[X2Go-User] Problems "Installation of the X2Go TCE based on Debian"
Víctor Jiménez
victor.jimenez at elecnor-deimos.com
Mon Jun 2 09:59:22 CEST 2014
Hello, I would need your help
I followed the wiki “Installation of the X2Go TCE based on Debian“,and I
have not got that the thinclient starts the OS
I’ve had two cases:
Not installed “Provide firmware for certain hardware”:
- ThinClient Start Boot MenuàSelect X2Go TCEàToolbar status loaded
full, but nothing appears, only this message:
*[ 2.129610] sd 2:0:0:0: [sda] Assuming drive cache: write
through*
*[ 2.129951] sd 2:0:0:0: [sda] Assuming drive cache: write
through*
*[ 2.130546] sd 2:0:0:0: [sda] Assuming drive cache: write
through*
Installed “Provide firmware for certain hardware”:
When I add the repository
*deb http://ftp.debian.org/debian <http://ftp.debian.org/debian>
<distro-codename> main contrib non-free*
and install:
* apt-get install firmware-linux-nonfree firmware-bnx2 firmware-bnx2x
firmware-myricom firmware-netxen firmware-qlogic firmware-ralink
firmware-realtek intel-microcode amd64-microcode. *
Display this error:
*Processing triggers for man-db ...*
*locale: Cannot set LC_CTYPE to default locale: No such file or directory*
*locale: Cannot set LC_MESSAGES to default locale: No such file or
directory*
*locale: Cannot set LC_ALL to default locale: No such file or directory*
*Setting up firmware-bnx2 (0.36+wheezy.1) ...*
*update-initramfs: deferring update (trigger activated)*
*Setting up firmware-bnx2x (0.36+wheezy.1) ...*
*update-initramfs: deferring update (trigger activated)*
*Setting up firmware-linux-nonfree (0.36+wheezy.1) ...*
*update-initramfs: deferring update (trigger activated)*
*Setting up firmware-myricom (0.36+wheezy.1) ...*
*update-initramfs: deferring update (trigger activated)*
*Setting up firmware-netxen (0.36+wheezy.1) ...*
*update-initramfs: deferring update (trigger activated)*
*Setting up firmware-qlogic (0.36+wheezy.1) ...*
*update-initramfs: deferring update (trigger activated)*
*Setting up firmware-ralink (0.36+wheezy.1) ...*
*Setting up firmware-realtek (0.36+wheezy.1) ...*
*update-initramfs: deferring update (trigger activated)*
*Setting up iucode-tool (0.8.3-1) ...*
*Setting up amd64-microcode (1.20120910-2) ...*
*Updating microcode on all online processors...*
*update-initramfs: deferring update (trigger activated)*
*Setting up intel-microcode (1.20140122.1) ...*
*Updating microcode on all online processors...*
*update-initramfs: deferring update (trigger activated)*
*Processing triggers for initramfs-tools ...*
*update-initramfs: Generating /boot/initrd.img-3.2.0-4-486*
*cryptsetup: WARNING: could not determine root device from /etc/fstab*
*libkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open
moddep file '/lib/modules/3.13.0-24-generic/modules.dep.bin'*
*intel-microcode: cpuid MSR kernel support missing*
*intel-microcode: disabling IUCODE_TOOL_SCANCPUS option*
I ignore the error and continue the instructions.
When I turn on the thinclient Start Boot MenuàSelect X2Go TCEàToolbar
status loaded full, and display this error:
*[ 1.714560] sd 2:0:0:0: [sda] Assuming drive cache: write
through*
*[ 1.715139] sd 2:0:0:0: [sda] Assuming drive cache: write
through*
*[ 1.716151] sd 2:0:0:0: [sda] Assuming drive cache: write
through*
*[ 1.762616] platform microcode: firmware: agent aborted
loading intel-ucode/06-2d-02 (not dound?)*
What am I doing wrong? Can you help me? Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.x2go.org/pipermail/x2go-user/attachments/20140602/1875c331/attachment.html>
More information about the x2go-user
mailing list