [ 37s] + /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT [ 37s] + /usr/bin/mkdir /home/abuild/rpmbuild/BUILDROOT/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.x86_64 [ 37s] + cd pyhoca-cli-0.5.99.0 [ 37s] + '%{__python3}' setup.py build [ 37s] /var/tmp/rpm-tmp.e5aJ8L: line 32: fg: no job control [ 37s] error: Bad exit status from /var/tmp/rpm-tmp.e5aJ8L (%build) [ 37s] [ 37s] [ 37s] RPM build errors: [ 37s] Bad exit status from /var/tmp/rpm-tmp.e5aJ8L (%build) [ 37s] [ 37s] japsand failed "build pyhoca-cli.spec" at Mon Sep 25 11:32:29 UTC 2017. [ 37s] + exit 1 + cleanup + '[' -n '' ']' + '[' -n '' ']' + echo 'Warning: mock temporary config directory not defined. Skipping cleanup.' Warning: mock temporary config directory not defined. Skipping cleanup. + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.JYlTW2QAU1KiiQWxz1ykH5iJ ']' + '[' -d /var/lib/jenkins/tmp/tmp.JYlTW2QAU1KiiQWxz1ykH5iJ ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.JYlTW2QAU1KiiQWxz1ykH5iJ Build step 'Execute shell' marked build as failure

1 21

Build failed in Jenkins: pyhoca-cli+nightly+opensuse-42.2 #4
by jenkins＠x2go.org 10 Nov '18

10 Nov '18

See <http://jenkins.x2go.org:8080/job/pyhoca-cli+nightly+opensuse-42.2/4/display…> Changes: [mike.gabriel] Port to Python3. [mike.gabriel] debian/{control,compat}: Bump to DH version level 9. [mike.gabriel] debian/control: Bump versioned D (pyhoca-cli): python-x2go (>= [mike.gabriel] debian/control: White-space fix. [mike.gabriel] debian/control: Switch to python3-* dependencies. [mike.gabriel] debian/control: Fix src:pkg header part. [mike.gabriel] debian/rules: Build for Python3, not Python2. [mike.gabriel] Bump upstream version to 0.5.99.0. [mike.gabriel] debian/changelog: Update from Git history [mike.gabriel] pyhoca-cli.spec: Adapt to PyHoca-CLI's Python3 port. ------------------------------------------ [...truncated 43.80 KB...] [ 22s] [46/106] cumulate libtsan0-5.3.1+r233831-7.1 [ 22s] [47/106] cumulate libmagic1-5.19-6.53 [ 22s] [48/106] cumulate libzio1-1.00-12.57 [ 22s] [49/106] cumulate file-5.19-6.53 [ 22s] [50/106] cumulate libcloog-isl4-0.18.1-4.57 [ 22s] [51/106] cumulate libdb-4_8-4.8.30-31.51 [ 22s] [52/106] cumulate libfdisk1-2.28-5.10 [ 22s] [53/106] cumulate libmount1-2.28-5.10 [ 22s] [54/106] cumulate libmpc3-1.0.2-4.55 [ 22s] [55/106] cumulate libncurses5-5.9-54.48 [ 22s] [56/106] cumulate libncurses6-5.9-54.48 [ 22s] [57/106] cumulate libsemanage1-2.5-1.12 [ 23s] [58/106] cumulate libreadline6-6.3-79.15 [ 23s] [59/106] cumulate ncurses-utils-5.9-54.48 [ 23s] [60/106] cumulate perl-5.18.2-5.6 [ 23s] [61/106] cumulate cpp48-4.8.5-22.1 [ 23s] [62/106] cumulate brp-check-suse-13.2+git20150217.031533d-4.2 [ 23s] [63/106] cumulate bash-4.3-79.15 [ 23s] [64/106] cumulate cpp-4.8-9.61 [ 23s] [65/106] cumulate bzip2-1.0.6-32.53 [ 23s] [66/106] cumulate xz-5.2.2-1.11 [ 23s] [67/106] cumulate info-4.13a-40.52 [ 23s] [68/106] cumulate python3-base-3.4.5-9.1 [ 23s] [69/106] cumulate cpio-2.11-31.51 [ 23s] [70/106] cumulate diffutils-3.3-8.4 [ 25s] [71/106] cumulate gzip-1.6-10.53 [ 25s] [72/106] cumulate m4-1.4.16-4.5 [ 25s] [73/106] cumulate make-4.0-5.54 [ 25s] [74/106] cumulate sed-4.2.2-7.4 [ 25s] [75/106] cumulate which-2.20-6.54 [ 25s] [76/106] cumulate findutils-4.5.12-11.1 [ 25s] [77/106] cumulate gettext-runtime-mini-0.19.2-4.48 [ 25s] [78/106] cumulate grep-2.16-5.5 [ 25s] [79/106] cumulate python3-devel-3.4.5-9.1 [ 26s] [80/106] cumulate tar-1.27.1-6.4 [ 26s] [81/106] cumulate python3-3.4.5-9.1 [ 26s] [82/106] cumulate coreutils-8.25-1.4 [ 26s] [83/106] cumulate systemd-rpm-macros-3-2.16 [ 26s] [84/106] cumulate linux-glibc-devel-4.4-2.15 [ 26s] [85/106] cumulate glibc-locale-2.22-3.7 [ 26s] [86/106] cumulate update-alternatives-1.18.4-2.17 [ 26s] [87/106] cumulate gettext-tools-mini-0.19.2-4.48 [ 26s] [88/106] cumulate permissions-2015.09.28.1626-12.1 [ 26s] [89/106] cumulate rpm-4.11.2-10.1 [ 26s] [90/106] cumulate glibc-devel-2.22-3.7 [ 26s] [91/106] cumulate libutempter0-1.1.6-7.55 [ 26s] [92/106] cumulate binutils-2.26.1-8.1 [ 26s] [93/106] cumulate gawk-4.1.3-5.55 [ 26s] [94/106] cumulate python3-setuptools-18.3.2-2.4 [ 27s] [95/106] cumulate rpmlint-mini-1.8-1.22 [ 27s] [96/106] cumulate rpmlint-Factory-1.0-90.2 [ 27s] [97/106] cumulate gcc48-4.8.5-22.1 [ 27s] [98/106] cumulate gcc-4.8-9.61 [ 27s] [99/106] cumulate libcrack2-2.9.0-7.8 [ 27s] [100/106] cumulate cracklib-2.9.0-7.8 [ 27s] [101/106] cumulate pam-1.3.0-1.9 [ 27s] [102/106] cumulate util-linux-2.28-5.10 [ 27s] [103/106] cumulate aaa_base-13.2+git20140911.61c1681-23.1 [ 27s] [104/106] cumulate rpm-build-4.11.2-10.1 [ 27s] [105/106] cumulate aaa_base-malloccheck-13.2+git20140911.61c1681-23.1 [ 27s] [106/106] cumulate post-build-checks-13.2+git20160512.be9650e-1.3 [ 27s] now installing cumulated packages [ 27s] warning: .init_b_cache/file-magic.rpm: Header V3 RSA/SHA256 Signature, key ID 3dbdc284: NOKEY [ 27s] Preparing... ######################################## [ 27s] Updating / installing... [ 28s] terminfo-base-5.9-54.48 ######################################## [ 28s] filesystem-13.1-7.2 ######################################## [ 28s] glibc-2.22-3.7 ######################################## [ 28s] libz1-1.2.8-8.5 ######################################## [ 28s] libbz2-1-1.0.6-32.53 ######################################## [ 28s] libgcc_s1-5.3.1+r233831-7.1 ######################################## [ 28s] libgmp10-5.1.3-5.46 ######################################## [ 28s] perl-base-5.18.2-5.6 ######################################## [ 28s] libstdc++6-5.3.1+r233831-7.1 ######################################## [ 28s] libncurses5-5.9-54.48 ######################################## [ 28s] fillup-1.42-273.4 ######################################## [ 28s] liblzma5-5.2.2-1.11 ######################################## [ 28s] libreadline6-6.3-79.15 ######################################## [ 28s] bash-4.3-79.15 ######################################## [ 28s] libisl10-0.12.2-4.54 ######################################## [ 28s] libmpfr4-3.1.2-11.53 ######################################## [ 28s] libattr1-2.4.47-6.57 ######################################## [ 28s] libacl1-2.2.52-8.55 ######################################## [ 28s] libaudit1-2.3.6-4.52 ######################################## [ 28s] libcap2-2.22-16.55 ######################################## [ 28s] libpython3_4m1_0-3.4.5-9.1 ######################################## [ 29s] python3-base-3.4.5-9.1 ######################################## [ 29s] libuuid1-2.28-5.10 ######################################## [ 29s] libblkid1-2.28-5.10 ######################################## [ 29s] libmpc3-1.0.2-4.55 ######################################## [ 29s] libcloog-isl4-0.18.1-4.57 ######################################## [ 29s] cpp48-4.8.5-22.1 ######################################## [ 29s] libgomp1-5.3.1+r233831-7.1 ######################################## [ 29s] libpcre1-8.33-4.51 ######################################## [ 29s] libselinux1-2.5-2.12 ######################################## [ 29s] libpopt0-1.16-29.53 ######################################## [ 29s] libmount1-2.28-5.10 ######################################## [ 29s] cpp-4.8-9.61 ######################################## [ 29s] libfdisk1-2.28-5.10 ######################################## [ 29s] bzip2-1.0.6-32.53 ######################################## [ 29s] xz-5.2.2-1.11 ######################################## [ 29s] libcrack2-2.9.0-7.8 ######################################## [ 30s] cracklib-2.9.0-7.8 ######################################## [ 30s] libzio1-1.00-12.57 ######################################## [ 30s] info-4.13a-40.52 ######################################## [ 30s] coreutils-8.25-1.4 ######################################## [ 30s] diffutils-3.3-8.4 ######################################## [ 30s] grep-2.16-5.5 ######################################## [ 30s] permissions-2015.09.28.1626-12.1 ######################################## [ 30s] Updating /etc/sysconfig/security... [ 30s] Warning: running kernel does not support fscaps [ 30s] Checking permissions and ownerships - using the permissions files [ 30s] /etc/permissions [ 30s] /etc/permissions.easy [ 30s] /etc/permissions.local [ 30s] setting /dev/full to root:root 0666. (wrong permissions 0622) [ 30s] setting /sbin/unix_chkpwd to root:shadow 4755. (wrong owner/group root:root) [ 30s] setting /sbin/unix2_chkpwd to root:shadow 4755. (wrong owner/group root:root) [ 30s] sed-4.2.2-7.4 ######################################## [ 30s] update-alternatives-1.18.4-2.17 ######################################## [ 30s] update-alternatives: error: no alternatives for * [ 30s] cpio-2.11-31.51 ######################################## [ 31s] binutils-2.26.1-8.1 ######################################## [ 31s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode [ 31s] gawk-4.1.3-5.55 ######################################## [ 31s] update-alternatives: using /usr/bin/gawk to provide /bin/awk (awk) in auto mode [ 31s] findutils-4.5.12-11.1 ######################################## [ 31s] libutempter0-1.1.6-7.55 ######################################## [ 31s] Warning: running kernel does not support fscaps [ 31s] pam-1.3.0-1.9 ######################################## [ 31s] Warning: running kernel does not support fscaps [ 31s] Warning: running kernel does not support fscaps [ 31s] systemd-rpm-macros-3-2.16 ######################################## [ 31s] linux-glibc-devel-4.4-2.15 ######################################## [ 31s] glibc-devel-2.22-3.7 ######################################## [ 32s] glibc-locale-2.22-3.7 ######################################## [ 32s] gzip-1.6-10.53 ######################################## [ 32s] make-4.0-5.54 ######################################## [ 32s] which-2.20-6.54 ######################################## [ 32s] gettext-runtime-mini-0.19.2-4.48 ######################################## [ 32s] gettext-tools-mini-0.19.2-4.48 ######################################## [ 32s] tar-1.27.1-6.4 ######################################## [ 32s] ncurses-utils-5.9-54.48 ######################################## [ 32s] libdb-4_8-4.8.30-31.51 ######################################## [ 32s] libncurses6-5.9-54.48 ######################################## [ 32s] libasan0-4.8.5-22.1 ######################################## [ 32s] libtsan0-5.3.1+r233831-7.1 ######################################## [ 32s] libopenssl1_0_0-1.0.2j-2.2 ######################################## [ 32s] libatomic1-5.3.1+r233831-7.1 ######################################## [ 33s] libcap-ng0-0.7.3-4.55 ######################################## [ 33s] libelf1-0.158-10.50 ######################################## [ 33s] libexpat1-2.1.0-17.9 ######################################## [ 33s] libgdbm4-1.10-4.52 ######################################## [ 33s] perl-5.18.2-5.6 ######################################## [ 33s] libitm1-5.3.1+r233831-7.1 ######################################## [ 34s] gcc48-4.8.5-22.1 ######################################## [ 34s] gcc-4.8-9.61 ######################################## [ 34s] liblua5_1-5.1.5-12.21 ######################################## [ 34s] libsepol1-2.5-1.14 ######################################## [ 34s] libsmartcols1-2.28-5.10 ######################################## [ 34s] libsqlite3-0-3.8.10.2-7.9 ######################################## [ 34s] python3-3.4.5-9.1 ######################################## [ 34s] libustr-1_0-1-1.0.4-35.50 ######################################## [ 34s] libsemanage1-2.5-1.12 ######################################## [ 34s] net-tools-1.60-767.55 ######################################## [ 34s] patch-2.7.5-6.54 ######################################## [ 34s] pkg-config-0.28-9.54 ######################################## [ 34s] insserv-compat-0.1-15.55 ######################################## [ 34s] util-linux-2.28-5.10 ######################################## [ 34s] Warning: running kernel does not support fscaps [ 34s] setting /usr/bin/wall to root:tty 2755. (wrong permissions 0755) [ 34s] setting /usr/bin/write to root:tty 2755. (wrong permissions 0755) [ 34s] Warning: running kernel does not support fscaps [ 34s] aaa_base-13.2+git20140911.61c1681-23.1######################################## [ 34s] Updating /etc/sysconfig/language... [ 35s] Updating /etc/sysconfig/backup... [ 35s] Updating /etc/sysconfig/proxy... [ 35s] Updating /etc/sysconfig/windowmanager... [ 35s] Updating /etc/sysconfig/news... [ 35s] Updating etc/passwd...unchanged [ 35s] Updating etc/group...unchanged [ 35s] Updating etc/shadow...unchanged [ 35s] aaa_base-malloccheck-13.2+git20140911.######################################## [ 35s] file-magic-5.19-6.53 ######################################## [ 35s] libmagic1-5.19-6.53 ######################################## [ 35s] rpm-4.11.2-10.1 ######################################## [ 35s] Updating /etc/sysconfig/services... [ 36s] rpmlint-mini-1.8-1.22 ######################################## [ 36s] file-5.19-6.53 ######################################## [ 36s] rpm-build-4.11.2-10.1 ######################################## [ 36s] rpmlint-Factory-1.0-90.2 ######################################## [ 36s] post-build-checks-13.2+git20160512.be9######################################## [ 36s] python3-devel-3.4.5-9.1 ######################################## [ 36s] python3-setuptools-18.3.2-2.4 ######################################## [ 36s] update-alternatives: using /usr/bin/easy_install-3.4 to provide /usr/bin/easy_install (easy_install) in auto mode [ 36s] brp-check-suse-13.2+git20150217.031533######################################## [ 36s] m4-1.4.16-4.5 ######################################## [ 36s] attr-2.4.47-6.57 ######################################## [ 36s] build-mkbaselibs-20160809-1.2 ######################################## [ 36s] fdupes-1.50-8.57 ######################################## [ 36s] removing nis flags from /var/cache/obs-build/opensuse/42.2/x86_64/etc/nsswitch.conf... [ 36s] now finalizing build dir... [ 36s] ----------------------------------------------------------------- [ 36s] ----- building pyhoca-cli.spec (user abuild) [ 36s] ----------------------------------------------------------------- [ 36s] ----------------------------------------------------------------- [ 36s] + exec rpmbuild -bb --define '_srcdefattr (-,root,root)' --nosignature /home/abuild/rpmbuild/SOURCES/pyhoca-cli.spec [ 36s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.MhuUA8 [ 36s] + umask 022 [ 36s] + cd /home/abuild/rpmbuild/BUILD [ 36s] + cd /home/abuild/rpmbuild/BUILD [ 36s] + rm -rf pyhoca-cli-0.5.99.0 [ 36s] + /usr/bin/gzip -dc /home/abuild/rpmbuild/SOURCES/pyhoca-cli-0.5.99.0.tar.gz [ 36s] + /bin/tar -xf - [ 36s] + STATUS=0 [ 36s] + '[' 0 -ne 0 ']' [ 36s] + cd pyhoca-cli-0.5.99.0 [ 36s] + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 36s] + exit 0 [ 36s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.rybClf [ 36s] + umask 022 [ 36s] + cd /home/abuild/rpmbuild/BUILD [ 36s] + /usr/bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.x86_64 [ 36s] ++ dirname /home/abuild/rpmbuild/BUILDROOT/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.x86_64 [ 36s] + /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT [ 36s] + /usr/bin/mkdir /home/abuild/rpmbuild/BUILDROOT/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.x86_64 [ 36s] + cd pyhoca-cli-0.5.99.0 [ 36s] + '%{__python3}' setup.py build [ 36s] /var/tmp/rpm-tmp.rybClf: line 32: fg: no job control [ 36s] error: Bad exit status from /var/tmp/rpm-tmp.rybClf (%build) [ 36s] [ 36s] [ 36s] RPM build errors: [ 36s] Bad exit status from /var/tmp/rpm-tmp.rybClf (%build) [ 36s] [ 36s] japsand failed "build pyhoca-cli.spec" at Mon Sep 25 11:34:27 UTC 2017. [ 36s] + exit 1 + cleanup + '[' -n '' ']' + '[' -n '' ']' + echo 'Warning: mock temporary config directory not defined. Skipping cleanup.' Warning: mock temporary config directory not defined. Skipping cleanup. + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.vqnG1cN0GEwuiRMyGfrhR6KN ']' + '[' -d /var/lib/jenkins/tmp/tmp.vqnG1cN0GEwuiRMyGfrhR6KN ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.vqnG1cN0GEwuiRMyGfrhR6KN Build step 'Execute shell' marked build as failure

1 18

[buildscripts] branch master updated (6226463 -> 6a00270)
by git-admin＠x2go.org 30 Jun '18

30 Jun '18

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch master in repository buildscripts. from 6226463 sbuild-deb-package: Make sure that a certain Git branch that we want to build from is obtained from origin. new 234ce9d bin/sbuild-deb-package: also fetch the other upstream/* branches and ignore such failures. new 6a00270 bin/sbuild-deb-package: add more quotes to the git checkout code. The 2 revisions listed above as "new" are entirely new to this repository and will be described in separate emails. The revisions listed as "adds" were already present in the repository and have only been added to this reference. Summary of changes: bin/sbuild-deb-package | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/buildscripts.git

1 2

[buildscripts] branch master updated (5efbf67 -> 6226463)
by git-admin＠x2go.org 30 Jun '18

30 Jun '18

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch master in repository buildscripts. from 5efbf67 bin/sbuild-deb-package: fetch upstream branch before creating an archive. new 6226463 sbuild-deb-package: Make sure that a certain Git branch that we want to build from is obtained from origin. The 1 revisions listed above as "new" are entirely new to this repository and will be described in separate emails. The revisions listed as "adds" were already present in the repository and have only been added to this reference. Summary of changes: bin/sbuild-deb-package | 1 + 1 file changed, 1 insertion(+) -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/buildscripts.git

1 1

[buildscripts] branch master updated (0b22c59 -> 5efbf67)
by git-admin＠x2go.org 30 Jun '18

30 Jun '18

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch master in repository buildscripts. from 0b22c59 bin/sbuild-deb-package: replace tilde characters in upstream version with underscore characters. new 5efbf67 bin/sbuild-deb-package: fetch upstream branch before creating an archive. The 1 revisions listed above as "new" are entirely new to this repository and will be described in separate emails. The revisions listed as "adds" were already present in the repository and have only been added to this reference. Summary of changes: bin/sbuild-deb-package | 5 +++++ 1 file changed, 5 insertions(+) -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/buildscripts.git

1 1

[pale-moon] branch master updated (35b92b4 -> e2b6486)
by git-admin＠x2go.org 30 Jun '18

30 Jun '18

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch master in repository pale-moon. from 35b92b4 debian/changelog: change repack-1 in version string to repack1 because a dash denotes the start of a downstream change. new e2b6486 Revert "debian/changelog: change repack-1 in version string to repack1 because a dash denotes the start of a downstream change." The 1 revisions listed above as "new" are entirely new to this repository and will be described in separate emails. The revisions listed as "adds" were already present in the repository and have only been added to this reference. Summary of changes: debian/changelog | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/pale-moon.git

1 1

[pale-moon] branch upstream/27.9.2_repack-1 created (now 076feb4)
by git-admin＠x2go.org 30 Jun '18

30 Jun '18

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch upstream/27.9.2_repack-1 in repository pale-moon. at 076feb4 Fix missing include in Skia SafeMath No new revisions were added by this update. -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/pale-moon.git

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

x2go-commits June 2018