[X2Go-Commits] [[X2Go Wiki]] page changed: doc:howto:tce
wiki-admin at x2go.org
wiki-admin at x2go.org
Thu Dec 15 04:59:18 CET 2016
A page in your DokuWiki was added or changed. Here are the details:
Date : 2016/12/15 03:59
Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0
IP-Address : 78.43.90.159
Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de
Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481774306
New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce
Edit Summary: [Final Steps to boot a ThinClient]
User : stefanbaur
@@ -220,22 +220,23 @@
* log on to your HTTP or FTP server and change to the x2go-tce directory in your webroot/ftproot.
* copy the x2go-tce.xorg.conf file (or whatever you named it) with your desired configuration to this directory.
==== Final Steps to boot a ThinClient ====
- To boot your first X2Go-TCE ThinClient (again, this is assuming you already have an existing, working PXE/TFTP server setup in place)
+ === To boot your first X2Go-TCE ThinClient ===
+ Again, this is assuming you
already have an existing, working PXE/TFTP server setup in place.
* Determine the MAC address of your ThinClient. In the following example, we will assume it is ''AA-BB-CC-DD-EE-FF''.
* Change to the pxelinux.cfg directory in your tftproot.
* create a symlink with the name ''01-AA-BB-CC-DD-EE-FF'' (note the extra "01-" at the beginning) pointing to x2go-tce.
* After that, your ThinClient should boot the X2Go-TCE image.
- To make the X2Go-TCE image the default and only boot image:
+ === To make the X2Go-TCE image the default and only boot image ===
* Change to the pxelinux.cfg directory in your tftproot.
* run ''ls -lah default''
* Make a note where this symlink points to, if it is a symlink.
* If it is not a symlink, but a regular file, rename it e.g. to ''default-before-x2go-tce''
* create a new symlink named ''default'' that points to ''x2go-tce''
- To create several configurations to accommodate varying hardware/use cases, but all booting
the same basic image:
+ === To create several configurations to accommodate varying hardware/use cases, but all booting the same basic image ===
* Change to the pxelinux.cfg directory in your tftproot.
* copy the file x2go-tce to an appropriate name, like x2go-tce-debug or x2go-tce-P4-whitebox-with-crappy-VGA
* you can create as many such configuration files as you want, and edit them according to the use case
* to make a particular client boot a particular configuration,
--
This mail was generated by DokuWiki at
http://wiki.x2go.org/
More information about the x2go-commits
mailing list