[X2Go-Commits] Build failed in Jenkins: x2gomatebindings+nightly+raspbian-stretch #1

jenkins at x2go.org jenkins at x2go.org
Tue Aug 22 01:43:51 CEST 2017


See <http://jenkins.x2go.org:8080/job/x2gomatebindings+nightly+raspbian-stretch/1/display/redirect>

------------------------------------------
[...truncated 18.97 KB...]
----------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
  sbuild-build-depends-core-dummy
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 784 B of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 copy:/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive ./ sbuild-build-depends-core-dummy 0.invalid.0 [784 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 784 B in 0s (45.6 kB/s)
Selecting previously unselected package sbuild-build-depends-core-dummy.
(Reading database ... 12688 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-core-dummy_0.invalid.0_armhf.deb ...
Unpacking sbuild-build-depends-core-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-core-dummy (0.invalid.0) ...

+------------------------------------------------------------------------------+
| Check architectures                                                          |
+------------------------------------------------------------------------------+

Arch check ok (armhf included in any)

+------------------------------------------------------------------------------+
| Install package build dependencies                                           |
+------------------------------------------------------------------------------+


Setup apt archive
-----------------

Merged Build-Depends: autotools-dev, debhelper (>= 7.0.50~), intltool, mate-common (>= 1.6.0), libmatedesktop-dev (>= 1.6.0) | libmate-desktop-dev (>= 1.6.0), libcaja-extension-dev (>= 1.6.0), pkg-config, libdconf-dev, libstartup-notification0-dev, sed, coreutils, lsb-release, bash
Filtered Build-Depends: autotools-dev, debhelper (>= 7.0.50~), intltool, mate-common (>= 1.6.0), libmatedesktop-dev (>= 1.6.0), libcaja-extension-dev (>= 1.6.0), pkg-config, libdconf-dev, libstartup-notification0-dev, sed, coreutils, lsb-release, bash
dpkg-deb: building package 'sbuild-build-depends-x2gomatebindings-dummy' in '/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive/sbuild-build-depends-x2gomatebindings-dummy.deb'.
dpkg-scanpackages: warning: Packages in archive but missing from override file:
dpkg-scanpackages: warning:   sbuild-build-depends-core-dummy sbuild-build-depends-x2gomatebindings-dummy
dpkg-scanpackages: info: Wrote 2 entries to output Packages file.
gpg: using "Sbuild Signer" as default secret key for signing
Ign:1 copy:/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive ./ InRelease
Get:2 copy:/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive ./ Release [963 B]
Get:3 copy:/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive ./ Release.gpg [370 B]
Ign:3 copy:/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive ./ Release.gpg
Get:4 copy:/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive ./ Sources [617 B]
Get:5 copy:/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive ./ Packages [687 B]
Fetched 2637 B in 1s (2340 B/s)
Reading package lists...
W: copy:///<<BUILDDIR>>/resolver-Qvuxpd/apt_archive/./Release.gpg: The key(s) in the keyring /etc/apt/trusted.gpg.d/sbuild-build-depends-archive.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: GPG error: copy:/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive ./ Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 0747BE0A5F51BC55
Get:1 http://packages.x2go.org/raspbian stretch InRelease [7034 B]
Ign:1 http://packages.x2go.org/raspbian stretch InRelease
Fetched 7034 B in 1s (6526 B/s)
Reading package lists...
W: http://packages.x2go.org/raspbian/dists/stretch/InRelease: The key(s) in the keyring /etc/apt/trusted.gpg.d/sbuild-build-depends-archive.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: GPG error: http://packages.x2go.org/raspbian stretch InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY E1F958385BFE2B6E
W: The repository 'http://packages.x2go.org/raspbian stretch InRelease' is not signed.
Reading package lists...

Install x2gomatebindings build dependencies (apt-based resolver)
----------------------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 sbuild-build-depends-x2gomatebindings-dummy : Depends: libmatedesktop-dev (>= 1.6.0) but it is not installable
E: Unable to correct problems, you have held broken packages.
apt-get failed.
E: Package installation failed
Not removing build depends: cloned chroot in use
/usr/bin/du: cannot access '/<<PKGBUILDDIR>>': No such file or directory
E: read_command failed to execute du
E: Cannot determine space needed for /<<PKGBUILDDIR>> (du failed)

Setup apt archive
-----------------

Merged Build-Depends: dose-distcheck
Filtered Build-Depends: dose-distcheck
dpkg-deb: building package 'sbuild-build-depends-dose3-dummy' in '/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive/sbuild-build-depends-dose3-dummy.deb'.
dpkg-scanpackages: warning: Packages in archive but missing from override file:
dpkg-scanpackages: warning:   sbuild-build-depends-core-dummy sbuild-build-depends-dose3-dummy sbuild-build-depends-x2gomatebindings-dummy
dpkg-scanpackages: info: Wrote 3 entries to output Packages file.
gpg: using "Sbuild Signer" as default secret key for signing
Ign:1 copy:/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive ./ InRelease
Get:2 copy:/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive ./ Release [963 B]
Get:3 copy:/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive ./ Release.gpg [370 B]
Ign:3 copy:/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive ./ Release.gpg
Get:4 copy:/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive ./ Sources [743 B]
Get:5 copy:/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive ./ Packages [804 B]
Fetched 2880 B in 1s (2484 B/s)
Reading package lists...
W: copy:///<<BUILDDIR>>/resolver-Qvuxpd/apt_archive/./Release.gpg: The key(s) in the keyring /etc/apt/trusted.gpg.d/sbuild-build-depends-archive.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: GPG error: copy:/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive ./ Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 0747BE0A5F51BC55
Get:1 http://packages.x2go.org/raspbian stretch InRelease [7034 B]
Ign:1 http://packages.x2go.org/raspbian stretch InRelease
Fetched 7034 B in 1s (6555 B/s)
Reading package lists...
W: http://packages.x2go.org/raspbian/dists/stretch/InRelease: The key(s) in the keyring /etc/apt/trusted.gpg.d/sbuild-build-depends-archive.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: GPG error: http://packages.x2go.org/raspbian stretch InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY E1F958385BFE2B6E
W: The repository 'http://packages.x2go.org/raspbian stretch InRelease' is not signed.
Reading package lists...

Install dose3 build dependencies (apt-based resolver)
-----------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
  dose-distcheck libelf1 liblua5.2-0 libnspr4 libnss3 libpopt0 librpm3
  librpmio3
Recommended packages:
  rpm-common
The following NEW packages will be installed:
  dose-distcheck libelf1 liblua5.2-0 libnspr4 libnss3 libpopt0 librpm3
  librpmio3 sbuild-build-depends-dose3-dummy
0 upgraded, 9 newly installed, 0 to remove and 0 not upgraded.
Need to get 4484 kB of archives.
After this operation, 10.1 MB of additional disk space will be used.
Get:1 copy:/<<BUILDDIR>>/resolver-Qvuxpd/apt_archive ./ sbuild-build-depends-dose3-dummy 0.invalid.0 [780 B]
Get:2 http://archive.raspbian.org/raspbian stretch/main armhf libpopt0 armhf 1.16-10 [46.2 kB]
Get:3 http://archive.raspbian.org/raspbian stretch/main armhf libelf1 armhf 0.168-1 [154 kB]
Get:4 http://archive.raspbian.org/raspbian stretch/main armhf liblua5.2-0 armhf 5.2.4-1.1 [82.8 kB]
Get:5 http://archive.raspbian.org/raspbian stretch/main armhf libnspr4 armhf 2:4.12-6 [94.8 kB]
Get:6 http://archive.raspbian.org/raspbian stretch/main armhf libnss3 armhf 2:3.26.2-1.1 [947 kB]
Get:7 http://archive.raspbian.org/raspbian stretch/main armhf librpmio3 armhf 4.12.0.2+dfsg1-2 [1152 kB]
Get:8 http://archive.raspbian.org/raspbian stretch/main armhf librpm3 armhf 4.12.0.2+dfsg1-2 [1223 kB]
Get:9 http://archive.raspbian.org/raspbian stretch/main armhf dose-distcheck armhf 5.0.1-8 [783 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 4484 kB in 0s (12.9 MB/s)
Selecting previously unselected package libpopt0:armhf.
(Reading database ... 12688 files and directories currently installed.)
Preparing to unpack .../0-libpopt0_1.16-10_armhf.deb ...
Unpacking libpopt0:armhf (1.16-10) ...
Selecting previously unselected package libelf1:armhf.
Preparing to unpack .../1-libelf1_0.168-1_armhf.deb ...
Unpacking libelf1:armhf (0.168-1) ...
Selecting previously unselected package liblua5.2-0:armhf.
Preparing to unpack .../2-liblua5.2-0_5.2.4-1.1_armhf.deb ...
Unpacking liblua5.2-0:armhf (5.2.4-1.1) ...
Selecting previously unselected package libnspr4:armhf.
Preparing to unpack .../3-libnspr4_2%3a4.12-6_armhf.deb ...
Unpacking libnspr4:armhf (2:4.12-6) ...
Selecting previously unselected package libnss3:armhf.
Preparing to unpack .../4-libnss3_2%3a3.26.2-1.1_armhf.deb ...
Unpacking libnss3:armhf (2:3.26.2-1.1) ...
Selecting previously unselected package librpmio3.
Preparing to unpack .../5-librpmio3_4.12.0.2+dfsg1-2_armhf.deb ...
Unpacking librpmio3 (4.12.0.2+dfsg1-2) ...
Selecting previously unselected package librpm3.
Preparing to unpack .../6-librpm3_4.12.0.2+dfsg1-2_armhf.deb ...
Unpacking librpm3 (4.12.0.2+dfsg1-2) ...
Selecting previously unselected package dose-distcheck.
Preparing to unpack .../7-dose-distcheck_5.0.1-8_armhf.deb ...
Unpacking dose-distcheck (5.0.1-8) ...
Selecting previously unselected package sbuild-build-depends-dose3-dummy.
Preparing to unpack .../8-sbuild-build-depends-dose3-dummy_0.invalid.0_armhf.deb ...
Unpacking sbuild-build-depends-dose3-dummy (0.invalid.0) ...
Setting up libpopt0:armhf (1.16-10) ...
Setting up libelf1:armhf (0.168-1) ...
Setting up libnspr4:armhf (2:4.12-6) ...
Processing triggers for libc-bin (2.24-11+deb9u1) ...
Setting up liblua5.2-0:armhf (5.2.4-1.1) ...
Setting up libnss3:armhf (2:3.26.2-1.1) ...
Setting up librpmio3 (4.12.0.2+dfsg1-2) ...
Setting up librpm3 (4.12.0.2+dfsg1-2) ...
Setting up dose-distcheck (5.0.1-8) ...
Setting up sbuild-build-depends-dose3-dummy (0.invalid.0) ...
Processing triggers for libc-bin (2.24-11+deb9u1) ...
(I)StdLoaders: Parsing and normalizing...
(I)Packages: Parsing Packages file -...
(I)Format822: total packages 55713
(I)Distcheck: Cudf Universe: 55713 packages
(I)Distcheck: --checkonly specified, consider all packages as background packages
(I)Distcheck: Solving...
output-version: 1.2
native-architecture: armhf
report:
 -
  package: sbuild-build-depends-x2gomatebindings-dummy
  version: 0.invalid.0
  architecture: armhf
  status: broken
  reasons:
   -
    missing:
     pkg:
      package: sbuild-build-depends-x2gomatebindings-dummy
      version: 0.invalid.0
      architecture: armhf
      unsat-dependency: libmatedesktop-dev:armhf (>= 1.6.0)
 
background-packages: 55712
foreground-packages: 1
total-packages: 55713
broken-packages: 1

+------------------------------------------------------------------------------+
| Cleanup                                                                      |
+------------------------------------------------------------------------------+

Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
E: Package build dependencies not satisfied; skipping

+------------------------------------------------------------------------------+
| Summary                                                                      |
+------------------------------------------------------------------------------+

Build Architecture: armhf
Build Type: full
Build-Space: n/a
Build-Time: 0
Distribution: stretch
Fail-Stage: install-deps
Host Architecture: armhf
Install-Time: 0
Job: /home/_jenkins_/tmp/tmp.ww3WQGZ2yYnwaJh6Gtvw44aX/x2gomatebindings_0.0.1.5-0~x2go1~git20170822.200+9.heuler.1.dsc
Machine Architecture: amd64
Package: x2gomatebindings
Package-Time: 0
Source-Version: 0.0.1.5-0~x2go1~git20170822.200+9.heuler.1
Space: n/a
Status: given-back
Version: 0.0.1.5-0~x2go1~git20170822.200+9.heuler.1
--------------------------------------------------------------------------------
Finished at 2017-08-21T23:42:04Z
Build needed 00:00:00, no disk space
E: Package build dependencies not satisfied; skipping
+ cleanup
+ typeset temp_dir=
+ for temp_dir in "${temp_cleanup[@]}"
+ '[' -n '' ']'
+ for temp_dir in "${temp_cleanup[@]}"
+ '[' -n /var/lib/jenkins/tmp/tmp.ww3WQGZ2yYnwaJh6Gtvw44aX ']'
+ '[' -d /var/lib/jenkins/tmp/tmp.ww3WQGZ2yYnwaJh6Gtvw44aX ']'
+ rm -Rf -- /var/lib/jenkins/tmp/tmp.ww3WQGZ2yYnwaJh6Gtvw44aX
Build step 'Execute shell' marked build as failure


More information about the x2go-commits mailing list