[X2Go-Commits] [[X2Go Wiki]] page changed: wiki:advanced:tce:tested-hardware

wiki-admin at x2go.org wiki-admin at x2go.org
Mon Feb 12 16:39:49 CET 2018


A page in your DokuWiki was added or changed. Here are the details:

Date        : 2018/02/12 15:39
Browser     : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.7.2
IP-Address  : 134.3.37.90
Hostname    : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de
Old Revision: https://wiki.x2go.org/doku.php/wiki:advanced:tce:tested-hardware?rev=1518449179
New Revision: https://wiki.x2go.org/doku.php/wiki:advanced:tce:tested-hardware
Edit Summary: Added Dell/Wyse 3030
User        : stefanbaur

@@ -3,6 +3,7 @@
  ^  Hardware  ^  Features  ^  Comment  ^  Price  ^
- | [[https://www.thomas-krenn.com/de/produkte/low-energy-systeme/les/les-v3.html| Thomas-Krenn LESv3 ]] | Intel Celeron N3160 , 4 Core, 1.6 - 2.24GHz, Dual-HDMI-out, Single DisplayPort-Out, Analog Audio out, Dual Gigabit Ethernet, several USB3 ports, RS232 Serial Port, fanless, diskless by default (but allows internal SSD mounts). | Requires Debian-Stretch-based TCE - will not work
smoothly with Jessie or older (gfx hardware too new to be fully supported by Jessie and older). No problems with Stretch. When using HDMI out, you need to specify ''audioout=list'' and pick the proper boot parameter value from the console output on /dev/tty8 if you want to use sound via HDMI - the default is the analog audio jack. When using DisplayPort, depending on the screen used, you may need to specify boot parameters ''earlyblankdpmsfix'' or ''blankdpmsfix''. This issue is not the LESv3's fault, but a general issue some screens have when using DisplayPort - HDMI is unaffected. According to the manufacturer, it is possible to run this client with three screens if you attach a DisplayPort-VGA-Converter to the DisplayPort output. Lacking such an adapter ourselves, we did not test this functionality. We did test single-screen DisplayPort and single- as well as dual-screen HDMI. | ~250 + Tax including ram, power supply, casing, but without optional SSD |
+ |
[[http://www.dell.com/support/manuals/us/en/4/wyse-3030lt-thin-client/dell%20wyse%203030%20lt%20thin%20client/notes-cautions-and-warnings?guid=guid-5b8de7b7-879f-45a4-88e0-732155904029&lang=en-us| DELL/Wyse 3030 LT ]] | Intel Celeron N2807 Dual-Core-Prozessor - 1,6 GHz, 4GB internal flash memory (eMMC), 2 GB ram, several USB3 and USB2 ports, Dual-DisplayPort-Out (no Daisy-Chaining, two physical ports), single Gigabit Ethernet, internal audio (built-in speaker connected to soundcard), optional WiFi/BT | Will work with Debian Jessie and Debian Stretch images. Depending on the screen used, you may need to specify boot parameters ''earlyblankdpmsfix'' or ''blankdpmsfix''. This issue is not the 3030's fault, but a general issue some screens have when using DisplayPort - HDMI is unaffected, so you can use DisplayPort-HDMI-Adapter cables as well to make the effect go away. We did test single- as well as dual-screen DisplayPort, as well as HDMI via adapters. | ~ 250-500 + Tax, depending on
supplier, exact model and quantity discount | 
+ | [[https://www.thomas-krenn.com/de/produkte/low-energy-systeme/les/les-v3.html| Thomas-Krenn LESv3 ]] | Intel Celeron N3160 , 4 Core, 1.6 - 2.24GHz, Dual-HDMI-out, Single DisplayPort-Out, Analog Audio out, Dual Gigabit Ethernet, several USB3 ports, RS232 Serial Port, fanless, diskless by default (but allows internal SSD mounts). | Requires Debian-Stretch-based TCE - will not work smoothly with Jessie or older (gfx hardware too new to be fully supported by Jessie and older). No problems with Stretch. When using HDMI out, you need to specify ''audioout=list'' and pick the proper boot parameter value from the console output on /dev/tty8 if you want to use sound via HDMI - the default is the analog audio jack. When using DisplayPort, depending on the screen used, you may need to specify boot parameters ''earlyblankdpmsfix'' or ''blankdpmsfix''. This issue is not the LESv3's fault, but a general issue some screens have when using
DisplayPort - HDMI is unaffected. According to the supplier, it is possible to run this client with three screens if you attach a DisplayPort-VGA-Adapter cable to the DisplayPort output. Lacking such an adapter ourselves, we did not test this functionality. We did test single-screen DisplayPort and single- as well as dual-screen HDMI. | ~250 + Tax including ram, power supply, casing, but without optional SSD |
  | [[http://www.intel.com/products/desktop/motherboards/d945gsejt/d945gsejt-overview.htm|Intel D945GSEJT]] | + Fanless \\ - No Dual-Link DVI | Didn't work: x2Go was not able to connect the server and crashed a lot (unstable version?). Used Ubuntu & live-build (morty) | [[http://www.cartft.com/catalog/il/1085| ~200€]] including ram, power supply, casing |
  | [[http://www.rangee.de/site/de/thinclient/thinclient_uebersicht_864.html| Rangee LT360]] | + Fanless \\ + DVI + VGA \\ - No cardreader| Works fine on about 50 stations - more than 512 MB Ram recommended. Dual monitor not
tested. Used Debian custom-build (h1) | [[http://www.rangee.de/site/de/thinclient/thinclient_uebersicht/864.html| ~260€]] including ram, power supply, casing |
  | [[http://www.zotac.com/index.php?option=com_virtuemart&Itemid=100265&lang=de&vmcchk=1&Itemid=100265|ZOTAC FUSION350]] | + Fanless \\ +Displayport (2560 x 1440) \\ - No cardreader| Works fanless in a very airy case, a fan might be a good idea in summer | ~260 including ram, power supply, casing |
  | [[http://www.fit-pc.com/web/fit-pc/fit-pc3-info/ | fit-PC3 Pro ]] | + Fanless \\ +Displayport (2560 x 1440) \\ - No cardreader | Only the Pro-version supports displays >  1920 x 1200 | > 400€  |
@@ -16,8 +17,9 @@
  
  
  FIXME: This table should be merged into the upper one, and the entries sorted by test date, followed by hardware name.
  ^  Hardware  ^  Test date ^
+ | DELL/Wyse 3030 | Tested on 2018-02-12 |
  | Thomas-Krenn LESv3 | Tested on 2018-02-12 |
  | Zotac Zbox ID18 | Tested on 2014-03-17 |
  | Foxconn NT-i2847 |
Tested on 2014-01-30 |
  | MSI DC100 WE450 | Tested on 2014-01-30 |


-- 
This mail was generated by DokuWiki at
https://wiki.x2go.org/



More information about the x2go-commits mailing list