[X2Go-Commits] [[X2Go Wiki]] page changed: doc:howto:tce

wiki-admin at x2go.org wiki-admin at x2go.org
Thu Dec 22 17:10:20 CET 2016


A page in your DokuWiki was added or changed. Here are the details:

Date        : 2016/12/22 16:10
Browser     : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0
IP-Address  : 78.43.90.159
Hostname    : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de
Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1482422968
New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce
Edit Summary: 
User        : stefanbaur

@@ -53,17 +53,9 @@
                          --backports true'
  export LBX2GO_ARCHIVE_AREAS="main contrib non-free"
  </code>
  
- ===== Netbooting =====
- 
- ==== Prerequisites ====
-   * You need an existing DHCP/PXE/TFTP setup with the usual pxelinux.0/pxelinux.cfg boot and configuration files, and a directory where kernel and initrd can be stored.  This is not covered here, though we might add a separate howto for that some time later on.
-   * You will also need an HTTP/FTP server with a dedicated IP (no name-based virtual hosts)
for the squashfs image.
-     * This image cannot be deployed via TFTP as it is too large - some TFTP servers refuse to serve files lager than 32MB, and some TFTP clients have problems with that as well.
-     * Also, even if you have a TFTP server/client combination that handles files larger than 32 MB, it will still be waaaay slower than the HTTP/FTP transfer.
- 
- ==== Building your own netbootable X2Go-TCE image ====
+ ==== Building your own X2Go-TCE image ====
  
  === Starting the build ===
  Change to a directory where you want to save your builds, and run the following commands:<code>
  # Set everything up for netboot-image creation
@@ -112,8 +104,17 @@
      fi
      cd ..
  fi
  </code>
+ 
+ 
+ ===== Netbooting =====
+ 
+ ==== Prerequisites ====
+   * You need an existing DHCP/PXE/TFTP setup with the usual pxelinux.0/pxelinux.cfg boot and configuration files, and a directory where kernel and initrd can be stored.  This is not covered here, though we might add a separate
howto for that some time later on.
+   * You will also need an HTTP/FTP server with a dedicated IP (no name-based virtual hosts) for the squashfs image.
+     * This image cannot be deployed via TFTP as it is too large - some TFTP servers refuse to serve files lager than 32MB, and some TFTP clients have problems with that as well.
+     * Also, even if you have a TFTP server/client combination that handles files larger than 32 MB, it will still be waaaay slower than the HTTP/FTP transfer.
  
  ==== Setting up your own netbootable X2Go-TCE environment ====
  
  === Adding the X2Go-TCE files to your Boot and Web Server(s) ===


-- 
This mail was generated by DokuWiki at
http://wiki.x2go.org/



More information about the x2go-commits mailing list