[X2go-dev] keyboard problem with x2go on maemo

Paul Menzel paulepanter at users.sourceforge.net
Wed Mar 11 11:01:27 CET 2009


Dear Heiko,


please do always reply to the list. I do not know if Roundcube has this
implemented yet, but you could use reply to all as an alternative and
remove my address.

And please also please reply inline.


Am Dienstag, den 10.03.2009, 17:28 +0100 schrieb Heiko Baumann:

> On Tue, 10 Mar 2009 08:03:19 +0100, Paul Menzel
> <paulepanter at users.sourceforge.net> wrote:
> > Dear Heiko,
> > 
> > 
> > Am Dienstag, den 10.03.2009, 00:57 +0100 schrieb Heiko Baumann:
> >  
> >> i am testing x2go with my n810 and ran into one problem. i cannot type a
> >> /.
> >> every other fn+x key combination works fine (@\()%# etc.) but if i try
> >> fn+j
> >> which should actually result in a / i only get a "j".
> >> 
> >> any help?
> > 
> > Well, I do not know. What versions are you using and what do the log
> > files say?
> > 
> > Did you try to see what xev reports?


> here is the xev output for fn+j:
> 
> KeyPress event, serial 34, synthetic NO, window 0x1800001,
>     root 0x54, subw 0x0, time 4046129730, (348,430), root:(352,461),
>     state 0x0, keycode 216 (keysym 0xfe03, ISO_Level3_Shift), same_screen
> YES,
>     XLookupString gives 0 bytes:
>     XmbLookupString gives 0 bytes:
>     XFilterEvent returns: False

This look strange. Or is the fn key ISO_Level3_Shift?

> KeyPress event, serial 34, synthetic NO, window 0x1800001,
>     root 0x54, subw 0x0, time 4046130051, (348,430), root:(352,461),
>     state 0x80, keycode 44 (keysym 0x6a, j), same_screen YES,
>     XLookupString gives 1 bytes: (6a) "j"
>     XmbLookupString gives 1 bytes: (6a) "j"
>     XFilterEvent returns: False
> 
> KeyRelease event, serial 34, synthetic NO, window 0x1800001,
>     root 0x54, subw 0x0, time 4046130187, (348,430), root:(352,461),
>     state 0x80, keycode 44 (keysym 0x6a, j), same_screen YES,
>     XLookupString gives 1 bytes: (6a) "j"
>     XFilterEvent returns: False
> 
> KeyRelease event, serial 34, synthetic NO, window 0x1800001,
>     root 0x54, subw 0x0, time 4046130284, (348,430), root:(352,461),
>     state 0x80, keycode 216 (keysym 0xfe03, ISO_Level3_Shift), same_screen
> YES,
>     XLookupString gives 0 bytes:
>     XFilterEvent returns: False
> 
> ClientMessage event, serial 34, synthetic YES, window 0x1800001,
>     message_type 0x46 (WM_PROTOCOLS), format 32, message 0x47
> (WM_DELETE_WINDOW)

Did you compare it to the output of a key combination that works?

> Versions are:
> 
> ii  nxcompshad                           3.3.0-2-1                     nx
> based library needed by the x2go system
> ii  x2goagent                            3.3.0-3-1                    
> Special NX-ized client, was developed by NoM
> ii  x2gohostadministration               2.0.1-4                       x2go
> host administration (kcontrol module)
> ii  x2goldaptools                        2.0.1-8                      
> x2goldaptools LDAP authentification tools fp
> ii  x2goserver                           2.0.1-19                     
> x2goserver (daemon and tools)
> ii  x2gosystemadministration             2.0.1-5                       x2go
> system administration/preference settin
> ii  x2gousbmount                         1.0.1-1                      
> clientside usb mass-storage device mounting
> ii  x2gouseradministration               2.0.1-8                       x2go
> user administration (kcontrol module)
> 
> 
> and my n810 runs:
> 
> ii  nxproxy                                            x2go-3.3.0-1-1      
>                       NX compression proxy
> ii  x2goclient                                         2.99-1              
>                       x2goclient qt4 client
> 
> 
> which logfiles i should check?

Good question ;-). There should be files under ~/.nx and on the server
nxserver.log under /var/log.


Since I am not an expert and x2go just uses FreeNX I would recommend to
you to ask on the freenx-knx mailing list [1].


Thanks,

Paul


[1] https://mail.kde.org/mailman/listinfo/freenx-knx
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 197 bytes
Desc: Dies ist ein digital signierter Nachrichtenteil
URL: <http://lists.x2go.org/pipermail/x2go-dev/attachments/20090311/96804f9d/attachment.pgp>


More information about the x2go-dev mailing list