Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Created By | dick.kniep@lindix.nl Summary | pyhoca-gui does not start on Windows Queue | pyhoca-gui Version | HEAD Type | Bug State | Unconfirmed Priority | 3. High Operating System | 7 Owners | ------------------------------------------------------------------------------ dick.kniep@lindix.nl (2011-03-01 17:40) wrote: The new windows version does not start a session on Windows. It works OK on Linux, but not on Windows. It simply does not start a session. I am able to authenticate, but when I start a session it doesn't do a thing. Weird though is that it looks like a problem with the X-server, because at a certain moment I removed VcXsrv and then it did start with XMing which was also installed. The issue occurs both on Windows XP and on Windows 7.
Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Updated By | Mike Gabriel <mike.gabriel@das-netzwerkteam.de> Summary | pyhoca-gui does not start on Windows Queue | pyhoca-gui Version | HEAD Type | Bug -State | Unconfirmed +State | Feedback Priority | 3. High Operating System | 7 -Owners | +Owners | Mike Gabriel ------------------------------------------------------------------------------ Mike Gabriel <mike.gabriel@das-netzwerkteam.de> (2011-03-01 21:11) wrote: Have you installed PyHoca-GUI with the latest NSIS-based installer package? http://code.x2go.org/gitweb?p=pyhoca-contrib.git;a=tree;f=win32-dist/install... If yes: please make sure that either Xming 6.9.x, Cygwin/X or the very latest VcXsrv is also installed. It is also recommended to install Ghostscript/Ghostgum on the client (for PDF handling of incoming printjobs). If you start pyhoca-gui from the command line, please make sure you use at least the following options: pyhoca-gui.exe --start-xserver --start-pulseaudio --quiet If you follow these instructions, do you still observe the same issue?
Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Updated By | dick.kniep@lindix.nl Summary | pyhoca-gui does not start on Windows Queue | pyhoca-gui Version | HEAD Type | Bug State | Feedback Priority | 3. High Operating System | 7 Owners | Mike Gabriel ------------------------------------------------------------------------------ dick.kniep@lindix.nl (2011-03-02 11:56) wrote: Made a clean install on Windows 7 from the packages you indicated (VcXsrv newest from sourceforge) and from the link you sent in the previous note. Same result, I can authenticate, but the screen never appears. It looks like VcXsrv is never started, but I am not sure. Tried several things with network and other things. Extra info: I did not install Ghostgum
Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Updated By | dick.kniep@lindix.nl Summary | pyhoca-gui does not start on Windows Queue | pyhoca-gui Version | HEAD Type | Bug State | Feedback Priority | 3. High Operating System | 7 Owners | Mike Gabriel ------------------------------------------------------------------------------ dick.kniep@lindix.nl (2011-03-02 12:01) wrote: Started VcXsrv manually, that did not help either.
Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Updated By | Mike Gabriel <mike.gabriel@das-netzwerkteam.de> Summary | pyhoca-gui does not start on Windows Queue | pyhoca-gui Version | HEAD Type | Bug State | Feedback Priority | 3. High Operating System | 7 Owners | Mike Gabriel ------------------------------------------------------------------------------ Mike Gabriel <mike.gabriel@das-netzwerkteam.de> (2011-03-02 12:56) wrote:
Started VcXsrv manually, that did not help either.
If you start VcXsrv manually, please do not use --start-xserver but instead use --display localhost:0 when starting PyHoca-GUI.
Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Updated By | Mike Gabriel <mike.gabriel@das-netzwerkteam.de> Summary | pyhoca-gui does not start on Windows Queue | pyhoca-gui Version | HEAD Type | Bug State | Feedback Priority | 3. High Operating System | 7 Owners | Mike Gabriel ------------------------------------------------------------------------------ Mike Gabriel <mike.gabriel@das-netzwerkteam.de> (2011-03-02 12:58) wrote:
Made a clean install on Windows 7 from the packages you indicated (VcXsrv newest from sourceforge) and from the link you sent in the previous note.
Same result, I can authenticate, but the screen never appears. It looks like VcXsrv is never started, but I am not sure. Tried several things with network and other things.
Please take a look at ~/.x2goclient/xconfig and make sure that the VcXsrv.exe application path is currect. Does VcXsrv start after this fix? What path is VcXsrv installed on Windows 7???
Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Updated By | dick.kniep@lindix.nl Summary | pyhoca-gui does not start on Windows Queue | pyhoca-gui Version | HEAD Type | Bug State | Feedback Priority | 3. High Operating System | 7 Owners | Mike Gabriel ------------------------------------------------------------------------------ dick.kniep@lindix.nl (2011-03-02 13:13) wrote: The path to vcxsrv is correct in .x2goclient/ Tried again with manual start of vcxsrv and --display localhost:0. Still no screen. :-(
Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Updated By | Mike Gabriel <mike.gabriel@das-netzwerkteam.de> Summary | pyhoca-gui does not start on Windows Queue | pyhoca-gui Version | HEAD Type | Bug State | Feedback Priority | 3. High Operating System | 7 Owners | Mike Gabriel ------------------------------------------------------------------------------ Mike Gabriel <mike.gabriel@das-netzwerkteam.de> (2011-03-02 13:26) wrote: Please send the log output that PyHoca-GUI spits out when using the --libdebug option...
Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Updated By | dick.kniep@lindix.nl Summary | pyhoca-gui does not start on Windows Queue | pyhoca-gui Version | HEAD Type | Bug State | Feedback Priority | 3. High Operating System | 7 Owners | Mike Gabriel ------------------------------------------------------------------------------ dick.kniep@lindix.nl (2011-03-02 13:42) wrote: NXPROXY - Version 3.4.0 Copyright (C) 2001, 2010 NoMachine. See http://www.nomachine.com/ for more information. Info: Proxy running in client mode with pid '3444'. Session: Starting session at 'Wed Mar 2 13:39:18 2011'. Info: Connecting to remote host 'localhost:30004'. Info: Connection to remote proxy 'localhost:30004' established. Info: Connection with remote proxy completed. Warning: Unrecognized session type 'unix-kde-depth_24'. Assuming agent session. Warning: Failed to read data from the X auth command. Warning: Generated a fake cookie for X authentication. Info: Using ADSL link parameters 512/24/1/0. Info: Using cache parameters 4/4096KB/8192KB/8192KB. Info: Using pack method '16m-jpeg-9' with session 'unix-kde-depth_24'. Info: Using ZLIB data compression 1/1/32. Info: Using ZLIB stream compression 4/4. Info: No suitable cache file found. Hi Mike, Here is the log. Info: Forwarding X11 connections to display 'localhost:0'. Session: Session started at 'Wed Mar 2 13:39:20 2011'. Error: Connection to 'localhost:0' failed. Error is 111 'Connection refused'. Session: Terminating session at 'Wed Mar 2 13:39:34 2011'. Info: Your session was closed before reaching a usable state. Info: This can be due to the local X server refusing access to the client. Info: Please check authorization provided by the remote X application. Session: Session terminated at 'Wed Mar 2 13:39:34 2011'. It seems that the X-server simply refuses the connection. Probably we need to add an xauth to the installation script!!
Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Updated By | Mike Gabriel <mike.gabriel@das-netzwerkteam.de> Summary | pyhoca-gui does not start on Windows Queue | pyhoca-gui Version | HEAD Type | Bug State | Feedback Priority | 3. High Operating System | 7 Owners | Mike Gabriel ------------------------------------------------------------------------------ Mike Gabriel <mike.gabriel@das-netzwerkteam.de> (2011-03-02 14:16) wrote: This is not the PyHoca-GUI log, it is the nxproxy log...
NXPROXY - Version 3.4.0
Copyright (C) 2001, 2010 NoMachine. See http://www.nomachine.com/ for more information.
Info: Proxy running in client mode with pid '3444'. Session: Starting session at 'Wed Mar 2 13:39:18 2011'. Info: Connecting to remote host 'localhost:30004'. Info: Connection to remote proxy 'localhost:30004' established. Info: Connection with remote proxy completed. Warning: Unrecognized session type 'unix-kde-depth_24'. Assuming agent session. Warning: Failed to read data from the X auth command. Warning: Generated a fake cookie for X authentication. Info: Using ADSL link parameters 512/24/1/0. Info: Using cache parameters 4/4096KB/8192KB/8192KB. Info: Using pack method '16m-jpeg-9' with session 'unix-kde-depth_24'. Info: Using ZLIB data compression 1/1/32. Info: Using ZLIB stream compression 4/4. Info: No suitable cache file found. Hi Mike,
Here is the log.
Info: Forwarding X11 connections to display 'localhost:0'. Session: Session started at 'Wed Mar 2 13:39:20 2011'. Error: Connection to 'localhost:0' failed. Error is 111 'Connection refused'. Session: Terminating session at 'Wed Mar 2 13:39:34 2011'. Info: Your session was closed before reaching a usable state. Info: This can be due to the local X server refusing access to the client. Info: Please check authorization provided by the remote X application. Session: Session terminated at 'Wed Mar 2 13:39:34 2011'.
It seems that the X-server simply refuses the connection. Probably we need to add an xauth to the installation script!!
The PyHoca-GUI log in debug mode (--libdebug) is logged to (sorry, I forgot to mention): <same-path-as-pyhoca-gui.exe>\pyhoca-gui.exe.log
Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Updated By | dick.kniep@lindix.nl Summary | pyhoca-gui does not start on Windows Queue | pyhoca-gui Version | HEAD Type | Bug State | Feedback Priority | 3. High Operating System | 7 Owners | Mike Gabriel ------------------------------------------------------------------------------ dick.kniep@lindix.nl (2011-03-02 14:35) wrote: First typed "cmd" to start the terminal I switched to c:\program files\pyhoca-gui Then started pyhoca-gui as follows: pyhoca-gui --quiet --start-xserver --lang nl --libdebug The problem occurs, however no file pyhoca-gui.exe.log is created.....
Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Updated By | Mike Gabriel <mike.gabriel@das-netzwerkteam.de> Summary | pyhoca-gui does not start on Windows Queue | pyhoca-gui Version | HEAD Type | Bug State | Feedback Priority | 3. High Operating System | 7 Owners | Mike Gabriel ------------------------------------------------------------------------------ Mike Gabriel <mike.gabriel@das-netzwerkteam.de> (2011-03-02 14:55) wrote:
The problem occurs, however no file pyhoca-gui.exe.log is created.....
So, alternatively, please take a look at %TEMP%\. There should be some log files then (your report confirms that the log file redirect works properly on Windows 7 ;-) )
Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Updated By | Mike Gabriel <mike.gabriel@das-netzwerkteam.de> Summary | pyhoca-gui does not start on Windows Queue | pyhoca-gui Version | HEAD Type | Bug -State | Feedback +State | Confirmed Priority | 3. High Operating System | 7 Owners | Mike Gabriel ------------------------------------------------------------------------------ Mike Gabriel <mike.gabriel@das-netzwerkteam.de> (2011-03-02 14:59) wrote: I can reproduce this (or a similar) error on Windows XP and Win2008R2. VcXsrv crashes instantly when started by PyHoca-GUI (there is a real Windows debug/crash notification for vcxsrv.exe...). However, I can start VcXsrv from a cmd window with vcxsrv.exe -multiwindow -clipboard -nowinkill -nounixkill -swcursor (-notrayicon) And then PyHoca-GUI with pyhoca-gui --display localhost:0.0 --quiet
Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Updated By | dick.kniep@lindix.nl Summary | pyhoca-gui does not start on Windows Queue | pyhoca-gui Version | HEAD Type | Bug State | Confirmed Priority | 3. High Operating System | 7 Owners | Mike Gabriel ------------------------------------------------------------------------------ dick.kniep@lindix.nl (2011-03-02 16:17) wrote: Works with XMing I removed VcXsrv and installed XMing. Then it works. However the clipboard does not........ This confirms that the problem is with VcXsrv that crashes when used with pyhoca....
Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Updated By | Mike Gabriel <mike.gabriel@das-netzwerkteam.de> Summary | pyhoca-gui does not start on Windows Queue | pyhoca-gui Version | HEAD Type | Bug State | Confirmed Priority | 3. High Operating System | 7 Owners | Mike Gabriel ------------------------------------------------------------------------------ Mike Gabriel <mike.gabriel@das-netzwerkteam.de> (2011-03-02 18:35) wrote: Just for my own notes: this exception occurs when starting PyHoca-GUI/VcXsrv on Windows XP at work. Exception in thread Thread-1: Traceback (most recent call last): File "threading.pyo", line 532, in __bootstrap_inner File "x2go\xserver.pyo", line 197, in run File "subprocess.pyo", line 665, in __init__ File "subprocess.pyo", line 773, in _get_handles File "subprocess.pyo", line 812, in _make_inheritable WindowsError: [Error 6] Das Handle ist ungültig However, it seems to work on the development system (which is also a Windows XP)...
Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Updated By | Mike Gabriel <mike.gabriel@das-netzwerkteam.de> Summary | pyhoca-gui does not start on Windows Queue | pyhoca-gui Version | HEAD Type | Bug -State | Confirmed +State | Resolved Priority | 3. High Operating System | 7 Owners | Mike Gabriel ------------------------------------------------------------------------------ Mike Gabriel <mike.gabriel@das-netzwerkteam.de> (2011-03-07 13:56) wrote: This issue has been fixed by: http://code.x2go.org/gitweb?p=python-x2go.git;a=commit;h=1030c997272c773dd8d... Make sure that you remove ~/.x2goclient/xconfig and let it be anew created on your client system.
Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Updated By | dick.kniep@lindix.nl Summary | pyhoca-gui does not start on Windows Queue | python-x2go Version | HEAD Type | Bug State | Resolved Priority | 3. High Operating System | 7 Owners | Mike Gabriel ------------------------------------------------------------------------------ dick.kniep@lindix.nl (2011-03-07 17:43) wrote: Unfortunately it does not work on my computers. I tested on 2 different windows 7 computers (a palmtop and a normal laptop) and on a virtual win xp box. For none of them the session really starts.... So NO result yet!
Ticket URL: http://code.x2go.org/horde4/whups/ticket/?id=48 ------------------------------------------------------------------------------ Ticket | 48 Updated By | dick.kniep@lindix.nl Summary | pyhoca-gui does not start on Windows Queue | python-x2go Version | HEAD Type | Bug State | Resolved Priority | 3. High Operating System | 7 Owners | Mike Gabriel ------------------------------------------------------------------------------ dick.kniep@lindix.nl (2011-03-07 17:45) wrote: I tested with pyhoca-gui-0.0.31.0_win32-setup_testing1.exe from pyhoca-contrib/mswin/installers
-
bugs＠x2go.org