[X2Go-Commits] [[X2Go Wiki]] page changed: doc:howto:tce
wiki-admin at x2go.org
wiki-admin at x2go.org
Wed Dec 14 20:26:47 CET 2016
A page in your DokuWiki was added or changed. Here are the details:
Date : 2016/12/14 19:26
Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0
IP-Address : 78.43.90.159
Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de
Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481743350
New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce
Edit Summary: [Prerequisites]
User : stefanbaur
@@ -17,10 +17,12 @@
===== Netbooting =====
==== Prerequisites ====
- * You need an existing PXE/TFTP setup with the usual pxelinux.0/pxelinux.cfg stuff. This is not covered here, though we might add a separate howto for that some time later on.
- * You will also need an HTTP/FTP server with a dedicated IP (no name-based virtual hosts)
+ * You need an existing PXE/TFTP setup with the usual pxelinux.0/pxelinux.cfg boot and configuration files, and a directory where kernel and initrd can be stored. This is
not covered here, though we might add a separate howto for that some time later on.
+ * You will also need an HTTP/FTP server with a dedicated IP (no name-based virtual hosts) for the squashfs image.
+ * This image cannot be deployed via TFTP as it is too large - some TFTP servers refuse to serve files lager than 32MB, and some TFTP clients have problems with that as well.
+ * Also, even if you have a TFTP server/client combination that handles files larger than 32 MB, it will still be waaaay slower than the HTTP/FTP transfer.
==== Building your own netbootable X2Go-TCE image ====
=== Starting the build ===
--
This mail was generated by DokuWiki at
http://wiki.x2go.org/
More information about the x2go-commits
mailing list