Update:<br><br>I tried to copy only the running /opt/x2gothinclient<br>and the /srv/tftp/ from an old running installation (install from 2012/01/17)<br>And it's running perfect.<br><br>I found out, that there are some changes in the structure (or something missing)<br>
under the old running structure I have a folder /opt/x2gothinclient/chroot/usr/lib/nx/X11<br>under the new I didn't.<br><br>--- okay next I did a chroot in each environment an checked the installed packages ---<br>working:<br>
x2go-keyring 2011.12.07+squeeze~main~12~build1 <br>x2gocdmanager 1.0.1.3-0~x2go1.1+squeeze~main~274~build1 <br>x2goclient 3.99.0.3-0~x2go4+squeeze~main~129~build1<br>
x2gosmartcardrules 1.0.1.3-0~x2go1.1+squeeze~main~274~build1<br>x2gothinclient 1.0.1.3-0~x2go1.1+squeeze~main~274~build1 <br>x2gothinshutdown 1.0.1.3-0~x2go1.1+squeeze~main~274~build1<br>
x2gousbmount 1.0.1.3-0~x2go1.1+squeeze~main~274~build1<br>libnx-x11 2:3.5.0.2-0+squeeze~main~199~build1<br>nxproxy 2:3.5.0.2-0+squeeze~main~199~build1<br>
<br>not working:<br>pinentry-x2go 0.7.5.0-0~x2go1+squeeze~main~12~build1 <br>x2go-keyring 2011.12.07+squeeze~main~12~build1<br>x2gocdmanager 1.0.1.6-0~x2go2+squeeze~main~306~build1 <br>
x2goclient 3.99.1.1-0~x2go1+squeeze~main~194~build1 <br>x2gosmartcardrules 1.0.1.6-0~x2go2+squeeze~main~306~build1<br>x2gothinclient 1.0.1.6-0~x2go2+squeeze~main~306~build1 <br>
x2gousbmount 1.0.1.6-0~x2go2+squeeze~main~306~build1 <br>nxproxy 2:3.5.0.12-0+squeeze~main~298~build1<br><br>So far I get to the point, where I just use the old working setup, but I'll test so that updating/upgrading work in future.<br>
But I still run around that point, that it has something todo with xauth, but deleting the .Xauthority has no effect.<br>xauth list brings 2 entrys ... <br><br>But actually I'm not so deep inside xauth/X11 forward so I still have to go deeper inside.<br>
Maybe now a hint from anybody ?<br><br>Brgds T.<br><br><br><div class="gmail_quote">Am 20. März 2012 19:46 schrieb TorBaTux <span dir="ltr"><<a href="mailto:torbatux@googlemail.com" target="_blank">torbatux@googlemail.com</a>></span>:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi Stefan,<br>
<br>
Today I reinstalled the whole system, the only change I made was to switch from ubuntu 10.04 amd64 Server to ubuntu 10.04 amd64 desktop but still the same failure. So I guess there is some error with X11 auth inside the tce.<br>
I'll go deeper inside tomorrow.<br>
<br>
Keep you informed<br>
<br>
Brgds Torsten<br>
<br>
<br>
Am 19.03.2012 um 17:36 schrieb "Stefan" <<a href="mailto:lists@nosolution.doesntexist.org" target="_blank">lists@nosolution.doesntexist.org</a>>:<br>
<div><div><br>
><br>
> Hi Torsten,<br>
><br>
> from your description and from the log-files it looks exactly like the problem<br>
> I described in the mail with subject:<br>
><br>
> Error: Aborting session with 'Unable to open<br>
><br>
> from yesterday.<br>
> Unfortunately I'm not any further ...<br>
><br>
> Hope anybody has an hint.<br>
> cheers<br>
> Stefan<br>
><br>
> Am Monday 19 March 2012 schrieb Torsten Bade:<br>
>> Hi all,<br>
>> I have actually the problem to connect via TCE to the server (fresh<br>
>> install),<br>
>> when I use the normal Client under e.g. Ubuntu, there is no problem, I can<br>
>> connect, work etc.<br>
>> The problem itself is only with TCE and I'm running in circles.<br>
>> System Ubuntu 10.04 amd64, Gnome<br>
>> x2goserver/xsession: 3.1.0.1<br>
>> x2gognomebindings: 2.0.1.3<br>
>><br>
>> Client boot up via pxe, everything perfect ... but then, when I try to<br>
>> connect:<br>
>> I get the popup Message :<br>
>> Connection failed head: cannot open<br>
>> /home/<username>/.x2go/C-XXXXXXXXXXX_stDGNOME-dp32/cmdoutput' for reading:<br>
>> No such file or directory sed: -e expression #1, char 4: unterminated 's'<br>
>> command.<br>
>><br>
>> When I say 'Show details' I get:<br>
>><br>
>> --->> SNIPP Show details <<---<br>
>> Proxy running in client mode with pid xxx<br>
>> Session: Starting session at xxx<br>
>> Info: Connecting to remote host 'localhost:31252'.<br>
>> (Here I was confused about localhost)<br>
>> Connection timeout, abortingInfo: Aborting the procedure due to signal<br>
>> '15'. --->> SNAPP Show details <<---<br>
>><br>
>> --->> SNIPP User Session.log <<---<br>
>> running as X2Go Agent<br>
>><br>
>> NXAGENT - Version 3.5.0<br>
>><br>
>> Copyright (C) 2001, 2011 NoMachine.<br>
>> See <a href="http://www.nomachine.com/" target="_blank">http://www.nomachine.com/</a> for more information.<br>
>><br>
>> Info: Agent running with pid '8932'.<br>
>> Session: Starting session at 'Fri Mar 16 18:28:17 2012'.<br>
>> Info: Proxy running in server mode with pid '8932'.<br>
>> Info: Waiting for connection from 'localhost' on port '30126'.<br>
>> Info: Aborting the procedure due to signal '1'.<br>
>> Error: Aborting session with 'Unable to open display<br>
>> 'nx/nx,options=/ofs/logon/torba/.x2go/C-torba-50-1331918896_stDGNOME_dp24/o<br>
>> ptions:50''. Session: Aborting session at 'Fri Mar 16 18:28:50 2012'.<br>
>> Session: Session aborted at 'Fri Mar 16 18:28:50 2012'.<br>
>><br>
>> --->> SNAPP <<---<br>
>><br>
>> I was so confused, that I added now the line:<br>
>> allowed_users=anybody<br>
>> into /etc/X11/Xwrapper.config ... but nothing<br>
>><br>
>> I can connect via ssh -X to the server and get for e.g. libreoffice<br>
>> displayed on my local machine.<br>
>> I tried different users ... nope ...same.<br>
>><br>
>> Hopefully somebody have a hint :)<br>
>><br>
>> Thanks in advance<br>
>> Torsten<br>
><br>
> _______________________________________________<br>
> X2Go-User mailing list<br>
> <a href="mailto:X2Go-User@lists.berlios.de" target="_blank">X2Go-User@lists.berlios.de</a><br>
> <a href="https://lists.berlios.de/mailman/listinfo/x2go-user" target="_blank">https://lists.berlios.de/mailman/listinfo/x2go-user</a><br>
</div></div></blockquote></div><br>