[X2Go-Commits] Build failed in Jenkins: x2gognomebindings+nightly+sled-11.2 #2

jenkins at x2go.org jenkins at x2go.org
Sun Feb 1 22:23:29 CET 2015


See <http://jenkins.x2go.org:8080/job/x2gognomebindings+nightly+sled-11.2/2/changes>

Changes:

[mike.gabriel] x2gognomebindings.spec: Always set BuildRoot: parameter.

[mike.gabriel] On SUSE, GConf2-devel is named gconf2-devel.

------------------------------------------
[...truncated 586 lines...]
[   96s] **** write config for pam_ssh.so (session, disabled)
[   96s] **** write config for pam_selinux.so (session, disabled)
[   96s] **** write config for pam_gnome_keyring.so (session, disabled)
[   96s] **** write config for pam_exec.so (session, disabled)
[   96s] **** write config for pam_env.so (session, disabled)
[   96s] [182/234] installing haveged-1.3-0.6.1
[   96s] [183/234] installing xorg-x11-libXp-devel-7.4-1.14
[   96s] [184/234] installing rpmlint-mini-1.0-214.39.1
[   96s] [185/234] installing xorg-x11-libXv-devel-7.4-1.14
[   96s] [186/234] installing xorg-x11-libXpm-devel-7.4-1.17
[   96s] [187/234] installing pwdutils-3.2.15-0.13.1
[   96s] [188/234] installing xorg-x11-libXmu-devel-7.4-1.17
[   97s] [189/234] installing glib2-devel-2.22.5-0.2.23
[   97s] [190/234] installing xorg-x11-libs-7.4-8.26.32.1
[   97s] [191/234] installing rpmlint-Factory-1.0-44.21
[   97s] [192/234] installing libgcrypt11-1.5.0-0.13.14
[   97s] [193/234] installing dbus-1-1.2.10-3.23.1
[   98s] [194/234] installing orbit2-devel-2.14.17-2.7.8
[   98s] [195/234] installing cairo-1.8.8-2.1.48
[   98s] [196/234] installing xorg-x11-libXprintUtil-devel-7.4-1.17
[   98s] [197/234] installing dbus-1-devel-1.2.10-3.23.1
[   98s] [198/234] installing libavahi-client3-0.6.23-11.19.22
[   98s] [199/234] installing dbus-1-glib-0.76-34.22.1
[   98s] [200/234] installing libxslt-1.1.24-19.15
[   99s] [201/234] installing pango-1.26.2-1.3.1
[   99s] [202/234] installing xorg-x11-devel-7.4-8.26.32.1
[   99s] [203/234] installing cairo-devel-1.8.8-2.1.48
[   99s] [204/234] installing dbus-1-glib-devel-0.76-34.22.1
[  100s] [205/234] installing gtk-doc-1.11-3.6.48
[  100s] [206/234] installing pango-devel-1.26.2-1.3.1
[  100s] [207/234] installing gnome-desktop-lang-2.28.2-0.6.18
[  100s] [208/234] installing gnome-doc-utils-lang-0.18.1-1.2.4
[  100s] [209/234] installing libtasn1-3-1.5-1.24.41
[  100s] [210/234] installing libatk-1_0-0-1.28.0-1.2.28
[  100s] [211/234] installing PolicyKit-0.9-14.39.1
[  101s] [212/234] installing atk-1.28.0-1.2.28
[  101s] [213/234] installing gnome-desktop-2.28.2-0.6.18
[  101s] [214/234] installing libtasn1-1.5-1.24.41
[  101s] [215/234] installing gnome-doc-utils-0.18.1-1.2.4
[  101s] [216/234] installing ConsoleKit-0.2.10-64.65.1
[  102s] [217/234] installing gtk2-2.18.9-0.21.4
[  102s] [218/234] installing atk-devel-1.28.0-1.2.28
[  103s] [219/234] installing gnome-common-2.28.0-1.1.38
[  103s] [220/234] installing libunique-1_0-0-1.1.2-1.1.279
[  103s] [221/234] installing gconf2-2.28.0-1.6.10
[  103s] Must specify some schema files to install
[  103s] [222/234] installing gconf2-lang-2.28.0-1.6.10
[  104s] [223/234] installing gconf2-devel-2.28.0-1.6.10
[  104s] [224/234] installing gnome-keyring-2.28.2-1.14.30
[  125s] [225/234] installing libgnome-desktop-2-11-2.28.2-0.6.18
[  125s] [226/234] installing gtk2-devel-2.18.9-0.21.4
[  126s] [227/234] installing gnome-keyring-lang-2.28.2-1.14.30
[  126s] [228/234] installing gnome-desktop-devel-2.28.2-0.6.18
[  126s] [229/234] installing gvfs-1.4.3-0.13.1
[  126s] [230/234] installing gvfs-lang-1.4.3-0.13.1
[  126s] [231/234] installing libgvfscommon0-1.4.3-0.13.1
[  127s] [232/234] installing nautilus-2.28.4-1.10.1
[  138s] [233/234] installing nautilus-lang-2.28.4-1.10.1
[  138s] [234/234] installing nautilus-devel-2.28.4-1.10.1
[  138s] removing nis flags from /var/cache/obs-build/sle/11.2/x86_64/etc/nsswitch.conf...
[  138s] now finalizing build dir...
[  138s] Checking permissions and ownerships - using the permissions files
[  138s] 	/tmp/Check.perms.Ya5CEI
[  138s] setting /dev/full to root:root 0666. (wrong permissions 0622)
[  138s] Starting SuSEconfig, the SuSE Configuration Tool...
[  138s] Running in full featured mode.
[  138s] Reading /etc/sysconfig and updating the system...
[  138s] Executing /sbin/conf.d/SuSEconfig.desktop-file-utils...
[  138s] Executing /sbin/conf.d/SuSEconfig.glib2...
[  139s] Executing /sbin/conf.d/SuSEconfig.groff...
[  139s] Executing /sbin/conf.d/SuSEconfig.gtk2...
[  139s] Executing /sbin/conf.d/SuSEconfig.permissions...
[  139s] Finished.
[  140s] -----------------------------------------------------------------
[  140s] ----- building x2gognomebindings.spec (user abuild)
[  140s] -----------------------------------------------------------------
[  140s] -----------------------------------------------------------------
[  140s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature /usr/src/packages/SOURCES/x2gognomebindings.spec
[  140s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.24071
[  140s] + umask 022
[  140s] + cd /usr/src/packages/BUILD
[  140s] + cd /usr/src/packages/BUILD
[  140s] + rm -rf x2gognomebindings-2.0.2.2
[  140s] + tar -xf -
[  140s] + /usr/bin/gzip -dc /usr/src/packages/SOURCES/x2gognomebindings-2.0.2.2.tar.gz
[  140s] + STATUS=0
[  140s] + '[' 0 -ne 0 ']'
[  140s] + cd x2gognomebindings-2.0.2.2
[  140s] ++ /usr/bin/id -u
[  140s] + '[' 399 = 0 ']'
[  140s] ++ /usr/bin/id -u
[  140s] + '[' 399 = 0 ']'
[  140s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
[  140s] + exit 0
[  140s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.24071
[  140s] + umask 022
[  140s] + cd /usr/src/packages/BUILD
[  140s] + /bin/rm -rf /var/tmp/x2gognomebindings-2.0.2.2-build
[  140s] ++ dirname /var/tmp/x2gognomebindings-2.0.2.2-build
[  140s] + /bin/mkdir -p /var/tmp
[  140s] + /bin/mkdir /var/tmp/x2gognomebindings-2.0.2.2-build
[  140s] + cd x2gognomebindings-2.0.2.2
[  140s] + '[' '!' -e configure ']'
[  140s] + ./autogen.sh
[  140s] /usr/bin/gnome-autogen.sh
[  140s] checking for autoconf >= 2.53...
[  140s]   testing autoconf2.50... not found.
[  140s]   testing autoconf... found 2.63
[  140s] checking for automake >= 1.7...
[  140s]   testing automake-1.11... not found.
[  141s]   testing automake-1.10... found 1.10.1
[  141s] checking for libtool >= 1.4.3...
[  141s]   testing libtoolize... found 2.2.6
[  141s] checking for glib-gettext >= 2.2.0...
[  141s]   testing glib-gettextize... found 2.22.5
[  141s] checking for intltool >= 0.25...
[  141s]   testing intltoolize... found 0.40.5
[  141s] checking for pkg-config >= 0.14.0...
[  141s]   testing pkg-config... found 0.23
[  141s] Checking for required M4 macros...
[  141s] Checking for forbidden M4 macros...
[  141s] **Warning**: I am going to run `configure' with no arguments.
[  141s] If you wish to pass any to it, please specify them on the
[  141s] `./autogen.sh' command line.
[  141s] 
[  141s] Processing ./configure.ac
[  141s] Running libtoolize...
[  141s] libtoolize: putting auxiliary files in `.'.
[  141s] libtoolize: copying file `./ltmain.sh'
[  141s] libtoolize: You should add the contents of the following files to `aclocal.m4':
[  141s] libtoolize:   `/usr/share/aclocal/libtool.m4'
[  141s] libtoolize:   `/usr/share/aclocal/ltoptions.m4'
[  141s] libtoolize:   `/usr/share/aclocal/ltversion.m4'
[  141s] libtoolize:   `/usr/share/aclocal/ltsugar.m4'
[  141s] libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
[  141s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
[  141s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
[  141s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
[  141s] Running glib-gettextize... Ignore non-fatal messages.
[  142s] Copying file mkinstalldirs
[  142s] Copying file po/Makefile.in.in
[  142s] 
[  142s] Please add the files
[  142s]   codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
[  142s]   progtest.m4
[  142s] from the /usr/share/aclocal directory to your autoconf macro directory
[  142s] or directly to your aclocal.m4 file.
[  142s] You will also need config.guess and config.sub, which you can get from
[  142s] ftp://ftp.gnu.org/pub/gnu/config/.
[  142s] 
[  142s] Running intltoolize...
[  142s] Running aclocal-1.10...
[  143s] Running autoconf...
[  145s] Running autoheader...
[  145s] Running automake-1.10...
[  146s] configure.ac:14: installing `./config.guess'
[  146s] configure.ac:14: installing `./config.sub'
[  146s] configure.ac:6: installing `./install-sh'
[  146s] configure.ac:6: installing `./missing'
[  146s] extension/Makefile.am: installing `./depcomp'
[  146s] Running ./configure --enable-maintainer-mode ...
[  147s] checking for a BSD-compatible install... /usr/bin/install -c
[  148s] checking whether build environment is sane... yes
[  148s] checking for a thread-safe mkdir -p... /bin/mkdir -p
[  148s] checking for gawk... gawk
[  148s] checking whether make sets $(MAKE)... yes
[  148s] checking whether to enable maintainer-specific portions of Makefiles... yes
[  148s] checking for gcc... gcc
[  148s] checking for C compiler default output file name... a.out
[  148s] checking whether the C compiler works... yes
[  148s] checking whether we are cross compiling... no
[  148s] checking for suffix of executables... 
[  148s] checking for suffix of object files... o
[  148s] checking whether we are using the GNU C compiler... yes
[  148s] checking whether gcc accepts -g... yes
[  148s] checking for gcc option to accept ISO C89... none needed
[  148s] checking for style of include used by make... GNU
[  148s] checking dependency style of gcc... gcc3
[  149s] checking build system type... x86_64-suse-linux-gnu
[  149s] checking host system type... x86_64-suse-linux-gnu
[  149s] checking for a sed that does not truncate output... /usr/bin/sed
[  149s] checking for grep that handles long lines and -e... /usr/bin/grep
[  149s] checking for egrep... /usr/bin/grep -E
[  149s] checking for fgrep... /usr/bin/grep -F
[  149s] checking for ld used by gcc... /usr/x86_64-suse-linux/bin/ld
[  149s] checking if the linker (/usr/x86_64-suse-linux/bin/ld) is GNU ld... yes
[  149s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
[  149s] checking the name lister (/usr/bin/nm -B) interface... BSD nm
[  149s] checking whether ln -s works... yes
[  149s] checking the maximum length of command line arguments... 1572864
[  149s] checking whether the shell understands some XSI constructs... yes
[  149s] checking whether the shell understands "+="... yes
[  149s] checking for /usr/x86_64-suse-linux/bin/ld option to reload object files... -r
[  149s] checking for objdump... objdump
[  149s] checking how to recognize dependent libraries... pass_all
[  149s] checking for ar... ar
[  149s] checking for strip... strip
[  149s] checking for ranlib... ranlib
[  149s] checking command to parse /usr/bin/nm -B output from gcc object... ok
[  150s] checking how to run the C preprocessor... gcc -E
[  150s] checking for ANSI C header files... yes
[  150s] checking for sys/types.h... yes
[  150s] checking for sys/stat.h... yes
[  150s] checking for stdlib.h... yes
[  151s] checking for string.h... yes
[  151s] checking for memory.h... yes
[  151s] checking for strings.h... yes
[  151s] checking for inttypes.h... yes
[  151s] checking for stdint.h... yes
[  151s] checking for unistd.h... yes
[  151s] checking for dlfcn.h... yes
[  151s] checking for objdir... .libs
[  152s] checking if gcc supports -fno-rtti -fno-exceptions... no
[  152s] checking for gcc option to produce PIC... -fPIC -DPIC
[  152s] checking if gcc PIC flag -fPIC -DPIC works... yes
[  152s] checking if gcc static flag -static works... yes
[  152s] checking if gcc supports -c -o file.o... yes
[  152s] checking if gcc supports -c -o file.o... (cached) yes
[  152s] checking whether the gcc linker (/usr/x86_64-suse-linux/bin/ld -m elf_x86_64) supports shared libraries... yes
[  152s] checking whether -lc should be explicitly linked in... no
[  152s] checking dynamic linker characteristics... GNU/Linux ld.so
[  152s] checking how to hardcode library paths into programs... immediate
[  152s] checking whether stripping libraries is possible... yes
[  152s] checking if libtool supports shared libraries... yes
[  152s] checking whether to build shared libraries... yes
[  152s] checking whether to build static libraries... no
[  152s] checking for a BSD-compatible install... /usr/bin/install -c
[  152s] checking whether make sets $(MAKE)... (cached) yes
[  152s] checking for pkg-config... /usr/bin/pkg-config
[  152s] checking pkg-config is at least version 0.9.0... yes
[  152s] checking for NAUTILUS_X2GOUMOUNT... configure: error: Package requirements (	 glib-2.0 >= 2.4.0                	 gtk+-2.0    >= 2.4.0             	 gmodule-2.0 >= 2.4.0		  	 libgnome-2.0 >= 2.7.0) were not met:
[  152s] 
[  152s] No package 'libgnome-2.0' found
[  152s] 
[  152s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[  152s] installed software in a non-standard prefix.
[  152s] 
[  152s] Alternatively, you may set the environment variables NAUTILUS_X2GOUMOUNT_CFLAGS
[  152s] and NAUTILUS_X2GOUMOUNT_LIBS to avoid the need to call pkg-config.
[  152s] See the pkg-config man page for more details.
[  152s] 
[  152s] error: Bad exit status from /var/tmp/rpm-tmp.24071 (%build)
[  152s] 
[  152s] 
[  152s] RPM build errors:
[  152s]     Bad exit status from /var/tmp/rpm-tmp.24071 (%build)
+ rm -Rf /var/lib/jenkins/tmp/tmp.BTiLbKl2DQ
+ exit -1
Build step 'Execute shell' marked build as failure


More information about the x2go-commits mailing list