[X2Go-Commits] [[X2Go Wiki]] page changed: doc:howto:tce

wiki-admin at x2go.org wiki-admin at x2go.org
Wed Jan 24 19:31:00 CET 2018


A page in your DokuWiki was added or changed. Here are the details:

Date        : 2018/01/24 18:31
Browser     : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.7.0
IP-Address  : 134.3.37.90
Hostname    : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de
Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1516818520
New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce
Edit Summary: added tcedebug description
User        : stefanbaur

@@ -850,8 +850,9 @@
    * ''nomagicpixel=1'' or ''nomagicpixel=2'' - you should set ''nomagicpixel=1'' while the "magic pixel" (clicking in the upper right corner of the screen will minimize a fullscreen session) is still active in thinclient mode (this feature is expected to be disabled at some point in the future). ''nomagicpixel=1'' will disable the window manager when exactly 3 windows are detected (that's the usual situation when a fullscreen session is active). It will re-enable
openbox whenever more or less than 3 windows are detected. If this fails for you, you can try ''nomagicpixel=2'', which will try to trigger on the window-minimize command and restore it to fullscreen (this will cause a short screen flickering effect). Note that ''nomagicpixel=2'' will make your ThinClient unusable when trying to run the actual X2Go-TCE client as a virtual machine guest (the //X2GoServer// you connect to may be a VM guest, no problems there). To live with the magic pixel bug, simply do not add this option at all.
    * ''ntp="server1 server2 ... servern"'' - this allows you to specify your own NTP server.  If this parameter is not used, time will be synced with standard Debian NTP servers.  To disable NTP syncing entirely, use ''ntp=false'' (feature available via github repo, soon via x2go repo too)
    * ''pubkey=tftp|http|https|ftp://your-http-server-ip-or-dns-here/x2go-tce/x2go-tce.authorized_keys'' - Allows you to add an ssh public key file to the ThinClient, so
your administrators can log in remotely using SSH. Note that this file needs to be chmodded 644, not 600, on the web server.  **Attention: Whoever manages to spoof this server name will have root access to your ThinClients.** Using HTTPS will mitigate this - an attacker would not only have to spoof the server name, but also the matching certificate.
    *  ''session=sessionname'' - use this to specify a session by name that should be pre-selected on startup. The name must be listed in the sessions file and may only contain characters from the following charset: //a-zA-Z0-9.:/ _-// (We suggest naming the default session ''default'' and using ''session=default''.) When using a session name with blanks, please enclose the sessionname in either single or double quotes, like so: ''session="session name"'' / ''session='session name'''
+   * ''tcedebug'' - this switches X2GoClient into debug mode and will also lead to increased logging to /var/log/x2goclient and to tty9
    * ''tcpprint'' -
Will allow you to use local LPT/USB printers like "dumb" network printers (listening to port 9100 and above). Requires MAC->IP mapping in DHCP server (and optionally, DNS->IP mapping), or static IPs - else your print jobs will end up on random devices. This setup is preferred over the X2GoClient's built-in printing for locally attached printers if X2GoServer and ThinClients are on the same network. It is not recommended when your X2Go connection goes across the internet or when the ThinClient is actually a laptop roaming between different networks. **Attention: When used without ''tcpprintonlyfrom'' (see below), this means anyone that can reach your thin client via e.g. ping can also send print jobs to it!**  
    * ''tcpprintonlyfrom=x.x.x.x'' - Will allow you to specify which IP address may connect to Port 9100 and above for printing to a locally attached LPT/USB printer. This should be the IP of your CUPS server or whatever print server system you use.  Understands the same syntax
as ''xinetd'''s ''only_from''. 
    * ''throttle=n|n:n:n:n:n'' - Will throttle down- and upload speed (''throttle=n'') or set throttling limits as follows: download:upload:smoothingtime:smoothinglength:latency. Defaults for up- and download are 10 (KiloBytes/s), 3.0 (seconds, using decimals is permitted) smoothingtime, 20 (KiloBytes), 0 (ms). for a detailed description of these parameters, see "man trickle". You can use the first 1, 2, 3, 4 or all 5 parameters. To set down- and/or upload speed to unlimited, use the letter "u" instead of a numeric value.
    * ''xinerama=left-of|right-of|above|below|same-as'' - Allows you to specify how multiple screens are handled (same-as clones the primary screen to all secondary screens, the other commands will cascade and thus expand the screen). Note that the current implementation will enforce "same-as" if it detects a touch screen driver (wacom) and no other pointing device. This is so you won't get stuck being unable to log off, for example,
due to your touch device being limited to one screen.


-- 
This mail was generated by DokuWiki at
https://wiki.x2go.org/



More information about the x2go-commits mailing list