x2go-commits December 2017

x2go-commits@lists.x2go.org

3 participants
263 discussions

Start a nNew thread

Jenkins build is back to normal : x2goserver+ppc64le+release+main #4
by jenkins＠x2go.org 08 Dec '17

08 Dec '17

See <http://jenkins.x2go.org:8080/job/x2goserver+ppc64le+release+main/4/display/…>

1 0

Build failed in Jenkins: x2goserver+ppc64be+release+main #2
by jenkins＠x2go.org 08 Dec '17

08 Dec '17

See <http://jenkins.x2go.org:8080/job/x2goserver+ppc64be+release+main/2/display/…> ------------------------------------------ [...truncated 82.90 KB...] + IFS=' ' + typeset line= + for line in '"${rpm_build_for_arr[@]}"' ++ cut -d: -f1 ++ tr '[:upper:]' '[:lower:]' + l_DIST=epel ++ cut -d: -f2- ++ tr '[:upper:]' '[:lower:]' ++ sed -e 's/,/ /g' + l_CODENAMES=7 + grep -qs epel + for l_CODENAME in '${l_CODENAMES}' + test -z '' + typeset -a arches + arches=() + arches+=("SRPM") + case "${PLATFORM}" in + arches+=("ppc64") + typeset l_ARCH=SRPM + mkdir -p -- /home/x2go-jenkins/pkg-dist/main/x2goserver/epel/7/SRPM/rpmbuild/SOURCES +++ repeat_str X 24 +++ typeset INPUT=X +++ typeset COUNT=24 +++ typeset ret= +++ typeset -i i=0 +++ '[' 0 -lt 24 ']' ++++ printf X +++ ret=X +++ i=1 +++ '[' 1 -lt 24 ']' ++++ printf X +++ ret=XX +++ i=2 +++ '[' 2 -lt 24 ']' ++++ printf X +++ ret=XXX +++ i=3 +++ '[' 3 -lt 24 ']' ++++ printf X +++ ret=XXXX +++ i=4 +++ '[' 4 -lt 24 ']' ++++ printf X +++ ret=XXXXX +++ i=5 +++ '[' 5 -lt 24 ']' ++++ printf X +++ ret=XXXXXX +++ i=6 +++ '[' 6 -lt 24 ']' ++++ printf X +++ ret=XXXXXXX +++ i=7 +++ '[' 7 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXX +++ i=8 +++ '[' 8 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXX +++ i=9 +++ '[' 9 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXX +++ i=10 +++ '[' 10 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXX +++ i=11 +++ '[' 11 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXX +++ i=12 +++ '[' 12 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXX +++ i=13 +++ '[' 13 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXX +++ i=14 +++ '[' 14 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXX +++ i=15 +++ '[' 15 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXX +++ i=16 +++ '[' 16 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXX +++ i=17 +++ '[' 17 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXX +++ i=18 +++ '[' 18 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXX +++ i=19 +++ '[' 19 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXX +++ i=20 +++ '[' 20 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXX +++ i=21 +++ '[' 21 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXX +++ i=22 +++ '[' 22 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXX +++ i=23 +++ '[' 23 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXXX +++ i=24 +++ '[' 24 -lt 24 ']' +++ printf XXXXXXXXXXXXXXXXXXXXXXXX +++ return 0 ++ mktemp -d --tmpdir=/home/x2go-jenkins/tmp/ tmp.XXXXXXXXXXXXXXXXXXXXXXXX + TEMP_DIR=/home/x2go-jenkins/tmp/tmp.xUMlNlAYKMDYMk6YRhliKWoE + temp_cleanup+=("${TEMP_DIR}") + mkdir -p -- /home/x2go-jenkins/tmp/tmp.xUMlNlAYKMDYMk6YRhliKWoE/x2goserver + chmod -Rf -- 2770 /home/x2go-jenkins/tmp/tmp.xUMlNlAYKMDYMk6YRhliKWoE + cd /home/x2go-jenkins/build/main/x2goserver + git clone --no-hardlinks --no-local /home/x2go-jenkins/build/main/x2goserver /home/x2go-jenkins/tmp/tmp.xUMlNlAYKMDYMk6YRhliKWoE/x2goserver/ Cloning into '/home/x2go-jenkins/tmp/tmp.xUMlNlAYKMDYMk6YRhliKWoE/x2goserver'... + cd /home/x2go-jenkins/tmp/tmp.xUMlNlAYKMDYMk6YRhliKWoE ++ cd x2goserver ++ gitrevno ++ cd - + GITREV=1197 + pushd x2goserver + git --no-pager log --since '2 years ago' '--format=%ai %aN (%h) %n%n%x09*%w(68,0,10) %s%d%n' + popd + rm -Rf -- x2goserver/.git + mv -- x2goserver/x2goserver.spec . ++ awk '{ print $2 }' ++ grep -E -- '^Version:.*' x2goserver.spec + UPSTREAM_VERSION=4.0.1.22 ++ grep -E -- '^Release:.*' x2goserver.spec ++ awk '{ print $2 }' + PKG_RELEASE='0.0x2go1%{?dist}' ++ sed -e 's/%{?dist}//' + PKG_SRCRELEASE=0.0x2go1 ++ grep -qsE -- '^BuildArch:.*noarch$' x2goserver.spec ++ echo no + IS_NOARCH=no + '[' main = heuler ']' + IS_RELEASE=1 + sed -i x2goserver.spec -e 's/%{?dist}/.1.git20171204.1197.main%{?dist}/' + '[' -f x2goserver/debian/patches/series ']' + awk '{ print $2 }' + grep -E '^Source[1-9]+:.*' x2goserver.spec + read source_file + sed 's/%{name}/x2goserver/' + find x2goserver/rpm/x2goserver.service -maxdepth 0 find: `x2goserver/rpm/x2goserver.service': No such file or directory + find x2goserver/x2goserver.service -maxdepth 0 + cp -- x2goserver/x2goserver.service /home/x2go-jenkins/pkg-dist/main/x2goserver/epel/7/SRPM/rpmbuild/SOURCES/ + read source_file + find x2goserver/rpm/x2goserver.init -maxdepth 0 + cp -- x2goserver/rpm/x2goserver.init /home/x2go-jenkins/pkg-dist/main/x2goserver/epel/7/SRPM/rpmbuild/SOURCES/ + continue + read source_file + find x2goserver/rpm/x2goserver-rpmlintrc -maxdepth 0 + cp -- x2goserver/rpm/x2goserver-rpmlintrc /home/x2go-jenkins/pkg-dist/main/x2goserver/epel/7/SRPM/rpmbuild/SOURCES/ + continue + read source_file + mv -- /home/x2go-jenkins/tmp/tmp.xUMlNlAYKMDYMk6YRhliKWoE/x2goserver /home/x2go-jenkins/tmp/tmp.xUMlNlAYKMDYMk6YRhliKWoE/x2goserver-4.0.1.22 + tar -czf /home/x2go-jenkins/pkg-dist/main/x2goserver/epel/7/SRPM/rpmbuild/SOURCES/x2goserver-4.0.1.22.tar.gz x2goserver-4.0.1.22 + cp -- x2goserver.spec /home/x2go-jenkins/pkg-dist/main/x2goserver/epel/7/SRPM/rpmbuild/SOURCES + cd + rm -Rf -- /home/x2go-jenkins/tmp/tmp.xUMlNlAYKMDYMk6YRhliKWoE/x2goserver + '[' xepel = xopensuse ']' + '[' xepel = xsle ']' + typeset arch= + for arch in '"${arches[@]}"' + mkdir -p -- /home/x2go-jenkins/pkg-dist/main/x2goserver/epel/7/SRPM + for arch in '"${arches[@]}"' + mkdir -p -- /home/x2go-jenkins/pkg-dist/main/x2goserver/epel/7/ppc64 + typeset -i noarch_built=0 + for l_ARCH in '"${arches[@]}"' + '[' SRPM = SRPM ']' + typeset base_arch=ppc64 + '[' -z ppc64 ']' + '[' xepel = xfedora ']' + '[' xepel = xepel ']' + '[' -d /var/lib/mock/epel-7-ppc64 ']' + rm -f -- /home/x2go-jenkins/pkg-dist/main/x2goserver/epel/7/ppc64/build.log + get_extra_repository redhat epel 7 main x2goserver ppc64 1 + typeset TYPE=redhat + typeset DIST=epel + typeset CODENAME=7 + typeset COMPONENT=main + typeset PACKAGE=x2goserver + typeset ARCH=ppc64 ++ make_boolean 1 ++ typeset -l OPTION=1 ++ case "${OPTION}" in ++ OPTION=1 ++ printf 1 ++ return 0 + typeset WANT_EXTRA=1 + case "${TYPE}" in + MOCK_CHROOT_CONFIG='-r ' + check_mock_version_atleast 1 2 0 + typeset MAJOR=1 + typeset MINOR=2 + typeset PATCH=0 ++ sed -e 's/^$[0-9][0-9]*$$//' + typeset SANITY_CHECK_MAJOR= ++ sed -e 's/^$[0-9][0-9]*$$//' + typeset SANITY_CHECK_MINOR= ++ sed -e 's/^$[0-9][0-9]*$$//' + typeset SANITY_CHECK_PATCH= + '[' -n '' ']' + '[' -n '' ']' + '[' -n '' ']' ++ mock --version ERROR: [Errno 1] Operation not permitted ERROR: The most common cause for this error is trying to run /usr/sbin/mock as an unprivileged user. ERROR: Check your path to make sure that /usr/bin/ is listed before /usr/sbin, or manually run /usr/bin/mock to see if that fixes this problem. + typeset MOCK_VER= ++ head -n 1 + MOCK_VER= ++ grep -Eo '[0-9]+\.[0-9]+\.[0-9]+' + MOCK_VER= + '[' -z '' ']' + echo 'Error: the reported mock version can not be handled by check_mock_version_atleast().' Error: the reported mock version can not be handled by check_mock_version_atleast(). + exit 1 + cleanup + '[' -n '' ']' + '[' -n '' ']' + echo 'Warning: mock temporary config directory not defined. Skipping cleanup.' Warning: mock temporary config directory not defined. Skipping cleanup. + typeset temp_dir= + for temp_dir in '"${temp_cleanup[@]}"' + '[' -n /home/x2go-jenkins/tmp/tmp.xUMlNlAYKMDYMk6YRhliKWoE ']' + '[' -d /home/x2go-jenkins/tmp/tmp.xUMlNlAYKMDYMk6YRhliKWoE ']' + rm -Rf -- /home/x2go-jenkins/tmp/tmp.xUMlNlAYKMDYMk6YRhliKWoE Build step 'Execute shell' marked build as failure

1 2

[buildscripts] branch master updated (e56648a -> ea92e30)
by git-admin＠x2go.org 08 Dec '17

08 Dec '17

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch master in repository buildscripts. from e56648a bin/sbuild-deb-package: only skip source packages if they only contain arch-indep binary packages. new ea92e30 bin/slave-start-prepare.sh: let sudo spawn login shells. The 1 revisions listed above as "new" are entirely new to this repository and will be described in separate emails. The revisions listed as "adds" were already present in the repository and have only been added to this reference. Summary of changes: bin/slave-start-prepare.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -- Alioth's /home/x2go-admin/maintenancescripts/git/hooks/post-receive-email on /srv/git/code.x2go.org/buildscripts.git

1 1

[[X2Go Wiki]] page changed: events:start
by wiki-admin＠x2go.org 07 Dec '17

07 Dec '17

A page in your DokuWiki was added or changed. Here are the details: Date : 2017/12/07 17:19 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.6.2 IP-Address : 134.3.37.90 Hostname : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/events:start?rev=1512667087 New Revision: https://wiki.x2go.org/doku.php/events:start Edit Summary: [Tentative] No Gathering in August for sure User : stefanbaur @@ -6,9 +6,9 @@ * LinuxDay.AT 2018, Dornbirn, Austria, probably late November or early December 2018 * Modell & Technik 2018, Stuttgart, Germany, 2018-11-22 - 2018-11-25 (unlikely) * IT-Kongress Neu-Ulm 2018, Neu-Ulm, Germany, probably November 8, 2018 (unlikely) * Linux Expo Ulm 2018, Ulm, Germany (unlikely, but more likely than IT-Kongress - LPD 2018.1 is 2018-04-21; LPD 2018.2 is 2018-11-10) - * X2Go: The Gathering 2018, some time between May and October 2018, Location TBD + * X2Go: The Gathering 2018, some time between May-July or September-October 2018, Location TBD * TUEBIX 2018, Tuebingen, Germany, probably June 2018 (no CfP yet) * LITA 2018, Augsburg, Germany, probably 2018-04-21, same as LPD 2018.1 (no CfP yet) * Chemnitzer LinuxTage 2018, Chemnitz, Germany, 2018-03-10 - 2018-03-11 (CfP open, nothing submitted yet - deadline: 2018-01-08) * IBM Success Made With Partners, Ehningen, Germany, 2018-02-20 (CfP sent, waiting for confirmation, title: "X2Go - the Remote-Desktop- and Remote-Application-Solution (not only) for Linux on POWER" - note the Talk, if accepted, will be in German. Further event info/agenda can be found [[https://www-01.ibm.com/events/wwe/grp/grp312.nsf/Agenda.xsp?openform&semina…]] -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: events:start
by wiki-admin＠x2go.org 07 Dec '17

07 Dec '17

A page in your DokuWiki was added or changed. Here are the details: Date : 2017/12/07 17:18 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.6.2 IP-Address : 134.3.37.90 Hostname : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/events:start?rev=1512666918 New Revision: https://wiki.x2go.org/doku.php/events:start Edit Summary: [Tentative] added IBM Event agenda link User : stefanbaur @@ -10,9 +10,9 @@ * X2Go: The Gathering 2018, some time between May and October 2018, Location TBD * TUEBIX 2018, Tuebingen, Germany, probably June 2018 (no CfP yet) * LITA 2018, Augsburg, Germany, probably 2018-04-21, same as LPD 2018.1 (no CfP yet) * Chemnitzer LinuxTage 2018, Chemnitz, Germany, 2018-03-10 - 2018-03-11 (CfP open, nothing submitted yet - deadline: 2018-01-08) - * IBM Success Made With Partners, Ehningen, Germany, 2018-02-20 (CfP sent, waiting for confirmation, title: "X2Go - the Remote-Desktop- and Remote-Application-Solution (not only) for Linux on POWER" - note the Talk, if accepted, will be in German) + * IBM Success Made With Partners, Ehningen, Germany, 2018-02-20 (CfP sent, waiting for confirmation, title: "X2Go - the Remote-Desktop- and Remote-Application-Solution (not only) for Linux on POWER" - note the Talk, if accepted, will be in German. Further event info/agenda can be found [[https://www-01.ibm.com/events/wwe/grp/grp312.nsf/Agenda.xsp?openform&semina…]] ==== Pi and More 10 1/2, University of Stuttgart, Stuttgart, Germany (2018-02-24) ==== * Location information: https://piandmore.de/en/next/venue (English) / https://piandmore.de/de/next/ort (German) * Booth confirmed -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: events:start
by wiki-admin＠x2go.org 07 Dec '17

07 Dec '17

A page in your DokuWiki was added or changed. Here are the details: Date : 2017/12/07 17:15 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.6.2 IP-Address : 134.3.37.90 Hostname : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/events:start?rev=1512666819 New Revision: https://wiki.x2go.org/doku.php/events:start Edit Summary: [Tentative] added talk title for IBM event User : stefanbaur @@ -10,9 +10,9 @@ * X2Go: The Gathering 2018, some time between May and October 2018, Location TBD * TUEBIX 2018, Tuebingen, Germany, probably June 2018 (no CfP yet) * LITA 2018, Augsburg, Germany, probably 2018-04-21, same as LPD 2018.1 (no CfP yet) * Chemnitzer LinuxTage 2018, Chemnitz, Germany, 2018-03-10 - 2018-03-11 (CfP open, nothing submitted yet - deadline: 2018-01-08) - * IBM Success Made With Partners, Ehningen, Germany, 2018-02-20 (CfP sent, waiting for confirmation) + * IBM Success Made With Partners, Ehningen, Germany, 2018-02-20 (CfP sent, waiting for confirmation, title: "X2Go - the Remote-Desktop- and Remote-Application-Solution (not only) for Linux on POWER" - note the Talk, if accepted, will be in German) ==== Pi and More 10 1/2, University of Stuttgart, Stuttgart, Germany (2018-02-24) ==== * Location information: https://piandmore.de/en/next/venue (English) / https://piandmore.de/de/next/ort (German) * Booth confirmed -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: events:start
by wiki-admin＠x2go.org 07 Dec '17

07 Dec '17

A page in your DokuWiki was added or changed. Here are the details: Date : 2017/12/07 17:13 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.6.2 IP-Address : 134.3.37.90 Hostname : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/events:start?rev=1512424414 New Revision: https://wiki.x2go.org/doku.php/events:start Edit Summary: [Tentative] added IBM Event and updated dates to conform to YYYY-MM-DD where possible User : stefanbaur @@ -2,16 +2,17 @@ ===== Upcoming Events ===== ===== 2018 ===== ====Tentative==== - * LinuxDay.AT 2018, probably late November or early December 2018 - * Modell & Technik 2018, November 22-25, 2018 (unlikely) - * IT-Kongress Neu-Ulm 2018, probably November 8, 2018 (unlikely) - * Linux Expo Ulm 2018 (unlikely, but more likely than IT-Kongress - LPD 2018.1 is April 21, 2018; LPD 2018.2 is November 10, 2018) - * X2Go: The Gathering 2018, some time between May and October 2018 - * TUEBIX 2018, probably June 2018 (no CfP yet) - * LITA 2018, probably April 21, 2018 (no CfP yet) - * Chemnitzer LinuxTage 2018, March 10-11, 2018 (CfP open, nothing submitted yet - deadline: 2018-01-08) + * LinuxDay.AT 2018, Dornbirn, Austria, probably late November or early December 2018 + * Modell & Technik 2018, Stuttgart, Germany, 2018-11-22 - 2018-11-25 (unlikely) + * IT-Kongress Neu-Ulm 2018, Neu-Ulm, Germany, probably November 8, 2018 (unlikely) + * Linux Expo Ulm 2018, Ulm, Germany (unlikely, but more likely than IT-Kongress - LPD 2018.1 is 2018-04-21; LPD 2018.2 is 2018-11-10) + * X2Go: The Gathering 2018, some time between May and October 2018, Location TBD + * TUEBIX 2018, Tuebingen, Germany, probably June 2018 (no CfP yet) + * LITA 2018, Augsburg, Germany, probably 2018-04-21, same as LPD 2018.1 (no CfP yet) + * Chemnitzer LinuxTage 2018, Chemnitz, Germany, 2018-03-10 - 2018-03-11 (CfP open, nothing submitted yet - deadline: 2018-01-08) + * IBM Success Made With Partners, Ehningen, Germany, 2018-02-20 (CfP sent, waiting for confirmation) ==== Pi and More 10 1/2, University of Stuttgart, Stuttgart, Germany (2018-02-24) ==== * Location information: https://piandmore.de/en/next/venue (English) / https://piandmore.de/de/next/ort (German) * Booth confirmed -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 07 Dec '17

07 Dec '17

A page in your DokuWiki was added or changed. Here are the details: Date : 2017/12/07 15:28 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.6.2 IP-Address : 134.3.37.90 Hostname : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1512660446 New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [List of open ToDos/FIXMEs for this page] marked too much as done, un-marking User : stefanbaur @@ -1060,10 +1060,10 @@ FIXME To be checked: Does the live-config "builtin" command ''live-config.nottyautologin'' do the same as our ''nouser'' command? If yes, ''nouser'' could be removed. Note that ''live-config.nottyautologin'' **might** mean "there's a login prompt, but you just need to enter username ''user'' and password ''live'' to login" - this is not what we want. We need a solution to entirely block user logons. FIXME autodetection for SSH Private Keys might need some more bells and whistles. <del>For USB media, this may require adding an automounter.</del> - * <del>how about a script that patches the sessions file to enable autologin for all sessions when keys have been found?</del> - * <del>2800-x2go-thinclientconfig needs to be changed so it uses the keyfile(s) when in broker mode (''--broker-ssh-key'')</del> + * how about a script that patches the sessions file to enable autologin for all sessions when keys have been found? + * 2800-x2go-thinclientconfig needs to be changed so it uses the keyfile(s) when in broker mode (''--broker-ssh-key'') * <del>directory scan </del> * <del>should we abort on first match?</del> * <del>how do we treat multiple keys?</del> * <del>no keys on USB and exactly one key on disk -> use key</del> -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 07 Dec '17

07 Dec '17

A page in your DokuWiki was added or changed. Here are the details: Date : 2017/12/07 15:27 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.6.2 IP-Address : 134.3.37.90 Hostname : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1512659666 New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [List of open ToDos/FIXMEs for this page] updated entry regarding ssh secret key handling User : stefanbaur @@ -1059,21 +1059,26 @@ FIXME To be checked: Does the live-config "builtin" command ''live-config.nottyautologin'' do the same as our ''nouser'' command? If yes, ''nouser'' could be removed. Note that ''live-config.nottyautologin'' **might** mean "there's a login prompt, but you just need to enter username ''user'' and password ''live'' to login" - this is not what we want. We need a solution to entirely block user logons. FIXME autodetection for SSH Private Keys might need some more bells and whistles. - For USB media, this may require adding an automounter. - * how about a script that patches the sessions file to enable autologin for all sessions when keys have been found? - * 2800-x2go-thinclientconfig needs to be changed so it uses the keyfile(s) when in broker mode (''--broker-ssh-key'') - * directory scan - * should we abort on first match? - * how do we treat multiple keys? - * no keys on USB and exactly one key on disk -> use key - * exactly one key on USB -> takes precedence over key/keys found on disk? Or present chooser based on gxmessage? - * multiple keys -> Present chooser based on gxmessage? - * problem with gxmessage as chooser is that it can only display 6 buttons on 640x480 (Which we should assume as minimum screen size) - * 4 key choices, back, next? - * oooooor we might just load all keys into ssh-agent and let it figure out which one it needs? - * next problem: How do we prompt for passwords of such keys? + <del>For USB media, this may require adding an automounter.</del> + * <del>how about a script that patches the sessions file to enable autologin for all sessions when keys have been found?</del> + * <del>2800-x2go-thinclientconfig needs to be changed so it uses the keyfile(s) when in broker mode (''--broker-ssh-key'')</del> + * <del>directory scan </del> + * <del>should we abort on first match?</del> + * <del>how do we treat multiple keys?</del> + * <del>no keys on USB and exactly one key on disk -> use key</del> + * <del>exactly one key on USB -> takes precedence over key/keys found on disk? Or present chooser based on gxmessage?</del> + * <del>multiple keys -> Present chooser based on gxmessage?</del> + * <del>problem with gxmessage as chooser is that it can only display 6 buttons on 640x480 (Which we should assume as minimum screen size)</del> + * <del>4 key choices, back, next?</del> + * <del>oooooor we might just load all keys into ssh-agent and let it figure out which one it needs?</del> + * <del>next problem: How do we prompt for passwords of such keys?</del> + * Situation: We have a working automounter, and ''copysecring'' will copy all keys found to the live-user's homedir under .ssh: + * If a session is set to "Try auto login (via SSH Agent or default SSH key)" and NO keyfile is set, then X2GoClient will try **all** secret keys in .ssh. Showing a password prompt if a key is password-protected is handled by X2GoClient, so needs no extra work. + * To specify a keyfile, either: + * use ''~/.ssh/keyfilename'' as path and use ''copysecring'', or + * do not use ''copysecring'' and use ''/media/vendor_model_name/sdxn/path/to/keyfile'' as keyfile path/name FIXME 2200-xserver-xorg-getxorgconf should be taught to understand file:<nowiki>//</nowiki> URLs. FIXME Parsing the output of e.g. <code>udevadm info --query path /dev/sdb -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 07 Dec '17

07 Dec '17

A page in your DokuWiki was added or changed. Here are the details: Date : 2017/12/07 15:14 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.6.2 IP-Address : 134.3.37.90 Hostname : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1512430301 New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [List of open ToDos/FIXMEs for this page] some things are now fixed, marked as such User : stefanbaur @@ -1080,9 +1080,9 @@ /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host2/target2:0:0/2:0:0:0/block/sdb cat /sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/serial</code> allows to determine the serial number of a USB device. Those SHOULD be unique, but sadly, they aren't (and sometimes, they are missing entirely). Therefore, a USB serial number can't be used for authentication, but it could be used for "weak" identification - so it could be used to set a default user name or a default session, or to download a particular sessions file. Authentification and "hard" identification could be implemented using OpenPGP cards, ''scdaemon'' and a script based on ''/usr/share/doc/scdaemon/examples/scd-event''. For Status ''NOCARD'', suspend the session (kill x2goclient or send a signal that means "suspend", if available, or maybe sighup nxproxy), for status ''USABLE'', run ''gpg --card-status 2>&1 | awk '$1=="Serial" && $2=="number" {print $4}''' to determine the card's serial number, then act based on that (pull new sessions file or set default user, for example, and restart x2goclient). - FIXME Automount script expansion is in the works. Will fully support VFAT, NTFS, hfs, hpfs, will offer read-only support for ext* via fuseext2 (that way, file ownership/permissions are ignored). + FIXME <del>Automount script expansion is in the works. Will fully support VFAT, NTFS, hfs, hpfs, will offer read-only support for ext* via fuseext2 (that way, file ownership/permissions are ignored).</del> fixed. FIXME Maybe we should add symlinks to the mount points created by the automounter: Currently, we create ''/media/vendor_model_name/sdxn'' as a mount point. The idea is to allow the user to find their portable device using the vendor/model name description. However, this is unusable for scripting, as the ''//x//'' in ''sdxn'' may change any time. We should replace ''//sdx//'' with ''//partition//'' (or have corresponding symlinks created), but what should we do for //superfloppies// that only have ''sdx'' with no partition number? We could mount them as ''/media/vendor_model_name/partition/'' or directly at ''/media/vendor_model_name/''. Also, symlinks using labels and uuids, similar to ''/dev/by-*'' would be handy for scripting. Another problem: when replacing ''sdx'', what will happen when a user inserts two media with the same vendor/model name at the same time? Blindly replacing the string would make one of them inaccessible due to overwriting the symlink(s). We'd have to start checking active mounts and enumerate them like ''media/vendor_model_name/1/partitionn/'' or ''media/vendor_model_name-1/partitionn/''. FIXME Automount script currently expects a LUKS password in ''/etc/keys/keystick.key'' when it believes it has found an encrypted partition on USB media. This is a problem in general, as it should be trivial to sniff out this password using a rogue client. If we want to support this feature, though, we should add code to the build script that lets the user place a password file in the image, and sets proper restrictive permissions. Adding a boot parameter instead of hardcoding it would allow for dynamic password files, but on the other hand, would make it even easier to sniff out the password. @@ -1094,17 +1094,17 @@ FIXME Even though we set the hostname to localhost using the corresponding boot parameter, as recommended by Debian, changing the name via DHCP does not work for all image flavours. One way to fix this might be http://blog.schlomo.schapiro.org/2013/11/setting-hostname-from-dhcp-in-debi… FIXME At least when building a stretch TCE on a jessie system, you need to add kernel parameters ''net.ifnames=0 biosdevname=0'' to the image's kernel parameters, else you will receive error messages about the hostname script being unable to find eth0. This might not be necessary when building a stretch TCE on stretch. For a jessie TCE on jessie, it is not required. - FIXME There might be a race condition between the scripts handling the sshd keyfile and the ssh private key file copy task (/config ...), causing one to umount the fixed disk before the other is done reading/copying. What's weird is that there already is code that is supposed to keep this from happening, but it doesn't. + FIXME <del>There might be a race condition between the scripts handling the sshd keyfile and the ssh private key file copy task (/config ...), causing one to umount the fixed disk before the other is done reading/copying. What's weird is that there already is code that is supposed to keep this from happening, but it doesn't.</del> fixed in github repo, soon in x2go repo FIXME Setting the time via NTP will fail if the TC can't establish a connection to an NTP server via the internet. It would make sense to allow specifying an internal NTP server via a boot parameter. - FIXME copysecring currently does not work in MiniDesktop-Mode, as it copies the keys to the wrong user's homedir. + FIXME <del>copysecring currently does not work in MiniDesktop-Mode, as it copies the keys to the wrong user's homedir.</del> fixed in github repo, soon in x2go repo FIXME blank=, broker-url=, ldap=, ldap1=, ldap2=, session=, throttle=, xinerama=, are currently unsupported in MiniDesktop-Mode. This could be changed, given enough tuits. FIXME nomagicpixel= is currently unsupported in MiniDesktop-Mode and probably will be unsupported there forever, as it doesn't make sense for MiniDesktop-Mode. FIXME bg= and branding= are currently unsupported in MiniDesktop-Mode. Adding support for these doesn't need many tuits. A third option for the desktop background could be added as well - possibly for regular TCE mode as well, overriding our default blue. FIXME homepageurl= (only available in MiniDesktop-Mode) is currently undocumented. Supports multiple URLs separated with pipes. -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

← Newer
1
...
19
20
21
22
23
24
25
26
27
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

x2go-commits December 2017