x2go-commits October 2017

x2go-commits@lists.x2go.org

3 participants
119 discussions

Build failed in Jenkins: x2gobroker+nightly+epel-6 #241
by jenkins＠x2go.org 12 Feb '18

12 Feb '18

See <http://jenkins.x2go.org:8080/job/x2gobroker+nightly+epel-6/241/display/redi…> Changes: [mike.gabriel] bump upstream version to 0.0.4.0 [mike.gabriel] src/*.c: Fix implicit declaration of execv(). [mike.gabriel] debian/{control,compat}: Bump to DH version level 9. [mike.gabriel] Port to Python3 [mike.gabriel] Drop left-over debug print() call. [mike.gabriel] debian/control: Drop from D (several bin:pkgs): python3-argparse, [mike.gabriel] Makefile: Assure that setup.py is run under Python3. [mike.gabriel] Makefile: Add check target (drop empty test target). [mike.gabriel] debian/rules: Enable unit tests at every package build. [mike.gabriel] x2gobroker.spec: Adapt to Python3 port. [mike.gabriel] debian/{control,x2gobroker-common.install}: Split out common files into [mike.gabriel] debian/*.install: Add EOLs at EOF. [mike.gabriel] debian/control: Switch from libapache2-mod-wsgi to [mike.gabriel] Makefile: Clean-up x2gobroker-ssh executable in clean-arch target. [mike.gabriel] Improve debugging messages during authentication phase. [mike.gabriel] Make hostname detection work for the default configuration (that defines [mike.gabriel] x2gobroker.spec: Bump package version. ------------------------------------------ [...truncated 111.57 KB...] + '[' 1 -eq 1 ']' + [[ name=epel-testing =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo name=epel-testing + read line + [[ enabled=0 =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ enabled=0 =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo enabled=0 + read line + [[ mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=testing-epel6&a… =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=testing-epel6&a… =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo 'mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=testing-epel6&a…' + read line + [[ failovermethod=priority =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ failovermethod=priority =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo failovermethod=priority + read line + [[ '' =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ '' =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo '' + read line + [[ [local] =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ [local] =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo '[local]' + read line + [[ name=local =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ name=local =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo name=local + read line + [[ baseurl=https://kojipkgs.fedoraproject.org/repos/dist-6E-epel-build/latest/… =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ baseurl=https://kojipkgs.fedoraproject.org/repos/dist-6E-epel-build/latest/… =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo baseurl=https://kojipkgs.fedoraproject.org/repos/dist-6E-epel-build/latest/… + read line + [[ cost=2000 =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ cost=2000 =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo cost=2000 + read line + [[ enabled=0 =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ enabled=0 =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo enabled=0 + read line + [[ '' =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ '' =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo '' + read line + [[ [epel-debuginfo] =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ [epel-debuginfo] =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo '[epel-debuginfo]' + read line + [[ name=epel-debug =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ name=epel-debug =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo name=epel-debug + read line + [[ mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=epel-debug-6&ar… =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=epel-debug-6&ar… =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo 'mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=epel-debug-6&ar…' + read line + [[ failovermethod=priority =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ failovermethod=priority =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo failovermethod=priority + read line + [[ enabled=0 =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ enabled=0 =~ ^[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 0 ']' + echo enabled=0 + read line + [[ """ =~ ^[[:space:]]*config_opts\['yum\.conf'\][[:space:]]*=[[:space:]]*"""[[:space:]]*$ ]] + '[' 1 -eq 1 ']' + [[ """ =~ ^[[:space:]]*"""[[:space:]]*$ ]] + printf '\n' + typeset -i i=0 + (( i = 0 )) + (( i < 8 )) + echo '[x2go-extras-epel]' + (( ++i )) + (( i < 8 )) + echo 'name=Upstream X2Go EPEL Packages (Extra Packages)' + (( ++i )) + (( i < 8 )) + echo baseurl=http://packages.x2go.org/epel/6/extras/x86_64 + (( ++i )) + (( i < 8 )) + echo gpgcheck=0 + (( ++i )) + (( i < 8 )) + echo gpgkey=http://packages.x2go.org/pub.key + (( ++i )) + (( i < 8 )) + echo enabled=1 + (( ++i )) + (( i < 8 )) + echo protect=0 + (( ++i )) + (( i < 8 )) + echo '' + (( ++i )) + (( i < 8 )) + '[' full = full ']' + printf '\n' + typeset -i i=0 + (( i = 0 )) + (( i < 8 )) + echo '[x2go-nightly-epel]' + (( ++i )) + (( i < 8 )) + echo 'name=Upstream X2Go EPEL Packages (Nightly Builds)' + (( ++i )) + (( i < 8 )) + echo baseurl=http://packages.x2go.org/epel/6/heuler/x86_64 + (( ++i )) + (( i < 8 )) + echo gpgcheck=0 + (( ++i )) + (( i < 8 )) + echo gpgkey=http://packages.x2go.org/pub.key + (( ++i )) + (( i < 8 )) + echo enabled=1 + (( ++i )) + (( i < 8 )) + echo protect=0 + (( ++i )) + (( i < 8 )) + echo '' + (( ++i )) + (( i < 8 )) + echo '"""' + read line + IFS=' ' + cache_mock_config + typeset tmp_mock_config=/var/lib/jenkins/tmp/x2go-mock-1SOw1amxhWuScLBXn0v0ikC4/epel-6-x86_64-x2go-nightly-full.ayBiqnKFD7aaI7o6xahWBpx8.cfg + typeset 'tmp_regex=^.*\.cfg$' + [[ ! /var/lib/jenkins/tmp/x2go-mock-1SOw1amxhWuScLBXn0v0ikC4/epel-6-x86_64-x2go-nightly-full.ayBiqnKFD7aaI7o6xahWBpx8.cfg =~ ^.*\.cfg$ ]] + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-1SOw1amxhWuScLBXn0v0ikC4/epel-6-x86_64-x2go-nightly-full.ayBiqnKFD7aaI7o6xahWBpx8.cfg ']' + '[' '!' -r /var/lib/jenkins/tmp/x2go-mock-1SOw1amxhWuScLBXn0v0ikC4/epel-6-x86_64-x2go-nightly-full.ayBiqnKFD7aaI7o6xahWBpx8.cfg ']' ++ basename -s .cfg /var/lib/jenkins/tmp/x2go-mock-1SOw1amxhWuScLBXn0v0ikC4/epel-6-x86_64-x2go-nightly-full.ayBiqnKFD7aaI7o6xahWBpx8.cfg + typeset mock_cache_file_name=epel-6-x86_64-x2go-nightly-full.ayBiqnKFD7aaI7o6xahWBpx8 + typeset tmp=epel-6-x86_64-x2go-nightly-full.ayBiqnKFD7aaI7o6xahWBpx8 + mock_cache_file_name=epel-6-x86_64-x2go-nightly-full + '[' epel-6-x86_64-x2go-nightly-full = epel-6-x86_64-x2go-nightly-full.ayBiqnKFD7aaI7o6xahWBpx8 ']' + mock_cache_file_name=epel-6-x86_64-x2go-nightly-full.cfg + typeset mock_cache_file_path=/var/lib/jenkins/mock-cache//epel-6-x86_64-x2go-nightly-full.cfg + '[' -f /var/lib/jenkins/mock-cache//epel-6-x86_64-x2go-nightly-full.cfg ']' + '[' -r /var/lib/jenkins/mock-cache//epel-6-x86_64-x2go-nightly-full.cfg ']' + cmp -s /var/lib/jenkins/tmp/x2go-mock-1SOw1amxhWuScLBXn0v0ikC4/epel-6-x86_64-x2go-nightly-full.ayBiqnKFD7aaI7o6xahWBpx8.cfg /var/lib/jenkins/mock-cache//epel-6-x86_64-x2go-nightly-full.cfg + echo 'Cached mock config file matches generated one, using the cached file.' Cached mock config file matches generated one, using the cached file. + TMP_MOCK_CFG_FILE=/var/lib/jenkins/mock-cache//epel-6-x86_64-x2go-nightly-full.cfg + return 0 + return 0 + MOCK_CHROOT_CONFIG='-r /var/lib/jenkins/mock-cache//epel-6-x86_64-x2go-nightly-full' + '[' 0 -eq 0 ']' + MOCK_CHROOT_CONFIG='-r /var/lib/jenkins/mock-cache//epel-6-x86_64-x2go-nightly-full.cfg' + return 0 + find /var/lib/jenkins/pkg-dist/heuler/x2gobroker/epel/6/SRPM/ -type f -iname 'x2gobroker-0.0.4.0-0.0x2go1.0.git20171009.1044.heuler.*.src.rpm' -print0 + read -r -d '' srpm + mock -r /var/lib/jenkins/mock-cache//epel-6-x86_64-x2go-nightly-full.cfg --resultdir=/var/lib/jenkins/pkg-dist/heuler/x2gobroker/epel/6/x86_64 /var/lib/jenkins/pkg-dist/heuler/x2gobroker/epel/6/SRPM/x2gobroker-0.0.4.0-0.0x2go1.0.git20171009.1044.heuler.el6.src.rpm INFO: mock.py version 1.3.2-2 starting (python version = 3.5.3)... Start: init plugins INFO: selinux disabled Finish: init plugins Start: run INFO: Start(/var/lib/jenkins/pkg-dist/heuler/x2gobroker/epel/6/SRPM/x2gobroker-0.0.4.0-0.0x2go1.0.git20171009.1044.heuler.el6.src.rpm) Config(epel-6-x86_64) Start: clean chroot Finish: clean chroot Start: chroot init INFO: calling preinit hooks INFO: enabled root cache Start: unpacking root cache Finish: unpacking root cache INFO: enabled yum cache Start: cleaning yum metadata Finish: cleaning yum metadata Mock Version: 1.3.2-2 INFO: Mock Version: 1.3.2-2 Start: yum update Finish: yum update Finish: chroot init Start: build phase for x2gobroker-0.0.4.0-0.0x2go1.0.git20171009.1044.heuler.el6.src.rpm Start: build setup for x2gobroker-0.0.4.0-0.0x2go1.0.git20171009.1044.heuler.el6.src.rpm ERROR: Exception(/var/lib/jenkins/pkg-dist/heuler/x2gobroker/epel/6/SRPM/x2gobroker-0.0.4.0-0.0x2go1.0.git20171009.1044.heuler.el6.src.rpm) Config(epel-6-x86_64) 0 minutes 7 seconds INFO: Results and/or logs in: /var/lib/jenkins/pkg-dist/heuler/x2gobroker/epel/6/x86_64 INFO: Cleaning up build root ('cleanup_on_failure=True') Start: clean chroot Finish: clean chroot ERROR: Command failed: # /usr/bin/yum-builddep --installroot /var/lib/mock/epel-6-x86_64/root/ --releasever 6 /var/lib/mock/epel-6-x86_64/root//builddir/build/SRPMS/x2gobroker-0.0.4.0-0.0x2go1.0.git20171009.1044.heuler.el6.src.rpm Getting requirements for x2gobroker-0.0.4.0-0.0x2go1.0.git20171009.1044.heuler.el6.src Error: No Package found for python3-devel + cat /var/lib/jenkins/pkg-dist/heuler/x2gobroker/epel/6/x86_64/build.log Mock Version: 1.3.2-2 ENTER ['do'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/x2gobroker.spec'], chrootPath='/var/lib/mock/epel-6-x86_64/root'user='mockbuild'gid=999shell=FalseprintOutput=Falseenv={'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'SHELL': '/bin/bash', 'TERM': 'vt100', 'HOME': '/builddir', 'LANG': 'en_US.UTF-8', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'PS1': '<mock-chroot> \\s-\\v\\$ '}logger=<mockbuild.trace_decorator.getLog object at 0x7f1e6cbaf6a0>uid=106timeout=0) Executing command: ['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/x2gobroker.spec'] with env {'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'SHELL': '/bin/bash', 'TERM': 'vt100', 'HOME': '/builddir', 'LANG': 'en_US.UTF-8', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'PS1': '<mock-chroot> \\s-\\v\\$ '} and shell False Building target platforms: x86_64 Building for target x86_64 Wrote: /builddir/build/SRPMS/x2gobroker-0.0.4.0-0.0x2go1.0.git20171009.1044.heuler.el6.src.rpm Child return code was: 0 + exit 1 + cleanup + '[' -n /var/lib/jenkins/tmp/x2go-mock-1SOw1amxhWuScLBXn0v0ikC4 ']' + '[' -e /var/lib/jenkins/tmp/x2go-mock-1SOw1amxhWuScLBXn0v0ikC4 ']' + case "${TMP_MOCK_CFG_DIR}" in + typeset file= + for file in "${TMP_MOCK_CFG_DIR}/"* + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-1SOw1amxhWuScLBXn0v0ikC4/epel-6-x86_64-x2go-nightly-full.ayBiqnKFD7aaI7o6xahWBpx8.cfg ']' + rm -- /var/lib/jenkins/tmp/x2go-mock-1SOw1amxhWuScLBXn0v0ikC4/epel-6-x86_64-x2go-nightly-full.ayBiqnKFD7aaI7o6xahWBpx8.cfg + for file in "${TMP_MOCK_CFG_DIR}/"* + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-1SOw1amxhWuScLBXn0v0ikC4/epel-6-x86_64-x2go-nightly-full.YgWn8P2KDvCHM5lMADHbSnAE.cfg ']' + rm -- /var/lib/jenkins/tmp/x2go-mock-1SOw1amxhWuScLBXn0v0ikC4/epel-6-x86_64-x2go-nightly-full.YgWn8P2KDvCHM5lMADHbSnAE.cfg + '[' -e /var/lib/jenkins/tmp/x2go-mock-1SOw1amxhWuScLBXn0v0ikC4 ']' + '[' -d /var/lib/jenkins/tmp/x2go-mock-1SOw1amxhWuScLBXn0v0ikC4 ']' + rmdir -- /var/lib/jenkins/tmp/x2go-mock-1SOw1amxhWuScLBXn0v0ikC4 + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.TQNyhDdPuFJnUImZThGghxBs ']' + '[' -d /var/lib/jenkins/tmp/tmp.TQNyhDdPuFJnUImZThGghxBs ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.TQNyhDdPuFJnUImZThGghxBs Build step 'Execute shell' marked build as failure

1 7

Build failed in Jenkins: python-x2go+nightly+opensuse-42.1 #12
by jenkins＠x2go.org 12 Jan '18

12 Jan '18

See <http://jenkins.x2go.org:8080/job/python-x2go+nightly+opensuse-42.1/12/displ…> Changes: [mike.gabriel] Port to Python3. [mike.gabriel] Bump upstream version to 0.5.99.0. [mike.gabriel] debian/python-x2go-doc.lintian-overrides: Add EOL at EOF. [mike.gabriel] debian/rules: Don't build API documentation twice. [mike.gabriel] Obviously, gevent from Python3 is quite critical towards circular import [mike.gabriel] x2go/xserver.py: whitespace fix at EOF. [mike.gabriel] Futurize: Re-add Python2 support back into python-x2go. [mike.gabriel] x2go/**.py: Add __package__ and __name__ definitions to all Python [mike.gabriel] backends: No need to ship a stub gconf backend anymore. GConf is dead. [mike.gabriel] python-x2go.spec: No need to run 2to3 at build time anymore. Python X2Go ------------------------------------------ [...truncated 50.71 KB...] [ 31s] bash-4.2-76.4 ######################################## [ 32s] python-base-2.7.9-21.3 ######################################## [ 32s] libdb-4_8-4.8.30-30.4 ######################################## [ 32s] libgomp1-5.2.1+r226025-4.2 ######################################## [ 32s] libpcre1-8.33-3.5 ######################################## [ 32s] libselinux1-2.3-3.5 ######################################## [ 32s] libpopt0-1.16-28.4 ######################################## [ 32s] libuuid1-2.25-7.2 ######################################## [ 32s] libblkid1-2.25-7.2 ######################################## [ 32s] libmount1-2.25-7.2 ######################################## [ 32s] python-ecdsa-0.13-3.2 ######################################## [ 32s] python-py-1.4.30-5.2 ######################################## [ 32s] python-greenlet-0.4.7-3.2 ######################################## [ 32s] python-xml-2.7.9-21.3 ######################################## [ 32s] python-pycrypto-2.6.1-4.1 ######################################## [ 32s] cpp-4.8-8.4 ######################################## [ 32s] bzip2-1.0.6-30.4 ######################################## [ 32s] xz-5.0.5-3.5 ######################################## [ 32s] libcrack2-2.9.0-5.4 ######################################## [ 32s] cracklib-2.9.0-5.4 ######################################## [ 32s] libzio1-1.00-11.4 ######################################## [ 32s] info-4.13a-39.4 ######################################## [ 32s] coreutils-8.22-4.1 ######################################## [ 32s] diffutils-3.3-7.1 ######################################## [ 33s] grep-2.16-4.1 ######################################## [ 33s] permissions-2014.08.26.1452-3.2 ######################################## [ 33s] Updating /etc/sysconfig/security... [ 33s] Warning: running kernel does not support fscaps [ 33s] Checking permissions and ownerships - using the permissions files [ 33s] /etc/permissions [ 33s] /etc/permissions.easy [ 33s] /etc/permissions.local [ 33s] setting /dev/full to root:root 0666. (wrong permissions 0622) [ 33s] setting /sbin/unix_chkpwd to root:shadow 4755. (wrong owner/group root:root) [ 33s] sed-4.2.2-6.1 ######################################## [ 33s] cpio-2.11-30.4 ######################################## [ 33s] pam-1.1.8-12.4 ######################################## [ 33s] Warning: running kernel does not support fscaps [ 33s] findutils-4.5.12-3.5 ######################################## [ 33s] gawk-4.1.3-4.5 ######################################## [ 33s] update-alternatives: using /usr/bin/gawk to provide /bin/awk (awk) in auto mode [ 34s] binutils-2.25.0-5.2 ######################################## [ 34s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode [ 34s] libutempter0-1.1.6-6.4 ######################################## [ 34s] Warning: running kernel does not support fscaps [ 35s] linux-glibc-devel-4.1-1.1 ######################################## [ 35s] glibc-devel-2.19-17.4 ######################################## [ 35s] systemd-rpm-macros-2.1-1.3 ######################################## [ 38s] glibc-locale-2.19-17.4 ######################################## [ 38s] gzip-1.6-9.4 ######################################## [ 38s] make-4.0-4.4 ######################################## [ 38s] which-2.20-5.4 ######################################## [ 38s] gettext-runtime-mini-0.19.2-3.6 ######################################## [ 39s] gettext-tools-mini-0.19.2-3.6 ######################################## [ 39s] tar-1.27.1-4.1 ######################################## [ 39s] ncurses-utils-5.9-53.4 ######################################## [ 39s] libncurses6-5.9-53.4 ######################################## [ 39s] libasan0-4.8.5-16.7 ######################################## [ 39s] libtsan0-5.2.1+r226025-4.2 ######################################## [ 39s] libopenssl1_0_0-1.0.1i-4.1 ######################################## [ 39s] libatomic1-5.2.1+r226025-4.2 ######################################## [ 39s] libcap-ng0-0.7.3-3.5 ######################################## [ 39s] libelf1-0.158-9.5 ######################################## [ 39s] libgdbm4-1.10-3.5 ######################################## [ 40s] perl-5.18.2-3.5 ######################################## [ 40s] libitm1-5.2.1+r226025-4.2 ######################################## [ 40s] gcc48-4.8.5-16.7 ######################################## [ 40s] gcc-4.8-8.4 ######################################## [ 40s] liblua5_1-5.1.5-11.4 ######################################## [ 40s] libsepol1-2.3-3.5 ######################################## [ 40s] libsmartcols1-2.25-7.2 ######################################## [ 40s] libsqlite3-0-3.8.10.2-5.2 ######################################## [ 40s] python-2.7.9-21.1 ######################################## [ 41s] libustr-1_0-1-1.0.4-34.4 ######################################## [ 41s] libsemanage1-2.3-3.5 ######################################## [ 41s] net-tools-1.60-766.4 ######################################## [ 41s] patch-2.7.5-5.5 ######################################## [ 41s] pkg-config-0.28-8.4 ######################################## [ 41s] insserv-compat-0.1-13.4 ######################################## [ 41s] util-linux-2.25-7.2 ######################################## [ 41s] Warning: running kernel does not support fscaps [ 41s] setting /usr/bin/wall to root:tty 2755. (wrong permissions 0755) [ 41s] setting /usr/bin/write to root:tty 2755. (wrong permissions 0755) [ 41s] Warning: running kernel does not support fscaps [ 41s] aaa_base-13.2+git20140911.61c1681-4.6 ######################################## [ 41s] Updating /etc/sysconfig/language... [ 41s] Updating /etc/sysconfig/backup... [ 41s] Updating /etc/sysconfig/proxy... [ 41s] Updating /etc/sysconfig/windowmanager... [ 41s] Updating /etc/sysconfig/news... [ 42s] Updating etc/passwd...unchanged [ 42s] Updating etc/group...unchanged [ 42s] Updating etc/shadow...unchanged [ 42s] aaa_base-malloccheck-13.2+git20140911.######################################## [ 42s] file-magic-5.19-5.5 ######################################## [ 42s] libmagic1-5.19-5.5 ######################################## [ 42s] rpm-4.11.2-6.2 ######################################## [ 42s] Updating /etc/sysconfig/services... [ 42s] rpmlint-mini-1.5-14.13 ######################################## [ 42s] file-5.19-5.5 ######################################## [ 42s] rpm-build-4.11.2-6.2 ######################################## [ 42s] rpmlint-Factory-1.0-89.1 ######################################## [ 42s] post-build-checks-13.2+git20140318.f24######################################## [ 43s] python-devel-2.7.9-21.3 ######################################## [ 43s] epydoc-3.0.1-76.1 ######################################## [ 43s] python-requests-2.7.0-5.1 ######################################## [ 43s] python-simplejson-3.3.1-3.2 ######################################## [ 43s] python-setuptools-18.0.1-2.2 ######################################## [ 43s] update-alternatives: using /usr/bin/easy_install-2.7 to provide /usr/bin/easy_install (easy_install) in auto mode [ 43s] brp-check-suse-13.2+git20150217.031533######################################## [ 43s] pam-modules-12.1-25.1 ######################################## [ 43s] Warning: running kernel does not support fscaps [ 43s] python-paramiko-1.15.2-2.2 ######################################## [ 43s] python-gevent-1.0.2-2.2 ######################################## [ 43s] m4-1.4.16-3.2 ######################################## [ 43s] python-xlib-0.14-110.2 ######################################## [ 43s] attr-2.4.47-5.4 ######################################## [ 43s] build-mkbaselibs-20150903-1.1 ######################################## [ 43s] fdupes-1.50-7.4 ######################################## [ 43s] removing nis flags from /var/cache/obs-build/opensuse/42.1/x86_64/etc/nsswitch.conf... [ 43s] now finalizing build dir... [ 44s] ----------------------------------------------------------------- [ 44s] ----- building python-x2go.spec (user abuild) [ 44s] ----------------------------------------------------------------- [ 44s] ----------------------------------------------------------------- [ 44s] + exec rpmbuild -bb --define '_srcdefattr (-,root,root)' --nosignature /home/abuild/rpmbuild/SOURCES/python-x2go.spec [ 44s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.oknzGd [ 44s] + umask 022 [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + rm -rf python-x2go-0.5.0.7 [ 44s] + /usr/bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python-x2go-0.5.0.7.tar.gz [ 44s] + /bin/tar -xf - [ 44s] + STATUS=0 [ 44s] + '[' 0 -ne 0 ']' [ 44s] + cd python-x2go-0.5.0.7 [ 44s] + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 44s] + find x2go -name '*.py' [ 44s] + xargs sed -i '1s|^#!/usr/bin/env python||' [ 44s] + exit 0 [ 44s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.YbgCX2 [ 44s] + umask 022 [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + /usr/bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.x86_64 [ 44s] ++ dirname /home/abuild/rpmbuild/BUILDROOT/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.x86_64 [ 44s] + /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT [ 44s] + /usr/bin/mkdir /home/abuild/rpmbuild/BUILDROOT/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.x86_64 [ 44s] + cd python-x2go-0.5.0.7 [ 44s] + /usr/bin/python setup.py build [ 44s] running build [ 44s] running build_py [ 44s] creating build [ 44s] creating build/lib [ 44s] creating build/lib/x2go [ 44s] copying ./x2go/xserver.py -> build/lib/x2go [ 44s] copying ./x2go/mimebox.py -> build/lib/x2go [ 44s] copying ./x2go/pulseaudio.py -> build/lib/x2go [ 44s] copying ./x2go/utils.py -> build/lib/x2go [ 44s] copying ./x2go/mimeboxactions.py -> build/lib/x2go [ 44s] copying ./x2go/__init__.py -> build/lib/x2go [ 44s] copying ./x2go/cleanup.py -> build/lib/x2go [ 44s] copying ./x2go/sshproxy.py -> build/lib/x2go [ 44s] copying ./x2go/guardian.py -> build/lib/x2go [ 44s] copying ./x2go/registry.py -> build/lib/x2go [ 44s] copying ./x2go/rforward.py -> build/lib/x2go [ 44s] copying ./x2go/inifiles.py -> build/lib/x2go [ 44s] copying ./x2go/sftpserver.py -> build/lib/x2go [ 44s] copying ./x2go/checkhosts.py -> build/lib/x2go [ 44s] copying ./x2go/printactions.py -> build/lib/x2go [ 44s] copying ./x2go/x2go_exceptions.py -> build/lib/x2go [ 44s] copying ./x2go/defaults.py -> build/lib/x2go [ 44s] copying ./x2go/client.py -> build/lib/x2go [ 44s] copying ./x2go/printqueue.py -> build/lib/x2go [ 44s] copying ./x2go/telekinesis.py -> build/lib/x2go [ 44s] copying ./x2go/gevent_subprocess.py -> build/lib/x2go [ 44s] copying ./x2go/forward.py -> build/lib/x2go [ 44s] copying ./x2go/_paramiko.py -> build/lib/x2go [ 44s] copying ./x2go/session.py -> build/lib/x2go [ 44s] copying ./x2go/log.py -> build/lib/x2go [ 44s] copying ./x2go/cache.py -> build/lib/x2go [ 44s] creating build/lib/x2go/tests [ 44s] copying ./x2go/tests/__init__.py -> build/lib/x2go/tests [ 44s] copying ./x2go/tests/test_printing.py -> build/lib/x2go/tests [ 44s] copying ./x2go/tests/runalltests.py -> build/lib/x2go/tests [ 44s] creating build/lib/x2go/backends [ 44s] copying ./x2go/backends/__init__.py -> build/lib/x2go/backends [ 44s] creating build/lib/x2go/backends/control [ 44s] copying ./x2go/backends/control/plain.py -> build/lib/x2go/backends/control [ 44s] copying ./x2go/backends/control/__init__.py -> build/lib/x2go/backends/control [ 44s] creating build/lib/x2go/backends/settings [ 44s] copying ./x2go/backends/settings/__init__.py -> build/lib/x2go/backends/settings [ 44s] copying ./x2go/backends/settings/winreg.py -> build/lib/x2go/backends/settings [ 44s] copying ./x2go/backends/settings/file.py -> build/lib/x2go/backends/settings [ 44s] creating build/lib/x2go/backends/printing [ 44s] copying ./x2go/backends/printing/__init__.py -> build/lib/x2go/backends/printing [ 44s] copying ./x2go/backends/printing/winreg.py -> build/lib/x2go/backends/printing [ 44s] copying ./x2go/backends/printing/file.py -> build/lib/x2go/backends/printing [ 44s] creating build/lib/x2go/backends/terminal [ 44s] copying ./x2go/backends/terminal/plain.py -> build/lib/x2go/backends/terminal [ 44s] copying ./x2go/backends/terminal/__init__.py -> build/lib/x2go/backends/terminal [ 44s] creating build/lib/x2go/backends/profiles [ 44s] copying ./x2go/backends/profiles/httpbroker.py -> build/lib/x2go/backends/profiles [ 44s] copying ./x2go/backends/profiles/__init__.py -> build/lib/x2go/backends/profiles [ 44s] copying ./x2go/backends/profiles/winreg.py -> build/lib/x2go/backends/profiles [ 44s] copying ./x2go/backends/profiles/base.py -> build/lib/x2go/backends/profiles [ 44s] copying ./x2go/backends/profiles/file.py -> build/lib/x2go/backends/profiles [ 44s] copying ./x2go/backends/profiles/sshbroker.py -> build/lib/x2go/backends/profiles [ 44s] creating build/lib/x2go/backends/proxy [ 44s] copying ./x2go/backends/proxy/__init__.py -> build/lib/x2go/backends/proxy [ 44s] copying ./x2go/backends/proxy/base.py -> build/lib/x2go/backends/proxy [ 44s] copying ./x2go/backends/proxy/nx3.py -> build/lib/x2go/backends/proxy [ 44s] creating build/lib/x2go/backends/info [ 44s] copying ./x2go/backends/info/plain.py -> build/lib/x2go/backends/info [ 44s] copying ./x2go/backends/info/__init__.py -> build/lib/x2go/backends/info [ 44s] + mkdir -p epydoc/html [ 44s] + epydoc --debug -n 'Python X2Go' -u http://www.x2go.org -v --html --no-private -o epydoc/html x2go/ [ 44s] [ [ 44s] +--------------------------------------------------------------------- [ 44s] | In /home/abuild/rpmbuild/BUILD/python-x2go-0.5.0.7/x2go/__init__.py: [ 44s] | No documentation available! [ 44s] | Error: Import failed: [ 44s] | ImportError: No module named builtins (line 192) [ 44s] | Error: Source code parsing failed: [ 44s] | Error during parsing: invalid syntax (/home/abuild/ [ 44s] | rpmbuild/BUILD/python-x2go-0.5.0.7/x2go/__init__.py, line [ 44s] | 201) -- Attempted relative import in non-package, or [ 44s] | beyond toplevel package [ 44s] | [ 44s] Error: Nothing left to document! [ 44s] error: Bad exit status from /var/tmp/rpm-tmp.YbgCX2 (%build) [ 44s] [ 44s] [ 44s] RPM build errors: [ 44s] Bad exit status from /var/tmp/rpm-tmp.YbgCX2 (%build) [ 44s] [ 44s] japsand failed "build python-x2go.spec" at Sun Sep 24 09:13:58 UTC 2017. [ 44s] + exit 1 + cleanup + '[' -n '' ']' + '[' -n '' ']' + echo 'Warning: mock temporary config directory not defined. Skipping cleanup.' Warning: mock temporary config directory not defined. Skipping cleanup. + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.g5zHab0b5nW7tX0iiLFIgFBg ']' + '[' -d /var/lib/jenkins/tmp/tmp.g5zHab0b5nW7tX0iiLFIgFBg ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.g5zHab0b5nW7tX0iiLFIgFBg Build step 'Execute shell' marked build as failure

1 7

Build failed in Jenkins: python-x2go+nightly+fedora-23 #16
by jenkins＠x2go.org 12 Jan '18

12 Jan '18

See <http://jenkins.x2go.org:8080/job/python-x2go+nightly+fedora-23/16/display/r…> Changes: [mike.gabriel] Port to Python3. [mike.gabriel] Bump upstream version to 0.5.99.0. [mike.gabriel] debian/python-x2go-doc.lintian-overrides: Add EOL at EOF. [mike.gabriel] debian/rules: Don't build API documentation twice. [mike.gabriel] Obviously, gevent from Python3 is quite critical towards circular import [mike.gabriel] x2go/xserver.py: whitespace fix at EOF. [mike.gabriel] Futurize: Re-add Python2 support back into python-x2go. [mike.gabriel] x2go/**.py: Add __package__ and __name__ definitions to all Python [mike.gabriel] backends: No need to ship a stub gconf backend anymore. GConf is dead. [mike.gabriel] python-x2go.spec: No need to run 2to3 at build time anymore. Python X2Go ------------------------------------------ [...truncated 119.26 KB...] + (( ++i )) + (( i < 8 )) + echo enabled=1 + (( ++i )) + (( i < 8 )) + echo protect=0 + (( ++i )) + (( i < 8 )) + echo '' + (( ++i )) + (( i < 8 )) + '[' full = full ']' + printf '\n' + typeset -i i=0 + (( i = 0 )) + (( i < 8 )) + echo '[x2go-nightly-fedora]' + (( ++i )) + (( i < 8 )) + echo 'name=Upstream X2Go Fedora Packages (Nightly Builds)' + (( ++i )) + (( i < 8 )) + echo baseurl=http://packages.x2go.org/fedora/23/heuler/x86_64 + (( ++i )) + (( i < 8 )) + echo gpgcheck=0 + (( ++i )) + (( i < 8 )) + echo gpgkey=http://packages.x2go.org/pub.key + (( ++i )) + (( i < 8 )) + echo enabled=1 + (( ++i )) + (( i < 8 )) + echo protect=0 + (( ++i )) + (( i < 8 )) + echo '' + (( ++i )) + (( i < 8 )) + echo '"""' + read line + IFS=' ' + cache_mock_config + typeset tmp_mock_config=/var/lib/jenkins/tmp/x2go-mock-CYbye7XUvofDUeGdccLywOsn/fedora-23-x86_64-x2go-nightly-full.v3EfXcp3WWepBBWi38f8KcdB.cfg + typeset 'tmp_regex=^.*\.cfg$' + [[ ! /var/lib/jenkins/tmp/x2go-mock-CYbye7XUvofDUeGdccLywOsn/fedora-23-x86_64-x2go-nightly-full.v3EfXcp3WWepBBWi38f8KcdB.cfg =~ ^.*\.cfg$ ]] + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-CYbye7XUvofDUeGdccLywOsn/fedora-23-x86_64-x2go-nightly-full.v3EfXcp3WWepBBWi38f8KcdB.cfg ']' + '[' '!' -r /var/lib/jenkins/tmp/x2go-mock-CYbye7XUvofDUeGdccLywOsn/fedora-23-x86_64-x2go-nightly-full.v3EfXcp3WWepBBWi38f8KcdB.cfg ']' ++ basename -s .cfg /var/lib/jenkins/tmp/x2go-mock-CYbye7XUvofDUeGdccLywOsn/fedora-23-x86_64-x2go-nightly-full.v3EfXcp3WWepBBWi38f8KcdB.cfg + typeset mock_cache_file_name=fedora-23-x86_64-x2go-nightly-full.v3EfXcp3WWepBBWi38f8KcdB + typeset tmp=fedora-23-x86_64-x2go-nightly-full.v3EfXcp3WWepBBWi38f8KcdB + mock_cache_file_name=fedora-23-x86_64-x2go-nightly-full + '[' fedora-23-x86_64-x2go-nightly-full = fedora-23-x86_64-x2go-nightly-full.v3EfXcp3WWepBBWi38f8KcdB ']' + mock_cache_file_name=fedora-23-x86_64-x2go-nightly-full.cfg + typeset mock_cache_file_path=/var/lib/jenkins/mock-cache//fedora-23-x86_64-x2go-nightly-full.cfg + '[' -f /var/lib/jenkins/mock-cache//fedora-23-x86_64-x2go-nightly-full.cfg ']' + '[' -r /var/lib/jenkins/mock-cache//fedora-23-x86_64-x2go-nightly-full.cfg ']' + cmp -s /var/lib/jenkins/tmp/x2go-mock-CYbye7XUvofDUeGdccLywOsn/fedora-23-x86_64-x2go-nightly-full.v3EfXcp3WWepBBWi38f8KcdB.cfg /var/lib/jenkins/mock-cache//fedora-23-x86_64-x2go-nightly-full.cfg + echo 'Cached mock config file matches generated one, using the cached file.' Cached mock config file matches generated one, using the cached file. + TMP_MOCK_CFG_FILE=/var/lib/jenkins/mock-cache//fedora-23-x86_64-x2go-nightly-full.cfg + return 0 + return 0 + MOCK_CHROOT_CONFIG='-r /var/lib/jenkins/mock-cache//fedora-23-x86_64-x2go-nightly-full' + '[' 0 -eq 0 ']' + MOCK_CHROOT_CONFIG='-r /var/lib/jenkins/mock-cache//fedora-23-x86_64-x2go-nightly-full.cfg' + return 0 + find /var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/23/SRPM/ -type f -iname 'python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.*.src.rpm' -print0 + read -r -d '' srpm + mock -r /var/lib/jenkins/mock-cache//fedora-23-x86_64-x2go-nightly-full.cfg --resultdir=/var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/23/x86_64 /var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/23/SRPM/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc23.src.rpm INFO: mock.py version 1.3.2-2 starting (python version = 3.5.3)... Start: init plugins INFO: selinux disabled Finish: init plugins Start: run INFO: Start(/var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/23/SRPM/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc23.src.rpm) Config(fedora-23-x86_64) Start: clean chroot Finish: clean chroot Start: chroot init INFO: calling preinit hooks INFO: enabled root cache Start: unpacking root cache Finish: unpacking root cache INFO: enabled yum cache Start: cleaning yum metadata Finish: cleaning yum metadata Mock Version: 1.3.2-2 INFO: Mock Version: 1.3.2-2 Start: yum update Finish: yum update Finish: chroot init Start: build phase for python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc23.src.rpm Start: build setup for python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc23.src.rpm Finish: build setup for python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc23.src.rpm Start: rpmbuild python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc23.src.rpm ERROR: Exception(/var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/23/SRPM/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc23.src.rpm) Config(fedora-23-x86_64) 8 minutes 6 seconds INFO: Results and/or logs in: /var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/23/x86_64 INFO: Cleaning up build root ('cleanup_on_failure=True') Start: clean chroot Finish: clean chroot ERROR: Command failed. See logs for output. # bash --login -c /usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec + cat /var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/23/x86_64/build.log Mock Version: 1.3.2-2 ENTER ['do'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec'], chrootPath='/var/lib/mock/fedora-23-x86_64/root'gid=999timeout=0user='mockbuild'uid=106env={'TERM': 'vt100', 'PS1': '<mock-chroot> \\s-\\v\\$ ', 'HOSTNAME': 'mock', 'HOME': '/builddir', 'LANG': 'en_US.UTF-8', 'SHELL': '/bin/bash', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"'}logger=<mockbuild.trace_decorator.getLog object at 0x7f2cf0c71668>shell=FalseprintOutput=False) Executing command: ['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec'] with env {'TERM': 'vt100', 'PS1': '<mock-chroot> \\s-\\v\\$ ', 'HOSTNAME': 'mock', 'HOME': '/builddir', 'LANG': 'en_US.UTF-8', 'SHELL': '/bin/bash', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"'} and shell False sh: /usr/bin/python: No such file or directory Building target platforms: x86_64 Building for target x86_64 Wrote: /builddir/build/SRPMS/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc23.src.rpm Child return code was: 0 ENTER ['do'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec'], chrootPath='/var/lib/mock/fedora-23-x86_64/root'gid=999timeout=0user='mockbuild'uid=106env={'TERM': 'vt100', 'PS1': '<mock-chroot> \\s-\\v\\$ ', 'HOSTNAME': 'mock', 'HOME': '/builddir', 'LANG': 'en_US.UTF-8', 'SHELL': '/bin/bash', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"'}logger=<mockbuild.trace_decorator.getLog object at 0x7f2cf0c71668>shell=FalseprintOutput=Falseprivate_network=True) Executing command: ['bash', '--login', '-c', '/usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec'] with env {'TERM': 'vt100', 'PS1': '<mock-chroot> \\s-\\v\\$ ', 'HOSTNAME': 'mock', 'HOME': '/builddir', 'LANG': 'en_US.UTF-8', 'SHELL': '/bin/bash', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"'} and shell False Building target platforms: x86_64 Building for target x86_64 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.WWHl8r + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf python-x2go-0.5.0.7 + /usr/bin/gzip -dc /builddir/build/SOURCES/python-x2go-0.5.0.7.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd python-x2go-0.5.0.7 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + find x2go -name '*.py' + xargs sed -i '1s|^#!/usr/bin/env python||' + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.TRkLGD + umask 022 + cd /builddir/build/BUILD + cd python-x2go-0.5.0.7 + /usr/bin/python setup.py build running build running build_py creating build creating build/lib creating build/lib/x2go copying ./x2go/xserver.py -> build/lib/x2go copying ./x2go/mimebox.py -> build/lib/x2go copying ./x2go/pulseaudio.py -> build/lib/x2go copying ./x2go/utils.py -> build/lib/x2go copying ./x2go/mimeboxactions.py -> build/lib/x2go copying ./x2go/__init__.py -> build/lib/x2go copying ./x2go/cleanup.py -> build/lib/x2go copying ./x2go/sshproxy.py -> build/lib/x2go copying ./x2go/guardian.py -> build/lib/x2go copying ./x2go/registry.py -> build/lib/x2go copying ./x2go/rforward.py -> build/lib/x2go copying ./x2go/inifiles.py -> build/lib/x2go copying ./x2go/sftpserver.py -> build/lib/x2go copying ./x2go/checkhosts.py -> build/lib/x2go copying ./x2go/printactions.py -> build/lib/x2go copying ./x2go/x2go_exceptions.py -> build/lib/x2go copying ./x2go/defaults.py -> build/lib/x2go copying ./x2go/client.py -> build/lib/x2go copying ./x2go/printqueue.py -> build/lib/x2go copying ./x2go/telekinesis.py -> build/lib/x2go copying ./x2go/gevent_subprocess.py -> build/lib/x2go copying ./x2go/forward.py -> build/lib/x2go copying ./x2go/_paramiko.py -> build/lib/x2go copying ./x2go/session.py -> build/lib/x2go copying ./x2go/log.py -> build/lib/x2go copying ./x2go/cache.py -> build/lib/x2go creating build/lib/x2go/tests copying ./x2go/tests/__init__.py -> build/lib/x2go/tests copying ./x2go/tests/test_printing.py -> build/lib/x2go/tests copying ./x2go/tests/runalltests.py -> build/lib/x2go/tests creating build/lib/x2go/backends copying ./x2go/backends/__init__.py -> build/lib/x2go/backends creating build/lib/x2go/backends/control copying ./x2go/backends/control/plain.py -> build/lib/x2go/backends/control copying ./x2go/backends/control/__init__.py -> build/lib/x2go/backends/control creating build/lib/x2go/backends/settings copying ./x2go/backends/settings/__init__.py -> build/lib/x2go/backends/settings copying ./x2go/backends/settings/winreg.py -> build/lib/x2go/backends/settings copying ./x2go/backends/settings/file.py -> build/lib/x2go/backends/settings creating build/lib/x2go/backends/printing copying ./x2go/backends/printing/__init__.py -> build/lib/x2go/backends/printing copying ./x2go/backends/printing/winreg.py -> build/lib/x2go/backends/printing copying ./x2go/backends/printing/file.py -> build/lib/x2go/backends/printing creating build/lib/x2go/backends/terminal copying ./x2go/backends/terminal/plain.py -> build/lib/x2go/backends/terminal copying ./x2go/backends/terminal/__init__.py -> build/lib/x2go/backends/terminal creating build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/httpbroker.py -> build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/__init__.py -> build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/winreg.py -> build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/base.py -> build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/file.py -> build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/sshbroker.py -> build/lib/x2go/backends/profiles creating build/lib/x2go/backends/proxy copying ./x2go/backends/proxy/__init__.py -> build/lib/x2go/backends/proxy copying ./x2go/backends/proxy/base.py -> build/lib/x2go/backends/proxy copying ./x2go/backends/proxy/nx3.py -> build/lib/x2go/backends/proxy creating build/lib/x2go/backends/info copying ./x2go/backends/info/plain.py -> build/lib/x2go/backends/info copying ./x2go/backends/info/__init__.py -> build/lib/x2go/backends/info + mkdir -p epydoc/html + epydoc --debug -n 'Python X2Go' -u http://www.x2go.org -v --html --no-private -o epydoc/html x2go/ [ +--------------------------------------------------------------------- | In /builddir/build/BUILD/python-x2go-0.5.0.7/x2go/__init__.py: | No documentation available! | Error: Import failed: | ImportError: No module named builtins (line 192) | Error: Source code parsing failed: | Error during parsing: invalid syntax (/builddir/build/ | BUILD/python-x2go-0.5.0.7/x2go/__init__.py, line 201) -- | Attempted relative import in non-package, or beyond | toplevel package | Error: Nothing left to document! error: Bad exit status from /var/tmp/rpm-tmp.TRkLGD (%build) Bad exit status from /var/tmp/rpm-tmp.TRkLGD (%build) RPM build errors: Child return code was: 1 EXCEPTION: [Error()] Traceback (most recent call last): File "/usr/lib/python3/dist-packages/mockbuild/trace_decorator.py", line 89, in trace result = func(*args, **kw) File "/usr/lib/python3/dist-packages/mockbuild/util.py", line 569, in do raise exception.Error("Command failed. See logs for output.\n # %s" % (command,), child.returncode) mockbuild.exception.Error: Command failed. See logs for output. # bash --login -c /usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec + exit 1 + cleanup + '[' -n /var/lib/jenkins/tmp/x2go-mock-CYbye7XUvofDUeGdccLywOsn ']' + '[' -e /var/lib/jenkins/tmp/x2go-mock-CYbye7XUvofDUeGdccLywOsn ']' + case "${TMP_MOCK_CFG_DIR}" in + typeset file= + for file in "${TMP_MOCK_CFG_DIR}/"* + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-CYbye7XUvofDUeGdccLywOsn/fedora-23-x86_64-x2go-nightly-full.v3EfXcp3WWepBBWi38f8KcdB.cfg ']' + rm -- /var/lib/jenkins/tmp/x2go-mock-CYbye7XUvofDUeGdccLywOsn/fedora-23-x86_64-x2go-nightly-full.v3EfXcp3WWepBBWi38f8KcdB.cfg + for file in "${TMP_MOCK_CFG_DIR}/"* + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-CYbye7XUvofDUeGdccLywOsn/fedora-23-x86_64-x2go-nightly-full.ZZvBn8LAtE3Am0ZKFoM0cEkz.cfg ']' + rm -- /var/lib/jenkins/tmp/x2go-mock-CYbye7XUvofDUeGdccLywOsn/fedora-23-x86_64-x2go-nightly-full.ZZvBn8LAtE3Am0ZKFoM0cEkz.cfg + '[' -e /var/lib/jenkins/tmp/x2go-mock-CYbye7XUvofDUeGdccLywOsn ']' + '[' -d /var/lib/jenkins/tmp/x2go-mock-CYbye7XUvofDUeGdccLywOsn ']' + rmdir -- /var/lib/jenkins/tmp/x2go-mock-CYbye7XUvofDUeGdccLywOsn + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.eawHi7fHcFlt3BGTt1ZxSHES ']' + '[' -d /var/lib/jenkins/tmp/tmp.eawHi7fHcFlt3BGTt1ZxSHES ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.eawHi7fHcFlt3BGTt1ZxSHES Build step 'Execute shell' marked build as failure

1 5

Build failed in Jenkins: python-x2go+nightly+opensuse-13.1 #43
by jenkins＠x2go.org 12 Jan '18

12 Jan '18

See <http://jenkins.x2go.org:8080/job/python-x2go+nightly+opensuse-13.1/43/displ…> Changes: [mike.gabriel] Port to Python3. [mike.gabriel] Bump upstream version to 0.5.99.0. [mike.gabriel] debian/python-x2go-doc.lintian-overrides: Add EOL at EOF. [mike.gabriel] debian/rules: Don't build API documentation twice. [mike.gabriel] Obviously, gevent from Python3 is quite critical towards circular import [mike.gabriel] x2go/xserver.py: whitespace fix at EOF. [mike.gabriel] Futurize: Re-add Python2 support back into python-x2go. [mike.gabriel] x2go/**.py: Add __package__ and __name__ definitions to all Python [mike.gabriel] backends: No need to ship a stub gconf backend anymore. GConf is dead. [mike.gabriel] python-x2go.spec: No need to run 2to3 at build time anymore. Python X2Go ------------------------------------------ [...truncated 51.14 KB...] [ 31s] libuuid1-2.23.2-3.1 ######################################## [ 31s] libblkid1-2.23.2-3.1 ######################################## [ 31s] libmount1-2.23.2-3.1 ######################################## [ 31s] libevent-2_0-5-2.0.21-2.1.2 ######################################## [ 31s] libzio1-1.00-8.1.2 ######################################## [ 31s] libasan0-4.8.1_20130909-3.2.1 ######################################## [ 31s] libtsan0-4.8.1_20130909-3.2.1 ######################################## [ 31s] libitm1-4.8.1_20130909-3.2.1 ######################################## [ 31s] insserv-compat-0.1-8.1.2 ######################################## [ 31s] libatomic1-4.8.1_20130909-3.2.1 ######################################## [ 31s] libelf1-0.155-6.1.20 ######################################## [ 32s] libgdbm4-1.10-7.1.2 ######################################## [ 32s] perl-5.18.1-2.1.11 ######################################## [ 32s] libgssglue1-0.4-2.1.2 ######################################## [ 32s] libtirpc1-0.2.3-1.1 ######################################## [ 32s] liblua5_1-5.1.5-5.2.1 ######################################## [ 32s] libsepol1-2.1.9-5.1.23 ######################################## [ 32s] libsqlite3-0-3.7.17-2.1.2 ######################################## [ 32s] libustr-1_0-1-1.0.4-29.1.2 ######################################## [ 32s] libsemanage1-2.1.10-3.1.20 ######################################## [ 32s] net-tools-1.60-763.1.2 ######################################## [ 32s] patch-2.7.1-4.1.2 ######################################## [ 32s] terminfo-base-5.9-33.1.2 ######################################## [ 32s] libncurses5-5.9-33.1.2 ######################################## [ 33s] libreadline6-6.2-68.1.5 ######################################## [ 33s] bash-4.2-68.1.5 ######################################## [ 33s] info-4.13a-36.1.2 ######################################## [ 33s] python-base-2.7.5-8.3.1 ######################################## [ 33s] coreutils-8.21-7.1.3 ######################################## [ 33s] python-2.7.5-8.3.1 ######################################## [ 33s] diffutils-3.3-3.1.2 ######################################## [ 33s] grep-2.14-5.1.2 ######################################## [ 34s] permissions-2013.08.22.1339-2.1.2 ######################################## [ 34s] Updating /etc/sysconfig/security... [ 34s] Warning: running kernel does not support fscaps [ 34s] Checking permissions and ownerships - using the permissions files [ 34s] /etc/permissions [ 34s] /etc/permissions.easy [ 34s] /etc/permissions.local [ 34s] setting /dev/full to root:root 0666. (wrong permissions 0622) [ 34s] setting /sbin/unix_chkpwd to root:shadow 4755. (wrong owner/group root:root) [ 34s] sed-4.2.2-2.1.2 ######################################## [ 34s] cpio-2.11-25.1.2 ######################################## [ 34s] findutils-4.5.12-1.1 ######################################## [ 34s] gawk-4.1.0-2.1.14 ######################################## [ 34s] update-alternatives: using /bin/gawk to provide /bin/awk (awk) in auto mode [ 35s] binutils-2.23.2-8.1.2 ######################################## [ 35s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode [ 35s] libutempter0-1.1.6-3.1.2 ######################################## [ 35s] Warning: running kernel does not support fscaps [ 35s] linux-glibc-devel-3.11-2.1.15 ######################################## [ 35s] glibc-devel-2.18-4.4.1 ######################################## [ 36s] gcc48-4.8.1_20130909-3.2.1 ######################################## [ 37s] glibc-locale-2.18-4.4.1 ######################################## [ 37s] python-greenlet-0.4.1-3.1.2 ######################################## [ 37s] python-pycrypto-2.6-3.1.2 ######################################## [ 37s] make-3.82-160.2.1 ######################################## [ 37s] tar-1.26-19.1.2 ######################################## [ 37s] which-2.20-2.1.2 ######################################## [ 37s] gettext-runtime-mini-0.18.3.1-1.1 ######################################## [ 38s] gettext-tools-mini-0.18.3.1-1.1 ######################################## [ 38s] gzip-1.6-4.2.2 ######################################## [ 38s] systemd-rpm-macros-2-6.1 ######################################## [ 38s] cpp-4.8-2.1.2 ######################################## [ 38s] gcc-4.8-2.1.2 ######################################## [ 38s] bzip2-1.0.6-26.1.21 ######################################## [ 38s] xz-5.0.5-2.1.20 ######################################## [ 38s] libcrack2-2.9.0-2.1.2 ######################################## [ 38s] cracklib-2.9.0-2.1.2 ######################################## [ 38s] pam-1.1.8-3.1 ######################################## [ 38s] Warning: running kernel does not support fscaps [ 38s] util-linux-2.23.2-3.1 ######################################## [ 38s] Warning: running kernel does not support fscaps [ 38s] setting /usr/bin/wall to root:tty 2755. (wrong permissions 0755) [ 38s] setting /usr/bin/write to root:tty 2755. (wrong permissions 0755) [ 38s] Warning: running kernel does not support fscaps [ 38s] Warning: running kernel does not support fscaps [ 38s] setting /usr/bin/eject to root:audio 4755. (wrong permissions 4750) [ 38s] aaa_base-13.1-16.17.1 ######################################## [ 39s] Updating /etc/sysconfig/language... [ 39s] Updating /etc/sysconfig/backup... [ 39s] Updating /etc/sysconfig/boot... [ 39s] Updating /etc/sysconfig/clock... [ 39s] Updating /etc/sysconfig/proxy... [ 39s] Updating /etc/sysconfig/windowmanager... [ 40s] Updating /etc/sysconfig/cron... [ 40s] Updating /etc/sysconfig/news... [ 40s] Updating /etc/sysconfig/shutdown... [ 40s] Updating etc/passwd...unchanged [ 40s] Updating etc/group...unchanged [ 40s] Updating etc/shadow...unchanged [ 40s] aaa_base-malloccheck-13.1-16.17.1 ######################################## [ 40s] file-magic-5.14-4.1.2 ######################################## [ 40s] libmagic1-5.14-4.1.2 ######################################## [ 40s] rpm-4.11.1-6.2.1 ######################################## [ 40s] Updating /etc/sysconfig/services... [ 41s] rpmlint-mini-1.5-2.2.5 ######################################## [ 41s] file-5.14-4.1.2 ######################################## [ 41s] rpm-build-4.11.1-6.2.1 ######################################## [ 41s] rpmlint-Factory-1.0-84.1.1 ######################################## [ 41s] post-build-checks-1.0-119.1.2 ######################################## [ 41s] pam-modules-12.1-20.1.2 ######################################## [ 41s] Warning: running kernel does not support fscaps [ 41s] python-paramiko-1.11.0-2.1.2 ######################################## [ 41s] python-gevent-0.13.8-4.1.2 ######################################## [ 41s] python-devel-2.7.5-8.3.1 ######################################## [ 41s] epydoc-3.0.1-73.1.2 ######################################## [ 41s] python-requests-1.2.3-4.1.2 ######################################## [ 41s] python-setuptools-0.9.8-3.1.2 ######################################## [ 41s] update-alternatives: using /usr/bin/easy_install-2.7 to provide /usr/bin/easy_install (easy_install) in auto mode [ 42s] python-simplejson-3.3.0-3.1.2 ######################################## [ 42s] python-xlib-0.14-105.1.2 ######################################## [ 42s] m4-1.4.16-14.1.2 ######################################## [ 42s] build-compare-2012.01.26-20.1.4 ######################################## [ 42s] brp-check-suse-1.0-59.1.2 ######################################## [ 42s] attr-2.4.47-2.1.2 ######################################## [ 42s] brp-extract-appdata-2012.02.13-16.3.1 ######################################## [ 42s] build-mkbaselibs-20131015-1.1 ######################################## [ 42s] fdupes-1.50-4.1.2 ######################################## [ 42s] removing nis flags from /var/cache/obs-build/opensuse/13.1/x86_64/etc/nsswitch.conf... [ 42s] now finalizing build dir... [ 42s] ----------------------------------------------------------------- [ 42s] ----- building python-x2go.spec (user abuild) [ 42s] ----------------------------------------------------------------- [ 42s] ----------------------------------------------------------------- [ 42s] + exec rpmbuild -bb --define '_srcdefattr (-,root,root)' --nosignature /home/abuild/rpmbuild/SOURCES/python-x2go.spec [ 42s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.rt1dVr [ 42s] + umask 022 [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + rm -rf python-x2go-0.5.0.7 [ 42s] + /usr/bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python-x2go-0.5.0.7.tar.gz [ 42s] + /bin/tar -xf - [ 42s] + STATUS=0 [ 42s] + '[' 0 -ne 0 ']' [ 42s] + cd python-x2go-0.5.0.7 [ 42s] + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 42s] + find x2go -name '*.py' [ 42s] + xargs sed -i '1s|^#!/usr/bin/env python||' [ 42s] + exit 0 [ 42s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.R10RQR [ 42s] + umask 022 [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + /usr/bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.x86_64 [ 42s] ++ dirname /home/abuild/rpmbuild/BUILDROOT/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.x86_64 [ 42s] + /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT [ 42s] + /usr/bin/mkdir /home/abuild/rpmbuild/BUILDROOT/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.x86_64 [ 42s] + cd python-x2go-0.5.0.7 [ 42s] + /usr/bin/python setup.py build [ 42s] running build [ 42s] running build_py [ 42s] creating build [ 42s] creating build/lib [ 42s] creating build/lib/x2go [ 42s] copying ./x2go/xserver.py -> build/lib/x2go [ 42s] copying ./x2go/mimebox.py -> build/lib/x2go [ 42s] copying ./x2go/pulseaudio.py -> build/lib/x2go [ 42s] copying ./x2go/utils.py -> build/lib/x2go [ 42s] copying ./x2go/mimeboxactions.py -> build/lib/x2go [ 42s] copying ./x2go/__init__.py -> build/lib/x2go [ 42s] copying ./x2go/cleanup.py -> build/lib/x2go [ 42s] copying ./x2go/sshproxy.py -> build/lib/x2go [ 42s] copying ./x2go/guardian.py -> build/lib/x2go [ 42s] copying ./x2go/registry.py -> build/lib/x2go [ 42s] copying ./x2go/rforward.py -> build/lib/x2go [ 42s] copying ./x2go/inifiles.py -> build/lib/x2go [ 42s] copying ./x2go/sftpserver.py -> build/lib/x2go [ 42s] copying ./x2go/checkhosts.py -> build/lib/x2go [ 42s] copying ./x2go/printactions.py -> build/lib/x2go [ 42s] copying ./x2go/x2go_exceptions.py -> build/lib/x2go [ 42s] copying ./x2go/defaults.py -> build/lib/x2go [ 42s] copying ./x2go/client.py -> build/lib/x2go [ 42s] copying ./x2go/printqueue.py -> build/lib/x2go [ 42s] copying ./x2go/telekinesis.py -> build/lib/x2go [ 42s] copying ./x2go/gevent_subprocess.py -> build/lib/x2go [ 42s] copying ./x2go/forward.py -> build/lib/x2go [ 42s] copying ./x2go/_paramiko.py -> build/lib/x2go [ 42s] copying ./x2go/session.py -> build/lib/x2go [ 42s] copying ./x2go/log.py -> build/lib/x2go [ 42s] copying ./x2go/cache.py -> build/lib/x2go [ 42s] creating build/lib/x2go/tests [ 42s] copying ./x2go/tests/__init__.py -> build/lib/x2go/tests [ 42s] copying ./x2go/tests/test_printing.py -> build/lib/x2go/tests [ 42s] copying ./x2go/tests/runalltests.py -> build/lib/x2go/tests [ 42s] creating build/lib/x2go/backends [ 42s] copying ./x2go/backends/__init__.py -> build/lib/x2go/backends [ 42s] creating build/lib/x2go/backends/control [ 42s] copying ./x2go/backends/control/plain.py -> build/lib/x2go/backends/control [ 42s] copying ./x2go/backends/control/__init__.py -> build/lib/x2go/backends/control [ 42s] creating build/lib/x2go/backends/settings [ 42s] copying ./x2go/backends/settings/__init__.py -> build/lib/x2go/backends/settings [ 42s] copying ./x2go/backends/settings/winreg.py -> build/lib/x2go/backends/settings [ 42s] copying ./x2go/backends/settings/file.py -> build/lib/x2go/backends/settings [ 42s] creating build/lib/x2go/backends/printing [ 42s] copying ./x2go/backends/printing/__init__.py -> build/lib/x2go/backends/printing [ 42s] copying ./x2go/backends/printing/winreg.py -> build/lib/x2go/backends/printing [ 42s] copying ./x2go/backends/printing/file.py -> build/lib/x2go/backends/printing [ 42s] creating build/lib/x2go/backends/terminal [ 42s] copying ./x2go/backends/terminal/plain.py -> build/lib/x2go/backends/terminal [ 42s] copying ./x2go/backends/terminal/__init__.py -> build/lib/x2go/backends/terminal [ 42s] creating build/lib/x2go/backends/profiles [ 42s] copying ./x2go/backends/profiles/httpbroker.py -> build/lib/x2go/backends/profiles [ 42s] copying ./x2go/backends/profiles/__init__.py -> build/lib/x2go/backends/profiles [ 42s] copying ./x2go/backends/profiles/winreg.py -> build/lib/x2go/backends/profiles [ 42s] copying ./x2go/backends/profiles/base.py -> build/lib/x2go/backends/profiles [ 42s] copying ./x2go/backends/profiles/file.py -> build/lib/x2go/backends/profiles [ 42s] copying ./x2go/backends/profiles/sshbroker.py -> build/lib/x2go/backends/profiles [ 42s] creating build/lib/x2go/backends/proxy [ 42s] copying ./x2go/backends/proxy/__init__.py -> build/lib/x2go/backends/proxy [ 42s] copying ./x2go/backends/proxy/base.py -> build/lib/x2go/backends/proxy [ 42s] copying ./x2go/backends/proxy/nx3.py -> build/lib/x2go/backends/proxy [ 42s] creating build/lib/x2go/backends/info [ 42s] copying ./x2go/backends/info/plain.py -> build/lib/x2go/backends/info [ 42s] copying ./x2go/backends/info/__init__.py -> build/lib/x2go/backends/info [ 42s] + mkdir -p epydoc/html [ 42s] + epydoc --debug -n 'Python X2Go' -u http://www.x2go.org -v --html --no-private -o epydoc/html x2go/ [ 42s] [ [ 42s] +--------------------------------------------------------------------- [ 42s] | In /home/abuild/rpmbuild/BUILD/python-x2go-0.5.0.7/x2go/__init__.py: [ 42s] | No documentation available! [ 42s] | Error: Import failed: [ 42s] | ImportError: No module named builtins (line 192) [ 42s] | Error: Source code parsing failed: [ 42s] | Error during parsing: invalid syntax (/home/abuild/ [ 42s] | rpmbuild/BUILD/python-x2go-0.5.0.7/x2go/__init__.py, line [ 42s] | 201) -- Attempted relative import in non-package, or [ 42s] | beyond toplevel package [ 42s] | [ 42s] Error: Nothing left to document! [ 43s] error: Bad exit status from /var/tmp/rpm-tmp.R10RQR (%build) [ 43s] [ 43s] [ 43s] RPM build errors: [ 43s] Bad exit status from /var/tmp/rpm-tmp.R10RQR (%build) [ 43s] [ 43s] japsand failed "build python-x2go.spec" at Sun Sep 24 09:05:45 UTC 2017. [ 43s] + exit 1 + cleanup + '[' -n '' ']' + '[' -n '' ']' + echo 'Warning: mock temporary config directory not defined. Skipping cleanup.' Warning: mock temporary config directory not defined. Skipping cleanup. + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.iyuWIgsEQzloFDZS9ZH9wtgg ']' + '[' -d /var/lib/jenkins/tmp/tmp.iyuWIgsEQzloFDZS9ZH9wtgg ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.iyuWIgsEQzloFDZS9ZH9wtgg Build step 'Execute shell' marked build as failure

1 5

Build failed in Jenkins: python-x2go+nightly+fedora-24 #11
by jenkins＠x2go.org 12 Jan '18

12 Jan '18

See <http://jenkins.x2go.org:8080/job/python-x2go+nightly+fedora-24/11/display/r…> Changes: [mike.gabriel] Port to Python3. [mike.gabriel] Bump upstream version to 0.5.99.0. [mike.gabriel] debian/python-x2go-doc.lintian-overrides: Add EOL at EOF. [mike.gabriel] debian/rules: Don't build API documentation twice. [mike.gabriel] Obviously, gevent from Python3 is quite critical towards circular import [mike.gabriel] x2go/xserver.py: whitespace fix at EOF. [mike.gabriel] Futurize: Re-add Python2 support back into python-x2go. [mike.gabriel] x2go/**.py: Add __package__ and __name__ definitions to all Python [mike.gabriel] backends: No need to ship a stub gconf backend anymore. GConf is dead. [mike.gabriel] python-x2go.spec: No need to run 2to3 at build time anymore. Python X2Go ------------------------------------------ [...truncated 119.89 KB...] + (( ++i )) + (( i < 8 )) + echo enabled=1 + (( ++i )) + (( i < 8 )) + echo protect=0 + (( ++i )) + (( i < 8 )) + echo '' + (( ++i )) + (( i < 8 )) + '[' full = full ']' + printf '\n' + typeset -i i=0 + (( i = 0 )) + (( i < 8 )) + echo '[x2go-nightly-fedora]' + (( ++i )) + (( i < 8 )) + echo 'name=Upstream X2Go Fedora Packages (Nightly Builds)' + (( ++i )) + (( i < 8 )) + echo baseurl=http://packages.x2go.org/fedora/24/heuler/x86_64 + (( ++i )) + (( i < 8 )) + echo gpgcheck=0 + (( ++i )) + (( i < 8 )) + echo gpgkey=http://packages.x2go.org/pub.key + (( ++i )) + (( i < 8 )) + echo enabled=1 + (( ++i )) + (( i < 8 )) + echo protect=0 + (( ++i )) + (( i < 8 )) + echo '' + (( ++i )) + (( i < 8 )) + echo '"""' + read line + IFS=' ' + cache_mock_config + typeset tmp_mock_config=/var/lib/jenkins/tmp/x2go-mock-o3UBpBqLsz88HuBo2Rv7EiK1/fedora-24-x86_64-x2go-nightly-full.8OJzzTVHKKnGwqwWKnJVjIyL.cfg + typeset 'tmp_regex=^.*\.cfg$' + [[ ! /var/lib/jenkins/tmp/x2go-mock-o3UBpBqLsz88HuBo2Rv7EiK1/fedora-24-x86_64-x2go-nightly-full.8OJzzTVHKKnGwqwWKnJVjIyL.cfg =~ ^.*\.cfg$ ]] + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-o3UBpBqLsz88HuBo2Rv7EiK1/fedora-24-x86_64-x2go-nightly-full.8OJzzTVHKKnGwqwWKnJVjIyL.cfg ']' + '[' '!' -r /var/lib/jenkins/tmp/x2go-mock-o3UBpBqLsz88HuBo2Rv7EiK1/fedora-24-x86_64-x2go-nightly-full.8OJzzTVHKKnGwqwWKnJVjIyL.cfg ']' ++ basename -s .cfg /var/lib/jenkins/tmp/x2go-mock-o3UBpBqLsz88HuBo2Rv7EiK1/fedora-24-x86_64-x2go-nightly-full.8OJzzTVHKKnGwqwWKnJVjIyL.cfg + typeset mock_cache_file_name=fedora-24-x86_64-x2go-nightly-full.8OJzzTVHKKnGwqwWKnJVjIyL + typeset tmp=fedora-24-x86_64-x2go-nightly-full.8OJzzTVHKKnGwqwWKnJVjIyL + mock_cache_file_name=fedora-24-x86_64-x2go-nightly-full + '[' fedora-24-x86_64-x2go-nightly-full = fedora-24-x86_64-x2go-nightly-full.8OJzzTVHKKnGwqwWKnJVjIyL ']' + mock_cache_file_name=fedora-24-x86_64-x2go-nightly-full.cfg + typeset mock_cache_file_path=/var/lib/jenkins/mock-cache//fedora-24-x86_64-x2go-nightly-full.cfg + '[' -f /var/lib/jenkins/mock-cache//fedora-24-x86_64-x2go-nightly-full.cfg ']' + '[' -r /var/lib/jenkins/mock-cache//fedora-24-x86_64-x2go-nightly-full.cfg ']' + cmp -s /var/lib/jenkins/tmp/x2go-mock-o3UBpBqLsz88HuBo2Rv7EiK1/fedora-24-x86_64-x2go-nightly-full.8OJzzTVHKKnGwqwWKnJVjIyL.cfg /var/lib/jenkins/mock-cache//fedora-24-x86_64-x2go-nightly-full.cfg + echo 'Cached mock config file matches generated one, using the cached file.' Cached mock config file matches generated one, using the cached file. + TMP_MOCK_CFG_FILE=/var/lib/jenkins/mock-cache//fedora-24-x86_64-x2go-nightly-full.cfg + return 0 + return 0 + MOCK_CHROOT_CONFIG='-r /var/lib/jenkins/mock-cache//fedora-24-x86_64-x2go-nightly-full' + '[' 0 -eq 0 ']' + MOCK_CHROOT_CONFIG='-r /var/lib/jenkins/mock-cache//fedora-24-x86_64-x2go-nightly-full.cfg' + return 0 + find /var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/24/SRPM/ -type f -iname 'python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.*.src.rpm' -print0 + read -r -d '' srpm + mock -r /var/lib/jenkins/mock-cache//fedora-24-x86_64-x2go-nightly-full.cfg --resultdir=/var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/24/x86_64 /var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/24/SRPM/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc24.src.rpm INFO: mock.py version 1.3.2-2 starting (python version = 3.5.3)... Start: init plugins INFO: selinux disabled Finish: init plugins Start: run INFO: Start(/var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/24/SRPM/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc24.src.rpm) Config(fedora-24-x86_64) Start: clean chroot Finish: clean chroot Start: chroot init INFO: calling preinit hooks INFO: enabled root cache Start: unpacking root cache Finish: unpacking root cache INFO: enabled yum cache Start: cleaning yum metadata Finish: cleaning yum metadata Mock Version: 1.3.2-2 INFO: Mock Version: 1.3.2-2 Start: yum update Finish: yum update Finish: chroot init Start: build phase for python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc24.src.rpm Start: build setup for python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc24.src.rpm Finish: build setup for python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc24.src.rpm Start: rpmbuild python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc24.src.rpm ERROR: Exception(/var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/24/SRPM/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc24.src.rpm) Config(fedora-24-x86_64) 11 minutes 18 seconds INFO: Results and/or logs in: /var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/24/x86_64 INFO: Cleaning up build root ('cleanup_on_failure=True') Start: clean chroot Finish: clean chroot ERROR: Command failed. See logs for output. # bash --login -c /usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec + cat /var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/24/x86_64/build.log Mock Version: 1.3.2-2 ENTER ['do'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec'], gid=999uid=106chrootPath='/var/lib/mock/fedora-24-x86_64/root'printOutput=Falseshell=Falseuser='mockbuild'logger=<mockbuild.trace_decorator.getLog object at 0x7f13b724f6a0>env={'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'HOME': '/builddir', 'PS1': '<mock-chroot> \\s-\\v\\$ ', 'HOSTNAME': 'mock', 'SHELL': '/bin/bash', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'TERM': 'vt100', 'LANG': 'en_US.UTF-8'}timeout=0) Executing command: ['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec'] with env {'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'HOME': '/builddir', 'PS1': '<mock-chroot> \\s-\\v\\$ ', 'HOSTNAME': 'mock', 'SHELL': '/bin/bash', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'TERM': 'vt100', 'LANG': 'en_US.UTF-8'} and shell False sh: /usr/bin/python: No such file or directory Building target platforms: x86_64 Building for target x86_64 Wrote: /builddir/build/SRPMS/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc24.src.rpm Child return code was: 0 ENTER ['do'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec'], gid=999logger=<mockbuild.trace_decorator.getLog object at 0x7f13b724f6a0>uid=106chrootPath='/var/lib/mock/fedora-24-x86_64/root'printOutput=Falseshell=Falseuser='mockbuild'private_network=Trueenv={'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'HOME': '/builddir', 'PS1': '<mock-chroot> \\s-\\v\\$ ', 'HOSTNAME': 'mock', 'SHELL': '/bin/bash', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'TERM': 'vt100', 'LANG': 'en_US.UTF-8'}timeout=0) Executing command: ['bash', '--login', '-c', '/usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec'] with env {'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'HOME': '/builddir', 'PS1': '<mock-chroot> \\s-\\v\\$ ', 'HOSTNAME': 'mock', 'SHELL': '/bin/bash', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'TERM': 'vt100', 'LANG': 'en_US.UTF-8'} and shell False Building target platforms: x86_64 Building for target x86_64 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.DBNMGZ + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf python-x2go-0.5.0.7 + /usr/bin/gzip -dc /builddir/build/SOURCES/python-x2go-0.5.0.7.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd python-x2go-0.5.0.7 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + find x2go -name '*.py' + xargs sed -i '1s|^#!/usr/bin/env python||' + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.80BZ0t + umask 022 + cd /builddir/build/BUILD + cd python-x2go-0.5.0.7 + /usr/bin/python setup.py build running build running build_py creating build creating build/lib creating build/lib/x2go copying ./x2go/xserver.py -> build/lib/x2go copying ./x2go/mimebox.py -> build/lib/x2go copying ./x2go/pulseaudio.py -> build/lib/x2go copying ./x2go/utils.py -> build/lib/x2go copying ./x2go/mimeboxactions.py -> build/lib/x2go copying ./x2go/__init__.py -> build/lib/x2go copying ./x2go/cleanup.py -> build/lib/x2go copying ./x2go/sshproxy.py -> build/lib/x2go copying ./x2go/guardian.py -> build/lib/x2go copying ./x2go/registry.py -> build/lib/x2go copying ./x2go/rforward.py -> build/lib/x2go copying ./x2go/inifiles.py -> build/lib/x2go copying ./x2go/sftpserver.py -> build/lib/x2go copying ./x2go/checkhosts.py -> build/lib/x2go copying ./x2go/printactions.py -> build/lib/x2go copying ./x2go/x2go_exceptions.py -> build/lib/x2go copying ./x2go/defaults.py -> build/lib/x2go copying ./x2go/client.py -> build/lib/x2go copying ./x2go/printqueue.py -> build/lib/x2go copying ./x2go/telekinesis.py -> build/lib/x2go copying ./x2go/gevent_subprocess.py -> build/lib/x2go copying ./x2go/forward.py -> build/lib/x2go copying ./x2go/_paramiko.py -> build/lib/x2go copying ./x2go/session.py -> build/lib/x2go copying ./x2go/log.py -> build/lib/x2go copying ./x2go/cache.py -> build/lib/x2go creating build/lib/x2go/tests copying ./x2go/tests/__init__.py -> build/lib/x2go/tests copying ./x2go/tests/test_printing.py -> build/lib/x2go/tests copying ./x2go/tests/runalltests.py -> build/lib/x2go/tests creating build/lib/x2go/backends copying ./x2go/backends/__init__.py -> build/lib/x2go/backends creating build/lib/x2go/backends/control copying ./x2go/backends/control/plain.py -> build/lib/x2go/backends/control copying ./x2go/backends/control/__init__.py -> build/lib/x2go/backends/control creating build/lib/x2go/backends/settings copying ./x2go/backends/settings/__init__.py -> build/lib/x2go/backends/settings copying ./x2go/backends/settings/winreg.py -> build/lib/x2go/backends/settings copying ./x2go/backends/settings/file.py -> build/lib/x2go/backends/settings creating build/lib/x2go/backends/printing copying ./x2go/backends/printing/__init__.py -> build/lib/x2go/backends/printing copying ./x2go/backends/printing/winreg.py -> build/lib/x2go/backends/printing copying ./x2go/backends/printing/file.py -> build/lib/x2go/backends/printing creating build/lib/x2go/backends/terminal copying ./x2go/backends/terminal/plain.py -> build/lib/x2go/backends/terminal copying ./x2go/backends/terminal/__init__.py -> build/lib/x2go/backends/terminal creating build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/httpbroker.py -> build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/__init__.py -> build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/winreg.py -> build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/base.py -> build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/file.py -> build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/sshbroker.py -> build/lib/x2go/backends/profiles creating build/lib/x2go/backends/proxy copying ./x2go/backends/proxy/__init__.py -> build/lib/x2go/backends/proxy copying ./x2go/backends/proxy/base.py -> build/lib/x2go/backends/proxy copying ./x2go/backends/proxy/nx3.py -> build/lib/x2go/backends/proxy creating build/lib/x2go/backends/info copying ./x2go/backends/info/plain.py -> build/lib/x2go/backends/info copying ./x2go/backends/info/__init__.py -> build/lib/x2go/backends/info + mkdir -p epydoc/html + epydoc --debug -n 'Python X2Go' -u http://www.x2go.org -v --html --no-private -o epydoc/html x2go/ [ +--------------------------------------------------------------------- | In /builddir/build/BUILD/python-x2go-0.5.0.7/x2go/__init__.py: | No documentation available! | Error: Import failed: | ImportError: No module named builtins (line 192) | Error: Source code parsing failed: | Error during parsing: invalid syntax (/builddir/build/ | BUILD/python-x2go-0.5.0.7/x2go/__init__.py, line 201) -- | Attempted relative import in non-package, or beyond | toplevel package | Error: Nothing left to document! RPM build errors: error: Bad exit status from /var/tmp/rpm-tmp.80BZ0t (%build) Bad exit status from /var/tmp/rpm-tmp.80BZ0t (%build) Child return code was: 1 EXCEPTION: [Error()] Traceback (most recent call last): File "/usr/lib/python3/dist-packages/mockbuild/trace_decorator.py", line 89, in trace result = func(*args, **kw) File "/usr/lib/python3/dist-packages/mockbuild/util.py", line 569, in do raise exception.Error("Command failed. See logs for output.\n # %s" % (command,), child.returncode) mockbuild.exception.Error: Command failed. See logs for output. # bash --login -c /usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec + exit 1 + cleanup + '[' -n /var/lib/jenkins/tmp/x2go-mock-o3UBpBqLsz88HuBo2Rv7EiK1 ']' + '[' -e /var/lib/jenkins/tmp/x2go-mock-o3UBpBqLsz88HuBo2Rv7EiK1 ']' + case "${TMP_MOCK_CFG_DIR}" in + typeset file= + for file in "${TMP_MOCK_CFG_DIR}/"* + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-o3UBpBqLsz88HuBo2Rv7EiK1/fedora-24-x86_64-x2go-nightly-full.8OJzzTVHKKnGwqwWKnJVjIyL.cfg ']' + rm -- /var/lib/jenkins/tmp/x2go-mock-o3UBpBqLsz88HuBo2Rv7EiK1/fedora-24-x86_64-x2go-nightly-full.8OJzzTVHKKnGwqwWKnJVjIyL.cfg + for file in "${TMP_MOCK_CFG_DIR}/"* + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-o3UBpBqLsz88HuBo2Rv7EiK1/fedora-24-x86_64-x2go-nightly-full.nd202PBhhkLWAj1hQqJeRUFD.cfg ']' + rm -- /var/lib/jenkins/tmp/x2go-mock-o3UBpBqLsz88HuBo2Rv7EiK1/fedora-24-x86_64-x2go-nightly-full.nd202PBhhkLWAj1hQqJeRUFD.cfg + '[' -e /var/lib/jenkins/tmp/x2go-mock-o3UBpBqLsz88HuBo2Rv7EiK1 ']' + '[' -d /var/lib/jenkins/tmp/x2go-mock-o3UBpBqLsz88HuBo2Rv7EiK1 ']' + rmdir -- /var/lib/jenkins/tmp/x2go-mock-o3UBpBqLsz88HuBo2Rv7EiK1 + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.9w3gpCYKxsfdhO3kAlw8anRH ']' + '[' -d /var/lib/jenkins/tmp/tmp.9w3gpCYKxsfdhO3kAlw8anRH ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.9w3gpCYKxsfdhO3kAlw8anRH Build step 'Execute shell' marked build as failure

1 6

Build failed in Jenkins: python-x2go+nightly+fedora-25 #12
by jenkins＠x2go.org 12 Jan '18

12 Jan '18

See <http://jenkins.x2go.org:8080/job/python-x2go+nightly+fedora-25/12/display/r…> Changes: [mike.gabriel] Port to Python3. [mike.gabriel] Bump upstream version to 0.5.99.0. [mike.gabriel] debian/python-x2go-doc.lintian-overrides: Add EOL at EOF. [mike.gabriel] debian/rules: Don't build API documentation twice. [mike.gabriel] Obviously, gevent from Python3 is quite critical towards circular import [mike.gabriel] x2go/xserver.py: whitespace fix at EOF. [mike.gabriel] Futurize: Re-add Python2 support back into python-x2go. [mike.gabriel] x2go/**.py: Add __package__ and __name__ definitions to all Python [mike.gabriel] backends: No need to ship a stub gconf backend anymore. GConf is dead. [mike.gabriel] python-x2go.spec: No need to run 2to3 at build time anymore. Python X2Go ------------------------------------------ [...truncated 119.83 KB...] + echo gpgkey=http://packages.x2go.org/pub.key + (( ++i )) + (( i < 8 )) + echo enabled=1 + (( ++i )) + (( i < 8 )) + echo protect=0 + (( ++i )) + (( i < 8 )) + echo '' + (( ++i )) + (( i < 8 )) + '[' full = full ']' + printf '\n' + typeset -i i=0 + (( i = 0 )) + (( i < 8 )) + echo '[x2go-nightly-fedora]' + (( ++i )) + (( i < 8 )) + echo 'name=Upstream X2Go Fedora Packages (Nightly Builds)' + (( ++i )) + (( i < 8 )) + echo baseurl=http://packages.x2go.org/fedora/25/heuler/x86_64 + (( ++i )) + (( i < 8 )) + echo gpgcheck=0 + (( ++i )) + (( i < 8 )) + echo gpgkey=http://packages.x2go.org/pub.key + (( ++i )) + (( i < 8 )) + echo enabled=1 + (( ++i )) + (( i < 8 )) + echo protect=0 + (( ++i )) + (( i < 8 )) + echo '' + (( ++i )) + (( i < 8 )) + echo '"""' + read line + IFS=' ' + cache_mock_config + typeset tmp_mock_config=/var/lib/jenkins/tmp/x2go-mock-8muORZcqdUfzTFASv4eQdSKy/fedora-25-x86_64-x2go-nightly-full.oRb0B2G349cokEPq81abwroA.cfg + typeset 'tmp_regex=^.*\.cfg$' + [[ ! /var/lib/jenkins/tmp/x2go-mock-8muORZcqdUfzTFASv4eQdSKy/fedora-25-x86_64-x2go-nightly-full.oRb0B2G349cokEPq81abwroA.cfg =~ ^.*\.cfg$ ]] + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-8muORZcqdUfzTFASv4eQdSKy/fedora-25-x86_64-x2go-nightly-full.oRb0B2G349cokEPq81abwroA.cfg ']' + '[' '!' -r /var/lib/jenkins/tmp/x2go-mock-8muORZcqdUfzTFASv4eQdSKy/fedora-25-x86_64-x2go-nightly-full.oRb0B2G349cokEPq81abwroA.cfg ']' ++ basename -s .cfg /var/lib/jenkins/tmp/x2go-mock-8muORZcqdUfzTFASv4eQdSKy/fedora-25-x86_64-x2go-nightly-full.oRb0B2G349cokEPq81abwroA.cfg + typeset mock_cache_file_name=fedora-25-x86_64-x2go-nightly-full.oRb0B2G349cokEPq81abwroA + typeset tmp=fedora-25-x86_64-x2go-nightly-full.oRb0B2G349cokEPq81abwroA + mock_cache_file_name=fedora-25-x86_64-x2go-nightly-full + '[' fedora-25-x86_64-x2go-nightly-full = fedora-25-x86_64-x2go-nightly-full.oRb0B2G349cokEPq81abwroA ']' + mock_cache_file_name=fedora-25-x86_64-x2go-nightly-full.cfg + typeset mock_cache_file_path=/var/lib/jenkins/mock-cache//fedora-25-x86_64-x2go-nightly-full.cfg + '[' -f /var/lib/jenkins/mock-cache//fedora-25-x86_64-x2go-nightly-full.cfg ']' + '[' -r /var/lib/jenkins/mock-cache//fedora-25-x86_64-x2go-nightly-full.cfg ']' + cmp -s /var/lib/jenkins/tmp/x2go-mock-8muORZcqdUfzTFASv4eQdSKy/fedora-25-x86_64-x2go-nightly-full.oRb0B2G349cokEPq81abwroA.cfg /var/lib/jenkins/mock-cache//fedora-25-x86_64-x2go-nightly-full.cfg + echo 'Cached mock config file matches generated one, using the cached file.' Cached mock config file matches generated one, using the cached file. + TMP_MOCK_CFG_FILE=/var/lib/jenkins/mock-cache//fedora-25-x86_64-x2go-nightly-full.cfg + return 0 + return 0 + MOCK_CHROOT_CONFIG='-r /var/lib/jenkins/mock-cache//fedora-25-x86_64-x2go-nightly-full' + '[' 0 -eq 0 ']' + MOCK_CHROOT_CONFIG='-r /var/lib/jenkins/mock-cache//fedora-25-x86_64-x2go-nightly-full.cfg' + return 0 + find /var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/25/SRPM/ -type f -iname 'python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.*.src.rpm' -print0 + read -r -d '' srpm + mock -r /var/lib/jenkins/mock-cache//fedora-25-x86_64-x2go-nightly-full.cfg --resultdir=/var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/25/x86_64 /var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/25/SRPM/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc25.src.rpm INFO: mock.py version 1.3.2-2 starting (python version = 3.5.3)... Start: init plugins INFO: selinux disabled Finish: init plugins Start: run INFO: Start(/var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/25/SRPM/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc25.src.rpm) Config(fedora-25-x86_64) Start: clean chroot Finish: clean chroot Start: chroot init INFO: calling preinit hooks INFO: enabled root cache Start: unpacking root cache Finish: unpacking root cache INFO: enabled yum cache Start: cleaning yum metadata Finish: cleaning yum metadata Mock Version: 1.3.2-2 INFO: Mock Version: 1.3.2-2 Start: yum update Finish: yum update Finish: chroot init Start: build phase for python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc25.src.rpm Start: build setup for python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc25.src.rpm Finish: build setup for python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc25.src.rpm Start: rpmbuild python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc25.src.rpm ERROR: Exception(/var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/25/SRPM/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc25.src.rpm) Config(fedora-25-x86_64) 1 minutes 34 seconds INFO: Results and/or logs in: /var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/25/x86_64 INFO: Cleaning up build root ('cleanup_on_failure=True') Start: clean chroot Finish: clean chroot ERROR: Command failed. See logs for output. # bash --login -c /usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec + cat /var/lib/jenkins/pkg-dist/heuler/python-x2go/fedora/25/x86_64/build.log Mock Version: 1.3.2-2 ENTER ['do'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec'], user='mockbuild'shell=Falsetimeout=0env={'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'TERM': 'vt100', 'HOSTNAME': 'mock', 'PS1': '<mock-chroot> \\s-\\v\\$ ', 'LANG': 'en_US.UTF-8', 'HOME': '/builddir', 'SHELL': '/bin/bash', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}uid=106gid=999printOutput=Falselogger=<mockbuild.trace_decorator.getLog object at 0x7f5d1a7ca668>chrootPath='/var/lib/mock/fedora-25-x86_64/root') Executing command: ['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec'] with env {'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'TERM': 'vt100', 'HOSTNAME': 'mock', 'PS1': '<mock-chroot> \\s-\\v\\$ ', 'LANG': 'en_US.UTF-8', 'HOME': '/builddir', 'SHELL': '/bin/bash', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'} and shell False Building target platforms: x86_64 Building for target x86_64 Wrote: /builddir/build/SRPMS/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.fc25.src.rpm Child return code was: 0 ENTER ['do'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec'], user='mockbuild'shell=Falsetimeout=0env={'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'TERM': 'vt100', 'HOSTNAME': 'mock', 'PS1': '<mock-chroot> \\s-\\v\\$ ', 'LANG': 'en_US.UTF-8', 'HOME': '/builddir', 'SHELL': '/bin/bash', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}private_network=Truegid=999printOutput=Falseuid=106logger=<mockbuild.trace_decorator.getLog object at 0x7f5d1a7ca668>chrootPath='/var/lib/mock/fedora-25-x86_64/root') Executing command: ['bash', '--login', '-c', '/usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec'] with env {'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'TERM': 'vt100', 'HOSTNAME': 'mock', 'PS1': '<mock-chroot> \\s-\\v\\$ ', 'LANG': 'en_US.UTF-8', 'HOME': '/builddir', 'SHELL': '/bin/bash', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'} and shell False Building target platforms: x86_64 Building for target x86_64 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.PPoZfi + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf python-x2go-0.5.0.7 + /usr/bin/gzip -dc /builddir/build/SOURCES/python-x2go-0.5.0.7.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd python-x2go-0.5.0.7 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + find x2go -name '*.py' + xargs sed -i '1s|^#!/usr/bin/env python||' + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.FyZjhG + umask 022 + cd /builddir/build/BUILD + cd python-x2go-0.5.0.7 + /usr/bin/python setup.py build running build running build_py creating build creating build/lib creating build/lib/x2go copying ./x2go/xserver.py -> build/lib/x2go copying ./x2go/mimebox.py -> build/lib/x2go copying ./x2go/pulseaudio.py -> build/lib/x2go copying ./x2go/utils.py -> build/lib/x2go copying ./x2go/mimeboxactions.py -> build/lib/x2go copying ./x2go/__init__.py -> build/lib/x2go copying ./x2go/cleanup.py -> build/lib/x2go copying ./x2go/sshproxy.py -> build/lib/x2go copying ./x2go/guardian.py -> build/lib/x2go copying ./x2go/registry.py -> build/lib/x2go copying ./x2go/rforward.py -> build/lib/x2go copying ./x2go/inifiles.py -> build/lib/x2go copying ./x2go/sftpserver.py -> build/lib/x2go copying ./x2go/checkhosts.py -> build/lib/x2go copying ./x2go/printactions.py -> build/lib/x2go copying ./x2go/x2go_exceptions.py -> build/lib/x2go copying ./x2go/defaults.py -> build/lib/x2go copying ./x2go/client.py -> build/lib/x2go copying ./x2go/printqueue.py -> build/lib/x2go copying ./x2go/telekinesis.py -> build/lib/x2go copying ./x2go/gevent_subprocess.py -> build/lib/x2go copying ./x2go/forward.py -> build/lib/x2go copying ./x2go/_paramiko.py -> build/lib/x2go copying ./x2go/session.py -> build/lib/x2go copying ./x2go/log.py -> build/lib/x2go copying ./x2go/cache.py -> build/lib/x2go creating build/lib/x2go/tests copying ./x2go/tests/__init__.py -> build/lib/x2go/tests copying ./x2go/tests/test_printing.py -> build/lib/x2go/tests copying ./x2go/tests/runalltests.py -> build/lib/x2go/tests creating build/lib/x2go/backends copying ./x2go/backends/__init__.py -> build/lib/x2go/backends creating build/lib/x2go/backends/control copying ./x2go/backends/control/plain.py -> build/lib/x2go/backends/control copying ./x2go/backends/control/__init__.py -> build/lib/x2go/backends/control creating build/lib/x2go/backends/settings copying ./x2go/backends/settings/__init__.py -> build/lib/x2go/backends/settings copying ./x2go/backends/settings/winreg.py -> build/lib/x2go/backends/settings copying ./x2go/backends/settings/file.py -> build/lib/x2go/backends/settings creating build/lib/x2go/backends/printing copying ./x2go/backends/printing/__init__.py -> build/lib/x2go/backends/printing copying ./x2go/backends/printing/winreg.py -> build/lib/x2go/backends/printing copying ./x2go/backends/printing/file.py -> build/lib/x2go/backends/printing creating build/lib/x2go/backends/terminal copying ./x2go/backends/terminal/plain.py -> build/lib/x2go/backends/terminal copying ./x2go/backends/terminal/__init__.py -> build/lib/x2go/backends/terminal creating build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/httpbroker.py -> build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/__init__.py -> build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/winreg.py -> build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/base.py -> build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/file.py -> build/lib/x2go/backends/profiles copying ./x2go/backends/profiles/sshbroker.py -> build/lib/x2go/backends/profiles creating build/lib/x2go/backends/proxy copying ./x2go/backends/proxy/__init__.py -> build/lib/x2go/backends/proxy copying ./x2go/backends/proxy/base.py -> build/lib/x2go/backends/proxy copying ./x2go/backends/proxy/nx3.py -> build/lib/x2go/backends/proxy creating build/lib/x2go/backends/info copying ./x2go/backends/info/plain.py -> build/lib/x2go/backends/info copying ./x2go/backends/info/__init__.py -> build/lib/x2go/backends/info + mkdir -p epydoc/html + epydoc --debug -n 'Python X2Go' -u http://www.x2go.org -v --html --no-private -o epydoc/html x2go/ [ +--------------------------------------------------------------------- | In /builddir/build/BUILD/python-x2go-0.5.0.7/x2go/__init__.py: | No documentation available! | Error: Import failed: | ImportError: No module named builtins (line 192) | Error: Source code parsing failed: | Error during parsing: invalid syntax (/builddir/build/ | BUILD/python-x2go-0.5.0.7/x2go/__init__.py, line 201) -- | Attempted relative import in non-package, or beyond | toplevel package | Error: Nothing left to document! RPM build errors: error: Bad exit status from /var/tmp/rpm-tmp.FyZjhG (%build) Bad exit status from /var/tmp/rpm-tmp.FyZjhG (%build) Child return code was: 1 EXCEPTION: [Error()] Traceback (most recent call last): File "/usr/lib/python3/dist-packages/mockbuild/trace_decorator.py", line 89, in trace result = func(*args, **kw) File "/usr/lib/python3/dist-packages/mockbuild/util.py", line 569, in do raise exception.Error("Command failed. See logs for output.\n # %s" % (command,), child.returncode) mockbuild.exception.Error: Command failed. See logs for output. # bash --login -c /usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/python-x2go.spec + exit 1 + cleanup + '[' -n /var/lib/jenkins/tmp/x2go-mock-8muORZcqdUfzTFASv4eQdSKy ']' + '[' -e /var/lib/jenkins/tmp/x2go-mock-8muORZcqdUfzTFASv4eQdSKy ']' + case "${TMP_MOCK_CFG_DIR}" in + typeset file= + for file in "${TMP_MOCK_CFG_DIR}/"* + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-8muORZcqdUfzTFASv4eQdSKy/fedora-25-x86_64-x2go-nightly-full.Jqyj3f1MU8bCXn1372jh5dKs.cfg ']' + rm -- /var/lib/jenkins/tmp/x2go-mock-8muORZcqdUfzTFASv4eQdSKy/fedora-25-x86_64-x2go-nightly-full.Jqyj3f1MU8bCXn1372jh5dKs.cfg + for file in "${TMP_MOCK_CFG_DIR}/"* + '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-8muORZcqdUfzTFASv4eQdSKy/fedora-25-x86_64-x2go-nightly-full.oRb0B2G349cokEPq81abwroA.cfg ']' + rm -- /var/lib/jenkins/tmp/x2go-mock-8muORZcqdUfzTFASv4eQdSKy/fedora-25-x86_64-x2go-nightly-full.oRb0B2G349cokEPq81abwroA.cfg + '[' -e /var/lib/jenkins/tmp/x2go-mock-8muORZcqdUfzTFASv4eQdSKy ']' + '[' -d /var/lib/jenkins/tmp/x2go-mock-8muORZcqdUfzTFASv4eQdSKy ']' + rmdir -- /var/lib/jenkins/tmp/x2go-mock-8muORZcqdUfzTFASv4eQdSKy + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.okyiqvd7phjcYl37eOElb5Ho ']' + '[' -d /var/lib/jenkins/tmp/tmp.okyiqvd7phjcYl37eOElb5Ho ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.okyiqvd7phjcYl37eOElb5Ho Build step 'Execute shell' marked build as failure

1 6

Build failed in Jenkins: python-x2go+nightly+opensuse-13.2 #30
by jenkins＠x2go.org 12 Jan '18

12 Jan '18

See <http://jenkins.x2go.org:8080/job/python-x2go+nightly+opensuse-13.2/30/displ…> Changes: [mike.gabriel] Port to Python3. [mike.gabriel] Bump upstream version to 0.5.99.0. [mike.gabriel] debian/python-x2go-doc.lintian-overrides: Add EOL at EOF. [mike.gabriel] debian/rules: Don't build API documentation twice. [mike.gabriel] Obviously, gevent from Python3 is quite critical towards circular import [mike.gabriel] x2go/xserver.py: whitespace fix at EOF. [mike.gabriel] Futurize: Re-add Python2 support back into python-x2go. [mike.gabriel] x2go/**.py: Add __package__ and __name__ definitions to all Python [mike.gabriel] backends: No need to ship a stub gconf backend anymore. GConf is dead. [mike.gabriel] python-x2go.spec: No need to run 2to3 at build time anymore. Python X2Go ------------------------------------------ [...truncated 50.84 KB...] [ 32s] bash-4.2-75.3.1 ######################################## [ 33s] python-base-2.7.8-1.2 ######################################## [ 33s] libdb-4_8-4.8.30-29.1.2 ######################################## [ 33s] libgomp1-4.8.3+r212056-2.2.4 ######################################## [ 33s] libpcre1-8.35-3.2.3 ######################################## [ 33s] libselinux1-2.3-2.2.5 ######################################## [ 33s] libpopt0-1.16-27.1.2 ######################################## [ 33s] libuuid1-2.25.1-2.4 ######################################## [ 33s] libblkid1-2.25.1-2.4 ######################################## [ 33s] libmount1-2.25.1-2.4 ######################################## [ 33s] python-ecdsa-0.11-1.2 ######################################## [ 33s] python-py-1.4.25-1.2 ######################################## [ 33s] python-greenlet-0.4.4-1.1 ######################################## [ 33s] python-xml-2.7.8-1.2 ######################################## [ 33s] python-pycrypto-2.6.1-3.1.4 ######################################## [ 33s] cpp-4.8-7.1.2 ######################################## [ 33s] bzip2-1.0.6-29.2.7 ######################################## [ 33s] xz-5.0.7-1.1 ######################################## [ 33s] libcrack2-2.9.0-4.1.3 ######################################## [ 33s] cracklib-2.9.0-4.1.3 ######################################## [ 33s] libzio1-1.00-10.1.2 ######################################## [ 33s] info-4.13a-38.1.2 ######################################## [ 33s] coreutils-8.23-2.3.1 ######################################## [ 33s] diffutils-3.3-6.1.2 ######################################## [ 33s] grep-2.20-2.1.2 ######################################## [ 33s] permissions-2014.08.26.1452-1.2 ######################################## [ 33s] Updating /etc/sysconfig/security... [ 34s] Warning: running kernel does not support fscaps [ 34s] Checking permissions and ownerships - using the permissions files [ 34s] /etc/permissions [ 34s] /etc/permissions.easy [ 34s] /etc/permissions.local [ 34s] setting /dev/full to root:root 0666. (wrong permissions 0622) [ 34s] setting /sbin/unix_chkpwd to root:shadow 4755. (wrong owner/group root:root) [ 34s] sed-4.2.2-5.1.2 ######################################## [ 34s] cpio-2.11-29.2.3 ######################################## [ 34s] pam-1.1.8-11.1.2 ######################################## [ 34s] Warning: running kernel does not support fscaps [ 34s] findutils-4.5.14-2.1.2 ######################################## [ 34s] gawk-4.1.1-3.1.2 ######################################## [ 34s] update-alternatives: using /usr/bin/gawk to provide /bin/awk (awk) in auto mode [ 35s] binutils-2.24-6.1.7 ######################################## [ 35s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode [ 35s] libutempter0-1.1.6-5.2.3 ######################################## [ 35s] Warning: running kernel does not support fscaps [ 35s] linux-glibc-devel-3.16-2.1.7 ######################################## [ 35s] glibc-devel-2.19-16.2.5 ######################################## [ 35s] systemd-rpm-macros-2-8.1.2 ######################################## [ 36s] glibc-locale-2.19-16.2.5 ######################################## [ 36s] gzip-1.6-8.1.8 ######################################## [ 36s] make-4.0-2.2.3 ######################################## [ 36s] tar-1.28-2.2.2 ######################################## [ 36s] which-2.20-4.1.2 ######################################## [ 36s] gettext-runtime-mini-0.19.2-2.1.3 ######################################## [ 36s] gettext-tools-mini-0.19.2-2.1.3 ######################################## [ 36s] libncurses6-5.9-52.2.3 ######################################## [ 36s] libasan0-4.8.3+r212056-2.2.4 ######################################## [ 36s] libtsan0-4.8.3+r212056-2.2.4 ######################################## [ 37s] libopenssl1_0_0-1.0.1i-2.1.4 ######################################## [ 37s] libatomic1-4.8.3+r212056-2.2.4 ######################################## [ 37s] libcap-ng0-0.7.4-3.1.2 ######################################## [ 37s] libelf1-0.158-4.2.6 ######################################## [ 37s] libgdbm4-1.11-3.1.2 ######################################## [ 37s] perl-5.20.1-1.3 ######################################## [ 37s] libitm1-4.8.3+r212056-2.2.4 ######################################## [ 38s] gcc48-4.8.3+r212056-2.2.4 ######################################## [ 38s] gcc-4.8-7.1.2 ######################################## [ 38s] liblua5_1-5.1.5-10.2.2 ######################################## [ 38s] libsepol1-2.3-2.1.8 ######################################## [ 38s] libsmartcols1-2.25.1-2.4 ######################################## [ 38s] libsqlite3-0-3.8.6-1.2 ######################################## [ 38s] python-2.7.8-1.1 ######################################## [ 38s] libustr-1_0-1-1.0.4-33.1.2 ######################################## [ 38s] libsemanage1-2.3-2.1.8 ######################################## [ 38s] net-tools-1.60-765.1.2 ######################################## [ 38s] patch-2.7.1-7.1.2 ######################################## [ 38s] insserv-compat-0.1-12.2.2 ######################################## [ 38s] util-linux-2.25.1-2.4 ######################################## [ 38s] Warning: running kernel does not support fscaps [ 38s] setting /usr/bin/wall to root:tty 2755. (wrong permissions 0755) [ 38s] setting /usr/bin/write to root:tty 2755. (wrong permissions 0755) [ 38s] Warning: running kernel does not support fscaps [ 38s] aaa_base-13.2+git20140911.61c1681-1.3 ######################################## [ 39s] Updating /etc/sysconfig/language... [ 39s] Updating /etc/sysconfig/backup... [ 39s] Updating /etc/sysconfig/proxy... [ 39s] Updating /etc/sysconfig/windowmanager... [ 39s] Updating /etc/sysconfig/news... [ 39s] Updating etc/passwd...unchanged [ 39s] Updating etc/group...unchanged [ 39s] Updating etc/shadow...unchanged [ 39s] aaa_base-malloccheck-13.2+git20140911.######################################## [ 39s] file-magic-5.19-3.1.2 ######################################## [ 39s] libmagic1-5.19-3.1.2 ######################################## [ 39s] rpm-4.11.3-1.2 ######################################## [ 39s] Updating /etc/sysconfig/services... [ 40s] rpmlint-mini-1.5-8.1.9 ######################################## [ 40s] file-5.19-3.1.2 ######################################## [ 40s] rpm-build-4.11.3-1.2 ######################################## [ 40s] rpmlint-Factory-1.0-88.1.2 ######################################## [ 40s] post-build-checks-13.2+git20140318.f24######################################## [ 40s] epydoc-3.0.1-75.1.4 ######################################## [ 40s] python-requests-2.4.1-1.3 ######################################## [ 40s] python-simplejson-3.5.2-2.1.4 ######################################## [ 40s] python-setuptools-5.4.1-2.1.4 ######################################## [ 40s] update-alternatives: using /usr/bin/easy_install-2.7 to provide /usr/bin/easy_install (easy_install) in auto mode [ 40s] python-devel-2.7.8-1.2 ######################################## [ 40s] brp-check-suse-13.2+git20140727.d76b99######################################## [ 40s] pam-modules-12.1-24.1.2 ######################################## [ 40s] Warning: running kernel does not support fscaps [ 40s] python-paramiko-1.13.1-2.1.4 ######################################## [ 41s] python-gevent-1.0-3.1.4 ######################################## [ 41s] m4-1.4.17-2.1.2 ######################################## [ 41s] python-xlib-0.14-107.1.4 ######################################## [ 41s] build-compare-2014.07.15-4.1.5 ######################################## [ 41s] attr-2.4.47-4.1.2 ######################################## [ 41s] brp-extract-appdata-2012.02.13-22.1.2 ######################################## [ 41s] build-mkbaselibs-20140424-2.1.3 ######################################## [ 41s] fdupes-1.50-6.1.2 ######################################## [ 41s] removing nis flags from /var/cache/obs-build/opensuse/13.2/x86_64/etc/nsswitch.conf... [ 41s] now finalizing build dir... [ 41s] ----------------------------------------------------------------- [ 41s] ----- building python-x2go.spec (user abuild) [ 41s] ----------------------------------------------------------------- [ 41s] ----------------------------------------------------------------- [ 41s] + exec rpmbuild -bb --define '_srcdefattr (-,root,root)' --nosignature /home/abuild/rpmbuild/SOURCES/python-x2go.spec [ 41s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.LEoVsF [ 41s] + umask 022 [ 41s] + cd /home/abuild/rpmbuild/BUILD [ 41s] + cd /home/abuild/rpmbuild/BUILD [ 41s] + rm -rf python-x2go-0.5.0.7 [ 41s] + /usr/bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python-x2go-0.5.0.7.tar.gz [ 41s] + /bin/tar -xf - [ 41s] + STATUS=0 [ 41s] + '[' 0 -ne 0 ']' [ 41s] + cd python-x2go-0.5.0.7 [ 41s] + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 41s] + find x2go -name '*.py' [ 41s] + xargs sed -i '1s|^#!/usr/bin/env python||' [ 41s] + exit 0 [ 41s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.btDv5v [ 41s] + umask 022 [ 41s] + cd /home/abuild/rpmbuild/BUILD [ 41s] + /usr/bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.x86_64 [ 41s] ++ dirname /home/abuild/rpmbuild/BUILDROOT/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.x86_64 [ 41s] + /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT [ 41s] + /usr/bin/mkdir /home/abuild/rpmbuild/BUILDROOT/python-x2go-0.5.0.7-0.0x2go1.0.git20170924.1349.heuler.x86_64 [ 41s] + cd python-x2go-0.5.0.7 [ 41s] + /usr/bin/python setup.py build [ 41s] running build [ 41s] running build_py [ 41s] creating build [ 41s] creating build/lib [ 41s] creating build/lib/x2go [ 41s] copying ./x2go/xserver.py -> build/lib/x2go [ 41s] copying ./x2go/mimebox.py -> build/lib/x2go [ 41s] copying ./x2go/pulseaudio.py -> build/lib/x2go [ 41s] copying ./x2go/utils.py -> build/lib/x2go [ 41s] copying ./x2go/mimeboxactions.py -> build/lib/x2go [ 41s] copying ./x2go/__init__.py -> build/lib/x2go [ 41s] copying ./x2go/cleanup.py -> build/lib/x2go [ 41s] copying ./x2go/sshproxy.py -> build/lib/x2go [ 41s] copying ./x2go/guardian.py -> build/lib/x2go [ 41s] copying ./x2go/registry.py -> build/lib/x2go [ 41s] copying ./x2go/rforward.py -> build/lib/x2go [ 41s] copying ./x2go/inifiles.py -> build/lib/x2go [ 41s] copying ./x2go/sftpserver.py -> build/lib/x2go [ 41s] copying ./x2go/checkhosts.py -> build/lib/x2go [ 41s] copying ./x2go/printactions.py -> build/lib/x2go [ 41s] copying ./x2go/x2go_exceptions.py -> build/lib/x2go [ 41s] copying ./x2go/defaults.py -> build/lib/x2go [ 41s] copying ./x2go/client.py -> build/lib/x2go [ 41s] copying ./x2go/printqueue.py -> build/lib/x2go [ 41s] copying ./x2go/telekinesis.py -> build/lib/x2go [ 41s] copying ./x2go/gevent_subprocess.py -> build/lib/x2go [ 41s] copying ./x2go/forward.py -> build/lib/x2go [ 41s] copying ./x2go/_paramiko.py -> build/lib/x2go [ 41s] copying ./x2go/session.py -> build/lib/x2go [ 41s] copying ./x2go/log.py -> build/lib/x2go [ 41s] copying ./x2go/cache.py -> build/lib/x2go [ 41s] creating build/lib/x2go/tests [ 41s] copying ./x2go/tests/__init__.py -> build/lib/x2go/tests [ 41s] copying ./x2go/tests/test_printing.py -> build/lib/x2go/tests [ 41s] copying ./x2go/tests/runalltests.py -> build/lib/x2go/tests [ 41s] creating build/lib/x2go/backends [ 41s] copying ./x2go/backends/__init__.py -> build/lib/x2go/backends [ 41s] creating build/lib/x2go/backends/control [ 41s] copying ./x2go/backends/control/plain.py -> build/lib/x2go/backends/control [ 41s] copying ./x2go/backends/control/__init__.py -> build/lib/x2go/backends/control [ 41s] creating build/lib/x2go/backends/settings [ 41s] copying ./x2go/backends/settings/__init__.py -> build/lib/x2go/backends/settings [ 41s] copying ./x2go/backends/settings/winreg.py -> build/lib/x2go/backends/settings [ 41s] copying ./x2go/backends/settings/file.py -> build/lib/x2go/backends/settings [ 41s] creating build/lib/x2go/backends/printing [ 41s] copying ./x2go/backends/printing/__init__.py -> build/lib/x2go/backends/printing [ 41s] copying ./x2go/backends/printing/winreg.py -> build/lib/x2go/backends/printing [ 41s] copying ./x2go/backends/printing/file.py -> build/lib/x2go/backends/printing [ 41s] creating build/lib/x2go/backends/terminal [ 41s] copying ./x2go/backends/terminal/plain.py -> build/lib/x2go/backends/terminal [ 41s] copying ./x2go/backends/terminal/__init__.py -> build/lib/x2go/backends/terminal [ 41s] creating build/lib/x2go/backends/profiles [ 41s] copying ./x2go/backends/profiles/httpbroker.py -> build/lib/x2go/backends/profiles [ 41s] copying ./x2go/backends/profiles/__init__.py -> build/lib/x2go/backends/profiles [ 41s] copying ./x2go/backends/profiles/winreg.py -> build/lib/x2go/backends/profiles [ 41s] copying ./x2go/backends/profiles/base.py -> build/lib/x2go/backends/profiles [ 41s] copying ./x2go/backends/profiles/file.py -> build/lib/x2go/backends/profiles [ 41s] copying ./x2go/backends/profiles/sshbroker.py -> build/lib/x2go/backends/profiles [ 41s] creating build/lib/x2go/backends/proxy [ 41s] copying ./x2go/backends/proxy/__init__.py -> build/lib/x2go/backends/proxy [ 41s] copying ./x2go/backends/proxy/base.py -> build/lib/x2go/backends/proxy [ 41s] copying ./x2go/backends/proxy/nx3.py -> build/lib/x2go/backends/proxy [ 41s] creating build/lib/x2go/backends/info [ 41s] copying ./x2go/backends/info/plain.py -> build/lib/x2go/backends/info [ 41s] copying ./x2go/backends/info/__init__.py -> build/lib/x2go/backends/info [ 41s] + mkdir -p epydoc/html [ 41s] + epydoc --debug -n 'Python X2Go' -u http://www.x2go.org -v --html --no-private -o epydoc/html x2go/ [ 41s] [ [ 41s] +--------------------------------------------------------------------- [ 41s] | In /home/abuild/rpmbuild/BUILD/python-x2go-0.5.0.7/x2go/__init__.py: [ 41s] | No documentation available! [ 41s] | Error: Import failed: [ 41s] | ImportError: No module named builtins (line 192) [ 41s] | Error: Source code parsing failed: [ 41s] | Error during parsing: invalid syntax (/home/abuild/ [ 41s] | rpmbuild/BUILD/python-x2go-0.5.0.7/x2go/__init__.py, line [ 41s] | 201) -- Attempted relative import in non-package, or [ 41s] | beyond toplevel package [ 41s] | [ 41s] Error: Nothing left to document! [ 41s] error: Bad exit status from /var/tmp/rpm-tmp.btDv5v (%build) [ 41s] [ 41s] [ 41s] RPM build errors: [ 41s] Bad exit status from /var/tmp/rpm-tmp.btDv5v (%build) [ 41s] [ 41s] japsand failed "build python-x2go.spec" at Sun Sep 24 09:08:01 UTC 2017. [ 41s] + exit 1 + cleanup + '[' -n '' ']' + '[' -n '' ']' + echo 'Warning: mock temporary config directory not defined. Skipping cleanup.' Warning: mock temporary config directory not defined. Skipping cleanup. + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.lDfwR0MMB62LptGwSe4LlExS ']' + '[' -d /var/lib/jenkins/tmp/tmp.lDfwR0MMB62LptGwSe4LlExS ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.lDfwR0MMB62LptGwSe4LlExS Build step 'Execute shell' marked build as failure

1 5

Build failed in Jenkins: python-x2go+nightly+debian-wheezy #116
by jenkins＠x2go.org 12 Jan '18

12 Jan '18

See <http://jenkins.x2go.org:8080/job/python-x2go+nightly+debian-wheezy/116/disp…> Changes: [mike.gabriel] Port to Python3. [mike.gabriel] Bump upstream version to 0.5.99.0. [mike.gabriel] debian/python-x2go-doc.lintian-overrides: Add EOL at EOF. [mike.gabriel] debian/rules: Don't build API documentation twice. [mike.gabriel] Obviously, gevent from Python3 is quite critical towards circular import [mike.gabriel] x2go/xserver.py: whitespace fix at EOF. [mike.gabriel] Futurize: Re-add Python2 support back into python-x2go. [mike.gabriel] x2go/**.py: Add __package__ and __name__ definitions to all Python [mike.gabriel] backends: No need to ship a stub gconf backend anymore. GConf is dead. [mike.gabriel] python-x2go.spec: No need to run 2to3 at build time anymore. Python X2Go ------------------------------------------ [...truncated 22.55 KB...] Reading state information... Initializing package states... Writing extended state information... The following NEW packages will be installed: sbuild-build-depends-core-dummy 0 packages upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 716 B of archives. After unpacking 0 B will be used. Writing extended state information... Get: 1 copy:/<<BUILDDIR>>/resolver-4D2moR/apt_archive/ ./ sbuild-build-depends-core-dummy 0.invalid.0 [716 B] Fetched 716 B in 0s (4693 B/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sbuild-build-depends-core-dummy. (Reading database ... 11214 files and directories currently installed.) Unpacking sbuild-build-depends-core-dummy (from .../sbuild-build-depends-core-dummy_0.invalid.0_amd64.deb) ... Setting up sbuild-build-depends-core-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in all) +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: cdbs, debhelper (>= 9~), python3, python3-setuptools, python3-gevent, python3-paramiko, python3-xlib, python-epydoc, dh-python, locales Filtered Build-Depends: cdbs, debhelper (>= 9~), python3, python3-setuptools, python3-gevent, python3-paramiko, python3-xlib, python-epydoc, dh-python, locales dpkg-deb: building package `sbuild-build-depends-python-x2go-dummy' in `/<<BUILDDIR>>/resolver-4D2moR/apt_archive/sbuild-build-depends-python-x2go-dummy.deb'. dpkg-scanpackages: warning: Packages in archive but missing from override file: dpkg-scanpackages: warning: sbuild-build-depends-core-dummy sbuild-build-depends-python-x2go-dummy dpkg-scanpackages: info: Wrote 2 entries to output Packages file. Get:1 copy: ./ Release.gpg [316 B] Get:2 copy: ./ Release [963 B] Get:3 copy: ./ Sources [552 B] Get:4 copy: ./ Packages [630 B] Fetched 2461 B in 0s (4160 B/s) Reading package lists... Hit http://packages.x2go.org wheezy Release.gpg Hit http://packages.x2go.org wheezy Release Hit http://packages.x2go.org wheezy/main amd64 Packages Hit http://packages.x2go.org wheezy/heuler amd64 Packages Reading package lists... Reading package lists... +------------------------------------------------------------------------------+ | Install python-x2go build dependencies (aptitude-based resolver) | +------------------------------------------------------------------------------+ Reading package lists... Building dependency tree... Reading state information... aptitude is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. aptitude -y --without-recommends -o Dpkg::Options::=--force-confold -o Aptitude::CmdLine::Ignore-Trust-Violations=false -o Aptitude::ProblemResolver::StepScore=100 -o Aptitude::ProblemResolver::SolutionCost=safety, priority, non-default-versions -o Aptitude::ProblemResolver::Hints::KeepDummy=reject sbuild-build-depends-python-x2go-dummy :UNINST -o Aptitude::ProblemResolver::Keep-All-Level=55000 -o Aptitude::ProblemResolver::Remove-Essential-Level=maximum install sbuild-build-depends-python-x2go-dummy:amd64 Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... The following NEW packages will be installed: bsdmainutils{a} cdbs{a} debhelper{a} file{a} gettext{a} gettext-base{a} groff-base{a} html2text{a} intltool-debian{a} libasprintf0c2{a} libcroco3{a} libexpat1{a} libffi5{a} libgettextpo0{a} libglib2.0-0{a} libmagic1{a} libpcre3{a} libpipeline1{a} libssl1.0.0{a} libunistring0{a} libxml2{a} man-db{a} mime-support{a} po-debconf{a} python3{a} python3-minimal{a} python3-pkg-resources{a} python3-setuptools{a} python3.2{a} python3.2-minimal{a} sbuild-build-depends-python-x2go-dummy{b} 0 packages upgraded, 31 newly installed, 0 to remove and 0 not upgraded. Need to get 16.1 MB of archives. After unpacking 45.4 MB will be used. The following packages have unmet dependencies: sbuild-build-depends-python-x2go-dummy : Depends: python3-gevent which is a virtual package. Depends: python3-paramiko but it is not going to be installed. Depends: python3-xlib which is a virtual package. Depends: python-epydoc but it is not going to be installed. Depends: dh-python but it is not going to be installed. Depends: locales but it is not going to be installed. Unable to resolve dependencies! Giving up... The following NEW packages will be installed: bsdmainutils{a} cdbs{a} debhelper{a} file{a} gettext{a} gettext-base{a} groff-base{a} html2text{a} intltool-debian{a} libasprintf0c2{a} libcroco3{a} libexpat1{a} libffi5{a} libgettextpo0{a} libglib2.0-0{a} libmagic1{a} libpcre3{a} libpipeline1{a} libssl1.0.0{a} libunistring0{a} libxml2{a} man-db{a} mime-support{a} po-debconf{a} python3{a} python3-minimal{a} python3-pkg-resources{a} python3-setuptools{a} python3.2{a} python3.2-minimal{a} sbuild-build-depends-python-x2go-dummy{b} 0 packages upgraded, 31 newly installed, 0 to remove and 0 not upgraded. Need to get 16.1 MB of archives. After unpacking 45.4 MB will be used. Abort. Not removing installed packages: cloned chroot in use du: cannot access `/<<PKGBUILDDIR>>': No such file or directory E: read_command failed to execute du E: Cannot determine space needed for /<<PKGBUILDDIR>> (du failed) Reading package lists... Building dependency tree... Reading state information... MarkInstall sbuild-build-depends-python-x2go-dummy [ amd64 ] < none -> 0.invalid.0 > ( none ) FU=1 Installing cdbs as Depends of sbuild-build-depends-python-x2go-dummy MarkInstall cdbs [ amd64 ] < none -> 0.4.115+deb7u1 > ( devel ) FU=0 Installing debhelper as Depends of sbuild-build-depends-python-x2go-dummy MarkInstall debhelper [ amd64 ] < none -> 9.20120909 > ( devel ) FU=0 Installing file as Depends of debhelper MarkInstall file [ amd64 ] < none -> 5.11-2+deb7u8 > ( utils ) FU=0 Installing libmagic1 as Depends of file MarkInstall libmagic1 [ amd64 ] < none -> 5.11-2+deb7u8 > ( libs ) FU=0 Installing html2text as Depends of debhelper MarkInstall html2text [ amd64 ] < none -> 1.3.2a-15 > ( web ) FU=0 Installing po-debconf as Depends of debhelper MarkInstall po-debconf [ amd64 ] < none -> 1.0.16+nmu2 > ( devel ) FU=0 Installing gettext as Depends of po-debconf MarkInstall gettext [ amd64 ] < none -> 0.18.1.1-9 > ( devel ) FU=0 Installing libcroco3 as Depends of gettext MarkInstall libcroco3 [ amd64 ] < none -> 0.6.6-2 > ( libs ) FU=0 Installing libglib2.0-0 as Depends of libcroco3 MarkInstall libglib2.0-0 [ amd64 ] < none -> 2.33.12+really2.32.4-5 > ( libs ) FU=0 Installing libffi5 as Depends of libglib2.0-0 MarkInstall libffi5 [ amd64 ] < none -> 3.0.10-3 > ( libs ) FU=0 Installing libpcre3 as Depends of libglib2.0-0 MarkInstall libpcre3 [ amd64 ] < none -> 1:8.30-5 > ( libs ) FU=0 Installing libxml2 as Depends of libcroco3 MarkInstall libxml2 [ amd64 ] < none -> 2.8.0+dfsg1-7+wheezy5 > ( libs ) FU=0 Installing libunistring0 as Depends of gettext MarkInstall libunistring0 [ amd64 ] < none -> 0.9.3-5 > ( libs ) FU=0 Installing libgettextpo0 as Depends of gettext MarkInstall libgettextpo0 [ amd64 ] < none -> 0.18.1.1-9 > ( libs ) FU=0 Installing libasprintf0c2 as Depends of gettext MarkInstall libasprintf0c2 [ amd64 ] < none -> 0.18.1.1-9 > ( libs ) FU=0 Installing gettext-base as Depends of gettext MarkInstall gettext-base [ amd64 ] < none -> 0.18.1.1-9 > ( utils ) FU=0 Installing intltool-debian as Depends of po-debconf MarkInstall intltool-debian [ amd64 ] < none -> 0.35.0+20060710.1 > ( devel ) FU=0 Installing man-db as Depends of debhelper MarkInstall man-db [ amd64 ] < none -> 2.6.2-1 > ( doc ) FU=0 Installing groff-base as Depends of man-db MarkInstall groff-base [ amd64 ] < none -> 1.21-9 > ( text ) FU=0 Installing bsdmainutils as Depends of man-db MarkInstall bsdmainutils [ amd64 ] < none -> 9.0.3 > ( utils ) FU=0 Installing libpipeline1 as Depends of man-db MarkInstall libpipeline1 [ amd64 ] < none -> 1.2.1-1 > ( libs ) FU=0 Installing python3 as Depends of sbuild-build-depends-python-x2go-dummy MarkInstall python3 [ amd64 ] < none -> 3.2.3-6 > ( python ) FU=0 Installing python3.2 as Depends of python3 MarkInstall python3.2 [ amd64 ] < none -> 3.2.3-7 > ( python ) FU=0 Installing python3.2-minimal as Depends of python3.2 MarkInstall python3.2-minimal [ amd64 ] < none -> 3.2.3-7 > ( python ) FU=0 Installing libexpat1 as Depends of python3.2-minimal MarkInstall libexpat1 [ amd64 ] < none -> 2.1.0-1+deb7u2 > ( libs ) FU=0 Installing mime-support as Depends of python3.2 MarkInstall mime-support [ amd64 ] < none -> 3.52-1+deb7u1 > ( net ) FU=0 Installing libssl1.0.0 as Depends of python3.2 MarkInstall libssl1.0.0 [ amd64 ] < none -> 1.0.1e-2+deb7u20 > ( libs ) FU=0 Installing python3-minimal as Depends of python3 MarkInstall python3-minimal [ amd64 ] < none -> 3.2.3-6 > ( python ) FU=0 Installing python3-setuptools as Depends of sbuild-build-depends-python-x2go-dummy MarkInstall python3-setuptools [ amd64 ] < none -> 0.6.24-1 > ( python ) FU=0 Installing python3-pkg-resources as Depends of python3-setuptools MarkInstall python3-pkg-resources [ amd64 ] < none -> 0.6.24-1 > ( python ) FU=0 sbuild-build-depends-python-x2go-dummy:amd64 Depends on python3-gevent [ amd64 ] < none > ( none ) can't be satisfied! Ignore MarkDelete of sbuild-build-depends-python-x2go-dummy [ amd64 ] < none -> 0.invalid.0 > ( none ) as its mode (Install) is protected Starting Starting 2 Investigating (0) sbuild-build-depends-python-x2go-dummy [ amd64 ] < none -> 0.invalid.0 > ( none ) Broken sbuild-build-depends-python-x2go-dummy:amd64 Depends on python3-gevent [ amd64 ] < none > ( none ) Broken sbuild-build-depends-python-x2go-dummy:amd64 Depends on python3-paramiko [ amd64 ] < none -> 1.15.1-1~0deb70+x2go1 > ( python ) Considering python3-paramiko:amd64 1 as a solution to sbuild-build-depends-python-x2go-dummy:amd64 10000 Re-Instated python3-crypto:amd64 Re-Instated python3-six:amd64 Re-Instated python3-ecdsa:amd64 Re-Instated python3-paramiko:amd64 Broken sbuild-build-depends-python-x2go-dummy:amd64 Depends on python3-xlib [ amd64 ] < none > ( none ) Broken sbuild-build-depends-python-x2go-dummy:amd64 Depends on python-epydoc [ amd64 ] < none -> 3.0.1+dfsg-1 > ( python ) Considering python-epydoc:amd64 1 as a solution to sbuild-build-depends-python-x2go-dummy:amd64 10000 Re-Instated python2.7-minimal:amd64 Re-Instated python2.7:amd64 Re-Instated python-minimal:amd64 Re-Instated python:amd64 Re-Instated python-epydoc:amd64 Broken sbuild-build-depends-python-x2go-dummy:amd64 Depends on dh-python [ amd64 ] < none -> 1.20140511-1~bpo70+1~0deb70+x2go1 > ( python ) Considering dh-python:amd64 1 as a solution to sbuild-build-depends-python-x2go-dummy:amd64 10000 Re-Instated dh-python:amd64 Broken sbuild-build-depends-python-x2go-dummy:amd64 Depends on locales [ amd64 ] < none -> 2.13-38+deb7u10 > ( localization ) Considering locales:amd64 1 as a solution to sbuild-build-depends-python-x2go-dummy:amd64 10000 Re-Instated locales:amd64 Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: sbuild-build-depends-python-x2go-dummy : Depends: python3-gevent but it is not installable Depends: python3-xlib but it is not installable E: Unable to correct problems, you have held broken packages. apt-get failed. +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<<BUILDDIR>> Not cleaning session: cloned chroot in use E: Package build dependencies not satisfied; skipping +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: full Build-Space: n/a Build-Time: 0 Distribution: wheezy Fail-Stage: install-deps Host Architecture: amd64 Install-Time: 0 Job: /home/_jenkins_/tmp/tmp.hiTo7Jtp9jh8I1aR6jKideFh/python-x2go_0.5.99.0-0x2go1~git20170924.1349+7.heuler.1.dsc Machine Architecture: amd64 Package: python-x2go Package-Time: 0 Source-Version: 0.5.99.0-0x2go1~git20170924.1349+7.heuler.1 Space: n/a Status: given-back Version: 0.5.99.0-0x2go1~git20170924.1349+7.heuler.1 -------------------------------------------------------------------------------- Finished at 2017-09-24T08:55:17Z Build needed 00:00:00, no disk space E: Package build dependencies not satisfied; skipping + cleanup + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n '' ']' + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.hiTo7Jtp9jh8I1aR6jKideFh ']' + '[' -d /var/lib/jenkins/tmp/tmp.hiTo7Jtp9jh8I1aR6jKideFh ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.hiTo7Jtp9jh8I1aR6jKideFh Build step 'Execute shell' marked build as failure

1 5

Build failed in Jenkins: pyhoca-cli+nightly+opensuse-42.1 #10
by jenkins＠x2go.org 08 Dec '17

08 Dec '17

See <http://jenkins.x2go.org:8080/job/pyhoca-cli+nightly+opensuse-42.1/10/displa…> Changes: [mike.gabriel] Port to Python3. [mike.gabriel] debian/{control,compat}: Bump to DH version level 9. [mike.gabriel] debian/control: Bump versioned D (pyhoca-cli): python-x2go (>= [mike.gabriel] debian/control: White-space fix. [mike.gabriel] debian/control: Switch to python3-* dependencies. [mike.gabriel] debian/control: Fix src:pkg header part. [mike.gabriel] debian/rules: Build for Python3, not Python2. [mike.gabriel] Bump upstream version to 0.5.99.0. [mike.gabriel] debian/changelog: Update from Git history [mike.gabriel] pyhoca-cli.spec: Adapt to PyHoca-CLI's Python3 port. ------------------------------------------ [...truncated 43.72 KB...] [ 22s] [44/106] cumulate libopenssl1_0_0-1.0.1i-4.1 [ 22s] [45/106] cumulate libselinux1-2.3-3.5 [ 22s] [46/106] cumulate libstdc++6-5.2.1+r226025-4.2 [ 22s] [47/106] cumulate libtsan0-5.2.1+r226025-4.2 [ 22s] [48/106] cumulate libmagic1-5.19-5.5 [ 22s] [49/106] cumulate libzio1-1.00-11.4 [ 23s] [50/106] cumulate file-5.19-5.5 [ 23s] [51/106] cumulate libcloog-isl4-0.18.1-3.5 [ 23s] [52/106] cumulate libdb-4_8-4.8.30-30.4 [ 23s] [53/106] cumulate libmount1-2.25-7.2 [ 23s] [54/106] cumulate libmpc3-1.0.2-3.5 [ 23s] [55/106] cumulate libncurses5-5.9-53.4 [ 23s] [56/106] cumulate libncurses6-5.9-53.4 [ 23s] [57/106] cumulate libsemanage1-2.3-3.5 [ 23s] [58/106] cumulate libreadline6-6.2-76.4 [ 23s] [59/106] cumulate ncurses-utils-5.9-53.4 [ 23s] [60/106] cumulate perl-5.18.2-3.5 [ 23s] [61/106] cumulate cpp48-4.8.5-16.7 [ 23s] [62/106] cumulate brp-check-suse-13.2+git20150217.031533d-3.2 [ 23s] [63/106] cumulate bash-4.2-76.4 [ 23s] [64/106] cumulate cpp-4.8-8.4 [ 24s] [65/106] cumulate bzip2-1.0.6-30.4 [ 24s] [66/106] cumulate xz-5.0.5-3.5 [ 24s] [67/106] cumulate info-4.13a-39.4 [ 24s] [68/106] cumulate python3-base-3.4.1-6.2 [ 24s] [69/106] cumulate cpio-2.11-30.4 [ 24s] [70/106] cumulate diffutils-3.3-7.1 [ 24s] [71/106] cumulate gzip-1.6-9.4 [ 24s] [72/106] cumulate m4-1.4.16-3.2 [ 24s] [73/106] cumulate make-4.0-4.4 [ 24s] [74/106] cumulate sed-4.2.2-6.1 [ 24s] [75/106] cumulate which-2.20-5.4 [ 24s] [76/106] cumulate findutils-4.5.12-3.5 [ 24s] [77/106] cumulate gawk-4.1.3-4.5 [ 24s] [78/106] cumulate gettext-runtime-mini-0.19.2-3.6 [ 24s] [79/106] cumulate grep-2.16-4.1 [ 25s] [80/106] cumulate binutils-2.25.0-5.2 [ 25s] [81/106] cumulate python3-devel-3.4.1-6.2 [ 25s] [82/106] cumulate tar-1.27.1-4.1 [ 25s] [83/106] cumulate python3-3.4.1-6.1 [ 25s] [84/106] cumulate coreutils-8.22-4.1 [ 25s] [85/106] cumulate linux-glibc-devel-4.1-1.1 [ 25s] [86/106] cumulate systemd-rpm-macros-2.1-1.3 [ 25s] [87/106] cumulate glibc-locale-2.19-17.4 [ 25s] [88/106] cumulate python3-setuptools-18.3.2-1.1 [ 25s] [89/106] cumulate gettext-tools-mini-0.19.2-3.6 [ 25s] [90/106] cumulate permissions-2014.08.26.1452-3.2 [ 25s] [91/106] cumulate rpm-4.11.2-6.2 [ 25s] [92/106] cumulate glibc-devel-2.19-17.4 [ 25s] [93/106] cumulate libutempter0-1.1.6-6.4 [ 25s] [94/106] cumulate rpmlint-mini-1.5-14.13 [ 26s] [95/106] cumulate rpmlint-Factory-1.0-89.1 [ 26s] [96/106] cumulate gcc48-4.8.5-16.7 [ 26s] [97/106] cumulate gcc-4.8-8.4 [ 26s] [98/106] cumulate libcrack2-2.9.0-5.4 [ 26s] [99/106] cumulate cracklib-2.9.0-5.4 [ 26s] [100/106] cumulate pam-1.1.8-12.4 [ 26s] [101/106] cumulate pam-modules-12.1-25.1 [ 26s] [102/106] cumulate util-linux-2.25-7.2 [ 26s] [103/106] cumulate aaa_base-13.2+git20140911.61c1681-4.6 [ 26s] [104/106] cumulate rpm-build-4.11.2-6.2 [ 26s] [105/106] cumulate aaa_base-malloccheck-13.2+git20140911.61c1681-4.6 [ 26s] [106/106] cumulate post-build-checks-13.2+git20140318.f24deaf-3.2 [ 26s] now installing cumulated packages [ 26s] warning: .init_b_cache/file-magic.rpm: Header V3 RSA/SHA256 Signature, key ID 3dbdc284: NOKEY [ 26s] Preparing... ######################################## [ 26s] Updating / installing... [ 26s] terminfo-base-5.9-53.4 ######################################## [ 26s] filesystem-13.1-5.1 ######################################## [ 27s] glibc-2.19-17.4 ######################################## [ 27s] libz1-1.2.8-6.4 ######################################## [ 27s] libbz2-1-1.0.6-30.4 ######################################## [ 27s] libgcc_s1-5.2.1+r226025-4.2 ######################################## [ 27s] libgmp10-5.1.3-4.4 ######################################## [ 27s] perl-base-5.18.2-3.5 ######################################## [ 27s] libstdc++6-5.2.1+r226025-4.2 ######################################## [ 27s] libncurses5-5.9-53.4 ######################################## [ 27s] fillup-1.42-272.1 ######################################## [ 27s] liblzma5-5.0.5-3.5 ######################################## [ 27s] libisl10-0.12.2-3.5 ######################################## [ 27s] libmpfr4-3.1.2-10.5 ######################################## [ 27s] libattr1-2.4.47-5.4 ######################################## [ 27s] libacl1-2.2.52-6.4 ######################################## [ 27s] libaudit1-2.3.6-3.5 ######################################## [ 27s] libcap2-2.22-14.4 ######################################## [ 27s] libpython3_4m1_0-3.4.1-6.2 ######################################## [ 27s] update-alternatives-1.16.10-9.4 ######################################## [ 27s] libmpc3-1.0.2-3.5 ######################################## [ 27s] libcloog-isl4-0.18.1-3.5 ######################################## [ 28s] cpp48-4.8.5-16.7 ######################################## [ 28s] libreadline6-6.2-76.4 ######################################## [ 28s] bash-4.2-76.4 ######################################## [ 28s] python3-base-3.4.1-6.2 ######################################## [ 28s] libgomp1-5.2.1+r226025-4.2 ######################################## [ 28s] libpcre1-8.33-3.5 ######################################## [ 28s] libselinux1-2.3-3.5 ######################################## [ 28s] libpopt0-1.16-28.4 ######################################## [ 28s] libuuid1-2.25-7.2 ######################################## [ 28s] libblkid1-2.25-7.2 ######################################## [ 28s] libmount1-2.25-7.2 ######################################## [ 28s] cpp-4.8-8.4 ######################################## [ 28s] bzip2-1.0.6-30.4 ######################################## [ 28s] xz-5.0.5-3.5 ######################################## [ 28s] libcrack2-2.9.0-5.4 ######################################## [ 28s] cracklib-2.9.0-5.4 ######################################## [ 28s] libzio1-1.00-11.4 ######################################## [ 28s] info-4.13a-39.4 ######################################## [ 28s] coreutils-8.22-4.1 ######################################## [ 28s] diffutils-3.3-7.1 ######################################## [ 29s] grep-2.16-4.1 ######################################## [ 29s] permissions-2014.08.26.1452-3.2 ######################################## [ 29s] Updating /etc/sysconfig/security... [ 29s] Warning: running kernel does not support fscaps [ 29s] Checking permissions and ownerships - using the permissions files [ 29s] /etc/permissions [ 29s] /etc/permissions.easy [ 29s] /etc/permissions.local [ 29s] setting /dev/full to root:root 0666. (wrong permissions 0622) [ 29s] setting /sbin/unix_chkpwd to root:shadow 4755. (wrong owner/group root:root) [ 29s] sed-4.2.2-6.1 ######################################## [ 29s] cpio-2.11-30.4 ######################################## [ 29s] pam-1.1.8-12.4 ######################################## [ 29s] Warning: running kernel does not support fscaps [ 29s] findutils-4.5.12-3.5 ######################################## [ 29s] gawk-4.1.3-4.5 ######################################## [ 29s] update-alternatives: using /usr/bin/gawk to provide /bin/awk (awk) in auto mode [ 30s] binutils-2.25.0-5.2 ######################################## [ 30s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode [ 30s] libutempter0-1.1.6-6.4 ######################################## [ 30s] Warning: running kernel does not support fscaps [ 30s] linux-glibc-devel-4.1-1.1 ######################################## [ 30s] glibc-devel-2.19-17.4 ######################################## [ 30s] systemd-rpm-macros-2.1-1.3 ######################################## [ 31s] glibc-locale-2.19-17.4 ######################################## [ 31s] gzip-1.6-9.4 ######################################## [ 31s] make-4.0-4.4 ######################################## [ 31s] which-2.20-5.4 ######################################## [ 31s] gettext-runtime-mini-0.19.2-3.6 ######################################## [ 31s] gettext-tools-mini-0.19.2-3.6 ######################################## [ 31s] tar-1.27.1-4.1 ######################################## [ 31s] ncurses-utils-5.9-53.4 ######################################## [ 31s] libdb-4_8-4.8.30-30.4 ######################################## [ 31s] libncurses6-5.9-53.4 ######################################## [ 32s] libasan0-4.8.5-16.7 ######################################## [ 32s] libtsan0-5.2.1+r226025-4.2 ######################################## [ 32s] libopenssl1_0_0-1.0.1i-4.1 ######################################## [ 32s] libatomic1-5.2.1+r226025-4.2 ######################################## [ 32s] libcap-ng0-0.7.3-3.5 ######################################## [ 32s] libelf1-0.158-9.5 ######################################## [ 32s] libexpat1-2.1.0-15.4 ######################################## [ 32s] libgdbm4-1.10-3.5 ######################################## [ 32s] perl-5.18.2-3.5 ######################################## [ 32s] libitm1-5.2.1+r226025-4.2 ######################################## [ 33s] gcc48-4.8.5-16.7 ######################################## [ 33s] gcc-4.8-8.4 ######################################## [ 33s] liblua5_1-5.1.5-11.4 ######################################## [ 33s] libsepol1-2.3-3.5 ######################################## [ 33s] libsmartcols1-2.25-7.2 ######################################## [ 33s] libsqlite3-0-3.8.10.2-5.2 ######################################## [ 33s] python3-3.4.1-6.1 ######################################## [ 33s] libustr-1_0-1-1.0.4-34.4 ######################################## [ 33s] libsemanage1-2.3-3.5 ######################################## [ 33s] net-tools-1.60-766.4 ######################################## [ 33s] patch-2.7.5-5.5 ######################################## [ 33s] pkg-config-0.28-8.4 ######################################## [ 33s] insserv-compat-0.1-13.4 ######################################## [ 33s] util-linux-2.25-7.2 ######################################## [ 33s] Warning: running kernel does not support fscaps [ 33s] setting /usr/bin/wall to root:tty 2755. (wrong permissions 0755) [ 33s] setting /usr/bin/write to root:tty 2755. (wrong permissions 0755) [ 33s] Warning: running kernel does not support fscaps [ 33s] aaa_base-13.2+git20140911.61c1681-4.6 ######################################## [ 34s] Updating /etc/sysconfig/language... [ 34s] Updating /etc/sysconfig/backup... [ 34s] Updating /etc/sysconfig/proxy... [ 34s] Updating /etc/sysconfig/windowmanager... [ 34s] Updating /etc/sysconfig/news... [ 34s] Updating etc/passwd...unchanged [ 34s] Updating etc/group...unchanged [ 34s] Updating etc/shadow...unchanged [ 34s] aaa_base-malloccheck-13.2+git20140911.######################################## [ 34s] file-magic-5.19-5.5 ######################################## [ 34s] libmagic1-5.19-5.5 ######################################## [ 34s] rpm-4.11.2-6.2 ######################################## [ 34s] Updating /etc/sysconfig/services... [ 34s] rpmlint-mini-1.5-14.13 ######################################## [ 35s] file-5.19-5.5 ######################################## [ 35s] rpm-build-4.11.2-6.2 ######################################## [ 35s] rpmlint-Factory-1.0-89.1 ######################################## [ 35s] post-build-checks-13.2+git20140318.f24######################################## [ 35s] python3-devel-3.4.1-6.2 ######################################## [ 35s] python3-setuptools-18.3.2-1.1 ######################################## [ 35s] update-alternatives: using /usr/bin/easy_install-3.4 to provide /usr/bin/easy_install (easy_install) in auto mode [ 35s] brp-check-suse-13.2+git20150217.031533######################################## [ 35s] pam-modules-12.1-25.1 ######################################## [ 35s] Warning: running kernel does not support fscaps [ 35s] m4-1.4.16-3.2 ######################################## [ 35s] attr-2.4.47-5.4 ######################################## [ 35s] build-mkbaselibs-20150903-1.1 ######################################## [ 35s] fdupes-1.50-7.4 ######################################## [ 35s] removing nis flags from /var/cache/obs-build/opensuse/42.1/x86_64/etc/nsswitch.conf... [ 35s] now finalizing build dir... [ 35s] ----------------------------------------------------------------- [ 35s] ----- building pyhoca-cli.spec (user abuild) [ 35s] ----------------------------------------------------------------- [ 35s] ----------------------------------------------------------------- [ 35s] + exec rpmbuild -bb --define '_srcdefattr (-,root,root)' --nosignature /home/abuild/rpmbuild/SOURCES/pyhoca-cli.spec [ 35s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.uhdrXR [ 35s] + umask 022 [ 35s] + cd /home/abuild/rpmbuild/BUILD [ 35s] + cd /home/abuild/rpmbuild/BUILD [ 35s] + rm -rf pyhoca-cli-0.5.99.0 [ 35s] + /usr/bin/gzip -dc /home/abuild/rpmbuild/SOURCES/pyhoca-cli-0.5.99.0.tar.gz [ 35s] + /bin/tar -xf - [ 35s] + STATUS=0 [ 35s] + '[' 0 -ne 0 ']' [ 35s] + cd pyhoca-cli-0.5.99.0 [ 35s] + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 35s] + exit 0 [ 35s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.hZa9rI [ 35s] + umask 022 [ 35s] + cd /home/abuild/rpmbuild/BUILD [ 35s] + /usr/bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.x86_64 [ 35s] ++ dirname /home/abuild/rpmbuild/BUILDROOT/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.x86_64 [ 35s] + /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT [ 35s] + /usr/bin/mkdir /home/abuild/rpmbuild/BUILDROOT/pyhoca-cli-0.5.99.0-0.0x2go1.0.git20170925.243.heuler.x86_64 [ 35s] + cd pyhoca-cli-0.5.99.0 [ 35s] + '%{__python3}' setup.py build [ 35s] /var/tmp/rpm-tmp.hZa9rI: line 32: fg: no job control [ 35s] error: Bad exit status from /var/tmp/rpm-tmp.hZa9rI (%build) [ 35s] [ 35s] [ 35s] RPM build errors: [ 35s] Bad exit status from /var/tmp/rpm-tmp.hZa9rI (%build) [ 35s] [ 35s] japsand failed "build pyhoca-cli.spec" at Mon Sep 25 11:21:40 UTC 2017. [ 35s] + exit 1 + cleanup + '[' -n '' ']' + '[' -n '' ']' + echo 'Warning: mock temporary config directory not defined. Skipping cleanup.' Warning: mock temporary config directory not defined. Skipping cleanup. + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.Q3LVhVUihwROb8RlzQKjgqzC ']' + '[' -d /var/lib/jenkins/tmp/tmp.Q3LVhVUihwROb8RlzQKjgqzC ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.Q3LVhVUihwROb8RlzQKjgqzC Build step 'Execute shell' marked build as failure

1 2

Build failed in Jenkins: x2goclient+ppc64be+nightly+epel-7 #10
by jenkins＠x2go.org 02 Nov '17

02 Nov '17

See <http://jenkins.x2go.org:8080/job/x2goclient+ppc64be+nightly+epel-7/10/displ…> Changes: [ionic] src/pulsemanager.cpp: print out PA --version output as a debug message. ------------------------------------------ [...truncated 256.02 KB...] /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/cupsprintersettingsdialog.h -o moc_cupsprintersettingsdialog.cpp /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/printwidget.h -o moc_printwidget.cpp /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/printercmddialog.h -o moc_printercmddialog.cpp /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/printdialog.h -o moc_printdialog.cpp /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/sessionwidget.h -o moc_sessionwidget.cpp /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/connectionwidget.h -o moc_connectionwidget.cpp /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/settingswidget.h -o moc_settingswidget.cpp /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/mediawidget.h -o moc_mediawidget.cpp /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/sharewidget.h -o moc_sharewidget.cpp /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/clicklineedit.h -o moc_clicklineedit.cpp /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/httpbrokerclient.h -o moc_httpbrokerclient.cpp /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/brokerpassdlg.h -o moc_brokerpassdlg.cpp /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/contest.h -o moc_contest.cpp /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/xsettingswidget.h -o moc_xsettingswidget.cpp /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/appdialog.h -o moc_appdialog.cpp ../src/xsettingswidget.h:0: Note: No relevant classes found. No output generated. /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/sessionexplorer.h -o moc_sessionexplorer.cpp /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/folderbutton.h -o moc_folderbutton.cpp /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/folderexplorer.h -o moc_folderexplorer.cpp /usr/lib64/qt4/bin/moc -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. ../src/pulsemanager.h -o moc_pulsemanager.cpp /usr/lib64/qt4/bin/rcc -name resources ../res/resources.qrc -o qrc_resources.cpp /usr/lib64/qt4/bin/rcc -name git ../res/git.qrc -o qrc_git.cpp /usr/lib64/qt4/bin/rcc -name changelog ../res/changelog.qrc -o qrc_changelog.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_configdialog.o moc_configdialog.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_editconnectiondialog.o moc_editconnectiondialog.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_exportdialog.o moc_exportdialog.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_imgframe.o moc_imgframe.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_onmainwindow.o moc_onmainwindow.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_sessionbutton.o moc_sessionbutton.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_sessionmanagedialog.o moc_sessionmanagedialog.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_sshmasterconnection.o moc_sshmasterconnection.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_sshprocess.o moc_sshprocess.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_SVGFrame.o moc_SVGFrame.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_InteractionDialog.o moc_InteractionDialog.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_userbutton.o moc_userbutton.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_printprocess.o moc_printprocess.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_cupsprintwidget.o moc_cupsprintwidget.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_cupsprintersettingsdialog.o moc_cupsprintersettingsdialog.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_printwidget.o moc_printwidget.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_printercmddialog.o moc_printercmddialog.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_printdialog.o moc_printdialog.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_sessionwidget.o moc_sessionwidget.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_connectionwidget.o moc_connectionwidget.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_settingswidget.o moc_settingswidget.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_mediawidget.o moc_mediawidget.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_sharewidget.o moc_sharewidget.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_clicklineedit.o moc_clicklineedit.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_httpbrokerclient.o moc_httpbrokerclient.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_brokerpassdlg.o moc_brokerpassdlg.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_contest.o moc_contest.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_xsettingswidget.o moc_xsettingswidget.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_appdialog.o moc_appdialog.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_sessionexplorer.o moc_sessionexplorer.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_folderbutton.o moc_folderbutton.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_folderexplorer.o moc_folderexplorer.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o moc_pulsemanager.o moc_pulsemanager.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o qrc_resources.o qrc_resources.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o qrc_git.o qrc_git.cpp g++ -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mcpu=power7 -mtune=power7 -O2 -Wall -W -D_REENTRANT -fPIC -D__linux__ -DCFGPLUGIN -DQT_NO_DEBUG -DQT_PLUGIN -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++-64 -I../../x2goclient-4.1.1.1 -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtSvg -I/usr/include -I../src -I. -I. -I../../x2goclient-4.1.1.1 -I. -o qrc_changelog.o qrc_changelog.cpp rm -f libx2goplugin.so g++ -lldap -lcups -lX11 -lXpm -Wl,-O1 -Wl,-z,relro -shared -o libx2goplugin.so sharewidget.o settingswidget.o mediawidget.o configwidget.o sessionwidget.o connectionwidget.o configdialog.o editconnectiondialog.o exportdialog.o imgframe.o LDAPSession.o onmainwindow.o sessionbutton.o sessionmanagedialog.o sshmasterconnection.o sshprocess.o SVGFrame.o InteractionDialog.o userbutton.o x2gologdebug.o printprocess.o cupsprint.o cupsprintwidget.o cupsprintersettingsdialog.o printwidget.o printercmddialog.o printdialog.o wapi.o clicklineedit.o httpbrokerclient.o ongetpass.o x2gosettings.o brokerpassdlg.o contest.o xsettingswidget.o appdialog.o x2goutils.o helpdialog.o sessionexplorer.o folderbutton.o folderexplorer.o non_modal_messagebox.o help.o unixhelper.o compat.o pulsemanager.o moc_configdialog.o moc_editconnectiondialog.o moc_exportdialog.o moc_imgframe.o moc_onmainwindow.o moc_sessionbutton.o moc_sessionmanagedialog.o moc_sshmasterconnection.o moc_sshprocess.o moc_SVGFrame.o moc_InteractionDialog.o moc_userbutton.o moc_printprocess.o moc_cupsprintwidget.o moc_cupsprintersettingsdialog.o moc_printwidget.o moc_printercmddialog.o moc_printdialog.o moc_sessionwidget.o moc_connectionwidget.o moc_settingswidget.o moc_mediawidget.o moc_sharewidget.o moc_clicklineedit.o moc_httpbrokerclient.o moc_brokerpassdlg.o moc_contest.o moc_xsettingswidget.o moc_appdialog.o moc_sessionexplorer.o moc_folderbutton.o moc_folderexplorer.o moc_pulsemanager.o qrc_resources.o qrc_git.o qrc_changelog.o -L/usr/lib64 -lssh -lssh_threads -ldl -lldap -lcups -lX11 -lXpm -lqtbrowserplugin -lQtSvg -lQtGui -lQtNetwork -lQtCore -lpthread make[2]: Leaving directory `/builddir/build/BUILD/x2goclient-4.1.1.1/plugin_build' make[1]: Leaving directory `/builddir/build/BUILD/x2goclient-4.1.1.1' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ksoXox + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64 ++ dirname /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64 + cd x2goclient-4.1.1.1 + make install DESTDIR=/builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64 PREFIX=/usr install -d -m 755 /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/bin/ install -d -m 755 /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/applications install -d -m 755 /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/x2goclient/icons install -d -m 755 /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/icons/hicolor/128x128/apps install -d -m 755 /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/icons/hicolor/16x16/apps install -d -m 755 /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/icons/hicolor/64x64/apps install -d -m 755 /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/icons/hicolor/32x32/apps install -m 755 /builddir/build/BUILD/x2goclient-4.1.1.1/client_build/x2goclient /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/bin/x2goclient install -m 644 desktop/x2goclient.desktop /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/applications/x2goclient.desktop install -m 644 res/img/icons/x2goclient.xpm /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/x2goclient/icons/x2goclient.xpm install -m 644 res/img/icons/128x128/x2goclient.png /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/x2goclient/icons/x2goclient.png install -m 644 res/img/icons/128x128/x2gosession.png /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/x2goclient/icons/x2gosession.png install -m 644 res/img/icons/128x128/x2goclient.png /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/icons/hicolor/128x128/apps/x2goclient.png install -m 644 res/img/icons/16x16/x2goclient.png /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/icons/hicolor/16x16/apps/x2goclient.png install -m 644 res/img/icons/64x64/x2goclient.png /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/icons/hicolor/64x64/apps/x2goclient.png install -m 644 res/img/icons/32x32/x2goclient.png /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/icons/hicolor/32x32/apps/x2goclient.png install -d -m 755 /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/lib64/mozilla/plugins/ install -m 755 /builddir/build/BUILD/x2goclient-4.1.1.1/plugin_build/libx2goplugin.so /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/lib64/mozilla/plugins/libx2goplugin.so install -d -m 755 /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/man/ install -d -m 755 /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/man/man1 install -m 644 man/man1/x2goclient.1 /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/man/man1/x2goclient.1 gzip -f /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/man/man1/x2goclient.1 install -d -m 755 /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/etc/x2go/plugin-provider install -m 644 provider/etc/x2goplugin-apache.conf /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/etc/x2go/x2goplugin-apache.conf install -m 644 provider/share/x2goplugin.html /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/etc/x2go/plugin-provider/x2goplugin.html install -d -m 755 /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/x2go/plugin/ ln -s -f ../../../..//etc/x2go/plugin-provider/x2goplugin.html /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/x2go/plugin/x2goplugin.html + desktop-file-validate /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/applications/x2goclient.desktop + mkdir -p /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/etc/httpd/conf.d + ln -s ../../x2go/x2goplugin-apache.conf /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/etc/httpd/conf.d/x2goplugin-provider.conf + /usr/lib/rpm/find-debuginfo.sh --strict-build-id -m --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 /builddir/build/BUILD/x2goclient-4.1.1.1 extracting debug info from /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/bin/x2goclient extracting debug info from /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/lib64/mozilla/plugins/libx2goplugin.so /usr/lib/rpm/sepdebugcrcfix: Updated 2 CRC32s, 0 CRC32s did match. 24269 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-compress + /usr/lib/rpm/redhat/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 + /usr/lib/rpm/redhat/brp-python-hardlink + /usr/lib/rpm/redhat/brp-java-repack-jars Processing files: x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.K68Dqi + umask 022 + cd /builddir/build/BUILD + cd x2goclient-4.1.1.1 + DOCDIR=/builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/doc/x2goclient-4.1.1.1 + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/doc/x2goclient-4.1.1.1 + cp -pr AUTHORS /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/doc/x2goclient-4.1.1.1 + cp -pr COPYING /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/doc/x2goclient-4.1.1.1 + cp -pr LICENSE /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64/usr/share/doc/x2goclient-4.1.1.1 + exit 0 Provides: application() application(x2goclient.desktop) x2goclient = 4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos x2goclient(ppc-64) = 4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos Requires(interp): /bin/sh /bin/sh /bin/sh Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /bin/sh Requires(postun): /bin/sh Requires(posttrans): /bin/sh Requires: libQtCore.so.4()(64bit) libQtGui.so.4()(64bit) libQtNetwork.so.4()(64bit) libQtSvg.so.4()(64bit) libX11.so.6()(64bit) libXpm.so.4()(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.15)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.4)(64bit) libcups.so.2()(64bit) libdl.so.2()(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libldap-2.4.so.2()(64bit) libm.so.6()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.3)(64bit) libssh.so.4()(64bit) libssh_threads.so.4()(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(CXXABI_1.3.1)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.11)(64bit) libstdc++.so.6(GLIBCXX_3.4.15)(64bit) libstdc++.so.6(GLIBCXX_3.4.9)(64bit) rtld(GNU_HASH) Processing files: x2goplugin-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64 Provides: libx2goplugin.so()(64bit) x2goplugin = 4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos x2goplugin(ppc-64) = 4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: libQtCore.so.4()(64bit) libQtGui.so.4()(64bit) libQtNetwork.so.4()(64bit) libQtSvg.so.4()(64bit) libX11.so.6()(64bit) libXpm.so.4()(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.15)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.4)(64bit) libcups.so.2()(64bit) libdl.so.2()(64bit) libdl.so.2(GLIBC_2.3)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libldap-2.4.so.2()(64bit) libm.so.6()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.3)(64bit) libssh.so.4()(64bit) libssh_threads.so.4()(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(CXXABI_1.3.1)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.11)(64bit) libstdc++.so.6(GLIBCXX_3.4.15)(64bit) libstdc++.so.6(GLIBCXX_3.4.9)(64bit) rtld(GNU_HASH) Processing files: x2goplugin-provider-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64 Provides: config(x2goplugin-provider) = 4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos x2goplugin-provider = 4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos x2goplugin-provider(ppc-64) = 4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: x2goclient-debuginfo-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64 Provides: x2goclient-debuginfo = 4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos x2goclient-debuginfo(ppc-64) = 4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos Requires(rpmlib): rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64 Wrote: /builddir/build/RPMS/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64.rpm Wrote: /builddir/build/RPMS/x2goplugin-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64.rpm Wrote: /builddir/build/RPMS/x2goplugin-provider-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64.rpm Wrote: /builddir/build/RPMS/x2goclient-debuginfo-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.FWrqQd + umask 022 + cd /builddir/build/BUILD + cd x2goclient-4.1.1.1 + /usr/bin/rm -rf /builddir/build/BUILDROOT/x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.ppc64 + exit 0 Child return code was: 0 LEAVE do --> + read -r -d '' srpm + noarch_built=1 + return 0 + unlock_workspace /home/x2go-jenkins/build/heuler/x2goclient/../.x2goclient.lock + typeset lock_file=/home/x2go-jenkins/build/heuler/x2goclient/../.x2goclient.lock + rm -f -- /home/x2go-jenkins/build/heuler/x2goclient/../.x2goclient.lock ++ basename ./x2go-build+upload-rpm-package + '[' xx2go-build+upload-rpm-package = xx2go-upload-rpm-package ']' ++ basename ./x2go-build+upload-rpm-package + '[' xx2go-build+upload-rpm-package = xx2go-build+upload-rpm-package ']' + upload_packages + typeset -a rpm_build_for_arr + typeset 'OLDIFS= ' + IFS=' ' + read -a rpm_build_for_arr + IFS=' ' + typeset line= + for line in '"${rpm_build_for_arr[@]}"' ++ tr '[:upper:]' '[:lower:]' ++ cut -d: -f1 + l_DIST=epel ++ sed -e 's/,/ /g' ++ tr '[:upper:]' '[:lower:]' ++ cut -d: -f2- + l_CODENAMES=7 + for l_CODENAME in '${l_CODENAMES}' + test -z '' + typeset -a arches + arches=() + arches+=("SRPM") + case "${PLATFORM}" in + arches+=("ppc64") + for l_ARCH in '"${arches[@]}"' + '[' x '!=' xSRPM ']' + '[' epel = opensuse ']' + '[' epel = sle ']' + ssh -- packages.x2go.org 'mkdir -p -- '\''/srv/sites/x2go.org/packages//epel/7/heuler/SRPM/rpms/x2goclient'\''' + ssh -- packages.x2go.org 'mkdir -p -- '\''/srv/sites/x2go.org/packages//epel/7/heuler/SRPM/repodata'\''' + ssh -- packages.x2go.org 'rm -f -- '\''/srv/sites/x2go.org/packages//epel/7/heuler/SRPM/rpms/x2goclient/'\''*.rpm' + cd /home/x2go-jenkins/pkg-dist/heuler/x2goclient/epel/7/SRPM + scp x2goclient-4.1.1.1-0.0x2go1.0.git20171029.1694.heuler.el7.centos.src.rpm 'packages.x2go.org:'\''/srv/sites/x2go.org/packages//epel/7/heuler/SRPM/rpms/x2goclient/'\''' + typeset createrepo_opts= + typeset gpg_sign_with=F4A7678C9C6B0B2B + '[' epel = epel ']' + '[' 7 = 5 ']' + ssh -- packages.x2go.org 'cd '\''/srv/sites/x2go.org/packages//epel/7/heuler/SRPM/'\'' && createrepo '\''.'\''' (process:4116): GLib-CRITICAL **: g_timer_stop: assertion 'timer != NULL' failed (process:4116): GLib-CRITICAL **: g_timer_destroy: assertion 'timer != NULL' failed Spawning worker 0 with 4 pkgs Spawning worker 1 with 3 pkgs Spawning worker 2 with 3 pkgs Spawning worker 3 with 3 pkgs Workers Finished Saving Primary metadata Saving file lists metadata Saving other metadata Generating sqlite DBs Traceback (most recent call last): File "/usr/share/createrepo/genpkgmetadata.py", line 308, in <module> main(sys.argv[1:]) File "/usr/share/createrepo/genpkgmetadata.py", line 280, in main mdgen.doRepoMetadata() File "/usr/lib/python2.7/dist-packages/createrepo/__init__.py", line 999, in doRepoMetadata rp.getFilelists(complete_path, csum) File "/usr/lib/python2.7/dist-packages/sqlitecachec.py", line 54, in getFilelists self.repoid)) TypeError: Can not create filelist table: disk I/O error + cleanup + '[' -n /home/x2go-jenkins/tmp/x2go-mock-iu8GsCLEVDcEVMWwtXZaxUuZ ']' + '[' -e /home/x2go-jenkins/tmp/x2go-mock-iu8GsCLEVDcEVMWwtXZaxUuZ ']' + case "${TMP_MOCK_CFG_DIR}" in + typeset file= + for file in '"${TMP_MOCK_CFG_DIR}/"*' + '[' '!' -f /home/x2go-jenkins/tmp/x2go-mock-iu8GsCLEVDcEVMWwtXZaxUuZ/epel-7-ppc64-x2go-nightly-full.gsmWF5E4P6TLmlRdBWko4q8y.cfg ']' + rm -- /home/x2go-jenkins/tmp/x2go-mock-iu8GsCLEVDcEVMWwtXZaxUuZ/epel-7-ppc64-x2go-nightly-full.gsmWF5E4P6TLmlRdBWko4q8y.cfg + for file in '"${TMP_MOCK_CFG_DIR}/"*' + '[' '!' -f /home/x2go-jenkins/tmp/x2go-mock-iu8GsCLEVDcEVMWwtXZaxUuZ/epel-7-ppc64-x2go-nightly-full.o7nqwWzE4LzxvMsyrtel9D0a.cfg ']' + rm -- /home/x2go-jenkins/tmp/x2go-mock-iu8GsCLEVDcEVMWwtXZaxUuZ/epel-7-ppc64-x2go-nightly-full.o7nqwWzE4LzxvMsyrtel9D0a.cfg + '[' -e /home/x2go-jenkins/tmp/x2go-mock-iu8GsCLEVDcEVMWwtXZaxUuZ ']' + '[' -d /home/x2go-jenkins/tmp/x2go-mock-iu8GsCLEVDcEVMWwtXZaxUuZ ']' + rmdir -- /home/x2go-jenkins/tmp/x2go-mock-iu8GsCLEVDcEVMWwtXZaxUuZ + typeset temp_dir= + for temp_dir in '"${temp_cleanup[@]}"' + '[' -n /home/x2go-jenkins/tmp/tmp.SOSR5Wi0o9KrPZATQIz7nQmm ']' + '[' -d /home/x2go-jenkins/tmp/tmp.SOSR5Wi0o9KrPZATQIz7nQmm ']' + rm -Rf -- /home/x2go-jenkins/tmp/tmp.SOSR5Wi0o9KrPZATQIz7nQmm Build step 'Execute shell' marked build as failure

1 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

x2go-commits October 2017