[X2Go-User] x2gobroker on wheezy

Tue Oct 8 11:31:50 CEST 2013

Sorry was a mistake in the config file. Dunno which as the log didnt 
tell, but I restored the one from GIT and it worked.

On 10/08/2013 11:10 AM, Mathias Ewald wrote:
> Hi Mike,
>
> I am getting closer to a working setup :) Adding the parameters, of 
> course, helped. The Wiki doesn't tell about these so I am going to add 
> that later on. About the parameters though:
>
> http://***.***.***.***/x2gobroker/plain/inifile?user=mathias&password=********** 
>
>
> => Access granted.
>
>
> http://***.***.***.***/x2gobroker/plain/inifile?user=mathias&password=**********&task=listsessions 
>
>
> => 500: Internal Server Errror
>
> root at x2gobroker:/var/log/x2gobroker# tail -f -n 0 /var/log/x2gobroker/*
> ==> /var/log/x2gobroker/access.log <==
>
> ==> /var/log/x2gobroker/access.log.1 <==
>
> ==> /var/log/x2gobroker/authservice.log <==
>
> ==> /var/log/x2gobroker/authservice.log.1 <==
>
> ==> /var/log/x2gobroker/broker.log <==
>
> ==> /var/log/x2gobroker/broker.log.1 <==
>
> ==> /var/log/x2gobroker/error.log <==
>
> ==> /var/log/x2gobroker/wsgi.log <==
>
> ==> /var/log/x2gobroker/broker.log <==
> 2013-10-08 05:45:28,142 - broker - WARNING - GET http request 
> detected, if unwanted: disable X2GOBROKER_DEBUG
> 2013-10-08 05:45:28,147 - broker - INFO - client address is 79.249.103.51
> 2013-10-08 05:45:28,148 - broker - DEBUG - username: mathias, 
> password: XXXXX, task: listsessions, profile_id:
> 2013-10-08 05:45:28,149 - broker - DEBUG - 
> base_broker.X2GoBroker.get_authentication_mechanism(): found 
> default-auth-mech in global config section: pam
> 2013-10-08 05:45:28,149 - broker - DEBUG - 
> base_broker.X2GoBroker._do_authenticate(): authenticating user=mathias 
> with password=<hidden> against backend=inifile.
> 2013-10-08 05:45:28,149 - broker - DEBUG - connecting to 
> authentication service socket 
> /run/x2gobroker/x2gobroker-authservice.socket
> 2013-10-08 05:45:28,150 - broker - DEBUG - sending username=mathias, 
> password=<hidden>, service=x2gobroker to authentication service
> 2013-10-08 05:45:28,165 - broker - INFO - authentication against PAM 
> service »x2gobroker« succeeded for user »mathias«
> 2013-10-08 05:45:28,166 - broker - DEBUG - 
> base_broker.X2GoBroker.check_access(): result of authentication check 
> is: True
>
>
> x2goclient --broker-url=http://***.***.***.***/x2gobroker/plain/inifile
>
> Shows me a login screen but then says login failed with the same error 
> messages on the server as above.
>
>
> About the nightly builds: I need to get this working quickly. Once 
> that is done I will play with the nightly.
>
> cheers
> Mathias
>
>
>
> On 10/05/2013 02:44 PM, Mike Gabriel wrote:
>> Hi Mathias,
>>
>> ----- Original message -----
>>
>>> the installation works now, thanks! I left most of the configuration at
>>> defaults but changed to iniconf and enabled debug mode. Following the
>>> instructions to browse http://IP:80/x2gobroker/plain/iniconf shows this
>>> HTML:
>>>
>>> <html><title>404: Not Found</title><body>404: Not Found</body></html>
>> May this be related to using a wrong URL? It has to be inifile, not 
>> iniconf.
>>
>>> In the meantime, apache shows this
>> [...]
>>
>>> It's a bit confusing to see "X2GOBROKER_DEBUG: False" and then "if
>>> unwanted: disable X2GOBROKER_DEBUG". First line makes me think debug is
>>> not enabled, second says it is. But the real problem for now is that I
>>> expected to see the contents
>>> /etc/x2go/broker/x2gobroker-sessionprofiles.conf but saw 404 instead.
>>>
>>> Wrong expectations, or misconfiguration? :D
>> First, you have to give some parameters:
>>
>> <URL>?user=<user>&password=<pw>&task=listsessions
>>
>> If that is not somewhere in the wiki, then please add that piece of 
>> information. Thanks
>>
>> Then, you should really try out the version from the nightly builds 
>> which I am about to release (0.0.3.0). It would be cool if you could 
>> play with that one, because the we can get some more fixes into 0.0.3.0.
>>
>> Greets,
>> Mike
>